REPAIRS TO COMPOUND WALL DRAINS AND JOINERY AT

Amount

Taking down chowkhats or frames with shutters n. exc. exceeding 1.5 Sq.m each (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkhats or frames with shutters exceeding 1.5 Sq.m and not exc. 4 Sq. m each (without taking off shutters from the frames) complete all as specified and as directed.

Taking down shutters of any description exc. 1.00sqm and n.exc.2.00sqm each complete all as specified and as directed.

S&F for Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified,

S&F for Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified,

S & F 35 mm thick, Factory made second class hard wood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and tred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); complete all as specified and as directed

S & F 30 mm thick Factory made Flush shutters, solid core construction, with block board core and plywood face panels, decorative faces on both sides veneered with lipping / frame to match complete all as specified and as directed .

S&F Box type Steel Windows/Ventilators double side shutters (Windows side hung type , Ventilators top hung) pressed steel frames made out CRC Sheet of 80x60x1.25mm double rebated, Shutters box type made out of CRC Sheet of 40x20x1.0mm , windows & ventilator shutter fixed made of glass and gauge fixed with box type hinges, Aluminium die cast handles for glass shutters, Iron flat type handles for mesh shutters, Telescopic stays, etc complete all as specified incl 12mm square guard bars/grill welded with steel frame (100c/c horizontically) all as specified and directed by Engineer-in-Charge. NOTE: (i) Payment under this item will be made combined for steel frames, steel shutters and Guard bard/Grill, However unit rate quoted shall deemed to include cost of beading, fittings such as handles, hinges,Telescopic stays, locking arrangements and fixing of glass and wiremesh etc. (ii) Supply only 4 mm thick sheet glass and stainless steel wire mesh be measured and paid separately. (iii) Weight of Grill/Guard Bars, handle,hinges and locking arrangements shall also deemed to be included in the quoted rates.

S&F for Anodised aluminium powder coated frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F powder coated Aluminium section for door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, powder coated aluminium shap beading screws etx complete all as specified

S&F Anodised Aluminium powder coated windows sliding windows frame section weighing not less than 0.980kg/m sliding type (Three track frame) with jointing cleat, beadings etc. for and including fixing of aluminium anodised skelton windows & shutter section weighing not less than 0.55kg/m fixed with glass or gauge, without sash bars using standard aluminium section incl necessary jointing cleats, glazing clip, rubber packing, anodised aluminium snap, beading screws, anodised aluminium fittings such as handles, locks, stainless steel adjustable friction stay hinges etc complete all as directed by Engineer-in-Charge. Note :- Unit rate quoted against this item shall include cost of rubber beading, fitting such as handles, SS friction stay hinges and fixing of glass & Stainless Steel wire mesh etc. complete all as specified and as directed.

S&F Anodised Aluminium powder coated Ventilators with frames suitable for top portion with fixed wire mesh and louvers with glazing, bottom portion with fixed glass (Pinhead glass) incl jointing cleat for fixing glass, wire mesh etc incl necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap-beadings, screws, anodised aluminium fittings such as handles stainless steel adjustable friction stay hinges etc as required complete all as directed by Engineer-in-Charge. NOTE:- Unit rate includes cost of rubber beading, fitting such as handle, SS friction stay hinges and fixing of glass stainless steel wire mesh etc. complete all as specified and as directed.

S&F Aluminium powder coated grill (anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standared section and fixed to the existing window frame with CP brass /stainless steel screws @ 200mm c/c, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all comnplete as per requirement and direction .

Supply only 5.5mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

Supply only 3.00 mm thick figured glass pin head type obscured or frosted on one side and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed

Supply only Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Door closer hydraulically regulated, designation No. 2,universal type, Aluminium (extruded section body) suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and as directed.

Supply and fixing Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube in openings all as specified .

Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site all specified and as directed.

Supply and fixing 18 mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber frame work all as specified and as directed

Supply and fixing in repairs Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples all as specified and as directed

Supply and fixing 100 mm long butt hinges, extruded aluminiun alloy with galvanised mild steel himges, anodised and fixed.

