Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹32.0 LAccepted-AOC | L-1 | Accepted-AOC Being L-1 | |
| 2 | L-2₹38.0 L+₹5.4 L (16.8%)Rejected-AOC 1723 GUPTA AND SONS SECTOR 39 B CHANDIGARH CHANDIGARH CHANDIGARH 160036 UDYAM CH 01 0042756 | CHANDIGARH | CHANDIGARH | 160036 | L-2 | Rejected-AOC Other than L-1 | |
| 3 | L-3₹41.8 L+₹9.3 L (28.7%)Rejected-AOC G 5 2 1 PANCHADEEP CO OP HSG SOCIETY SECTOR 29 VASHI NAVI MUMBAI 400 703 | THANE | MAHARASHTRA | 400703 | L-3 | Rejected-AOC Other than L-1 | |
| 4 | L-4₹43.0 L+₹10.5 L (32.2%)Rejected-AOC ASTBAL MOHALLA BANASAR BAGH ROAD PATIALA GATE SANGRUR 148001 | SANGRUR | SANGRUR | PUNJAB | 148001 | L-4 | Rejected-AOC Other than L-1 |
Tender Value
₹55 L
EMD Value
₹1.1 L
Closing Date
20 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Chandimandir
HQ CWE Chandimandir PIN-134107
CWE/CHM-29/2024-25 REPAIR TO ROOF OF BUILDING OF JCO/OR MD ACCN IN SECTOR D AND F UNDER AGE B/R-I OF GE CHANDIMANDIR AT CHANDIMANDIR MIL STN
2024_MES_660040_1
CWE/CHM-29/2024-25
Open Tender
Miscellaneous Works
Item Rate
180 days
GE Chandimandir
Class C cate a(i)
9 documents required · 9 mandatory
₹1,000
GE Chandimandir
₹1.1 L
14 Nov 2024
15 Jun 2024
22 Jul 2024
15 Jun 2024
20 Jul 2024
6 Jul 2024
15 Jun 2024 - 20 Jun 2024
Amount
Dismantling Brick tiles or terracing tiles, single layer on roofs complete all as specified and as directed by Engineer-in-charge.
Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and as directed by Engineer-in-charge.
M&L for PCC 1:3:6 type B-1 (using 20 mm graded stone aggegates) cement concrete as in roof padding, mass concrete complete all as specified and as directed by Engineer-in-charge.
M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggegates) cement concrete as in roof kerbs rounded or chemfered on edges complete all as specified and as directed by Engineer-in-charge.
Material and labour for APP based polymeric membrane 3mm thick, minimum weight 3 kg/Sqm, reinforced with polyester non woven fabric (weight not less than 150 gms/sqm) laid on primed surface by torch application over and including bituminous primer @ 0.40 ltrs per square metre, complete all as specified and as directed by Engineer-in-charge.
Material and Labour for 40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar 1:3 and pointed in cement mortar 1:3 as the work proceed mixed with 5% of crude oil by weight of cement over and including (1:6) cement mortar 15 mm thick complete all as specified and as directed by Engineer-in-charge.
All as per Serial item No 6.00 here-in-before but except tiles complete all as specified and as directed by Engineer-in-charge.
Cutting grooves in brick wall,75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 all as specified and directed.
Demolition of brickwork or precast concrete articles, built in cement mortar including all quoins, arches, pillars, etc, including ashlar facings dressed stone work all as specified
M&L for Brick work with sub class ‘B’ brick, straight or curved as plan exc 6m mean radius built in cement mortar 1:6 complete complete all as specified and directed by Engineer-in-charge.
M & L for Wire brushing and cleaning top surface, terracing or cement concrete, includng flashings and junction of parapets etc including 3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3.6kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gms/sqm) laid over a coat of oil bound bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS. The membrane shall be laid using butane torch and sealing all joints etc having 75mm side lap joint and 100m end lap joint after preparing the surface as per standard practice and as per manufacturer instructions including dismantling of existing felt /treatment, complete all as specified and directed by Engineer-in-charge.
M & L for applying one coat of bituminous aluminium paint over APP membrane complete all as specified and directed.
Disconnecting existing tanks, (500 ltr tank) setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required, reconnecting and re-fixing in position, complete all as specified and directed by Engineer-in-charge. Note: tank cleaning and repairing shall be measured separately under respective items of this schedule.
