8232 REPAIRS / REPLACEMENT OF PLYWOOD TO CHARPOY GI PIPE AT BSO YARD UNDER GE SOUTH PUNE

Amount

Removing the existing ply wood, tightening all the check nuts, elbows long rails, short rails, and legs to hold the charpoy tight by welding the elbows and legs with two spots on each side and S&F 3 Nos square pipe, 20mmx20mmx1.6mm thick wherever reqd to the frame (long rails) of length not less than 2'-10" each duly welded to the GI pipe at equal distance duly painted with black synthetic enamel paint over a coat red oxide primer including provision of commercial plywood, 12mm thick BWR grade of size 7'x3' fixed with 09 Nos stainless steel nuts & bolts of 6mm dia & 70mm long with two nos of washers of suitable size including 1st class hardwood lipping on all the sides of plywood and french polishing to plywood and lipping complete all as specified as directed. (Note 1 : -Works will be executed where the furniture exists in different User Units at OTM Accn of GE(S) including BSO's Furniture Yard as directed by Engineer-in-charge. Note 2 :- Unserviceable parts like rails, short rails elbows legs, GI check nuts, Square pipes etc if required shall be measured & paid searately as "Supply Only".) (Drg No. FD-220)

Supply only long rail as per drg. FD-220

Supply only short rail as per drg FD-220

Supply only leg as per drg. FD-220

Supply only GI Check nuts as per drg FD-220

Supply only 3way elbow as per drg FD-220

S & F of Square pipes - 20mm x 20mm x 1.6mm thick to the frame (long rail) of length not less than 2'-10" each complete all as specified and as directed. (Drg No FD-220)

M&L for Cutting of long rails retrieved into short rails and threading at both ends as required as per and fixed all as specified & directed. (Drg No. FD-220)

M&L for Cutting of long rails retrieved into legs and threading at the end with MNF clamp suitable for 19mm dia conduit pipe with 3mm thick base plate welded at bottom and fixed all as specified & as directed. (Drg No. FD-220)

M&L for Cutting of short rails retrieved into legs and threading at the end with MNF clamp suitable for 19mm dia conduit pipe with 3mm thick base plate welded at bottom and fixed all as specified & as directed. (Drg No. FD-220)

Madina Traders

M/s Green Leaf Electricals

SHANMUGA TRADERS

KASTURILAL HARICHAND OHRI AND SONS

Mahesh Traders

Amezer