Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.4 LAccepted-AOC | L1 | Accepted-AOC Accept | |
| 2 | L2₹14.0 L+₹2.7 L (24.2%)Rejected-Finance | L2 | Rejected-Finance High Rates | |
| 3 | L3₹16.4 L+₹5.1 L (45.5%)Rejected-Finance | L3 | Rejected-Finance High Rates |
Tender Value
₹16 L
EMD Value
₹32,000
Closing Date
22 Jul 2021, 6:00 pmClosed
GE (MCTE) MHOW
GE (MCTE) MHOW MP 453441
REPAIRS TO ALL TYPES OF WOODEN FURNITURE OF BSO, UNDER GE (MCTE) MHOW
2021_MES_450914_1
GE(MCTE)/MHOW/19(T) OF 2021-22
Open Tender
Civil Works
Works
180 days
GE (MCTE) MHOW
AS PER TENDER DOCUMENT
9 documents required · 9 mandatory
₹500
Yes
GE (MCTE) MHOW
₹32,000
Yes
18 Sept 2021
24 Jun 2021
24 Jul 2021
24 Jun 2021
22 Jul 2021
7 Jul 2021
Amount
BIN SOILED LINEN FD/MAP
(a) Removing the existing unserviceable top and supply & fix new top of18mm pre-laminated paricle board bonded with phenol formaldehyde resin, exterior grade all as specified and shown on drgs.
(b) Removing the existing unserviceable front sides and supply & fix new front side made of 6 mm thick in BWR plywood teak vener finish on one side all as shown on drgs and as directed.
(c) Removing the existing unserviceable back side and S & F new back side made of 6mm commercial plywood all as shwn on drgs and as directed.
(d) Removing the existing unserviceable hinges and supply & fix new 75mm long butt hinges of stainless steel all as shwn on drgs and as directed.
(e) Removing the existing unserviceable/broken leg frame with legs and supply & fix new leg frame with legs all as shown & specified on drgs and as directed.
NOTE : Unit rate quoted for all the above items shall be deemed to include for connected minor repairs wherever necessary and polishing of Bin Soiled Linen.
TABLE DRESSING GENTS WITH MIRROR
(a) Removing unserviceable of complete drawers and supply & fix new complete drawers made out of 12 mm thick teak wood plank (left & right) and 6 mm thick ply at bottom and back and 18mm pre-laminated particle board at front side and fitted knob with screw as per existing size and pattern complete all as specified, shown on drawing and as directed.
(b) Removing unserviceable mirror with frame and Supply and fixing in replacement 5.5mm thick looking mirror Make - Modi Guard with frame as per existing size and pattern complete all as specified, shown on drawing and as directed.
(c) Removing the existing unserviceable top of 12mm pre-laminated particle board bonded with phenol formaldehyde resin, exterior grade and supply & fix new top of 12mm pre-laminated particle board bonded with phenol formaldehyde resin, exterior grade all as specified and shown on drgs and as directed..
(d) Removing the existing unserviceable//broken Left /Right side & partition of 12mm pre-laminated particle board bonded with phenol formaldehyde resin, exterior grade and S & F new left/right side & partitions of 12 mm thick pre-laminated particle board bonded with phenol formaldehyde resin, exterior grade for locker all as specified and shown on drawings and as directed.
(e) Removing the existing unserviceable back of 12mm ply wood commercial and supply & fix new back of 12mm ply wood commercial all as specified and shown on drgs and as directed..
TABLE CENTER FD
(a) Removing unserviceable top and supply and fixing new of top 18mm thick pre-laminated particle board bonded with phenol formaldehyde resin, exterior grade of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all round and as directed.
(b) Removing unserviceable leg and supply and fixing new of leg made out of Ist class hard wood MP teak of existing size and shape including polishing with Hi-gloss French polish including preparation of surface to match with the existing complete all as specified, shown on drawing and as directed.
(c) Removing unserviceable top side rail and supply and fixing new top side rail as per existing pattern, all as per drawing and as directed.
(d) Removing unserviceable top long rail and supply and fixing new top long rail as per existing pattern, all as per drawing and as directed.
TABLE DRESSING LADIES
(a) Removing unserviceable top and supply and fixing new top 18mm thick pre-laminated particle board bonded with phenol formaldehyde resin, exterior grade of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all round and as directed.
