REPAIR TO FLOORING, PLASTERING, TILING, LEAKAGE, SEEPAGE OVERHEAD TANK, FLOAT VALVE, ROOFING, FALSE CEILING, SANITARY FITTING AND OTHER MISC WORK IN TECHNICAL AREA UNDER GE(AF) SRINAGAR

Amount

Dismantling wall and ceiling boards, fibre pulp insulation etc or insulation boards / slabs / blankets, any thickness, including cover fillets, all as specified.

Dismantling of Plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings including ridges, hips, valleys and flashings etc complete all as specified and as directed by Engineer-in-Charge. Note:- (i) The rate quoted shall also be deemed to include for taking down of wind ties.

S&F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, with L-type or J-type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275 complete.

All as per item No 03 but except Sheets using sheet retrived vide item No 02 above Note For Item No 3 & 4:- Quoted Rates shall be deem to include for Fixing only Wind Tie retrived from BOQ Item No 02

S&F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

M&L for Preparation of new zinc (or galvanised) steel and iron roof surfaces of any description over 10 cm width or girth to receive painting, by coating with mordant solution including washing and cleaning, etc and applying two coat of synthetic enamel paint over one coat red oxide primer complete all as specified and directed by Engineer-in-Charge

M&L for tightening bolts and closing bolt holes etc. in old corrugated steel sheets or Aluminium sheeting by sealing with one bitumen and one curved GI washer on either side and 6 mm G.I. bolts and nuts, all set in stiff white lead, bolt n exc 25 mm in length complete all as specified and directed by Engr-in-Charge.

M&L for Preparation of old zinc (or galvanised) steel and iron roof surfaces of any description over 10 cm width or girth to receive painting, including washing and cleaning, etc and applying one coat of synthetic enamel paint in camouflage pattern complete all as specified .

S&F false ceiling of Non asbestos fibre cement building boards, manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pressure steam using auto claving process confirming to IS-14862, of size 600 mm x 600 mm x 6 mm thick fixed over and including anodised aluminium powder coated (minimum thickness of powder coating 50 micron) snap grid frame work of T section (main & cross member) of size 25 mm x 25 mm x 1.5 mm thick in square pattern of grid size 600mm X 600mm . The aluminium fram work will supported on side wall with the used of aluminium 'L' section of size 25 mm x 25 mm x 1.5 angles etc. Snap grid shall be supported with hangers of 4 mm dia. Galvanised iron wire adjusting level fixed to roof slabs / truss etc by means of ceiling cleats made out of Galvanised iron flat of size 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified directed by the Engineer-in-Charge.

S&F in repair PVC low level flusing cistern kit, complete all as specified and directed by Engineer in Charge.

S&F in repair Single piece commode flusing cistern kit, complete all as specified and directed by Engineer in Charge.

S&F in repair , ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe 15mm bore (Minimum weight 142 gms) complete all as specified and directed by Engineer in Charge.

S&F in repair , ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe 20mm bore (Minimum weight 210 gms) complete all as specified and directed by Engineer in Charge.

S&F in repair , ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe 25mm bore (Minimum weight 455 gms) complete all as specified and directed by Engineer in Charge.

S&F in repair , bib tap standard of PTMT any colour high pressure screwed for iron pipe 15mm bore (Minimum weight 90gms) complete all as specified and directed by Engineer in Charge.

S&F in repair , stop/angle valve of PTMT any colour high pressure screwed for iron pipe 15mm bore (Minimum weight 90gms) complete all as specified and directed by Engineer in Charge.

S&F in repair ,32mm bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed by Engineer in Charge.

S&F in repair PVC waste pipe for 32mm bore pipe complete all as specified and directed by Engineer in Charge.

S&F in repair , PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engineer in Charge.

S&F in repair , PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed by Engineer in Charge.

S&F in repair , CP grating doom 100 mm dia complete all as specified and directed by Engineer in Charge.

S&F in repair , CP grating doom 125 mm dia with waste hole, complete all as specified and directed by Engineer in Charge.

S&F in repair ,Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified, Complete all as specified and directed by Engineer-in-Charge.

