COMPREHENSIVE REPAIR/ MAINT OF BLDG NO O-7, O-5, O-9, O-3, O-1, O-6 AND OTHER MD ACCN INSIDE FORT WILLIAM UNDER GE (FW) KOLKATA

Amount

M&L for Taking down cement plaster in any description on brick or stone wall etc incl racking out joints. hacking for key scrubbing down with water etc.

Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing tiles from site and rubbish off the premises complete all as directed by Engr-in-Charge.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for all as specified and directed by Engr-in-Charge.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars etc all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames with shutters (w/o taking off shutters from the frames) area not exceeding 1.5 sqm each and removing from the site complete all as directed by Engineer-in-charge.

Taking down chowkats or frames with shutters (w/o taking off shutters from the frames) area exceeding 1.5 sqm and not exceeding 4 sqm each and removing from the site complete all as directed by Engineer-in-charge.

Taking down shutters of any description area not exceeding 1.00 sqm each and removing from the site complete all as directed by Engineer-in-charge.

Taking down shutters of any description area exceeding 1.00 sqm and not exceeding 2.00 sqm each and removing from the site complete all as directed by Engineer-in-charge.

Taking down old broken glass (any thickness, size, quality or description) from wooden frames, steel window or stone concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed by Engr-in-Charge.

Dismantling structural steel work of any description including doors, gates, railing etc but excluding framed trusses all as directed by the Engineer-in-Charge.

Dismantling unframed timber scantling 40 Sqcm and over in section, in any position all as specified and directed by Engr-in-Charge.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified

Dismantling of plain or corrugated steel sheeting any gauge or any thickness in roof covering including stacking serviceable materials of re-use and removing unserviceable materials complete all as specified and directed.

M&L for applying one coat of white wash to old decorated (white washed) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge.

M&L for applying one coat of white wash to old decorated (white washed) surfaces of ceiling including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge.

M&L for applying one coat of oil bound distemper to old decorated (distempered) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge.

M&L for applying two coats of oil bound distemper to old decorated (distempered) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge.

M&L for complete removal of existing treatment of old wall surface and applying two coats of oil bound distemper over a coat of alkali resistant primer applied over 1 to 2mm thick BIRLA/JK water proof wall care putty complete all as directed by Engr-in-charge.

M&L for applying one coat of oil bound distemper to old decorated (distempered) surfaces of ceiling including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge.

M&L for applying two coats of oil bound distemper to old decorated (distempered) surfaces of ceiling including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge.

M&L for applying one coat of cement base paint to old decorated (cement base painted) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge.

M&L for applying one coat of synthetic enamel paint to old painted steel surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed by Engineer -in-Charge.

M&L for applying one coat of synthetic enamel paint to old painted wooden surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed by Engineer -in-Charge.

M&L for applying one coat of synthetic enamel paint to old painted brick, stone, concrete, asbestos cement or plastered surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed by Engineer -in-Charge.

Material & labour for preparing old exterior emulsion paint surfaces of walls by washing, rubbing down stopping of painted surfaces and applying one coat of exterior emulsion paint weather coat, complete all as specified and as directed.

Material & labour for preparing old exterior emulsion paint surfaces of walls by washing, rubbing down stopping of painted surfaces and applying two coat of exterior emulsion paint weather coat over one coat of primer over wall care putty avg thickness 1-2 mm, complete all as specified and as directed.

M&L for applying one coat of plastic emulsion paint to old painted brick, stone, concrete, asbestos cement or plastered surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed by Engineer -in-Charge.

M&L for applying one coat of varnishing on old treated wooden surfaces of any description over 10 cm width or girth including cleaning and preparation all as specified and directed by Engr-in-Charge.

M & L Cleaning of floor with water & polishing with mansion polish complete all as specified and directed by Engr-in-Charge.

M & L for brick work using old size sub class 'B' bricks straight or curved on plan exec 6 metre mean radius, built in cement mortar 1:6 all as specified and directed by Engr-in-Charge.

M & L brick work using old size sub class 'B' bricks straight or curved on plan to any radius in half brick wall, built in cement mortar 1:4 all as specified and directed by Engr-in-Charge.

M&L for 15mm thick rendering in cement mortar (1:6) to fair faces of brick or concrete wall surfaces finished even & smooth without using extra cement all as specified and directed by Engineer -in-Charge.