(b) Removing unserviceable drawer and supply and fixing new drawer made out of 12 mm thick teak wood plank and 6mm thick ply at bottom and back as per existing size and pattern complete all as specified, shown on drawing and as directed.
(c) Removing unserviceable 5.5mm thick looking mirror and supply and fixing new 5.5mm thick looking mirror Make - Modi Guard as per existing size and pattern complete all as specified, shown on drawing and as directed.
(d) Removing unserviceable channel aluminum alongwith plane glass 4mm thick and supply and fixing new of channel aluminum alongwith plane glass 4mm thick as per existing size and pattern complete all as specifed, shown on drawing and as directed.
PEG TABLE
(a) Removing unserviceable top and supply and fixing new top 18mm thick pre-laminated particle board bonded with phenol formaldehyde resin, exterior grade of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all round and as directed.
(b) Removing unserviceable leg and supply and fixing new leg made out of Ist class hard wood MP teak of existing size and shape including polishing with Hi-gloss French polish including preparation of surface to match with the existing complete all as specified, shown on
(c) Removing unserviceable top side rail and supply and fixing new top side rail as per existing pattern, all as per drawing and as directed.
TABLE DINNING 6 PERSONS
(a) Removing unserviceable legs and supply and fixing new legs of first class hard wood (MP teak) including polishing to match with the existing of size as shown on drawing and as directed.
(b) Removing unserviceable top and supply & fixing new top 18 mm thick pre-laminated particle board bonded with phenol formaldehyde resin, exterior grade of size as shown on drawing, one side with shade as approved and balancing white with 4 mm thick teak wood edging all round and as directed.
(c) Removing unserviceable top long rail and supply & fixing new top long rail of first class hard wood (MP teak) including polishing to match with the existing of size as shown on drawing and as directed
(d) Removing unserviceable top side rail and supply and fixing new top side rail as per existing pattern, all as per drawing and as directed.
TABLE DINNING 8 PERSONS
(a) Removing unserviceable legs and supply and fixing new legs of first class hard wood (MP teak) including polishing to match with the existing of size as shown on drawing and as directed.
(b) Removing unserviceable short rail and supply & fixing new short rail of first class hard wood (MP teak) including polishing to match with the existing of size as shown on drawing and as directed
(c) Removing unserviceable top and supply & fixing new top 18 mm thick pre-laminated particle board bonded with phenol formaldehyde resin, exterior grade of size as shown on drawing, one side with shade as approved and balancing white with 4 mm thick teak wood edging all
(d) Removing unserviceable top long rail and supply & fixing new top long rail of first class hard wood (MP teak) including polishing to match with the existing of size as shown on drawing and as directed
TEAPOY
(a) Removing unserviceable top and supply and fixing new top 18mm thick pre-laminated particle board bonded with phenol formaldehyde resin, exterior grade of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all round and as directed.
(b) Removing unserviceable leg and supply and fixing new leg made out of Ist class hard wood MP teak of existing size and shape including polishing with Hi-gloss French polish including preparation of surface to match with the existing complete all as specified, shown on drawing and as directed.
(c) Removing unserviceable bottom rail and supply and fixing new bottom rail as per existing pattern, all as per drawing and as directed.
(d) Removing unserviceable top side rail and supply and fixing new top side rail made out of Ist class hard wood MP teak of existing size and shape including polishing with Hi-gloss French polish including preparation of surface to match with the existing complete all as specified, shown on drawing and as directed.
CHAIR DINNING LONG BACK
(a) Removing unserviceable side rail and supply and fixing new side rail of seat frame made out of Ist class hard wood MP teak of existing size and shape complete all as specified, shown on drawing and as directed.
(b) Removing unserviceable supporting batten and supply and fixing new supporting batten of Ist class hard wood MP teak of existing size and shape complete all as specified, shown on drawing and as directed.
(c) Removing unserviceable long supporter batten and supply and fixing new long supporter batten of Ist class hard wood MP teak of existing size and shape complete all as specified, shown on drawing and as directed.
(d) Removing unserviceable seat and supply and fixing new seat made out of 6 mm thick plywood, 50 mm thick cushion 32 density covered with leatherized rexine of approved colour and pattern complete all as specified, shown on drawing and as directed.