M&L for Cleaning and removing all scale and dirt, etc, from water storage tanks of capacity upto 500 liters and from mouths of circulating pipes, etc complete all as specified and directed by Engineer-in-charge.
Taking down cement plaster / terrazzo of any description thickness including raking out joints hacking for key scrubbing down with water complete all as specified and as directed by Engineer-in-charge.
M&L rendering on concrete/brick surfaces 15mm thick in CM 1:4 using with water proofing compound as per manufactures instruction finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge. (Note:- WPC measured and paid saperately)
Supply only integral water proofing compound, ISI Marked, complete all as specified and as directed by Engineer-in-charge.
Material & Labour for Rendering 5 mm thick cement plaster in CM 1:3 on brick or concrete surface of ceiling finished even and smooth without using extra cement complete including taking down existing plaster complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of newly plastered surfacces and applying two coats of white wash as in ceilling complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of Newly Plastered Surfaces of external Walls and applying Two Coats of Cement Base Paint over a coat of primer complete all as specified and as directed by Engineer-in-charge.
S&F of 15mm bore GI tubing, medium grade, with all fittings to walls and ceiling or laid in floors, including taking down old steel tubing & connection complete all as specified and as directed by Engineer-in-charge.
S&F of 20 mm bore GI tubing, medium grade, with all fittings to walls and ceiling or laid in floors, including taking down old steel tubing & connection complete all as specified and as directed by Engineer-in-charge.
Supply and fixing Rotational Moulded Polyethylene water storage tanks (Cylindrical vertical with closed top) of 500 litres capacity, Triple layered, hoisted and fixed in position all as specified in SSR Part I, including PTMT tank nipple, float valve of 20 mm bore etc, including dismantling existing water tank complete all as specified and directed by Engineer-in-charge.
Supply & Fixing in repair 20 mm bore ball valve high pressure PTMT with epoxy coated aluminium rod & high density polythene float ball and fly nut screwed for iron pipe complete all as specified and directed by Engineer-in-charge.
S&F PVC, waste and vent or rain water pipe 110 mm dia, fixed in ventilation shaft of MAP qtrs, in any length with or without ears with cement joints, laid in trenches or in floor or fixed to walls with clamp, including taking down eaves gutters and rainwater pipe complete all as specified and directed by Engineer-in-charge.
S&F 110 mm dia PVC (SWR ) bends, reducer, socket any radius complete all as specified and directed by Engineer-in-charge.
Taking down chowkhats or frames but exc 1.5 sqm and n. exc 4 Sqm each (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-charge.
Taking down chowkhat with shutter (without taking off shutter) not exc 1.50 Sqm sqm each and removing from site, complete all as specified and directed by Engineer-in-charge.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) all as specified as per Manufacturer's instructions complete all as specified and directed by Engineer-in-charge.
S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant, WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engineer-in-charge.
(Note: stainless steel butt hinges and necessary S.S screws shall be measured and paid separately)
S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-charge.
S&F 300 mm long mild steel sliding door bolt plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed by Engineer-in-charge.
S&F in repair 20 mm dia gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-charge.
S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 of size 100 mm complete all as specified and directed by Engineer-in-charge.
M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregates) as in lintels upto 1.5 clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including use of formwork (straight or curved), including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed by Engineer-in-charge.
M&L for complete removal of existing treatment from the old decorated plastered surfaces of walls and applying two coats of cement base paint over one coat of primer, colour and tint as ordered, complete all as specified and directed by Engineer-in-Charge. Note: Quoted Rates shall be applicable for buildings of height up to 4 Storey. Necessary scaffolding and safety equipment shall be arrenged by the contractor. No claim whatsoever shall be admissible on this account.
Supply & Fixing Powder coated aluminium frames (Thickness of powder coating not less than 50 micron) for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and directed by Engineer-in-charge. Note:- sheet glass, wire cloth, etc shall be measured and paid seperately.
Supply only 3 mm thick sheet glass, ordinary quality, in square n.exc 0.5 Sqm in each panes fixed in any type of frame and glazing with oil putty (or beading) complete all as specified and directed by Engineer-in-charge.
Supply only Stainless steel wire cloth 0.56 mm nominal dia of wire & avg width of aperture 1.18 mm and fixed with tinned tacks complete all as specified and directed by Engineer-in-charge.
M/S Gupta and Sons (BID ID -3068374)
M/S Hari Om Construction (BID ID -3069162)
NARINDER KUMAR SONS (BID ID -3061647)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .