GE(S) BTD TOKEN NO 82 OF 2023-24 REPAIR REPLACEMENT OF INTERNAL UNSERVICABLE POINT WIRING REWIRING FITTING FIXTURES DBS SUB MAIN WIRING SWITCHES AND CONNECTED ACCESSORIES WORK IN BASNAT BAGH AND BANA SINGH ENCLAVE AND MH UNDER AGE EM IV UNDER GARRIS

Amount

Taking down carefully existing copper/Aluminum point wiring (light,fan, socket or power) complete including fixture and fittings such as switches, bellpushes, ceiling roses, pendents, regulators, sockets, light fitting, callbells etc removiing materials to store for keeping in safe custody or for taking credit(credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. to match existing complete allas specified and directed

Dismentaling & taking down of existing unsv light fittings/fixtures complete all as specified & directed

Dismentaling & taking down of existing unsv call bell for replacement complete all as specified & directed

Dismentaling & taking down of existing unsv batten/angle holder for replacement complete all as specified & directed

Dismentaling & taking down of existing unsv switch 5 Amp for replacement complete all as specified & directed

Dismentaling & taking down of existing unsv two way switch 5 Amp complete all as specified & directed

Dismentaling & taking down of existing unsv switch 15 Amp complete all as specified & directed

Dismentaling & taking down of existing unsv bell push 5/6 Amps complete all as specified & directed

Dismentaling & taking down of existing unsv socket 5A complete all as specified & directed

Dismentaling & taking down of existing unsv socket outlet 15 Amp complete all as specified & directed

Dismentaling & taking down of existing unsv switch socket combination 5/15 Amp complete all as specified & directed

Dismentaling & taking down of existing unsv stepped type fan regulator for complete all as specified & directed

M & L for Point wiring with multi-stranded copper conductor, single core, PVC insulated and unsheathed cable, including PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor to common earth and connected to earth dolly, GI terminal boxes, modular frame & cover plate (suitable for modular switch/sockets) comprising the following: -

One light point controlled by one switch or one fan point controlled by one switch & fan regulator etc. with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in existing concealed conduit all as specified.

One Socket outlet three pin, 6 Amp, on the same board, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, all as specified.

One Socket outlet three pin, 6 Amp, independent, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in existing concealed conduit all as specified.

One Bell/Buzzer point controlled by one push button with 1.5 Sq. mm (nominal area) cable & 1.5 Sq. mm (nominal area) cable as earth continuity conductor, in existing concealed conduit all as specified.

One light point controlled by two two way switch. with 1.5 Sq. mm (nominal area) cable & 1.5 Sq. mm (nominal area) cable as earth continuity conductor, in existing concealed conduit all as specified.

One socket outlet three pin, 5/15 Amp, independent, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in existing concealed conduit all as specified.

Note for serial item No 13.00 to 13.06: 1. Switch(es) & socket(s) shall be measured & paid for separately under respective item of Schedule 'A'. 2. GI boxes shall be fixed flush in position with cement mortar (1:4) complete all as directed.

S&F Switch modular type single pole, one way, 6 Amp, one module, complete all as specified.

S&F Switch modular type single pole one way, 16 Amp, one module, complete all as specified.

S&F Switch modular type single pole, two way, 6 Amp, one module, complete all as specified.

S&F Bell push switch modular type single pole one way, 6 Amp, one module, complete all as specified.

S&F Socket outlet modular type, multipurpose, 3 pin, single pole one way, 6 Amp, two module, shutter type complete all as specified.

S&F Socket outlet modular type multipurpose 3 pin, 2 in 1 single pole one way 6/16 Amp, two module, shutter type complete all as specified.

S&F in repair Modular telephone socket one module complete.

S&F Fan regulator, modular type, 5 step, high speed, two module complete all as specified.

