PROVN OF CHAINLINK FENCING FOR BLDG NO P 31 AT MILIT AND PROVN OF CERTAIN REVENUE AND MINOR WORKS AT MILIT GIRINAGAR PUNE 411025

Amount

B/R PORTION Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface as in any type of soil complete all as specified and directed.

Excavation in trenches n exc 1.50m wide and n exc 1.50m in depth and getting out in any type of soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing excavated material to a distance n exc. 50m and depositing where directed at a level n exc.1.5 m above the starting point complete all as specified and directed.

M & L for Removing excavated material to a distance exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundations, filling and mass-concrete complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregates) as in foundation concrete complete all as specified and directed.

S&F MS posts and struts in fencing of angle iron 50x50x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron 40x6mm fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290-0 Gde E 165 complete all as specified and directed.

M&L for mild steel screw bolts 5 to 10 dia of neck in mm(machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

Supply only Chain link MS galvanised fencing any size or type complete all as specified and directed. NOTE:- Dia of wire and the mesh size shall be as decided by EIC. Actual weight of chain link supplied by the contractor shall be measured at site and accordingly paid.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

S & F round bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L preparing new surfaces of steel , any description, over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for brickwork with fly ash bricks, old size, straight or curved on plan to any radius in half brick thick walls built in CM 1:6 complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:6 on fair faces of brick wall surfaces, finishing surfaces even and smooth with out using extra cement complete all as specified and directed.

M&L preparing surfaces of new plastered surfaces and applying three of white wash including preparation of surfaces complete all as specified and directed.

Demolition of Brickwork or stone masonary built in cement mortar inlcuding all quions, arches, pillars etc. but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for Fly ash bricks, straight or curved on plan exc. 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for Rendering 15mm thick on concrete block/ brick or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L for applying two coats of acrylic emulsion paint (lustar paint) internally over a coat of acrylic primer over 2mm thick coat of waterproof putty in two layers on old or new plaster surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for 12 mm thick Acrylic false ceiling of size 600mmx600mm with modern design for bathroom with and including GI powder coated grid work of size 605mm x 605mm complete all as per manufacturer's instructions and directed by Engr-in-Charge. Make:- Armstrong / Saint Gobain or Equivaent in specified makes.

S&F in repair 18mm thick prelaminated particle board interior grade, conforming to IS-12823, Gde-I prelaminated both side with decorative choice lamination as in cupboard shutters, Kitchen cabinets etc fixed with screw including 3mm thick, 1st class HW(TW) beading all around on edging to timber frame work all as specified and directed by Engr-in-Charge.

M&L for 50mm cupboard magnet including high quality magnet and steel plate complete all as specified and directed.

S&F 40mm width of flaps (when open) in mm continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed.

S&F 150mm brass cupboard handles, cast type, polished bright fixed with nut screws and washers complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description exc.1 Sqm but n exc. 2 Sqm each complete all as specified and as directed.

M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified, supplied and fixed size 105X60mm complete all as specified and directed.

M&L for PCC 1:3:6 type C-0 (using 12.5mm graded aggregate) as in filling steel frames etc. incl necessary form work complete all as specified and directed.

M&L for 35mm thick Flush shutters with lipping all around of solid core construction with block board core and ply wood face panels commercial type on both side complete all as specified and directed.

M&L for Preparation of new painted surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

M&L for 0.9mm thick decorative laminate type1 of surface finish, colour and pattern as approved by Engr-in-charge, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F Brass handles, cast type polished bright, of size 200mm complete all as specified and directed.

S&F Brass sliding door bolt with sand of die-cast brass hasp staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed of size 300mm complete all as specified and directed.

S&F Brass barrel tower bolt with cast of sheet barrel and rolled or cast bolt and fixed fo size 200mm long complete all as specified and directed.

M&L for 125mm butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-12 complete all as specified and directed.

S&F for 125mm long brass door stopper fixed to door bottom rail complete all as specified and directed.

S&F Door closer Aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S & F Brass Mortice lock 4 lever, vertical type, size 100 mm incl plates and two keys suitable for all doors complete all as complete all as specified and directed.

Dismantling floor, hearth or wall tiling / chequered tile / interlocking tile including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise complete all as specified and as directed.

M&L for full body colour Marble tiles glossy finish 9-10 mm thick (square/regtangular) polished , stain proof and durable and abrassion resistant with high flexural strength area of each tiles not exc 0.36 sqm in floors etc and joineted neat in cement slurry and pointed in white or colour cement to match with over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for full body colour Marble tiles glossy finish 9-10 mm thick (square/regtangular) polished , stain proof and durable and abrassion resistant with high flexural strength area area of each tiles ( 800 mm X 1600 mm) or not exc 1.28 sqm in skirting/vertical surfaces etc. as per manufactureres specification confirm to IS 13630 and ISO 10545 and joineted neat in cement slurry and pointed in white or colour cement to match with over & including 10mm thick rendering in CM 1:4 complete all as specified and directed.

S&F in repairs Counter top Wash hand basin, vitrous china, coloured flat back of size 470 x 705 x 185 mm including brass waste coupling, CP bottle trap 32mm size with 250mm & 190mm long wall connection pipe & wall flange, 15mm dia fancy type single lever tall boy with 150mm extention body fixed spout without popup waste system with 600mm long braided hoses & base flange complete all as specified and directed. Make :- For WHB (Jaguar Model No. ALS-WHT-85601) & for Single lever tall boy Jaguar Model no-LAG-CHR--91005BWF).

S&F Kohler essential rectangular decorative mirror for wall 560mm X 864 mm matt finish black frame with silver coated glass for bathroom, living room, bedroom premum metal and timeless design all as specified and directed. Make: Kohler.

S&F Vitrious china tank less single piece EWC blind installation,rimless bowl design UF slim soft close seat cover dual flush-3/6 LPF,Antigerm glaze with hinges, fixing accessories set, cistern fittings size 355 X525X380 mm, S trap 300mm complete all as directed by Engr-in-Charge. Make :- Jaguar (Model No.DRS-WHT-37953BIUFSM)

S&F 15mm bore Chromium Plated single lever Wall mixer 3-in 1 system with provision of both hand shower and overhead shower complete with 115 mm mm long bend pipe for mixing hot and cold water screwed down for iron pipe complete all as directed by Engineer in Charge. Make :- Jaguar (Model No. KUP-CHR-35125PM)

S & F Alive maze overhed shower 200X300 mmround edges and rectangular head single flow (body & face plate stainless steel with chrome finish) with rubit cleaning system suitable for 15/20 mm bora GI /CPVCpipe complete all as specified. Make: Jaguar model no:OHS-CHR-85859M

S & F shower arm with wall flange by using quality assured material and advanced techniques complete all as manufacurers specifiacations suitable for 1alive maze overhead showervcomplete all as specified. Make: Jaguar model No:SHA-CHR-477.

S&F 15mm dia bore, two way bib cock with wall flange, screwed down for CPVC/iron Pipe complete all as specified and directed. Make :- Jaguar (Model No. KUP-CHR-35041 PM)

Supply & fixing Kohler Maxstow bath cabinet, size 381 x 610 X 90.4 mm, dark anodised aluminium construction with siver coated glass with durable rust free and chip free finishand 2 adjustable tempered glass shelves,for bathroom,toiletries complete all as specified and directed. Make: Kohlar

S & F continental Swivel glass mirror with chrome finish and luxury look superior built quality product complete all as specified and as directed. Make :Jaguar Model No:CAN-CHR-1195 N

S&F chromium plated angular cock fixed with wall flange for 15mm bore of pipe complete all as specified and as directed. Make :- Jaguar (Model No. KUP-CHR-35053 PM)

S&F stainless steel grating doom 125mm dia complete all as specified & directed.

S&F Chromium Plated Toilet Roll Paper Holder with stainless steel flap complete all as specified and directed. Make - Jaguar (Model No :- CAN -CHR-1153S)

S&F Chromium Plated Toothbrush Holder with stainless steel flap complete all as specified and directed. Make - Jaguar

S&F Chromium Plated Towel shelf 600 mm long complete all as specified and directed. Make - Jaguar (Model No :- CAN-CHR-1181S)

S&F Chromium Plated Tumbler Holder with stainless steel flap complete all as specified and directed. Make - Jaguar (Model No :- CAN -CHR-1141N)

S&F Chromium Plated Towel bar 600mm long complete all as specified and directed. Make - Jaguar (Model No :- CAN-CHR-1111SM)

S&F Chromium Plated Towel ring 155 mm complete all as specified and directed. Make - Jaguar (Model No :- CAN-CHR-1121BN)

S&F Chromium Plated soap dish holder complete all as specified and directed. Make - Jaguar (Model No :- CAN-CHR -1131N)

S&F Chromium Plated soap dispenser with glass bottle complete all as specified and directed. Make - Jaguar (Model No :- ACN -1135N)

S&F sheet glass shelf assembly consisting of 5mm thick sheet glass shelf with chromium plated bracket guard and railing 600mm long complete all as specified and directed. Make - Jaguar (Model :- CAN -CHR-1171N)

S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf corner type three tyres with chromium plated brackets, bracket guard and railing 30cm size incl screws, fixed as in repair complete all as specified and directed. Make - Jaguar (Model :- ACN-CHR- 1173 N)

S&F Hand shower (health faucet) (ABS Chromium plated) with 8mm dia, 1.2mtr long flexible tube and wall hook complete all as specified and as directed. Make :- JaguarALD-CHR-573

S&F Flush valve with slim concealed cistern complete all as specified and directed. Make :- Jaguar.(JCS-WHT-2431,FLV-CHR-1089NSQ,FLV-CHR-1015)

S & F flash touch free infrared hand dryer complete all as specified and directed. Make :- Jaguar.(HDR-SSF-AK2807)

S & F bottle trap with chrome finish complete all as specified and directed. Make :- Jaguar.

Taking down 15mm bore steel water tubing and connections complete all as specified and directed.

Taking down 20mm bore steel water tubing and connections complete all as specified and directed.

S&F Gun metal globe or gate valve with iron wheel head screwed both ends size 20mm for iron pipe, fixed complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 600 mm. complete all as specified and directed.

S&F for 20mm dia CPVC pipes SDR 11 including all Brass CPVC fittings for 20mm bore pipe on walls/ceiling or laying in floors complete all as specified & directed.

S&F for 15/16mm dia CPVC pipes SDR 11 including all Brass CPVC fittings for 16mm bore pipe on walls/ceiling or laying in floors complete all as specified & directed.

M&L for cutting chases, pinning in stone, concrete block walls making good to facings where required and pointing in cement mortar 1:3 to concealed water tubing and making good complete all as directed by Engr-in-Charge.

S&F 1000 ltrs capacity, Rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and in position including ball brass valve 20mm high pressure with polythene float and fly nut complete including dismantling existing water tank and removing to store all as specified and directed.

S&F in PVC (SWR) floor trap, dia of outlet 100 mm, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F floor drain in chrome finish as per manufacturer's specifications and all specified and directed.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall of size 110mm bore complete all as specified and directed.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floor of 75mm bore complete all as specified and directed.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints, joints fixed to wall of 75mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends any radius 75 mm bore with acsses door complete all as specified and directed.

S & F PVC (SWR) vent cowl 110mm Bore complete all as specified and directed.

S & F PVC (SWR) vent cowl 75mm Bore complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets/AC boards, any thickness, including cover fillets Complete all as specified and as directed.

S&F of mineral fibre acoustic suspended ceiling system with prima fine fissured tile with semi concealed grid , the tile should have humidity resistance (RH) of 99% , NRC upto 0.6, light reflectance> 83%, thermal conductivity K= 0.052 to 0.057 w/m, colour white fire performance class O/class 1 (BS476 part6 &7) in module sizeof 600x 600x16 mm with Bio block coating on the face of the tile, impact resistant and suitable for green bldg application, eith recycled content of 63 %. The tile shall be laid on semi concealed grid system with 15 mm white flange incorporating 6 mm central reveal in white/black colour and with web height of 38 mm and load carring capacity of minimum 11.68 kg/sqm.Silhouette. main runner and cross tees to have mitred ends & birdmouth notches to provide mitred cruciform junction. The T sections have galvanising of 120 gms/sqm and passed through 500 hrs of salt test. all as per manufacutrer's instructions and as directed. ( Make : Armstrong, saint Gobain)

M&L 25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in sub base of floor/ levelling course and in similar situation etc complete all as specified and as directed.

M&L for light shade Vitrified ceramic coloured tiles 10 mm thick (square/rectangular) polished ,area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc.and joineted neat in cement slurry and pointed in white or colour cement to match with & over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L machine cut Granite slab 18 to 20 mm thick as in steps, pillars, window cills, parapet tops,and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter 1:2:3mm thick, set and jointed with white cement sturry mixed with pigment to match the shade of slab incl cutting, waste, rubbing and polshing etc complete all as specified & as directed. Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achive the desired granite finish complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as directed.

