Construction work commenced on the paved road stretching from Munni Nurse house in Mahoba Kaharan locality to Pokhtadraza School including the installation of rubber-molded interlocking blocks and covered drains on both sides

Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with in all lifts and lead upto 1000 metres.

Providing, laying, spreading and compacting stone aggregates of 22.4-53mm size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, screening Type-B to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.

Providing and applying tack coat with V.G.-10 Bitumen using distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects.

Providing and laying of hot applied thermo plastic compound 2.5 mm thick including reflecto rising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass breads as per IRC 35. The finished surface to be level uniform & free from streaks and hole. in egdes and center line.

Providing & laying cement concrete 8:4:1(1 Cement: 4 fire sand: 8 graded brick aggregate 40 mp Goncrete with 40 mm Gauge Brick blast with nominal size) including supply of all materils, labour and tools and plantas etc. requirad for proper completion of the work (SI No. 275)

supply and fixing of 80mm Rubber Molded paver block including cost of material and laver as per analysis attach with estimate.

Ex. In foundation in ordinary soil (loan cly or sand) includinng Lift upto 1.5 mt. and lead up to 30mt. (SI No. 251)

Providing & laying cement concrete 8:4:1(1 Cement: 4 fire sand: 8 graded brick aggregate 40 mp Goncrete with 40 mm Gauge Brick blast with nominal size) including supply of all materils, labour and tools and plantas etc. requirad for proper completion of the work (SI No. 275)