S&F Switch piano, flush type single pole, one way 5 Amp complete all as specified

S&F Switch piano, flush type single pole, two way 5 Amp complete all as specified

S&F Switch piano, flush type single pole, one way 15 Amp complete all as specified

S&F Bell push 5/6 Amps 230 V AC complete all as specified

S&F Socket outlet 3 pin, 5A, flush type all as specified

S&F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 Amp flush type complete all as specified

S&F Stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified

S&F Ceiling rose, 3 terminal PVC/polycarbonate, suitable for 230 V, AC, 50 Hz supply.

S&F call bell ding dong type AC 230 V complete.

S&F wall mounted extruded Aluminium/polycarbonate integrated LED batten fixture with tube 1.2 m, 20watt, 1.2 m 3000/6500K,efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor and integrated inbuilt driver complete complete including making connection complete all as specified and directed.

S&F decorative wall light fixture made of polycarbonate suitable for retrofit 9W LED lamp(base B-22) complete with PC diffusor & including one 9W LED lamp(base B-22), 3000/6500K, not less than 90 lumen/watt efficacy including making connection complete all as specified and directed.

S&F integrated round shape 6 watt 220V AC surface type 3000/6500K,efficacy not less than 90 lumen/watt with high efficiency PMMA diffusor soft glare free light complete and integrated inbuilt driver, holders, LED lamps etc including making connection complete all specified and directed

S&F LED light fitting 9/10W bulkhead luminaires incluing LED light, driver, holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

S&F Lamp holder PVC/polycarbonate type with back plate complete all as specified

S&F LED 7W lamp(base B-22) 3000/6500K not less than 90 lumen/watt efficacy complete all as specified and directed.

S&F post top lantern LED type 20 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistance complete with driver and lamp complete all as specified and directed

S&F LED downlighter/spot light fitting, recessed mounted, round shaped of ceiling cut outφ90mm, 03watts efficacy not less than 90 lumen/watt, 3000/6500K extruded Aluminium/polycarbonate, PC diffusor, module and inbuilt driver complete including making connection complete all as specified and directed.

S&F LED downlighter/spot light fitting, recessed mounted, round shaped of ceiling cut outφ160mm, 12watts efficacy not less than 90 lumen/watt, 3000/6500K extruded Aluminium/polycarbonate, PC diffusor, module and inbuilt driver complete including making connection complete all as specified and directed.

S&F LED panel light fitting, recessed mounted, square shaped of size 595x595x65 sqmm, 36(±10%)watts efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor, module and inbuilt driver complete including making connection complete all as specified and directed.

S&F LED panel light fitting, recessed mounted, square shaped of size 595x295x70 sqmm, 28(±10%)watts efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor, module and inbuilt driver complete including making connection complete all as specified and directed.

S&F LED landscape/bollard light fitting, round shaped of 0.6m pole size, 10watts, efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, IP65, PC diffusor, module and inbuilt driver complete including making connection & fixing of pole base with nut and bolt to PCC pedestal/coping complete all as specified and directed.

S&F LED flood light fitting sqaure shape 100 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp, bracket with impact and corrossion resistant complete with IP 65/66 protection with suitable bolt and nuts, fixing at any height upto 15m complete with making connection complete all as specified and directed

S&F LED street light fitting 25 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrossion resistant complete with IP 65/66 & IK 08 protection including fixing with suitable bolt and nuts complete with making connection complete all as specified and directed.

S&F Decorative, surface mounting, dome shaped pendant in green & black finishes including 01x LED retrofit bulb 7 watt, 6500K, efficacy not less than 90 lumen/watt, complete including making connection complete all as specified and directed.