Supply and fixing 100 mm long butt hinges, medium weight cold rold mild steel and fixed.

Supply and fixing 150 mm long aluminium, anodized barrel tower bolts of extruded section all as specified

Supply and fixing 200 mm long aluminium, anodized barrel tower bolts of extruded section all as specified

Supply and fixing 100mm long extruded alluminium alloy handle, cast type, anodized all as specified

Supply and fixing 150mm long extruded alluminium alloy handle, cast type, anodized all as specified

Supply and fixing 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified

S & F in repairs old Floor door of stopper aluminium alloy body and tongue, 150 mm overall length, anodised, with hard drawn steel spring, fixed in floor all as specified and as directed

S&F in repairs piano hinges and Supply and fixing Continuous (piano) hinges, mild steel, bright finish or electrogalvanised (40 mm width of flaps when open ) all as specified and as directed

S & F in repairs old helical spring and Supply and fixing Mild steel helical spring, 375 mm long, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed .

S & F in repairs door closer and Supply and fixing aluminium Door closer , aluminium die cast body , hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed .

Material and labour for Welding in repairs not exc 2.5 cm in length , thickness of Metal to be welded not exc. 6 mm complete all as specified and as directed.

Material and labour for Hacking out old broken glass (any thickness, size, quality or description) from metal frame exc 1.5 Sq.m, including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed

Supply and fixing 4.8 mm thick sheet glass, ordinary quality fixed with PVC / neoprene gasket , angular glazing aluminium beads, rubber packing and glazing in squares n exc 0.5 sq m Each pane for sliding rack with sliding handle all as specified and as directed

Supply and fixing 4 mm figured glass, pin headed type, ordinary quality and glazing with oil putty in squares n exc 0.5 sq m Each pane all as specified and as directed

Supply and fixing 4 mm sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq m Each pane all as specified and as directed

Cutting holes into or through stone / brick walls, Superficial area not exc. 150 sq. cm, built in cement mortar 1:3 and making good or cement concrete 1:2:4 type B-l as required complete all as specified and as directed .

Material and labour for providing cement concrete 1:3:6, type C1, using 20 mm graded crushed stone aggregates as in bed blocks for fixing hold fasts etc., complete all as specified and as directed .

Supply and fixing Second class Hard wood plain fillets, exc 3 Sq cm and not exc 6 Sq cm area, square, rectangular or triangular in section, clean sawn, secured with nails or brads complete, as specified and as directed

S&F in repairs gear operated Steel rolling shutters, having interlocking arrangement of MS sheet laths made out of 1.25 mm thick with ball bearing, as specified including top cover, anchoring rod, hasp and staple guide channel and one shop coat of primer; erected in position as indicated, complete; push & pull or manual type complete fixed as in repair all as specified in SSR 2009 (Part-I) and as directed.

Dismantling boarding, any description, fixed in any position with screws.

M&L for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet PVC sheet inclusive of solvent cement and fixing at site on PVC frame as specified and directed.

M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as pspecified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete

M & L for rendering 15mm thick in cement mortar (1:4) on brick and concrete surfaces finished even and smooth without using extra cement

M&L for two coats of oil bound distemper over one coat of Priming plastered and other surfaces with alkali resistant priming paint on newly plastered wall surfaces including preparation all as specified and as directed.

Material and labour for preparing surfaces of old steel and iron surfaces, not otherwise described, over 10cm width or girth and applying one coat of aluminium paint, complete all as specified and as directed .

Material and labour for preparing surfaces of steel and iron surfaces, new or previously untreated surfaces, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified.

Material and labour for preparing surfaces of wooden surfaces, new or previously untreated surfaces, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar , including all quions, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M & L for Walling of squared rubble,regular coursed, well bonded,bedded and solidly hearted masonary built in cement mortar 1:6 including hammer dressing all as specified and directed.

All as per above Item No 54 but except material , complete all as specified and directed.

M&L for raised pointing to rubble or polygonal rubble, uncoursed or brought up to coarse with CM 1:3 complete all as specified and as directed.

