REPAIR / REPLACEMENT OF WATER SUPPLY / SANITARY FITTING, FIXTURE, JOINERY, FLOORING AND ROOFS UNDER AGE B/R-II AT ITARANA ALWAR

Amount

Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) exc 1.50 & n.exc. 4 Sqm in each complete all as directed.

Taking down shutters of any descrption n exc 1 Sqm each as directed.

Taking down shutters of any descrption exc 1 Sqm but n.exc 2 Sqm each as directed.

Dismantling of Asbestos Cement (corrugated, semi corrugated etc), sheets in roof coverings including ridges all as per directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as directed.

Demolition of concrete(unrreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debris to location outside defence land complete all as directed.

Taking down cement plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as directed.

Dismantling of stone slab and tiles of any description or thickness in floors or walls, aprons etc tiles laid, beded and pointed in any mortar complete all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Mild steel Framed work using angle Iron ,flat Iron ,round bars as in security doors /gates with end of bars shouldered and or rivetted or forged into spikes ,framed guard bars barred into iron doors ,walkways railing framework amd similler work confiming to Fe 290 ,GDE E-165 all as specified and directed.

M&L 2nd class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, Exc 6 and N exc 13 Sqcm secured with nails or brads complete all as specified and directed.

M&L 18/19mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice laminations including wooden beading, fixed with screws to frame work as in cup board complete all as specified.

S&F Plain, solid, straight 2nd class hard wood frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints.

S&F factory made 35 mm thick plain framed, paneled shutter (Two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces, size of rail and styles as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated using second class Hard Wood rail and styles, fixed to chowkat, complete all as specified and directed.

S&F factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 10mm printed PVC sheet, edges will be painted to match with printed sheet, reinforced with MS square tube & fixing in opening including hold fast Complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of MS Tubes for top and bottom rails, MS frame shall be covered with heat moulded wooden grain printed PVC sheet and 5mm thick X 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mmx10mm used instead of exposed portion of PVC sheet beading Complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting type or friction hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded.including one shop coat of zinc chromate primer compete all as specified as directed

S&F steel windows with side hung shutters including projecting type or friction hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded.including one shop coat of zinc chromate primer compete all as specified as directed

S&F for Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed in repairs with stainless steel wire staples.

S&F in repair for galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed in repairs with tinned tacks, or galvanised wire staples.

S&F Aluminium anosided Hasp and staple, 100mm size safety type with mild steel hinge pin including to bolt to hinge plate and fixed with screws complete all as directed.

S&F aluminium anodised barrel tower bolt of extruded section 200mm long all as directed.

S&F aluminium anodised barrel tower bolt of extruded section 150mm long all as directed.

S&F butt hinges, cold rolled mild steel , 100mm medium weight and fixed all as directed.

S&F butt hinges, cold rolled mild steel , 75mm medium weight and fixed all as directed.

S&F 150 mm extruded aluminium alloy handles , fabricated type, anodised all as directed.

S&F 125 mm extruded aluminium alloy handles , fabricated type, anodised all as directed.

S & F 300mm long mild steel sliding door bolt, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed all as directed.

S & F floor door stoppers of aluminium alloy body & tounge anodised with hard drawn steel spring overall length 140mm fixed complete all as directed.

S&F in repair for Aluminum powder coated (Thickness of powder coating not less than 50 micron) as in Door/Window or ventilators half fixed and half louvers type and small window single leaf cut to size, jointed together with cadmium plated steel screws including rubber packing, aluminium beading or gasket for aluminium sections for fixing glass sheet and necessary fittings complete, screws plugs, handle, tower bolt, stay hocks etc all as specified and directed. Notes :- (i) Weight of aluminium sections shall only be measured. (ii) The supply only rate of glass sheet will be measured seperately.

Supply only Sheet glass 5.5mm thick, ordinary quality and glazing with oil putty/rubber gasket exceeding 0.5Sqm in each pane.

Hacking out old brocken glass (any thickness, size, quality or description) from wooden frame or stone, concrete or brick surrounding, glazed with putty or fixed with beads.

S&F 4.0mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane.

All as per serial item No 36.00 here-in-above but 4.0mm thick figured glass pin headed type

S&F in repairs Drapery curtain rod of metalic 25mm dia covered with PVC coating complete with MS bracket golden colour rings as required at site and side caps fancy type fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified as directed.

M&L for 25 mm thick Cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as in bedding layer of floor finished the surface even and rough complete all as specified and directed.

M&L for coloured Non skid ceramic tiles(Ist quality) 7 to 8mm thick area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm, as in floors etc., laid over and including 15 mm thick screed bed of cement & sand mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

All as per serial item No 40.00 here-in-above but in skirting over and including 10 mm thick plaster in cement mortar 1:6 including necessary cutting of tiles as required size all as specified and as directed.

M&L for coloured Non skid ceramic tiles(Ist quality) 7 to 8mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors etc., laid over and including 15 mm thick screed bed of cement & sand mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L Glazed ceramic coloured tiles(Ist quality) in vertical surface 375x 250x 7-8 mm/450x300 x 7-8 mm thick joint free set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in Cement& Sand Mortar 1:4 complete all as specified and directed.