M&L for 10 mm thick rendering in cement mortar (1:4) to fair faces of brick or concrete ceiling surfaces finished even & smooth without using extra cement all as specified and directed by Engineer -in-Charge.

M&L for Waterproof (elastic and breathable) film coating in two layer( as per manufacturer instruction) ,patch repair of Damp & repaired walls over old or new plastered surfaces of walls including preparations of wall complete all as directed by Engineer -in-Charge.( make -sure seal, Berger, Dr Fixit etc

M&L for preparation of newly plastered ceiling surfaces and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer complete all as specified and directed by Engineer -in-Charge.

M&L for preparation of newly plastered wall surfaces and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer applied over 1 to 2 mm thick plaster of Paris complete all as specified and directed by Engineer -in-Charge.

Supply and fix non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and incl 15 mm screed bed in 1:6 complete all as directed.

Supply and fix non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and incl 10 mm rendering in CM 1:3 complete all as directed.

Supply and fix non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n exc 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and incl 15 mm screed bed in 1:6 complete all as directed.

Supply and fix non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n exc 0.38 sqm in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and incl 10 mm rendering in CM 1:3 complete all as directed.

Material and labour for 300mm X 450mm X 7mm thick decorative type wall tiles (coloured) joint free as in vertical surfaces of and jointed with neat cement slurry and pointed in white/coloured cement to match the surface laid over and including 10mm thick rendering in CM(1:3) complete all as specified and as directed by the Engr-in-Charge.

Material and labour for 300mm X 600 mm X 7mm thick decorative type wall tiles (coloured) joint free as in vertical surfaces of and jointed with neat cement slurry and pointed in white/coloured cement to match the surface laid over and including 10mm thick rendering in CM(1:3) complete all as specified and as directed by the Engr-in-Charge.

Supply and fix vitrified tiles(light shade) of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floor set and jointed in neat cement slurry @ 3 kg per Sqm and pointed in coloured cement to match the shade of the tiles over and incl. 15 mm screed bed in CM (1:6) complete all as directed.

Supply and fix vitrified tiles (light shade) of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in skirting set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles over and incl. 10mm rendering in CM (1:3) complete all as directed.

Supply and fix vitrified tiles(dark shade) of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floor set and jointed in neat cement slurry @ 3 kg per Sqm and pointed in coloured cement to match the shade of the tiles over and incl. 15 mm screed bed in CM (1:6) complete all as directed.

Supply and fix vitrified tiles ( dark shade) of 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in skirting set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles over and incl. 10mm rendering in CM (1:3) complete all as directed.

M&L for 8 mm thick moisture resistant high density fibre board (HDF) interlocking floor planks AC 5 Grade with highly wear resistant protective layer of aluminium oxide of approved design/pattern, fixed over 2000 Micron EPE foam layer over 200 micron polyethylene sheet with corner edge bidding complete all as per manufacturer's instruction all as specified and directed.

S&F 20 mm thick granite slab cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pavement to match the shade of granite stone incl grinding and polishing over and including 20mm screed bed in CM(1:6) completed all as directed.

S&F 20 mm thick granite slab as in vertical surfaces cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pavement to match the shade of granite stone incl grinding and polishing over and including 10mm rendering in CM(1:3) completed all as directed.

M&L pre polished Chequered cement concrete 25mm thick & area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors set , jointed & pointed with neat cement slurry with grey cement and pigment including 15 mm thick screed bed or bedding layer in cement mortar (1:6) over brushing with neat cement slurry with 3.00 Kg of cement per sqm completed all as specified and directed.

M & L for heavy duty coloured ceramic floor tiles of size 300 x 300x 10 mm thick, suitable for high traffic external tiles, anti skid, scratch resistance and neutral to UV rays and acid alkali resistance as in floor including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. (MAKE : JOHNSON, Model : ENDURA or equivalent model in other makes listed in the tender)

S&F 35mm thick precast cement concrete (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) louvers and jallies including all moulding, set in CM 1:4 all as directed by Engineer -in-Charge.

M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection/Paving etc, finished even and smooth without using extra cement as directed by the Engr-in-Charge.

M&L preparation of surfaces and pasting of wall paper of any design/ pattern/ shade, complete all as specified and approved by GE of Brand Nilaya of Make- Asian or equivalent in other approved makes of Nerolac/Berger.

S&F in repair coloured( any) PVC seat cover for EWC of any description with hinging device complete all as specified and directed by Engr-in-Charge.