S&F surface mounted COB LED light 15W heat resistant complete with driver, lamp bracket with impact and corrossion resistant for bed light complete all as specified and directed

S&F in replacement sub main two single core PVC copper conductor unsheathed wire multi stranded 4 sqmm along with earth wire 4.0 sqmm copper conductor single core wire connected by common earth in existing surface/recessed PVC/steel conduit complete all as specified.(Note :- two lengths of 4.0 sqmm cable and one length of 4.0 sqmm earth cable will be measured as one running length)

S&F in replacement sub main two single core PVC copper conductor unsheathed wire multi stranded 6 sqmm along with earth wire 6.0 sqmm copper conductor single core wire connected by common earth in existing surface/recessed PVC/steel conduit complete all as specified.(Note :- two lengths of 6.0 sqmm cable and one length of 6.0 sqmm earth cable will be measured as one running length)

S&F in replacement sub main two single core PVC copper conductor unsheathed wire multi stranded 10 sqmm along with earth wire 10.0 sqmm copper conductor single core wire connected by common earth in existing surface/recessed PVC/steel conduit complete all as specified.(Note :- two lengths of 10.0 sqmm cable and one length of 10.0 sqmm earth cable will be measured as one running length)

S&F in replacement sheet metal encloser double door 4 way TPN 415V ISI marked complete with neutral and earth link and bus bar complete made out of CRCA steel sheet Factory made including blanking plate for unused module complete all as specified and directed

S&F in replacement sheet metal encloser double door 8 way TPN 415V ISI marked complete with neutral and earth link and bus bar complete made out of CRCA steel sheet Factory made including blanking plate for unused module complete all as specified and directed

S&F in replacement sheet metal encloser double door 12 way SPN 240V ISI marked complete with neutral and earth link and bus bar complete made out of CRCA steel sheet Factory made including blanking plate for unused module complete all as specified and directed

S&F in replacement single pole and neutral enclosure 240V with a two pin and earth plug and socket complete with one double pole MCB 20Amp complete all as specified and direcetd

Supply, installing, test and commissioning (in replacement ) of indoor type LT panel wall mounted, having dimensions not less than 1.4mx0.8mx0.2m with double door made out of 2 mm thick CRCA sheet metal weather proof, with thimble and cable entry boxes with cable glands, having 07 Nos compartments for fixing of meters having acrylic cover. Panel should covered from all sides with front and back lockable door and hinges complete with copper bus bar of capacity 200 Amps with heat shrinkable PVC sleeve, with an angle iron Base Frame grouted in wall complete including painting with Paint shade of Epoxy based Powder Paint RAL 7032 & DMC insulators and consisting of the following :- (a) Incoming MCCB, 63 Amps, 4pole, 415volts 16KA - 01No (b) Outgoing MCB, 32 Amps, SPN , 230 volts 10KA B Curve- 06 No (Outgoing one for each DU) (c) Outgoing MCB, 10 Amps, SPN , 230 volts 10KA B Curve- 01 No (Outgoing one for each DU) (d) Internal Power & control wiring with suitable PVC insulated FR single core multistranded copper wire cable. (e) Indicating lamp set RYB ,type -01 Set. Note:- 1. Meters as dismentaled during panel replacement to be deposited in E/M store and shall be refixed into the meter boxes after installation. 2. Drawing of meter box panel must be approved by Engr-In Charge before placing order.

S&F in repair MCB 6-32 Amp 240V SP 10 KA ‘B’ series complete all as specified

S&F in repair MCB 40-63 Amp 240V SPN 10 KA ‘C’ series complete all as specified

S&F in repair MCB 415V 40 to 100Amp TPN 10 KA ‘C’ series complete all as specified

S&F RCBO for EARTH LEAKAGE, OVERLOAD & SHORT- CIRCUIT PROTECTION 415 V 40-63A AC type 10kA Four pole 30mA ISI marked complete all as specified