Material and labour for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width Type C1 1:3:6 (20 mm graded crushed stone aggregate ) and setting in mortar cement mortar 1:6,complete all as specified and as directed.

M&L for concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) in foundation, filling and mass concrete all as specified and directed.

M&L for Cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) of 75mm thick as in plinth protection complete all as specified and as directed..

Demolition of Concrete of any description (reinforced) and in any position not otherwise specifically provided for all as specified.

M & L for Providing precast cement concrete type B1 1:2:4 (20mm graded crushed stone aggregate) set in cement mortar 1:4 in cover slabs (for man holes etc.) and similar articles with plain faces all as specified and as directed.

M & L for Mild steel bars 6 to 8mm mm dia for stirrups cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified.

M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Cement Base Paint of approved tint over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified

Dismantling of Stone slabs and tiles of any description or thickness laid dry in floors, aprons etc.

M&L for Cement concrete 1:4:8 type D-2 (using 40mm graded agg) of 75mm thick as in sub base complete all as specified and as directed.

M&L for Heavy duty coloured Chequered cement concrete tiles 30cm x30cm x 25 to 30mm thick,laquered finish type set, jointed and pointed in neat cement slurry with gray cement and pigment in floors complete all as specified and as directed.

M&L for coloured Machine pressed rubber moulded precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and as directed.

M & L for sand filling pathway in layers n. exc 30cm thick, including watering and consolidation as directed

M&L for Cement concrete 1:5:10 type E-2 (using 40mm graded crushed stone aggregate) of as in sub base to pavings complete all as specified and as directed.

M&L for Cement concrete 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) of 100mm thick finished even and smooth with out using extra cement incl. spike rolling to surface or making impressions of expanded metal, while the concrete is green.

M&L for Providing, cement concrete 1:2:4 type B0 (12.50mm graded crushed stone aggregate) in copings, kerbs or mud stops, rounded or chamfered on edges including necessary form work complete all as specified and as directed.

Dismantling barbed wire fencing of any description

S & F for Galvanised 2 strand, steel barded wire 2.24mm dia barbed with 2mm dia barbs at 75mmmm spacing and straining and fixing to any type of strandard rails straning bolts, incl, securing or tying at crossings with and provision of galvanised mild steel, wire staples or steel pins etc complete all as specified and directed. (each line wire to be measured separately).

S&F for zinc coated Concertina coil (dia appox 610 mm) with core wire of thickness 2.60 mm having tensile strength not less than 1650 N/Sqmm and zinc coating 230 GSM and 0.5 mm thick cold rolled carbon strip having 50 numbers of spiral turns having zinc coating 120 GSM with 125 clips per coil of 1.6 mm thickness .The approximate weight of Concertina coil shall be 8.50 Kg per Running Metre and could be stretched to cover a distance of 6 to 7 running metres fixed at 3.00 m height wall on angle iron Y shaped which is placed 2.40 m to 3.0 m above the ground level complete all as specified and directed. Note- The measurments shall be recorded for the stretched length of Concertina coil.The contractor shall quote his rate accordingly. (The contractor shall submit test certificate from Govt approved Labortory for Concertina coil)

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. Or for shafts, wells, cesspits, manholes, pier holes, etc. N exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard/dense soil all as specified.

Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in surface channels, drains etc.

Extra for forming fair finished drain or channel up to 55 cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/stopped ends etc.

M & L for framed work such as grill, gratings, etc with ends of bars shoulderedand /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work corn-conforming to Fe.290. Gde -E-165, complete all as specified and directed.

Removing excavated material to a distance n,exc 50 Mtr and depositing where directed at a level of n,exc 1.5 m above the strating point in soil omplete all as specified.

M&L for preperation of old decorated wall surfaces including brooming down or steel wire brushing, scraping down smokes soot, module, moss and effloroscent salts, trading oil and gresy spots and applying one coat of cement based paint on walls complete all as specified.

Removing building materials etc,exc 1.5km to a distance 5 km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

PRAGATHI BUILDERS

G K CONSTRUCTIONS