S&F in repair, toilet paper holder, brass, chromium plated or stainless steel, fixed to walls with chromium plated brass screws, complete all as specified and as direted by the Engr-in-Charge

S&F in repair, Plastic water closet seat, black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and as direted by the Engr-in-Charge.

S&F in repair , brass face/ spindle for Taps, stop cocks, pillar taps, CP mixer etc, complete all as specified and as direted by the Engr-in-Charge

S&F in repair ,fancy type CP cast copper alloy bib taps screwed down high pressure for 15mm bore pipe, ISI marked complete all as specified and directed by Engineer in Charge.

S&F in repair , CP pillar taps cast copper alloy quarter turn, fancy type CP screwed down high pressure for 15mm bore complete all as specified and directed by Engineer in Charge.

S&F in repair , Stop valve/angle valve Fancy type CP cast copper alloy screwed down high pressure with capstain head for pipe of bore 15mm complete all as specified and directed by Engineer in Charge.

S&F in repair , hot and cold water mixer for Sink/WHB/Bathroom chromium plated quarter turn screwed down for pipe of bore 15mm, including necessary fittings, complete all as specified and directed by Engineer in Charge.

S&F in repair 10 litre capacity PVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle including brackets and PVC flush pipe etc complete all as specified and directed.

S&F in repair vitreous china wash basin white flat back, size 550x400 mm, with & including 32mm dia PVC waste pipe and waste coupling with & including angle iron brackets of suitable size & length or erecting stand etc complete all as specified and directed.

S&F in repair, Vitreous china squating pan, orissa pattern size 580 x 440mm and making good, including connection to trap, and to flushing pipe, anti-syphonage pipe, etc., including trap set in and including concrete, in repair, Complete all as specified and directed by Engineer-in-Charge

S&F in repair, Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern ) including connection to drain (or outgoing pipe) and to flushing pipe , antisyphonage pipe , pvc cover sheet in same colour etc complete all as specified and directed.

S&F in repair, sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm,in repairs, complete all as specified and directed by Engineer in Charge.

Taking up or down steel tubing and connections, 15mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, 20mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.

S&F 15 mm bore tubes, 'medium grade', galvanised, with all fitting; ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified.

S&F 20 mm bore tubes, 'medium grade', galvanised, with all fitting; ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified.

Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 15 mm bore after cleaning including provn of new fittings all as directed by Engineer-in-Charge.

Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 20 mm bore after cleaning including provn of new fittings all as directed by Engineer-in-Charge.

M & L for Lagging to pipes 15mm bore used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh complete including taking down of old lagging if required all as specified and directed by Engineer-in-Charge

M & L for Lagging to pipes 20mm bore used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh complete including taking down of old lagging if required all as specified and directed by Engineer-in-Charge

S&F in repair, Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500ltr capacity hoisted and fixed in position all as specified in SSR Part I., including taking down of exiting tank, complete all as specified and directed by Engineer in Charge.

S&F in repair, Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 ltr capacity hoisted and fixed in position all as specified in SSR Part I, including taking down of exiting tank, complete all as specified and directed by Engineer in Charge.

S&F in repair, Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 2000 ltr capacity hoisted and fixed in position all as specified in SSR Part I, including taking down of exiting tank, complete all as specified and directed by Engineer in Charge.

S&F in repair , CP Tubular towel rail, 20mm dia, 60cm long between flanges including brackets complete all as specified and directed by Engineer in Charge.

S&F in repair , looking mirror of size 600x450mm with PVC moulding complete all as specified and directed by Engineer in Charge.

S&F in repair, Aluminium extruded section body, Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed by the Engineer-in-Charge

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

S&F sheet glass ordinary quality 3mm thick and glazing with oil putty/wooden beading in squares not exceeding 0.50 Sqm including hacking out, complete all as specified and directed by Engineer in Charge.

S&F figured glass, pinheaded type ordinary quality 3mm thick and glazing with oil putty/wooden beading in squares not exceeding 0.50 Sqm including hacking out, complete all as specified and directed by Engineer in Charge.

S&F in repair , 5 mm thick tinted/pin headed figured glass fixed with rubber gasket and aluminium snap beading including hacking out, complete all as specified and directed by Engineer in Charge.

S&F in repair , 18/19mm thick Particle board interior grade, prelaminated one side with decorative choice lamination and other side lamination, fixed with nails or screws, complete all as specified and directed by Engineer-in-Charge.