All as per Ser No 55 but white seat cover for EWC

S&F in repair Plastic seat & cover, white, soft close type, for coupled water closet (of any description) incl chromium plated hinge complete all as specified and directed. (Make : PARRYWARE, Cat No: E8300 or equivalent make specified in tender.

S&F in repairs stainless steel round grating 150mm dia complete all as specified and directed by Engr-in-Charge.

S&F in repair chromium plated Hand shower (health faucet), brass body with 1.2 metre long flexible tube in chrome finish with wall hook complete all as specified and directed. (MAKE : JAQUAR, Cat No : ALD-573/ PARRYWARE, Cat No : T9941A1 / ESS ESS, Cat No: C-232D / CERA, Cat No: F8030401AB / HINDWARE, Cat No: F160002) or equivalent model in JAQUAR / CERA / HINDWARE) or equivalent make specified in tender.

S&F in repair various china coloured flat back wash hand basin of size 560mm x 430mm incl providing 32mm dia CP wasted coupling, CP bottle trap bracket, 32mm dia PVC waste pipe including taking down/out unserviceable Wash Hand Basin and making all necessary connections as di reacted by Engr-in-Charge. Model : VENICE N / CERA, Model: CONCORD / HINDWARE, Model: NEO LARGO / Jaquar, Model: ARIA) or equivalent make specified in tender.

S&F in repair various china white flat back wash hand basin of size 560mm x 430mm incl providing 32mm dia CP wasted coupling, CP bottle trap bracket, 32mm dia PVC waste pipe and making all necessary connections, fixed as directed by Engr-in-Charge Model : VENICE N / CERA, Model: CONCORD / HINDWARE, Model: NEO LARGO / Jaquar, Model: ARIA) or equivalent make specified in tender.

S & F vitreous china wash basin, white, counter top, size 450 x 400 mm oval shape excluding taps, waste, chain and plug and porcelain stopper complete all as specified and directed .(Make : Jaguar or equivalent as approved by Accepting Officer).

S&F in repair Chromium plated brass Angular stop cock, fancy type, concealed type with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No: CON-59KN / PARRYWARE, Cat No: G1453A1 / ESS ESS, Cat No: C-206 / CERA, Model: OCEAN / PRAYAG, Cat No: 9210 / HINDWARE, Cat No: F330043) or equivalent model in JAQUAR / CERA / HINDWARE/PARRYWARE) or equivalent make specified in tender.

S & F as in repair, 15 mm bore bib taps, fancy type, chromium plated long neck cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified.(Make : Jaguar or equivalent as approved by Accepting Officer).

S & F fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete al as specified and directed .(Make : Jaguar or equivalent as approved by Accepting Officer).

S&F in repair Chromium plated brass Wall mixer, concealed type, with concealed body, with overhead shower arrangement fixed with 15 mm bore Iron pipe including taking down existing mixer complete all as specified and directed. (Make : Jaquar, Cat No : CON-273KNUPR / PRAYAG, Cat No: 9275 / CERA, Model: OCEAN / PARRYWARE, Cat No: G1417A1 / HINDWARE, Cat No: F200020 / ESS ESS, Cat No: C-216) or equivalent model in JAQUAR / CERA / HINDWARE/PARRYWARE) or equivalent make specified in tender.

S&F in repair Chromium plated brass Wall mixer, concealed type incl concealed body, with both overhead and telephone shower arrangement, fixed with 15 mm bore Iron pipe including taking down existing mixer complete all as specified and directed. (Make : Jaquar, Cat No : CON-281KN / PARRYWARE, Cat No: G1417A1 / ESS ESS, Cat No: C-218 / CERA, Model : OCEAN / PRAYAG, Cat No: 9280 / HINDWARE, Cat No: F200022)or equivalent make specified in tender. NOTE: Telephone shower shall be measured and paid separately.

S&F fancy type chromium plated telephonic hand shower with flexible tube and hook screwed for iron pipe including frame complete all as specified and directed. (Make : PARRYWARE, Cat No: T9983A1/ Ess Ess, Cat No: HS 105) / PRAYAG, cat No: BHS-91S / CERA, Cat No: F7030502 / HINDWARE, Cat No: F160053 or equivalent make specified in tender.

S&F in repair 15mm dia fancy type chromium plated basin mixer foam flow screwed for iron pipe incl taking down old all as directed by Engr-in-Charge. (MAKE : ESS ESS, Cat No : C-211A / JAQUAR, Cat No : CON-167KNB / PARRYWARE, Cat No: G1414A1 / CERA, Model: OCEAN / PRAYAG, Cat No: 9250 / HINDWARE, Model: CONTESSA PLUS) or JAQUAR / CERA / HINDWARE/ PARRYWARE) or equivalent make specified in tender.