S&F in repair MCCB 415V, FP 63A 16kA complete all as specified

S&F in repair MCCB 415V, FP 100A 16kA complete all as specified

S&F in repair MCCB 415V, FP 125A 16kA complete all as specified

M & L for earthing with galvanized steel plate electrode 600 x 600 mm x 6 mm size directly burried in ground vertically to earth pit not less than 2.25 meter deep below normal ground level with top edge of the earth plate not less than 1.5 m below normal ground level surrounded with coal dust and common salt filling in alternative layers of 15 cm thick each connected to and including GI earth wire 4 mm dia by means of nuts, bolts, check nuts & washers etc connecting to earthing test point, main switch board and including 15 mm dia GI pipe light grade for protection of earth lead from earth plate to distribution board and 20 mm dia GI pipe medium grade connected with funnel having wire mess for watering purpose including necessary excavation and earth work, PCC (1:2:4) type B-1 (using stone aggregates) for earthing pit, 10mm thick cast iron cover with angle iron frame all as specified and shown in electrical plate No 3 of SSR Part-I and testing on completion including replacement of old unserviceable. Note:- It is mandatory to paint a sqaure shape notice board of yellow color with legible black color letters of earthing mentioned details as below; Cost incurred deemed to be inlcuded in quoted rate:- (i) CA No. (ii) Date of installation after initial testing & Value of earth resistance in Ohm (iii) Date of last testing (iv) Value of earth resistance in Ohm in last test

M&L for painting staircase meter box/LT Panel including removing old paint, cleaning with scrapers of preparation of pld painted surface, complete with filler and making smooth surface, priming with red oxide primer and painting with two coat of synthetic enamel paint with approved color complete all as specified

S&F in repair rigid non metallic PVC conduit medium grade 25 mm nominal dia, 'ISI marked' inclusive of all fittings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing accessories such as couplers lock nuts, saddles, pipe hooks etc for telephone socket, complete all as specified.

S&F in repair rigid non metallic PVC conduit medium grade 32 mm nominal dia, 'ISI marked' inclusive of all fittings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing accessories such as couplers lock nuts, saddles, pipe hooks etc for telephone socket, complete all as specified.

S&F in repair Hylam sheet cover 3mm thick of size 5"x5" complete with machine screw/ washer with provision of slots for switches, sockets, fan regulators (including refixing of all switches, sockets, fan regulators dismentaled from existing sheets) complete all as specified

S&F in repair Hylam sheet cover 3mm thick of size 8"x5" complete with machine screw/ washer with provision of slots for switches, sockets, fan regulators (including refixing of all switches, sockets, fan regulators dismentaled from existing sheets) complete all as specified

S&F in repair Hylam sheet cover 3mm thick of size 13"x8" complete with machine screw/ washer with provision of slots for switches, sockets, fan regulators (including refixing of all switches, sockets, fan regulators dismentaled from existing sheets) complete all as specified

S& F in repair modular metal flush box 3 module complete all as specified and directed.

S& F in repair modular metal flush box 8 module complete all as specified and directed.

S& F in repair modular metal flush box 12 module complete all as specified and directed.

S& F in repair white cover plate wih frame 3 module including blanking plate for unused complete all as specified

S& F in repair white cover plate wih frame 8 module including blanking plate for unused complete all as specified

S& F in repair white cover plate wih frame12 module including blanking plate for unused complete all as specified

S&F in repair surface mounting box 1 module (for 01x switch) complete all as specified and directed.

S&F in repair surface mounting box 3 module (for 03x switch) complete all as specified and directed.

S&F in repair surface mounting box 3 module( 1xsocket, 1xswitch) complete all as specified and directed.

S&F in repair surface mounting box 6 module( 2xsocket, 2xswitch) complete all as specified and directed.

M&L in replacement for earthing circuit wiring with multi-stranded copper conductor, single core, FRLS, PVC insulated and unsheathed cable of size 1.5 sqmm, run through existing conduit connected to existing terminal/socket point outlet/ MCBs etc complete all specified and directed Note:- One run of cable in existing concealed conduit/surface drawn with suitable saddling shall be measured as one Running metre(RM) and shall deemed to be included in the quoted rate.

M&L in replacement for earthing circuit wiring with multi-stranded copper conductor, single core, FRLS, PVC insulated and unsheathed cable of size 2.5 sqmm, run through existing conduit connected to existing terminal/socket point outlet/ MCBs etc complete all specified and directed Note:- One run of cable in existing concealed conduit/surface drawn with suitable saddling shall be measured as one Running metre(RM) and shall deemed to be included in the quoted rate.