S&F in repair , 6 mm thick Plywood, grade BWR, type BB, fixed with nails or screws to timber frame work, complete all as specified and as direted by the Engr-in-Charge.

Taking down Shutters and refixing in same opening after easing and adjusting incl all accessories materials of any description n.exc 1 sq. m each including resecuring/changing of builders hardware complete all as specified and directed.

Taking down and refixing of shutters in same opening after easing and adjusting incl all accessories materials of any description exc 1 sq. m and n exc 2 sq. m each including resecuring/changing of builders hardware complete all as specified and directed.

Demolition of floor, hearth or wall tiling incl. cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified.

M & L 15 mm thick screed bed or bedding layer of cement mortar (1:4) complete all as specified and directed

M & L 10mm thick rendering on wall surface in cement mortar 1:4 as in backing coat of wall tiles complete all as specified and directed.

M & L non skid joint free coloured ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed

M & L non skid joint free coloured ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 Sqm, in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed

M & L for Glazed ceramic tiles in vertical surface 600 x 300 x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and directed.

M & L for Glazed ceramic tiles in vertical surface 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and directed.

M&L for double charged colour vitrified ceramic tiles 10 mm thick (square) polished, area of each tiles n.exc 0.36 sqm in floors etc laid over existing screed bed, set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L for double charged colour vitrified ceramic tiles 10 mm thick (square) polished, area of each tiles n.exc 0.36 sqm for skirting / dado etc laid over existing backing coat, set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L for 25 mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in sub base for floor complete all as specified and directed.

M&L for Granite (of any type) tiles 20mm thick machine cut,as in steps, jambs, pillars, windowcills, cooking platforms, wash basin platform and like, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified.

M&L machine cut kota stone slab flooring 20-25 mm thick as in floor, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, laid over and including 20 mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in -Charge.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-charge.

M&L for coloured vitrified ceramic tiles 10 mm thick (square) polished, area of each tiles n.exc 0.36 sqm in floors etc laid over existing screed bed, set and jointed in neat cement slurry and pointed in white or coloured cement to match.

Taking down aluminium glazed door shutters of size exc 1.5 Sqm but n. exc 2.0 Sqm (each leaf), & S&F in repair of hard ware fitting such as stainless steel top & Bottom patch, Pivot, tightening of joint and adjustment of floor door spring and refixing shutters in same positioning for smooth functioning complete. Note:- Floor door spring if found unserviceable same will be replaced & will be measured & paid separately under respective item of this BOQ.

Demolition of stone slabs and tiles of any description or thickness in floors etc laid, bedded and pointed in any mortar, all as specified.

M&L for coloured rubber moulded glossy finish Chequerred cement concrete tiles30cm x 30cm x 25mm thick set and jointed in neat cement slurry with grey cement and pigment in floors complete all as spfd.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc all as specified.(The rate quoted by the contractor shall included for scaffolding and necessary formwork upto triple storey bldg).

M&L for Rendering 15 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified.

M&L for Rendering 15 mm thick on brick masonary wall surfaces in cement mortar 1:4, finished even and smooth without using extra cement including mixing only intergral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified and directed by Engineer-in-Charge.

Supply only liquid water proofing compound of approved manufacturer complete all as specified and directed by Engineer-in-Charge.

M&L for applying 2 mm thick cement base wall care putty in two coats on plastered surface of wall, and making the surafce even & smooth for reciving distemper / paint of any descreption all as specified & directed.

M&L for applying two coats of oil bound distemper over one coat of primer on putty surface of walls all as specified and directed. Note:- Cement base wall care putty where ever directed will be applied and will be measured & paid seperatly

M&L for preparation of newly plastered surfaces of walls including sides and soffits of beams, fascias, parapets etc and applying two coats of cement base paint over one coat of primer, colour and tint as ordered, complete all as specified and directed by Engineer-in-Charge.

Dismantling timber scantlings in unframed work 40 Sqcm and over in section, in any position, all as specified

S&F for pre-painted galvaume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws all as specified.

S&F pre-painted galvaume aluminium zink coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof ridges, fixed with self tapping screws as specified, complete all as specified.

M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre, intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.