S&F in repair 15mm bore chromium plated two way bib cock with flange, fancy type complete all as specified and as directed. (Make : Ess Ess, Cat No: C-203 / JAQUAR, Cat No: CON-041KN/ PARRYWARE, Cat No: G1434A1 / CERA, Model : OCEAN / PRAYAG, Cat No: 9212/HINDWARE, CAT No: F330004CP) or equivalent model in JAQUAR / CERA / HINDWARE/PARRAYWARE) or equivalent make specified in tender.

S&F in repair Chromium plated brass Towel ring (premium quality) complete all as specified and directed. (Make : Ess-Ess, Cat No: AC-502 / JAQUAR, Cat No: ACN-1121BN / PARRRYWARE, Cat No: T6002A1 / PRAYAG, Cat No: BA-11 or equivalent model in JAQUAR / PARRAYWARE) or equivalent make specified in tender.

S&F in repairs toilet paper holder, surface type with flap incl taking down existing holder complete all as specified and directed. (Make : JAQUAR, Cat No : CAN-1153N / CERA, Cat No: F5007110 / PRAYAG, Cat No: BA-38 / ESS ESS, Cat No: AC-506 / HINDWARE, Cat No: F880003) or equivalent make specified in tender.

S & F as in repairs, brass chromium plated over head shower roses 125 mm size with or without swivel joint, including fixing to steel pipe or union all as specified and directed(Make : CERA, Cat No: F7040103 (for arm) & F7020305 (for shower) / PARRYWARE, Cat No: T9802A1 (for arm) & T9986A1 (for shower)/ESS ESS, Cat No: OH-104A / HINDWARE, cat No: F160051)or equivalent model in JAQUAR / CERA / HINDWARE/PARRAYWARE) or equivalent make specified in tender.

S&F in repair Aluminium body ( extruded section ) door closer hydraulically regulated, designation No 3 , universal type suitable for door shutters of 851 to 1000 mmm in width and weight between 61 to 80 kg as directed by the Engr-in-Charge. (make : Godrej, Cat No. 1938 or equivalent as approved by Accepting Officer).

S&F in repairs, Tubular towel rail (premium quality), 20mm dia, 600 mm long between flanges including brass chromium plated, complete all as specified and directed. (MAKE : JAQUAR, Cat No : ACN-111SM / PARRYWARE, Cat No : T6401A1 / ESS ESS, Cat No: AC-101 / CERA, Cat No: F5004103 / PRAYAG, Cat No: BA-20 / HINDWARE, Cat No: F840013 ) or equivalent model in JAQUAR / CERA / HINDWARE/PARRAYWARE) or equivalent make specified in tender.

S&F in repairs towel rack (premium quality) with lower hangar with hook incl taking down existing rack complete all as specified and directed. (Make : JAQUAR, Cat No: AHS-1581H / ESS ESS, Cat No: AC-308 / PARRYWARE, Cat No: T6008A1 / CERA, Cat No: F5003101 / PRAYAG, Cat No: BA-12) or equivalent model in JAQUAR / CERA / HINDWARE/ PARRAYWARE) or equivalent make specified in tender.

S&F in repair vitreous china floor mounted coupled closet (Pedestal pattern) coloured including low level vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, PVC coloured seat cover and connecting fittings including taking down existing water closet complete all as specified and directed. (Make : PARRYWARE, Model : Cascade NXT / CERA, Model : CLAIR / HINDWARE, Model: CONSTELLATION or equivalent model in JAQUAR) or equivalent make specified in tender.

S&F in repair vitreous china floor mounted coupled closet (Pedestal pattern) white including low level vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, PVC coloured seat cover and connecting fittings including taking down existing water closet complete all as specified and directed. (Make :CERA, Model : CALIBRE / ASIAN PAINTS, Model: PRIMUS / JAQUAR, Model: CONTINENTAL / HINDWARE, Model: ALPHA S 220 / PARRYWARE, Model: INDUS) or equivalent make specified in tender.

S&F in repair 6mm thick bevelled edge mirror of size as required fixed on 6mm thick acrylic PVC sheet complete all as directed by the Engr-in-Charge.