(e) Removing unserviceable back and supply and fixing new back made out of 6mm thick plywood ,50mm thick cushion 32 density covered with leatherized rexine of approved colour and pattern complete all as specified, shown on drawing and as directed.
(f) Removing unserviceable front leg and supply and fixing new front leg made out of Ist class hard wood MP teak of existing size and shape complete all as specified, shown on drawing and as directed.
SIDE BOARD
(a) Removing the existing unserviceable top and supply & fix with new top made of 18mm thick pre-laminated particle board bonded with phenol formaldehyde resin, exterior grade all as shown on drgs and as directed.
(b) Removing the existing unserviceable/broken sides and supply & fix new side made of 18mm thick pre-laminated particle board bonded with phenol formaldehyde resin, exterior grade. NOTE : Each side will be measured as one unit.
(c) Removing the existing unserviceable/broken shutter and supply & fix with new shutter made of 18mm thick pre-laminated particle board bonded with phenol formaldehyde resin, exterior grade duly providing 6mm thick TW edging alround including brass ball spring Catch as shown on drgs and as directed. NOTE : Each shutter
(d) Removing the existing unserviceable/wooden drawer and supply & fix new drawers all as per drgs and as directed.. NOTE : Each drawer will be measured as one unit.
(e) Removing the existing unserviceable/broken back and supply and fix new back made of 6mm thick commercial plywood as shown in drg and as directed.
(f) Removing the existing unserviceable hinge and supply & fix new metal coated black continuous piano type hinge upto full height/hydrauolic hinges of shutter all as specifed and shown on drgs and as directed.
NOTE : Each hinges will be measured as one unit.
(g) Removing the existing unserviceable leg frame and supply & fix with new leg frame made of 1st class teak wood all as shown in drg and as directed.
NOTE : Unit rate quoted for all the above items shall be deemed to include for connected minor repairs wherever necessary and polishing of Side Board.
TABLE WRITING
(a) Removing unserviceable left hand side leg and supply & fixing new left hand side legs of first class hard wood (MP teak) including polishing to match with the existing of size as shown on drawing and as directed. NOTE : Each legs will be measured as one unit.
(b) Removing unserviceable stiffener and supply and fixing new stiffener of firs class hard wood (MP teak) including polishing to match with the existing of size as shown on drawing and as directed.
(c) Removing unserviceable drawer and supply & fixing new drawer made out of 12 mm thick teak wood plank at side and 6 mm ply at bottom and back side as per existing size and pattern complete all as per drawing.
(d) Removing unserviceable top and supply & foxing new top 18 mm thick pre-laminated particle board bonded with phenol formaldehyde resin, exterior grade of size as shown on drawing, one side with shade as approved and balancing white with 4 mm thick teak wood edging all
(e) All as per item No. 7(c) but side rail for table writing.
CHAIR WRITING FD
(a) Removing unserviceable front leg and supply & fixing new front legs of Ist class hard wood MP teak including polishing with Hi-gloss French polish including preparation of surface to match with the existing of size as shown on drawing complete all as specified and as directed.
(b) Removing unserviceable rear leg and supply & fixing new rear legs of Ist class hard wood MP teak including polishing with Hi-gloss French polish including preparation of surface to match with the existing of size as shown on drawing complete all as specified and as directed.
(c) Removing unserviceable side rail and supply & fixing new side rail of Ist class hard wood MP teak including polishing with Hi-gloss French polish including preparation of surface to match with the existing of size as shown on drawing complete all as specified and as directed.
(d) Removing unserviceable front / rear rail and supply & fixing new front / rear rail of Ist class hard wood MP teak including polishing with Hi-gloss French polish including preparation of surface to match with the existing of size as shown on drawing complete all as specified and as directed.
(e) Removing unserviceable stiffener and supply & fixing new stiffener of Ist class hard wood MP teak including polishing with Hi-gloss French polish including preparation of surface to match with the existing of size as shown on drawing complete all as specified and as directed.
(f) Removing unserviceable arm rest and supply & fixing new arm rest of Ist class hard wood MP teak including polishing with Hi-gloss French polish including preparation of surface to match with the existing of size as shown on drawing complete all as specified and as directed.
