REPAIR AND REPLACEMENT OF SAND FILLING AND EARTH FILLING AND MISC ITEMS FOR FIRE RANGE AT TECH AREA, 8FBSU, AF STN AWANTIPUR

Amount

Supply and stacking of HDPE bags filled with minimum 35 kgs of sand sealed by steaching inclusing replacement of old unserviceable bags complete all as specified and directed.

Supply and spreading the sand and saw dust duly mixed in 1:1 ratio and raising height not exceeding 5.00mtr from ground level including excavation and removal of existing material from site complete all as specified and directed.

Dismentalling of plain or corrugated steel sheeting of any gauge, thickness etc in roof coverings/cladding/eave etc complete all as specified.

S&F galvanised corrugated mild steel sheeting, with two corrugation side lap fixed with 'L' type or 'J' type or cranked hooked bolts with washers in roof, 0.63mm thick, grade-O quality, with 120 grms/sqm zinc coating and grade 'B' Class 8 complete all as specified and directed by Engineer-in-Charge.

Refixing Plain or corrugated steel sheeting, any gauge, thickness, roof coverings with two corrugation side lap fixed with L' type or 'J' type or cranked hooked bolts and dome type bitumen washers complete all as specified and directed by Engineer-in-Charge. Note:-serviceable sheets obtained under item No 01 above shall be re-used.

Dismantling floor hearth or wall tiling including cement mortor bedding (but not backing) removing the rubbish of the premises complete.

M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment and including screed bed of 20mm thick in CM (1:4) etc.complete all as specified

Demolition of cement concrete to ground floor(unreinforced) and paving n.exc 15cm thickness (below or above ground level) and removing rubbish of out side MOD land, complete all as specified and directed.

M & L 75 mm thick PCC (1:3:6) type C-2 using 40mm graded aggregate as in plinth protection even and smooth without using extra cement complete all as specified and directed.

M&L 100mm thick Cement concrete 1:2:4 Type B-2 (using 40mm graded stone agreegate) as in flooring including finshing even and smooth without using extra cement complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid beded and pointed in any mortar, complete all spd and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including 20mm thick screed bed in cement mortor (1:6) laid and jointed with gray cement slurry mixed with pigmen complete all as specified & directed.

Taking down (Steel/ Wooden) chowkhats of frames of any description exc 1.50 sqm but n exc. 4 sqm each with shutters (without taking off shutters from the frames) and making good disturbed portion complete all as specified and directed.

S & F Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applying a shop coat of red oxide primer including providing PCC 1:3 :6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats, complete all as specified and as directed by the Engineer-in-Charge .

S&F 35 mm thick Second class hard wood factory made Plain framed, panelled shutter (single panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated as directed by Engineer-in-Charge.

S&F 100 mm long medium weight stainless steel butt hinges with stainless steel screw complete.

S&F extruded aluminum alloy handles of size 150mm fabricated type anodised complete.

S&F Aluminium alloy anodised barrel tower bolts of extruded section 150 mm long and fixed complete.

S&F Aluminium alloy, anodised, sliding door bolt size 200mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

M&L for preparing of new or previous untreated steel surfaces over 10cm width or girth and making good including primer and make the surface smooth by rubbing with sand papers etc and applying two coat of synthetic enamel paint complete all as specified and directed.

M& L for preparation of new wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for Preparing old plastered or un-plastered surfaces of walls by scraping the surfaces, brooming down or steel wire brushing down smoke soot, mould, moss and efflorescence salts and trading oil and greasy spots etc and applying one coat of exterior acrylic emulsion paint in camouflaging (Disruptive) pattern in three colours (Green, grey and brown), complete all as specified and directed. Make : Asian/ Berger/ Nerolac/ ICI/ Shalimar/ Johnson.

M&L for complete removal of existing treatement by scraping, washing, rubbing down or stopping distempered or painted surfaces etc of walls plastered or un-plastered & removing all vegetation growth, cleaning to the entire satifactory of Engr-in-Charge & applying of Birla/JK white wall putty approx 3 mm thick in two layer as per manufacturer's instruction on existing prepared surface and make the surface smooth by rubbing with sand papers and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M & L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 on wall surfaces, finishing the surface even and smooth without using extra Cement complete all as specified. Note:- Intgral water proofing compound shall be measured and paid for separately.

Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified and directed

M&L for Brick work with sub class B bricks ,straight or curved on plan exc 6m mean radius built in CM 1:6 Complete all as Specified and directed.

M&L for Preparing new plastered or un-plastered surfaces of walls and applying two coats of cement based paint over a coat of primer, complete all as specified and directed. Make : Asian/ Berger/ Nerolac/ ICI/ Shalimar/ Johnson

Dismantling wall and ceiling boards (fibre pulp, insulation, etc) or insulation board/slabs/blankets any thickness including grid work/aluminium frame work, cover fillets complete all as specified.

S&F in repair for Prelaminated particle board 18/19mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to metal frame complete all as specified and directed.

Note :- An amount of Rs.4786.50 on account of credit schedule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S ABBAS M. ENTERPRISES (BID ID -3409869)

MS Ghulam Hassan and Sons (BID ID -3409768)

M/S ABDUL RASHID AND CO (BID ID -3408669)

nazir Ahmad Dar and sons (BID ID -3408913)

M/s Gh Qadir and Sons (BID ID -3410322)

BHAT CONTRACTORS AND GENERAL ORDER SUPPLIERS (BID ID -3410154)

IR Infrastructure (BID ID -3404375)