S & F chromium plated toilet tumbler holder in repairs (including with tumbler and chromium plated wall flange), fixing with stainless steel screws complete all as specified and as directed by the Engineer-in-Charge. (Make : Jaguar cat No. CAN 1141 N or its equivalent in make. ESS-ESS / ESSCO) or equivalent make specified in tender.

S&F in repairs 15mm dia soap dish, square, acrylic body with chromium plated base complete all as specified and directed. (Make : Jaquar, Cat No : AKP-35731P / PARRYWARE, Cat No: T6403A1 / ESS ESS, Cat No: AC-103 / PRAYAG, Cat No: BA-35 or equivalent model in CERA/HINDWARE) or equivalent model in JAQUAR / CERA / HINDWARE/ PARRAYWARE) or equivalent make specified in tender.

S&F Stainless steel kitchen rack of size 31" x 24" x 10" fixed in wall with screws and washer complete all as specified. Make- Prayag, Model No- P-340 or equivalent make specified in tender.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as in repair complete all as specified and as directed. Make : Ess, Cat No AC207 or equivalent make specified in tender.

S&F in repair corner glass shelf 200 mm with brass brackets, as in repair complete all as specified and directed. (Make: PRAYAG, Cat No: BEA-44 / JAQUAR, Cat No: ACN-1173 / PARRYWARE, Cat No: T6010A1 / CERA, Cat No: F5005102)or equivalent model in JAQUAR / CERA / HINDWARE/PARRAYWARE) or equivalent make specified in tender.

S&F in repair CP bottle trap with internal portion 32mm size with 190mm long wall connection pipe complete all as specified and directed (Make: JAQUAR, Cat No: ALD-769L250x190 / ESS ESS, Cat No: C-231C / HINDWARE, Cat No: F850003 / CERA, Cat No: F8060302/ PRAYAG, Cat No: BEA-26)or equivalent model in JAQUAR / CERA / HINDWARE /PARRAYWARE) or equivalent make specified in tender.

S & F in repair 15mm bore galvanised steel tubing (medium grade) with all fittings and fixed to walls and ceiling or laid in floors complete all as directed.

S & F in repair 20mm bore galvanised steel tubing (medium grade) with all fittings and fixed to walls and ceiling or laid in floors complete all as directed.

S&F in repairs vitreous china (coloured) wash down water closet pan (pedestal pattern) with 'P' or 'S' trap front or back inlet, fixing bolts(except flushing cistern and flush pipe) incl plastic water closet seat cover (coloured) and mild steel chromium plated or aluminium hinging device complete all as specified and directed by Engr-in-Charge. (Make : Parryware, Model : Elite / JAQUAR, Model: Continental / CERA, Model: Conventional / HINDWARE, Model: SLICK) or equivalent make specified in tender.

S & F in repairs Low density polyethylene pipe connection, comprising of 15 mm dia 450 mm long having PTMT union at each end of connection to each of pillar tap/cistern/stop cock/urinal etc. at one end, stop cock at other end complete all as specified and directed. (MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 or equivalent model in SHAKTI / JEXON or equivalent make specified in tender.

S & F in repairs Low density polyethylene pipe connection, comprising of 15 mm dia 600 mm long having PTMT union at each end of connection to each of pillar tap/cistern/stop cock/urinal etc. at one end, stop cock at other end complete all as specified and directed. (MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 or equivalent model in SHAKTI / JEXON or equivalent make specified in tender.

S&F in repair White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float, flush pipe and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed including taking down/out unserviceable Flushing Cistern and connected items complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART or equivalent model in COMMANDER or equivalent make specified in tender.

S&F 20 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

S&F 25 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

S&F in repairs Chromium Plated 25mm dia brass chromium plated curtain rod with fixing brackets, stops, rollers etc as directed by Engr-in-Charge.

S&F in repairs fancy type metal finish curtain bracket fixed to walls complete all as specified and directed by Engr-in-Charge.

M&L False ceiling with 'E' board "Classic" , reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on aluminium powder coated snap grid to support the boards/files with aluminium anodised main 'T' section 36mm x 25mm x 1.40mm cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides including hanging arrangements with 1.6mm dia GI wire and anodised adjuster and applying two coats of oil bound distemper over a coat of alkali resistant primer on exposed surfaces complete as in repair, all as specified and as directed.

S & F 10 to 12 mm thick gypsum board false ceiling including 0.55 mm thick GI perimeter channel, GI channel tray frame work having one flange of 20mm and another flange of 30mm with web of 27mm, fixed to surrounding wall using nylon sleeves and screws @ 450mm centre to centre / GI intermediate channel of size 45mm x 0.90mm thick with two flange of 15mm each suspended from the soffit of roof slab/ truss @1220mm c/c with MS angle of suitable size fixed to soffit of ceiling with GI cleat and expansion fasteners with and including ceiling section ( not exc 1.2 metre length ) of 0.55 mm thickness having kurled web of 50 mm and flange of 25 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel @ 457 mm centre to centre with necessary nuts and bolts and gypsum board screwed to ceiling section with stainless steel screws @ 230mm c/c including applying two coats of plastic emulsion paint over a coat of primer to exposed surfaces complete all as specified and directed.

S & F in repairs 100mm wide decorative corner bead ( of approved design) made of plaster of paris, fixed with screws all as specified and as directed by Engineer - in - charge.

S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified and as directed by Engineer-in-charge.

Cutting holes in to brick wall for inserting bold fast & making good dismantled portion in cm (1:3) or PCC (1:2:4) type B1, exe half brick but not exe 1 brick complete all as specified and directed.

S & F mild steel work holdfast, cleat etc. for door frame/ wooden batten etc. quality conforming to Fe-290 Gde- E-165 complete all as specified and directed.

S & F 35 mm thick 2nd class hard wood paneled shutters (any Nos of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle board with commercial face veneers, fitted to chowkats complete all as specified and as directed by Engineer-in-charge.

S & F 30 mm thick 2nd class hard wood Skelton shutters open rebated and prepare to receive glass, gauge etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc, size of members of shutters as specified in SSR Part-I, Section 8.24(b) and as directed by Engineer-in-charge.

S&F Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S& F 30mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engineer-in-charge.

S&F Aluminium door frame and operable shutter, windows and partitions and ventilators with one or more rebates including jointing cleat for fixing etc , complete all as specified and as directed.

S&F, Powder coated aluminium sliding window with shutter styles 40mm x20 mm sheet thickness 1.5mm Two shutter of glass and one shutter of wire mesh consisting of Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, frame (chowkat) of window shall 100mm x 44mm x 1.5mm thick section with or without rebate 5 mm thick tinted glass fixed with aluminium beads locking arrangement with each shutter all as directed by the Engineer-in-Charge. Note: 1) Size of window shall be as per site requirement. 2) Glass and wire cloth shall be included in this Rate.

S & F powder coating of any colour (Thickness or powder coating not less than 50 micron). Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S & F 5.0 mm thick Toughned glass good quality as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes as required complete all as specified and directed.

S & F 10.0 mm thick Toughned glass good quality as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes as required complete all as specified and directed.

Supply and fixing 4.8 mm thick sheet glass frosted on one side, area in squares exc 0.5 sqm in each pane and glazing with rubber gasket fixed to aluminium frame work / snap beading complete all as specified and as directed by the Engineer-in-Charge.

S & F Factory Made Solid PVC Door Frame of size 50 x 47 mm made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, as in repair complete all as specified and as directed.

S & F Factory Made Solid Panel PVC Door Shutter 30mm thick, consisting of frame made out of Mild Steel Tube of 19 Gauge thickness and size of 19mm x 19mm for Stiles and 15mm x 15mm for Top & Bottom Rails. Mild Steel Frame shall have a coat of Steel Primer of Approved Make and Manufacturer. Mild Steel Frame shall be covered with 5.0mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming Stiles and 5.0mm thick, 75mm wide PVC Sheets For Top Rail, Lock Rail & Bottom Rail on either side, and 10mm (5.0mm x 2) thick, 20mm wide Cross PVC Sheet as gap insert for Top Rail, Lock Rail & Bottom Rail. Panelling of 5.0mm thick PVC Sheet Beading on either side and joined together with Solvent Cement Adhesive, etc. An additional 5.0mm thick PVC Strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC Solvent Adhesive, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, as in repair complete all as specified and as directed.

S&F in stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples as directed by Engr-in-Charge.

M&L for preparation of new untreated wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer -in-Charge.

Supply & fixing 100mm stainless steel butt hinges(medium weight) cold rolled complete all as directed by Engineer-in-charge.

Supply & fixing 75mm stainless steel butt hinges(medium weight) cold rolled complete all as directed by Engineer-in-charge.

Supply & fixing 150 mm size aluminium anodised barrel tower bolts of extruded section (ISI marked) make: Alans/Classic all as directed by Engineer-in-charge.