S&F Providing and fixing Powder coated aluminium section (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete all as specified & directed.

S&F anodised aluminum door shutters, aluminium section weighing 0.55 Kg/ Sqm including necessary jointing cleats, glazing clips, ruber neoprene packing, handles 02 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F floor door stopper 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F three track sliding window with 4mm thick tinted glass in two shutter and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing including good quality bearing, lock, rubber beading and glazing clips etc using following aluminium anodised powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed. Series of aluminium section as per Jindal is (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

M&L for mild steel framed work such as grill, grating etc. with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed.

M& L for Silicon sealant for sealing of existing/new window aluminium frame with penetration depth 10 mm and 10 mm wide using sealant gun finished in triangular shape complete all as specified and as directed.

M&L for 12mm thick clear designed toughened glass fixed to door and window including necessary wooden beadings, nails, screw complete all as specified and directed by EIC.

S&F wall panelling on existing wall surface consisting 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing to be fixed on wall by self tapping screw of size 19mm x 6mm after puttin rawal plugs. The edge and periphery finally to be covered by extruded PVC corner angles beading/fillet complete all as specified and as directed by Engr-in-Charge.

S & F 5 mm thick PVC sheet fillet /beading of width 35 mm for wall panelling inclusive of fixing on wall to make PVC frame as per manufacturer's instructions complete all as specified and as directed.

S&F frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm center to center/ intermediate channel 0.9mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm center to center with GI cleat and steel expansion fasteners with and including ceiling section (not exc. 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lip of 10.5 mm fixed to the intermediate channel at 457 mm center to center complete all as per manufacturer's instructions and as directed by EIC.

M & L 6 mm th. AC plain building board fixed to timber frame work with screws, as in ceiling complete all as specified and directed.

M & L for providing and fixing 10 mm thick plaster of paris ceiling (gypsum unhydrus) to flat suface over 2nd class soft wood fillets or metal frame and reinforced with GI wire mesh complete all as specified and directed by Enge-in-Charge.

M&L precast cement concrete block masonry with solid block, type C-1,1:3:6 mix ( using 20mm graded aggregate ), exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work & concrete, finished even and fair on external wall surfaces complete all as specified & directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc.and joineted neat in cement slurry and pointed in white or colour cement to match with and over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F for Glazed ceramic tiles designed or plane Coloured (350 mm x 250 mm/ 450mm x 350mm x7 mm thick) as approved in wall/dado etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match rendering with and over 10 mm thick rendering in CM 1:6 on stone masonry surfaces or surfaces other than fair face of brick work/ concrete surfaces complete all as specified and directed.

E/M PORTION Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc. complete all as directed by Engineer-in-Charge.

Taking down of old unserviceable sub main wiring of any type including fittings & fixtures & making good the disturbed surfaces of walls, floors, roofs etc to match with the existing finishes complete all as specified and as directed.

Taking down the existing unserviceable main switch / cut out / DBs of any type /metal plug & socket capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes complete all as specified and directed.

M&L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts, FRLS grade with multistranded copper conductor ISI marked drawn through concealed PVC conduit fixed to walls / roofs / floors / ceiling etc. and including provision of PVC conduit, 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly, modular cover plates and c ocealed modular flush boxes, plate for mounting for housing the switches, socket outlets, fan regulators etc, all as specified and as directed :- NOTE:- Cost of cutting chases n exc 10 cm girth & making good the disturbed surfaces to match with existing finishes shall deemed to be included in quoted rate. (a) One light point controlled by one way switch.

(b) One fan/exhaust fan point controlled by one switch and one regulator.

(c) One 3 pin switch socket outlet point 5 Amps on same board with other switch.

(d) One 3 pin switch socket outlet point 5 Amps on Independent board.

All as per item No. 110.00 above but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size complete all as specified and directed.

S & Fix modular switch 1 way 6A, 1 module complete all as specified and directed.

S & Fix modular switch1 way 16A, 1 module complete all as specified and directed.

S & Fix modular socket out let 6A 2/3 on combined 2 module complete all as specified and directed.

S & Fix modular socket out let 6A/16A-2/3 pin combined 2 module complete all as specified and directed.

S & Fix of recess mounted 2' x 2' square LED panel 36 watts (White / Warm White as directed), Ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with Armstrong/Grid ceiling complete all as specified and directed.

