The work involves installing single-arm street lights on both sides of the road from Jalaun Bypass Chowk to the private bus stand.

Supply and buring of 40mm dia X4.5 metres long G.I. Pipe vertically for earthing having 12mm holes spaced 75mm part drilied up to 2 metre from the bottom complete with earthing lead of no. 6 to 8SWG G.I. Wire in G.I. pipe up to apron (and from apron to switch board the cost of G.I. wire and pipe will be extra) up to switch board, 30cm square C.I. box with hinged cover masonry enclosure, funnel at top, alternate layers of charcoal/colke and salt at least 150mm thick around etc. as per directions of engineer in charge complete in all respects as per drawing. (PWD Electrical 2018, 701)

Supply and laying of 16 Sq. mm 4 core aluminium conductor PVC insulated armoured served sheathed Cables 1100 Volts grade at a depth of 750mm below ground level over a cushion of 75mm. Thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size of as directed by the engineer-incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. (PWD Electrical 2018, 501 (I)

Supply and fixing of plain or pin type copper tin plated 16mm cable socket ( Iug ) to the cable leads, insulating with tape and making connection etc. (PWD Electrical 2018, 504 (D)

Supply and fixing of 07 mtr. GI Octagonal pole of approved make (Top dia 70mm, Bottom dia 130mm and base plate 12mm thick) having 3mm thickness with single arm bracket (1 mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and required T&P complete in all respect. (PWD Electrical 2018, 641)

S/F of 2.5 sq. mm. FRISH PVC insulated multistrant single core copper conductor cable in existing. (PWD Electrical 2018, 1301C)

S&F of 6 Amp. To 32 Amp. DP MCB (10KA) C . (PWD Electrical 2018, 1009 Cat-A)

Supply and fixing of LED Street light fitting having die cast aluminium body and diffuser with driver set suitable for 110 to 130 Watt. Confirming to IP 66 and above (CAT-AAA). (PWD Electrical 2018, 1424)

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, Solating switch metering instrument & instrument box with CTs etc. in case of TPN complete in all respect. 40 A TPN. (PWD Electrical 2018, 807 (F) (ii)

Supply and fixing of brass Nickle plated compression gland for 16 sq. mm. PVC insultated & armoured served sheathed, underground cable including rubber ring. (PWD Electrical 2018, 503 (I)

Supply and Laying of 63mm DWC HDPE pipe ISI Marked. (PWD Electrical 2018, 14.15.1)

Please Enable Macros to View BoQ information