Supply & fixing extruded aluminium alloy handle fabricated type anodised 100 mm size (ISI marked) make: Alans/Classic all as directed by Engineer-in-charge.

S&F 150mm long aluminium anodised handles (fabricated type) ISI marked (Make : Alans/Classic) complete all as specified and directed by Engr-in-Charge.

S&F 200mm long aluminium anodised tower bolts extruded section, ISI marked (Make : Alans/Classic) complete all as specified and directed by Engr-in-Charge.

S&F 300mm long aluminium anodised sliding bolt with hasp, staple (bolt type) and fixing clips or sheets cast of extruded section and fixing bolts and sliding bolts of extruded section ISI marked complete all as specified and directed by Engr-in-Charge.

S&F 3mm thick plain sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed by Engr-in-Charge.

S&F 4.8mm thick plain sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed by Engr-in-Charge.

S&F in repairs stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples as directed by Engr-in-Charge.

M & L in repairs 0.9mm thick decorative laminate type-1 (sunmica) of surface finish colour and pattern as approved fixed with approved adhesive as per manufacturer's instruction complete all as specified and directed by Engr-in-Charge.

S&F mortice lock in repairs vertical type 100mm dia size 6 levers of make: Godrej/Link/Harison complete all as specified and directed.

S&F in repairs coat hooks, solid body 175mm (six points) to 250mm of aluminium body and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs 40mm dia cup board knobs, fancy type all as specified and directed by Engineer-in-Charge.

S&F in repair Mild steel barrel tower bolts, stove enameled black, with bright bolt and fixed complete all as specified and directed by Engr-in-Charge.

S & F 2nd class hard wood timber wrought and fixed as in framed scantling over 40 Sqcm in section all as directed by Engr-in-Charge.

S&F 2nd class hard wood plain fillets, square or rectangular or triangular in section, wrought , cross sectional area exc 6 Sq cm but n exc 13 Sq cm, secured with nails including two coats of synthetic enamel paint over a coat of pink primer complete all as directed by Engr-in-Charge.

S&F in repair rubber gasket of size 50mm X 6mm suitable for air sealings of aluminium/wooden door, window etc. complete all as directed by the Engr-In-Charge

S&F in repair 12mm thick plywood grade BWR type B-B fixed with screws to timber frame works all as directed by the Engr-in-Charge.(Make : Greenply/Kit ply/Alishan) or equivalent as approved by Accepting Officer

S&F in repair 6mm thick plywood grade BWR type B-B fixed with screws to timber frame works as all as directed by the Engr-in-Charge.(Make : Greenply/Kit ply/Alishan) or equivalent as approved by Accepting Officer

S&F in repair 19mm thick commercial faced plywood grade BWR type B-B fixed with screws to timber frame work as in pelmet boxes, cup board outcall as directed by the Engr-in-Charge.(Make : Greenply/Kitply/Alishan) or equivalent as approved by Accepting Officer

S&F in repairs 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap as in roof, wall fixed with L-type or J- type or cracked hook bolts in lieu screw complete all as directed by the Engr-in-Charge

S&F in repairs brass hat and coat hooks, solid body, 175mm to 250mm.

S & F in repairs 450 mm long brass steel skeleton tower bolts with cast brass plate and staples and rolled or dwawn brass bolt.

S & F in repairs 600 mm long brass steel skeleton tower bolts with cast brass plate and staples and rolled or dwawn brass bolt.

S & F in repairs 300 mm long brass , sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fiing bolt with rolled or drawn brass bolts.

S&F Floor door stopper of brass body and tongue, anodised with hard drawn steel spring over all length of cover plate 140mm fixed in floor as in repair complete all as specified and as directed.

M&L mild steel rolled sections as in main and cross beams, angle, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors etc conforming to grade Fe-410- W (Gde- E- 250) quality- A made to required shape and size, welded at joints complete all as specified and directed.

S & F mild steel in framed work such as grills, gratings, etc. with ends of bars shouldered and /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed by Engineer-in-Charge.

S & F pre-painted color galvalume aluminium zinc coating GI based corrugated steel 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S & F pre-painted color galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges , valley gutter etc fixed with self tapping screws as specified.

S&F 0.56 mm thick plain aluminium sheeting alloy 31000 H4 as in ridges, hips, valley gutter, drip and straight flashing etc complete all as specified and as directed.