Supply & Fixing of recessed mounted LED 15 Watts (white / warm white as directed) Wall washer titled 70° outwards and swivels 350° to offer illumination on walls luminaire complete fitting with all fixing arrangement all as directed.

Supply and Fix wall light fitting gold finish fixture with cognac hammered glass diffuser suitable for 7.5 / 9 W and including LED filament lamp E27 base including with suitable lamp complete all as specified and directed. Make: Havells Model : FLORETINE GLOD FINISH or equivalent in specified makes.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Five star rated with brushless direct current motor (BLDC) and deposit the old fan to the store complete all as specified and directed. Note : The rate shall deemed to be included for extension of down rod of the same colour of fan if required and as directed by EIC.

S & Fix double door sheet metal enclosure distribution board SPN, 8 ways 240 volts, with 200 amps rated bus bar, with IP 43 protection and double door duly flushed in wall and making good with existing wall, suitable for mounting MCBs including taking down old MCB DB complete all as specified and directed.

S & Fix of MCB single pole and neutral, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed.

S & Fix of MCB single pole, 240 volts, 6 to 40 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed.

Supply and fixing Single pole and nuetral enclouser with two pin and earth plug and socket complete with one single pole MCB with 240 V 20 AMPs complete all as specified and directed. Make: Legrand/ABB/Siemens/L&T as approved.

M & L for submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable , multistranded on the surface through and including suitable size of PVC casing and capping / Conduit as required at site with its accessories all as specified and directed by Engr-in -charge for the following :- NOTE:- Cost of cutting chases n exc 10 cm girth & making good the disturbed surfaces to match with existing finishes shall deemed to be included in quoted rate. (a) 2x1.5 sq mm and 1x1.5 sq mm as earth wire

(b) 2x6 sq mm and 1x6 sq mm as earth wire

(b) 2x4 sq mm and 1x4 sq mm as earth wire

S & Fix Ceiling rose surface backlite 65x50mm, 3 terminals complete all as specified and directed.

S&F LED Tube light fitting 10 watt, 230 volts, sleek and seamless profiled extruded aluminium batten with an efficient diffuser to illuminate work and retail spaces complete with all accessories all as specified & directed by Engr-in-Charge.

S&F exhaust fan, AC, single phase, 240 V, 250 mm sweep, PVC body with louvers, including connected with 3 core 1.5 sq mm copper conductor cable from ceiling rose to exhaust fan all as specified and as directed.

Taking down the existing Geyser and after disconnecting electrically & mechanically and examine & carry out the checking / servicing the tank, thermostat, heating element and LED Lamp indicator, testing in all respect for smooth running and refixing complete all as directed.

Supply and fixing of LED Down Light 12 Watts (Warm White / White as directed) recessed type with PC housing & Opal PC diffuser with Independent electronic LED driver including all necessary fixing arrangements all as directed.

Supply and fixing of LED Down Light 12 Watts (Warm White / White as directed) surface moounted type with PC housing & Opal PC diffuser with Independent electronic LED driver including all necessary fixing arrangements all as directed.

Supply and Fix of 2 Watt 4 way wall light LED light including drilling, fixing and installing on the exisiting wall all as specified and directed by Engr-in-Charge.

Supply and fixing of LED COB Light 4 Watts (Warm White / White as directed) recessed type with Independent electronic LED driver including all necessary fixing arrangements complete all as specified and directed.

Supply and fixing of Flexiible LED strips / profile lights (Warm White / White / colour as directed) of 2 Amps capacity with optimum brightness & uniformity of light including all necessary fixing arrangements all as directed by EIC.

Supply and fixing of Driver for Strip Light / profile including all necessary fixing arrangements all as directed by EIC.

S & Fix sheet metal enclosure distribution board SPN DB's 2 way dully flushed in wall and making good with exisiting wall with SPN MCB complete all as specified and directed.

M & L for Cutting holes depth n.exc 60 cm and dia not exc 30 mm into or through cement concrete slabs, chajjas, concrete walls / decorative etc. reinforced suitable for inserting and including 20 / 25 mm PVC conduit and making good surface all as directed by Engr-in-Charge. Note : Any damage to existing decorative tiles / walls shall be make good by the contractor as per existing finishes without any extra cost to the dept.

M/S ANJANI ASSOCIATES

Mehta and Co.