CHAIR EASY FD
(a) Removing unserviceable front leg and supply & fixing new front legs of Ist class hard wood MP teak including polishing with Hi-gloss French polish including preparation of surface to match with the existing of size as shown on drawing complete all as specified and as directed.
(b) Removing unserviceable rear leg and supply & fixing new rear legs of Ist class hard wood MP teak including polishing with Hi-gloss French polish including preparation of surface to match with the existing of size as shown on drawing complete all as specified and as directed.
(c) Removing unserviceable side rail and supply & fixing new side rail of Ist class hard wood MP teak including polishing with Hi-gloss French polish including preparation of surface to match with the existing of size as shown on drawing complete all as specified and as directed.
(d) Removing unserviceable front rail and supply & fixing new front rail of Ist class hard wood MP teak including polishing with Hi-gloss French polish including preparation of surface to match with the existing of size as shown on drawing complete all as specified and as directed.
(e) Removing unserviceable rear rail and supply & fixing new rear rail of Ist class hard wood MP teak including polishing with Hi-gloss French polish including preparation of surface to match with the existing of size as shown on drawing complete all as specified and as directed.
(f) Removing unserviceable arm rest and supply & fixing new arm rest of Ist class hard wood MP teak including polishing with Hi-gloss French polish including preparation of surface to match with the existing of size as shown on drawing complete all as specified and as directed.
(g) Removing the existing unserviceable/broken seat frame side rail and S & F new teak wood seat frame side rail including drilling holes @ 12.5 mm c/c complete and as directed and shown on drawings and as directed.
(h) Removing the existing unserviceable/broken back frame side rail and S & F new teak wood back frame side rail including drilling holes @ 12.5 mm c/c complete and as directed and shown on drawings and as directed.
CHAIR DINNING FD
(a) Removing unserviceablefront leg and supply & fixing new front legs of existing size and shape / pattern as shown on drawing of Ist class hard wood MP teak including polishing with Hi-gloss French polish including preparation of surface to match with the existing complete all as specified and as directed by Engineer-in- Charge.
(b) Removing unserviceable rear leg and supply & fixing new rear legs of existing size and shape/ pattern as shown on drawing of Ist class hard wood MP teak including polishing with Hi-gloss French polish including preparation of surface to match with the existing complete all as specified and as directed by Engineer-in- Charge.
(c) Removing unserviceable side/front/rear rail and supply & fixing new side/front/rear rail of existing size and shape Ist class hard wood MP teak including polishing with Hi-gloss French polish including preparation of surface to match with the existing complete all as specified, shown on drawing ad as and as directed by Engineer-in- Charge.
(d) Removing unserviceable back and supply & fixing new back verticle strips as per existing size & shape of Ist class teak wood MP teak including polishing with Hi-gloss French polish including preparation of surface to match with the existing complete all as specified, as shown on drawing and as directed by Engineer-in- Charge.
(e) Removing unserviceable side sttiffener and supply & fixing new side stiffener of existing size and shape of Ist class hard wood MP teak including polishing with Hi-gloss French polish including preparation of surface to match with the existing complete all as specified, as shown in drawing and as directed by Engineer-in- Charge.
(f) Removing unserviceable stiffiner and supply & fixing new centre stiffener of existing size and shape of Ist class hard wood MP teak including polishing with Hi-gloss French polish including preparation of surface to match with the existing complete all as specified, as shown on drawing and as directed by Engineer-in- Charge.
(g) Removing unserviceable back rest and supply & fixing new back rest of of existing size and shape of Ist class hard wood MP teak including polishing with Hi-gloss French polish including preparation of surface to match with the existing complete all as specified, as shown in drawing and as directed by Engineer-in- Charge.
TABLE BED SIDE MAP
(a) Removing the existing unserviceable top and supply & fix with new top made of 12mm thick pre-laminated particle board all as shown on drgs and as directed.
(b) Removing unserviceable channel, supply & fix new channel for upper and lower drawer. leg frame made of 1st class teak wood all as shown in drawing and as directed.
(c) Removing unserviceable knobs/supply, supply & fix new knobs channel for upper and lower drawer. leg frame made of 1st class teak wood all as shown in drawing and as directed.