M&L glazed ceramic tiles (Ist quality) (coloured) 300mm x 200mm x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar 1:4 complete all as specified and as directed.

M&L for Vetrified ceramic tiles(Ist quality) 10 mm thick light shade joint free square of size 600x600 in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade, over and including 15mm thick cement screed bed in cement & sand mortar 1:6 Complete all as specified and as directed.

All as per serial item No 45.00 here-in-above but as in skirting including cutting of tiles as required size over 10mm thick plaster in CM 1:4

Material & labour for rubber moulded concrete colour tiles with grey cement pigment of size 300 mm x 300 m x 22-25 mm thick laid over and including 20 mm thick cement mortar screed in CM 1:6 as in floors complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20 to 25mm thick size not less than 22" x 22" laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 20mm thick cement screed bed in cement mortar 1:6 including rubbing and mirror polishing complete all as specified and as directed.

M&L for kota stone slab 20 to 25mm thick in riser of steps, skirting, dado and pillars laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 10mm thick rendering in cement mortar 1:4 including cutting, moulding outer edges, rubbing and mirror polishing complete all as specified and as directed.

M&L for rubbing and polishing to exiting kota stone flooring including skirting/riser to achive mirror finish all as directed.

M&L for 16-18 mm thick Granite black colour, work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like jointed over and including 15mm thick cement mortar screed (1:4) and pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite, incuding grinding, moulding and polishing to exposed edges complete all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

All as per serial item No 52.00 here-in-above but except brick

M & L brick work with sub class 'B' bricks, straight or curved on plan to any radius, built in cement mortar 1:4 as in half brick thick walls complete all as specified and directed.

M&L rendering 15mm thick,plaster on fair faces of brick work or concrete surfaces in CM 1:4 including finished surfaces even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10mm thick,plaster on other than fair faces of brick work or stone masonry surfaces in CM 1:6 including finished surfaces fair and even complete all as specifed and directed.

M & L 5mm thick rendering in cement mortor 1:3 on concrete surfaces as in ceilings (sunshed, chajja etc) and finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for 50mm thick cement concrete (1:3:6) type C1 using 20 mm thick graded stone aggregate as in plinth protection laid in alternate bays n exc 2.5m length finished even & smooth without using extra cement and joint to be filled with Bituminous mastic filling including necessary form work complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection incl cleaning for refixing or removal to store

S&F galvanised steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors with required size of flat iron (25mmx3mm) clamps complete all as specified and directed.

Supplying and laying of 20mm outter dia (ISI Marked ) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including taking up or down old U/S tubing complete all as specified

Supplying and laying of 20mm outter dia (ISI Marked ) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches including taking up or down old U/S tubing complete all as specified

Taking up or down 20mm bore steel tubing and connection incl cleaning for refixing or removal to store

S&F galvanised steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors with required size of flat iron (25mmx3mm) clamps complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing and making good , cutting not exc 10cm girth complete all as directed.

S&F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm, white with integral foot rest and 'P' or 'S' trap, including provision of Cement concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing surface all as specified and directed.

S&F vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover, mild steel chromium plated hinging device complete but excluding flushing cistern including making good damaged/disturbed surfaces complete as specified and directed.

S&F in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet ball valve, float, handle , PVC Flush Pipe and brackets all as specified and as directed.

S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white including grating and union for discharge pipe (excluding flushing cistern, flush pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, PVC waste pipe, pointing around urinal back in cement complete all as specified & as directed.

S & F in repair vitreous china wash basin white flat back, size 450x300 mm, including brackets cutting for and pinning in ends of brackets or erecting stand including waste fitting, brass chromium plated 32mm size with long screwed shocks and fly nut, flange end bedded in red lead cement and othe end fixed complete all as specified and directed.

S&F in repairs Sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F for Stainless steel plate rack 1mm thick of size 900mm x 900mm x 250mm including fixed with rawl plug and screws on walls

S&F Stainless steel Peg set (Set of 06 each) fixed with chromium plated brass screws and wooden/plastic plug all as directed.

S&F in repairs brass Chromium plated Tubular Towel rail, 20mm dia, D type, 60 cm long between flanges fixed to wall complete all as specified and directed.

M&L for Low density polyethylene (LDPE) pipes (ISI marked) of pressure rating 6 kgf/sqcm of 32mm bore with & including all fittings (ISI marked) and fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

M&L for Low density polyethylene (LDPE) pipes (ISI marked) of pressure rating 6 kgf/sqcm of 40mm bore with & including all fittings (ISI marked) and fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S&F in repairs bib taps bore of pipe in 15mm, cast copper alloy, fancy type, chromium plated, with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered "Hot or Cold" with long screwed shanks and fly nuts, screwed for iron pipe etc complete as specified and directed.

S&F in repairs 15mm bore, stop valve/angle valve, chromium plated, fancy type cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F in reapirs, 15mm bore, stop valve, chromium plated, fancy type, with long shank, and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F in repairs Brass chromium plated shower rose 125mm size fixed to 15mm bore pipe all as directed.