M&L in replacement for earthing circuit wiring with multi-stranded copper conductor, single core, FRLS, PVC insulated and unsheathed cable of size 4.0 sqmm, run through existing conduit connected to existing terminal/socket point outlet/ MCBs etc complete all specified and directed Note:- One run of cable in existing concealed conduit/surface drawn with suitable saddling shall be measured as one Running metre(RM) and shall deemed to be included in the quoted rate.

M&L in replacement for earthing circuit wiring with multi-stranded copper conductor, single core, FRLS, PVC insulated and unsheathed cable of size 6.0 sqmm, run through existing conduit connected to existing terminal/socket point outlet/ MCBs etc complete all specified and directed Note:- One run of cable in existing concealed conduit/surface drawn with suitable saddling shall be measured as one Running metre(RM) and shall deemed to be included in the quoted rate.

Supply, laying & testing Tubes(In Repair), 'light grade' galvanised, 40mm bore with all fitting, unions, elbows etc and fixed complete to walls and ceilings or laid in floors complete all as specfied

Supply, laying & testing Tubes(In Repair), 'light grade' galvanised, 50mm bore with all fitting, unions, elbows etc and fixed complete to walls and ceilings or laid in floors complete all as specfied

M&L Cement concrete in pole/plateform foundations, filling and mass concrete of 1:4:8 type D2 using 40mm graded stone aggregate all as specified and directed.

M&L Providing plain cement concrete type C1 (1:3:6) using 20 mm graded stone aggregate as in coping including necessary form work and finishing exposed surface all as diected.

S&F GI bracket of 40 mm dia bore medium grade 1.2 meter lay bend to shape including MS clamps made out of flat iron of size 40 X 5 mm- 02 Nos and necessary nuts, bolts, washers as required for fixing of street light fitting

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

S&F in repair non metallic PVC casing capping medium grade 10mm x20 mm nominal size, 'ISI marked' inclusive of all fittings and all fixing accessories complete all as specified.

S&F in repair non metallic corrugated flexible PVC conduit medium grade 20 mm nominal size, 'ISI marked' inclusive of all fittings and all fixing accessories complete all as specified.

S&F in repair Bed Switch piano, single pole, one way 6 Amp complete all as specified

S&F in repair Hanging bell push switch, single pole, one way 6 Amp complete all as specified

S&F in replacement wired nurse call bell system for 40 bed including digital display panel complete including of following:- (a) Display call station having numeric display, facility to acknowledge, buzzer etc, complete as per specification (b) Digital Numeric Display (c) Bright red colored Numerics (d) Audio alert-Soft Ding Dong Bell on every push of a call button (e) SMPS(switch mode power supply) inbuilt 220/5V (f) Display have provision for displaying multiple call request at the same time (g) Receiving end panel/ Console produce buzzer sound/ audio alert soft ding dong on pressing remote calling device (h) Panel/ console have provision to cancel the individual request (j) Panel/ Console sourced by 230V (k) 40 Beds Display system

Checking of non functional point wiring such as light point, fan, socket 5/15A independent board, same board, power point, switches 5/15A, sockets 5/15A, switch board, Call Bell, bell push, MCBs, DBs etc and find out faults at site and making proper functional and repairing to cable connection/ loose connection and refixing by replacing by new screws etc and testing complete all as specified and directed Note:- (i) Necessary T&P required at site will be provided by the contractor and cost of T&P deemed to be included in the quoted rates. (ii) The contractor is bound to provide one electrician and one helper for attending the complaints. The rate of the same deemd to be inlcuded in quoted rate by the contractor

Supplying and fixing in replacement 1100volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 6sqmm complete all as specified

NOTE :- ARMAAN COMPLAINT/DAY TO DAY/DOOR TO DOOR COMPLAINTS:- Complaints regarding repair/replacement to these items to be attended unconditionally. All in cost incurred upon deemed to be included in respective items

Note:- Net contract sum shall be calculated after deduction of Sch of credit.

M/S SODHI ASSOCIATES

Aman Enterprises

M/S KARTIK BUILDERS

SWARN SINGH AND CO.