(d) Removing the existing unserviceable/broken sides and supply & fix new sides made of 12mm thick pre-laminated particle board all as shown in drawing and as directed. . NOTE : Each side will be measured as one unit.
(e) Removing the existing unserviceable/broken back and supply and fix new back made of 6mm thick commercial plywood as shown in drg and as directed. .
TABLE 3' X 2' WITHOUT DRAWER
(a) Removing unserviceable top and supply and fixing new of top 18mm thick pre-laminated particle board bonded with phenol formaldehyde resin, exterior grade of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all round and as directed.
(b) Removing unserviceable leg and supply and fixing new leg made out of Ist class hard wood MP teak of existing size and shape including polishing with Hi-gloss French polish including preparation of surface to match with the existing complete all as specified, shown on drawing and as directed.
(c) Removing unserviceable stiffner and supply and fixing new stiffner second class hard wood all as specifed, shown on drawing and as directed.
(d) Removing unserviceable Supply & fixing in replacement of top side rail of Ist class hard wood MP teak of existing size and shape including polishing with Hi-gloss French polish including preparation of surface to match with the existing complete all as specified, shown on drawing and as directed.
STOOL DRESSING FD
(a) Removing unserviceable leg Supply and fixing in replacement of leg made out of Ist class hard wood MP teak of existing size and shape including polishing with Hi-gloss French polish including preparation of surface to match with the existing complete all as specified, shown on drawing and as directed.
(b) Removing unserviceable/broken seat frame side rail and S & F new teak wood seat frame side rail including drilling holes @ 12.5 mm c/c complete and as directed and shown on drawings and as directed.
(c) Removing the existing unserviceable/broken stiffner and S & F new teak wood stiffner complete all as directed and shown on drawings and as directed. (Each stiffner shall be measured as single unit)
CHAIR DINNING MAP
(a) Removing unserviceablefront leg and supply & fixing new front legs of existing size and shape / pattern as shown on drawing of Ist class hard wood MP teak including polishing with Hi-gloss French polish including preparation of surface to match with the existing complete all as specified and as directed by Engineer-in- Charge.
(b) Removing unserviceable rear leg and supply & fixing new rear legs of existing size and shape/ pattern as shown on drawing of Ist class hard wood MP teak including polishing with Hi-gloss French polish including preparation of surface to match with the existing complete all as specified and as directed by Engineer-in- Charge.
(c) Removing unserviceable side/front/rear rail and supply & fixing new side/front/rear rail of existing size and shape Ist class hard wood MP teak including polishing with Hi-gloss French polish including preparation of surface to match with the existing complete all as specified, shown on drawing ad as and as directed by Engineer-in- Charge.
(d) Removing unserviceable back and supply & fixing new back verticle strips as per existing size & shape of Ist class teak wood MP teak including polishing with Hi-gloss French polish including preparation of surface to match with the existing complete all as specified, as shown on drawing and as directed by Engineer-in- Charge.
(e) Removing unserviceable side sttiffener and supply & fixing new side stiffener of existing size and shape of Ist class hard wood MP teak including polishing with Hi-gloss French polish including preparation of surface to match with the existing complete all as specified, as shown in drawing and as directed by Engineer-in- Charge.
(f) Removing unserviceable stiffiner and supply & fixing new centre stiffener of existing size and shape of Ist class hard wood MP teak including polishing with Hi-gloss French polish including preparation of surface to match with the existing complete all as specified, as shown on drawing and as directed by Engineer-in- Charge.
(g) Removing unserviceable back rest and supply & fixing new back rest of of existing size and shape of Ist class hard wood MP teak including polishing with Hi-gloss French polish including preparation of surface to match with the existing complete all as specified, as shown in drawing and as directed by Engineer-in- Charge.
(h) Removing unserviceable seat and supply & fixing new Seat made of 75 mm thick, 40 denisity foam with fabricated leathorised rexine on 12 mm thick commircial ply as shown on drawing complete all as specified and as directed by Engineer-in- Charge.
Table 3'x2' with drawer
(a) Removing unserviceable top and supply and fixing new top 18mm thick pre-laminated particle board bonded with phenol formaldehyde resin, exterior grade of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all round all as per drawing and as directed .