Supply and Fixing PVC solid wall lining consisting of 5 mm thick plain colour PVC sheet used inclusive of solvent cement and fixing at site on PVC frame as per manufacturer’s specification and instruction) directed by the Engineer-in-Charge.

Supply and Fixing PVC fillets of width 35 mm, made of 5 mm thick PVC sheet, for wall paneling inclusive of fixing as in grid / frame on wall at a distance .6m horizontal & vertical for wall lining/paneling as per specification of manufacturer and as directed by the Engineer-in-Charge.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement all as specified and directed.

S&F in repair Stainless Steel Sink Overall size 915mm x 460mm and Double Bowl size 410 mm x 355 mm x 165 mm for Kitchen or Laboratory with Plugs, Washers, Brass chromium plated Waste Fitting 32mm dia, PVC waste pipe, a Pair of Cast Iron Brackets duly Painted including Cutting and Pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including Taking down/out unserviceable Sink and connected Items, complete all as specified and as directed.

S&F cast type ,polished bright brass handles 100mm long complete all as directed by the Engineer-in-Charge.

S&F in repairs continuous (piano) hinges mild steel bright finish width of flap 30mm when opened complete all as directed by the Engineer-in-Charge.

S&F in repairs 4 levers brass body, lock ,drawer graded 1 size 50 mm, complete all as directed by the Engineer-in-Charge.

S&F in repairs aluminium 'E' channel for sliding drawer shutter of cub board in two way 300 mm long complete all as directed by the Engineer-in-Charge.

S&F in repairs 100 mm double action spring hinges ( Hydraulic hinges) brass with phosphor bronze wire spring , bright polished complete all as directed by the Engineer-in-Charge.

S&F Mono block water pressure pump set of capacity 0.50 HP single phase , discharge range 36-60 Lpm , working in voltage range 220-240 V with operating pressure range 1.4 -2.4 (Bar) complete including with closed discharge valve and connected fittings complete all as specified and as directed . Make: KILOSKAR - ETERNA, Model SJPBS 42420- HL or equivalent model as approved by the Accepting officer.

Removal of existing water proof treatment of any description including cement plaster carefully from the surfaces cleaning and scrubbing down with water complete all as specified and as directed.

M & L for Providing, cement concrete, Type B1, 1:2:4 ( 20mm aggregate) in roof kerbs or mud stops, padding, rounded or chamfered on edges on existing roof( with proper slope) including preparing of roof slab complete all as directed by Engineer - in - charge.

M&L rendering 10 mm thick screed bed on concrete surface in CM (1:4) & water proofing compound mixed with @ 3% finished fair and even. ( Note -W.P.C. shall be measured and paid separately.)

M & L for water proofing treatment on existing cleaned RCC roof with following specification and manufacturer Instruction complete all as specified as directed. (a) Applying bitumen primer confirming to IS-3384-1986 over the cleaned plaster surfaces as per IS-3067-1966. (b) Applying a layer of APP based polymeric membrane 3.0mm thick (minimum) weighing 3.0 Kilogram per sqm (reinforced with polyester non oven fabric weighing not less than 160 Gmss per sqm by torch application. The over laps shall be minimum 100mm on the transverse direction and 75 mm on longitudinal direction. (c) applying one coat of aluminium paint @ 0.10 Litre per Sqm Over APP based Polymeric membrane.

Supply only integral water proofing compound all as specified and as directed.

M & L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

M & L for Disconnecting existing water tanks capacity exc 250 ltr n exc 500 ltr , setting aside (or lowering if required) for cleaning, repairs, leaning, etc. and hoisting using cleaning agents (chemical compound) if required all as specified and directed.

M & L for Disconnecting existing water tanks capacity exc 500 ltr n exc 1000 ltr , setting aside (or lowering if required) for cleaning, repairs, leaning, etc. and hoisting using cleaning agents (chemical compound) if required all as specified and directed.

M & L for Disconnecting existing water tanks capacity exc 1000 ltr n exc2000 ltr , setting aside (or lowering if required) for cleaning, repairs, leaning, etc. and hoisting using cleaning agents (chemical compound) if required all as specified and directed.

Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.

PRABIR TRADERS (BID ID -3148966)

GOODWILL AND CO. (BID ID -3144859)

RAJ ENTERPRISE (BID ID -3149500)

DEEPAK KHATTAR (BID ID -3149497)

SOMANI BUILDERS (BID ID -3149454)

KWALITY CONSTRUCTION (BID ID -3144287)

MS AP CONSTRUTION AND CO (BID ID -3148478)