M&L for Providing and fixing Gypsum Board 12 mm thick (water proof) in ceiling fixed with screw or as per manufacturers instructions including necessary jointing and taping, and applying two coat oild bound distemper over one coat primer and 1 mm thick cement base putty complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC wall / ceiling panelling consisting of 5 to 8 mm thick hollow type, profile, wall thickness not less than 1 mm, in teak colour, including fixing with solvant cement, and PVC side fixed as per manufacturer instruction complete all as specified & directed. Make:-Royale-Plus a product by German Technology, Decore or equvallent make approve by GE.

M&L in repair wooden panelling of second class softwood 12 mm thick with tongue and groove joint fixed in any position over and including wooden framework in second class softwood with plain fillets square or rectanglular in section clean sawn, secuired with nails / screws of sectional area exc 13 Sqcm and n exc 25 Sqcm at n exc 90cm centre to centre in both direction and including threee coats of french polishing on all the exposed surfaces, complete all as specifed.

M&L for Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S&F rolled mild steel section as in main and cross beams, hip and jack rafters; purlin where connected to common rafters and running rails and guides for for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410-W (Gde-E-250 quality A).

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment using Fe-410-W (Gde-E-250) quality A, complete all as specified .

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but n exc 10 cm long & diametre 16 to 20 mm, all as specified.

M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (any tint) over a coat of red oxide primer, all as specified.

Demolition of cement concrete (unreinforced) in ground floor and in paving n exc 15 cm thickness (below or above ground level), complete all as specified.

M&L for 75 mm thick PCC type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection laid in bays n. exc. 2 sqm each, finishing the surface of concrete topping even & fair, without using extra cement filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand (all by weight) complete all as specified and as directed by Engineer-in-Charge.

S&F 8 mm thick Laminated wooden flooring fixed with dove tailed joints, laid over and including 150 mm micron thick polythene film and 3 mm thick foam cushion as per manufacturer's instructions including taking down existing wooden flooring, all as specified and directed by the Engineer-In-Charge.

Taking down PVC (SWR) pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc, all as specified.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls, with PVC clamp all as specified.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls, with PVC clamp all as specified.

S&F 75 mm size PVC (SWR) bends any radius complete all as specified.

S&F 110 mm size PVC (SWR) bends any radius complete all as specified.

S&F 110 mm size PVC (SWR) branch pipece single with parallel branches complete all as specified.

S&F 75 mm size PVC (SWR) branch pipece single with parallel branches complete all as specified.

S&F 75 mm size PVC (SWR) junction single with parallel branches complete all as specified.

M&L for rectification of leackage from trap (Trap of WC / Floor Trap / Nahani Trap) by cleaning entire internal surface and applying quick setting cement paste mixed with water proofing compound internally all around trap including removing & re-fixing of grating with white cement complete all as specified & directed.

Cleaning of blockage WC of pedestal / squatt pattern upto 1st manhole and making the drian pipe of any size full functional by flushing with water to entire satisfaction of engr in charge including cleaning of 1st manhole and removing the waste material / sludge etc to a distance n. exec 300 m and burying the same in pits and spreading the area with bleaching powder complete all as specified and directed by engr in charge.

Cleaning of blockage from floor trap of bath room & kitchen etc upto 1st manhole including cleaning of gully / trap and removing the waste material / sludge etc to a distance n. exec 300 m and burying the same in pits and spreading the area with bleaching powder complete all as specified and directed by engr in charge.

S&F in repair brass chromium plated Jet Spray of Standard size for EWC alongwith CP connection and all fittings as fixed, complete all as specified and directed by Engineer-in-Charge.

M&L for 75 mm thick cement concrete 1:4:8, type D-2,(using 40 mm graded stone aggregate) as in Sub base for path / flooring complete all as specified and as directed.

M/S FAROOQ AND SONS

M/S LATIF AHMAD MIR

M/S Abdul Ahad Rather

M/S LUCKY BUILDERS

M/S ZAHOOR ENTERPRISES

M/S M.R. Construction

HAJI ZAHOOR HUSSAIN GANIE

M/S BASHIR AND SONS

M/S GHULAM MOHIUDDIN RATHER

M/S GHULAM HASSAN AND SONS

M/S Thakur & Sons