S&F in repairs Brass CP Wall mixer for mixing hot & cold water suitable for 15mm bore dia pipe screwed down for iron pipe and fixed copmplete all as specified and directed.

S & F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as directed.

S & F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as directed.

S&F as in repairs 1000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I

S&F as in repairs 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I

S&F in repairs 20mm bore Ball valves, high pressure, PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron piped and fixed in position all as specified. Make- Prayag or equivalent as approved by GE.

S&F as in repair 20mm bore Gun metal gate valve with iron wheel head, screwed both ends for iron pipe copmplete all as specified and directed.

Disconnecting existing water tanks of any description, of capacity exceeding 250 litre & not exceeding 500 litre, setting aside for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc including writting of cleaning date on water tanks complete all as specified and as directed.

All as per serial item No 90.00 here-in-above but capacity exceeding 500 litre & not exceeding 1000 litre.

S&F in repairs plastic lid cover including locking arrangement for existing 500 Litre capacity rotational moulded polyethylene water storage tanks cylindrical vertical complete all as specified and as directed

Dismantling AC Pipe/ PVC pipes 110mm/ 75 mm dia

S&F 110mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors complete all as directed.

All as per serial item No 94.00 here-in-above but fixed to walls with clamps complete all as directed.

S&F PVC (SWR) bends 110mm dia any radius complete all as directed.

S&F PVC (SWR) junction single(Single T) equal or unequal with access door 110mm dia complete all as directed.

S&F PVC(SWR) Reducers 110mm to 75mm complete all as directed

S&F PVC(SWR) Vent cowl 75mm dia complete all as directed.

S&F 75mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors complete all as directed.

All as per serial item No 100.00 here-in-above but fixed to walls with clamps complete all as directed.

S&F PVC (SWR) bends 75mm dia any radius complete all as directed.

S&F PVC (SWR) junction single(Single T) equal or unequal 75mm dia complete all as directed.

S&F PVC (SWR) 75mm dia Floor Trap, plain with grating including jointing with solvent cement all as directed.

S&F in repairs Grating round 140 mm size of PTMT (Minimum weight 50gms) complete all as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or ‘L’ type or ‘J’ type or cranked hooks bolts complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or ‘L’ type or ‘J’ type or cranked hooks bolts complete all as specified and directed.

S&F 6 mm thick asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc and fixed with ‘L’ type or ‘J’ type or cranked hooks bolts complete all as specified.

All as per serial item No 108.00 here-in-above but except sheets

M&L for 6 mm thick asbestos cement two piece adjustable plain wing ridge for corrugated or semi corrugated sheets fixed with 'L' type or J type or cranked hook bolt.

All as per serial item No 110.00 here-in-abovebut except sheets

S&F as in repair waste coupling of PTMT (half or full threaded) suitable for WHB / Sink complete all as directed.

S&F as in repair flexible waste pipe suitable for WHB / Sink complete all as directed.

M & L two coats of synthetic enamel paint over one coat of pink primer on wood or wooden based surface exc. 10cm width or girth including preparation of new or previously untreated surfaces complete all as specified and directed.

M&L for preparation of new steel surfaces of of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified and directed..

M&L for preparation of newly plaster surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for applying two coats of distemper oil emulsion over a coat of alkali resistant primer over on newly plaster surface of walls complete all as specified and directed.

M&L for three coats of white wash on un-decorated surfaces of ceiling including preparation of surfaces complete all as specified and as directed.

M&L for preparing new plastered surfaces of walls and applying two coats of cement based paint over a coat of primer complete as specified and directed.

S&F mild steel cupboard shutter with frame, Godrej Pattern, made out of 22 guage mild steel sheet including chromium plated MS handle with proper locking arrangement (brass mortice lock, vertical type, size 65mm, 4 Levers with escutcheon plates & two keys) with & including two coats of spray painting with synthetic enamel paint of approved tint over a coat of red oxide primer including fixing with 6 Nos 12mm dia bolt 150 mm long grouted in brick wall/concrete including making good the disturbed surfaces as original complete all as specified and as directed. Note :- The measurement shall be taken of front elevation and not girthwise.

Dismantling wall and celling board (fibre, pulp, insulation etc) any thickness including cover fillets as directed.

M&L for false ceiling with Armgyp-FB ceiling tiles of size 595 x 595mm, 9mm thick (as approved by GE) fixed with and including galvanized iron powder coated inverted ‘Tee’ or ‘L’ section (concealed GI frame work) suspended from ceiling with provision of galvanized wire 4 mm dia and wall taping screw including butterfly clips, hold down clips for fixing the board to frame complete all as per manufacturer’s instructions, complete, all as directed and specified. (a) Size of grid – 600 x 600 mm. (b) Size of main Tee – 38 x 24 x 0.90 mm. (c) Size of cross Tee – 38 x 24 x 0.90 mm. (d) Size of wall angle – 19 x 19 x 0.90 mm.

J.J.ENGINEERING

shiva construction

M/s Laxmi Enterprises

M/S HARI CONSTRUCTION