(b) Removing unserviceable leg and supply and fixing new leg made out of Ist class hard wood MP teak of existing size and shape including polishing with Hi-gloss French polish including preparation of surface to match with the existing complete all as specified, shown on drawings and as directed.
(c) Removing unserviceable complete drawer and supply & fixing new complete drawer with knob made out of 12 mm thick teak wood plank at side and 6 mm ply at bottom and back side as per existing size and pattern complete all as per drawing and as directed.
(d) Removing unserviceable knobs/supply, supply & fix new knobs channel for upper and lower drawer. leg frame made of 1st class teak wood all as shown in drawing and as directed.
(e) Removing unserviceable stiffner and supply and fixing new stiffner first class hard wood all as specifed, shown on drawing and as directed.
Hat satnd with mirror
(a) Removing unserviceable mirror (300mmx440mm) thick 5.00mm and supply & fixing new mirror (300mmx440mm) thick 5.00mm of existing size and shape / pattern as shown on drawing including 1st class teak wood beading with Hi-gloss French polish including preparation of surface to match with the existing complete all as specified and as directed by Engineer-in- Charge.
(b) Removing unserviceable stainless steel pegs size of 120mmx75mm with screw and supply & fixing new stainless steel pegs size of 120mmx75mm with screw and shape/ pattern as shown on drawing preparation of surface to match with the existing complete all as specified and as directed by Engineer-in- Charge.
(c) Removing the existing unserviceable of 18mm thick pre-laminated particle board of size 1000mmx710mm edging alround 1st class teak wood beading all as shown as per drawing.
TABLE DRESSING GENTS WITH MIRROR MAP
(a) Removing the existing unserviceable mirror and supply & fix new mirror of 5.5mm make- Ajanta/Modi guard/Atul all as specified and shown on drgs and as directed.
(b) Removing the existing unserviceable left sides and supply & fix new left side made of 18mm pre-laminated particle board bonded with phenol formaldehyde resin, exterior grade as shown on drgs and as directed.
(c) Removing the existing unserviceable back side and S & F new back side made of 6mm commercial plywood all as shwn on drgs and as directed.
(d) Removing the existing unserviceable hinges and supply & fix new 75mm long butt hinges of stainless steel all as shwn on drgs and as directed.
(e) Removing the existing unserviceable glass shelf and supply & fix new glass shelf of 5.5mm make Ajanta/Modi guard/Atul all as shwn on drgs and as directed.
(f) Removing the existing unserviceable/broken complete meginet catcher set and supply & fix new complete meginet catcher set all as shown & specified on drgs and as directed.
NOTE : Unit rate quoted for all the above items shall be deemed to include for connected minor repairs wherever necessary and polishing of table dressing gents with mirror.
M & L for preparation of existing old polished wooden exposed surface by scrapping, cleaning dust, filling holes with creamy Paste of Plaster of Paris and water and smoothen dry surface by rubbing with sand paper & finally applying one or more coat of Shellac French polish confirming to relavent IS to achieve glossy finish complete all as specified and directed for the following wooden furniture items.
(a) Bin solied linon large and small
(b) Board notice 3'x2'
(c) Book case small
(d) Book shelf open Large/small
(e) Board Notice off sizes
(f) Chair Dining Long back
(g) Chair dining/Chair CBB without arms
(h) Chair writing chair CBA with arms
(j) Chair easy fd
(k) Chair easy cushion
(l) Chair Dining MAP
(m) Hat stand with mirror
(n) Table med spl with one side locker
(o) Table pentry
(p) Table large spl with locker
(q) Table House M/Top
(r) Side Board
(s) Stool dressing CB
(t) Sofa sets 5 seater
(u) Sofa sets 4 seater
(v) Table dining 6/8 person
(w) Table writing/Table writing Medium
(x) Table Dressing Gents with mirror FD
(y) Table dressing Ladies with Mirror
(z) Table Centre
(aa) Teapoy
(ab) Table 3’x2’ with / W/O Drawer
(ac) Table Office officers wooden
(ad) Table office Clk
(ae) Table 3’x3’
(af) Table peg
(ag) Table with pre-laminated particle board 18mm thick 900x600x760mm
(ah) Table Cord 900x900x760mm
M/S JAI BALAJI TRADERS
Budget Furniture Industries
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .