ELECTRICAL AMC RESIDENTIAL

Amount

Please note that Quoted rates are inclusive of taxes,labor, transportation, royaltie etc. Nothing Extra shall be paid separtely.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing Ceiling fan capacitor 2mfd - 2.5 mfd on the existing ceiling fan including connections etc. as required.

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 1 or 2 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 3 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 4 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 6 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 8 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 12 Module

Supplying and fixing following size/ modules, PVC box alongwith modular base & cover plate for modular switches in recess etc. as required. 4 module

Supplying and fixing following size/ modules, PVC box alongwith modular base & cover plate for modular switches in recess etc. as required. 6 module

Supplying and fixing following size/ modules, PVC box alongwith modular base & cover plate for modular switches in recess etc. as required. 8 module

Supplying and fixing following size/ modules, PVC box alongwith modular base & cover plate for modular switches in recess etc. as required. 12 module

Supply and installation of 11 W LED E 27 base , 230 V , bulb for table lamp.

Supply and installation of 15 W LED mirror fitting, length 2 ft, surface mounted as required.

Supplying LT cable having Aluminium conductor XLPE insulated sheathed,galvanised steel tape armoured cable with pvc outer sheathing 1.1 KV ( Confirming to IS 7098 Part-II amended upto date as per the following sizes). Including the cost of all materials, lobour, Handling of materials of equipment and machineries all lead lift, loading and unloading, transportation, if any other incidental charges at all level complete all as per specification and as directed by Engineer-in charge. 3.5 Core x 25 Sqmm Armoured Aluminium (A2XFY) Cable. (Approlved Make : Polycab / Finolex / RR Kabel )

Supplying LT cable having copper conductor XLPE insulated sheathed,galvanised steel tape armoured cable with pvc outer sheathing 1.1 KV ( Confirming to IS 7098 Part-II amended upto date as per the following sizes). Including the cost of all materials, lobour, Handling of materials of equipment and machineries all lead lift, loading and unloading, transportation, if any other incidental charges at all level complete all as per specification and as directed by Engineer-in charge. 4 Core x 16 Sqmm Armoured Copper Cable.

Supplying LT cable having copper conductor XLPE insulated sheathed,galvanised steel tape armoured cable with pvc outer sheathing 1.1 KV ( Confirming to IS 7098 Part-II amended upto date as per the following sizes). Including the cost of all materials, lobour, Handling of materials of equipment and machineries all lead lift, loading and unloading, transportation, if any other incidental charges at all level complete all as per specification and as directed by Engineer-in charge. 4 Core x 10 Sqmm Armoured Copper Cable. (Approlved Make : Polycab / Finolex / RR Kabel )

Supplying LT cable having copper conductor XLPE insulated sheathed,galvanised steel tape armoured cable with pvc outer sheathing 1.1 KV ( Confirming to IS 7098 Part-II amended upto date as per the following sizes). Including the cost of all materials, lobour, Handling of materials of equipment and machineries all lead lift, loading and unloading, transportation, if any other incidental charges at all level complete all as per specification and as directed by Engineer-in charge. 4 Core X 4 sqmm copper armoured cable

Supplying LT cable having copper conductor XLPE insulated sheathed,galvanised steel tape armoured cable with pvc outer sheathing 1.1 KV ( Confirming to IS 7098 Part-II amended upto date as per the following sizes). Including the cost of all materials, lobour, Handling of materials of equipment and machineries all lead lift, loading and unloading, transportation, if any other incidental charges at all level complete all as per specification and as directed by Engineer-in charge. 4 C X 2.5 sqmm copper armounred cable (Approlved Make : Polycab / Finolex / RR Kabel )

Supplying LT cable having copper conductor XLPE insulated sheathed,galvanised steel tape armoured cable with pvc outer sheathing 1.1 KV ( Confirming to IS 7098 Part-II amended upto date as per the following sizes). Including the cost of all materials, lobour, Handling of materials of equipment and machineries all lead lift, loading and unloading, transportation, if any other incidental charges at all level complete all as per specification and as directed by Engineer-in charge. 2 C X 1.0 sqmm copper aremounred cable

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sq. mm

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as reauired. Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Upto 35 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. . Upto 35 sq. mm

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Quoted rate shall be including GST , transportation , lead , lift , scaffolding etc complete. Nothing extra shall be paid separately.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. Quoted rate shall be including GST , transportation , lead , lift , scaffolding etc complete. Nothing extra shall be paid separately.

Core cutting in brickwork/RCC up to 300mm depth for 100 mm dia including cost packing of gap between pipe and with apropritae expoxy base filling etc complete and as per Direction of Engineer In-charge.

Core cutting in brickwork/RCC up to 300mm depth for 150 mm dia including cost packing of gap between pipe and with apropritae expoxy base filling etc complete and as per Direction of Engineer In-charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with GI clamps at 1.00 m spacing for good support to pipe . This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. External work - Exposed on wall. Quoted rate shall be including material , labour , transportation , lead , lift , MTA , FTA , Tee , solvent cement , make holes in wall and making it good , GST etc complete. Nothing extra shall be paid separately. Length of pipe laid at site shall be measured for payments. Approved Make : Finolex/Supreme/Astral/Watertec( 20 mm dia outer dia Pipes ) ( Approved Make : Astral / Ashirvad / Supreme / Prince / Finolex )

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with GI clamps at 1.00 m spacing for good support to pipe . This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. External work - Exposed on wall. Quoted rate shall be including material , labour , transportation , lead , lift , MTA , FTA , Tee , solvent cement , make holes in wall and making it good , GST etc complete. Nothing extra shall be paid separately. Length of pipe laid at site shall be measured for payments. Approved Make : Finolex/Supreme/Astral/Watertec( 15mm dia outer dia Pipes ) ( Approved Make : Astral / Ashirvad / Supreme / Prince / Finolex )

CPVC End caps for 25 mm dia outer dia Pipes ( Approved Make : Astral / Ashirvad / Supreme / Prince / Finolex )

CPVC End caps for 20 mm dia outer dia Pipes ( Approved Make : Astral / Ashirvad / Supreme / Prince / Finolex )

CPVC Reducing tee 25mm-15mm-25mm confirming ASTM D2846 ( Approved Make : Astral / Ashirvad / Supreme / Prince / Finolex )

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore ( Approved Make : Leader / Normex /RB / Zoloto /Sant/Lehry )

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore ( Approved Make : Leader / Normex /RB / Zoloto /Sant/Lehry )

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 15 mm nominal bore ( Approved Make : Leader / Normex /RB / Zoloto /Sant/Lehry )

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore Horizontal ( Approved Make : Leader / Normex /RB / Zoloto /Sant/Lehry )

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore Vertical ( Approved Make : Leader / Normex /RB / Zoloto /Sant/Lehry )

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 120 mm dia (OD-120 mm & ID-103 mm nominal)

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable ( Approved make : D link / Polycab / Legrand )

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 2 run of cable ( Approved make : D link / Polycab / Legrand )

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 3 run of cable ( Approved make : D link / Polycab / Legrand )

Supply and making end termination for UTP 4 pair CAT 6 LAN cable with required IO modules which is suitable for modular type base , cover plates and accessories ( At field side ) as required.Quoted rate shall be including material, labour, taxes, duties, lead, lift, loading, transportation, unloading, storing , scaffolding etc, making holes in walls , filling holes with mortar etc complete as per direction of Engineer In‐charge. Nothing extra shall be paid separately. ( Approved Make : MK / Legrand )

Supply and making end termination for UTP 4 pair CAT 6 LAN cable with required IO modules which is suitable for modular type base , cover plates and accessories ( At Rackside side ) as required.Quoted rate shall be including material, labour, taxes, duties, lead, lift, loading, transportation, unloading, storing , scaffolding etc, making holes in walls , filling holes with mortar etc complete as per direction of Engineer In‐charge. Nothing extra shall be paid separately. ( Approved Make : MK / Legrand / Netgear / D link )

Supply of 2 meter length cat 6 patch cord with Rj 45 terminations on both ends as complete. ( Approved Make : MK / Legrand / Netgear / D link )

Supply and installation of 48 port fully loaded patch panel with IO modules suitable for UTP CAT 6 cable and required mounting accessories for existing network rack.Quoted rate shall be including material, labour, taxes, duties, lead, lift, loading, transportation, unloading, storing , scaffolding etc, making holes in walls , filling holes with mortar etc complete as per direction of Engineer In‐ charge. Nothing extra shall be paid separately. ( Approved Make : MK / Legrand / Netgear / D link )

FINAL DISTRIBUTION BOARDS. PART - C - DB's & MCB's : Supply, Installation, Testing and Commissioning of all MCB Distribution Boards (10KA) 415V, made out of 16SWG MS sheet steel enclosure hinged MS cover/over flanged cover (double door) with cutouts for operating the MCB knobs and comprising of phase bus bars, neutrals and earth bus with tapped holes, bakelite phase barriers, pvc insulator shoes for incoming wire, etc complete. DB's shall be mounted by grouting in to the wall/angle to brick wall as required. DB's shall be suitable for Three Phase / single phase loads. Or DB's shall be mounted on suitable M.S. angle and supporting flat. DB's shall include termination lugs etc., all complete. (Note: Local fabrication not permitted. Only factory made boxes shall be installed and all MCB's shall be with 10 KA rating)Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required 8 way (4 + 24), Double door for RPDB ( Approved Make : Legrand / Schneider / L&T )

FINAL DISTRIBUTION BOARDS. PART - C - DB's & MCB's : Supply, Installation, Testing and Commissioning of all MCB Distribution Boards (10KA) 415V, made out of 16SWG MS sheet steel enclosure hinged MS cover/over flanged cover (double door) with cutouts for operating the MCB knobs and comprising of phase bus bars, neutrals and earth bus with tapped holes, bakelite phase barriers, pvc insulator shoes for incoming wire, etc complete. DB's shall be mounted by grouting in to the wall/angle to brick wall as required. DB's shall be suitable for Three Phase / single phase loads. Or DB's shall be mounted on suitable M.S. angle and supporting flat. DB's shall include termination lugs etc., all complete. (Note: Local fabrication not permitted. Only factory made boxes shall be installed and all MCB's shall be with 10 KA rating)Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required 4 way (4 + 18), Double door for UPS DB ( Approved Make : Legrand / Schneider / L&T )

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) * 8 way double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) * 12 way double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way (4 + 18), Double door ( Approved Make : Legrand / Schneider / L&T )

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way (4 + 12), Double door ( Approved Make : Legrand / Schneider / L&T )

Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc, as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Providing and fixing 25 mm X 5 mm G I strip on surface or in recess for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Providing and fixing 4.00 sq mm dia copper Green wire on surface or in recess for loop earthing as required. ( Approved make : Polycab / Finolex / RR kabel )

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut,bolt, spring, washer excavation and re-filling etc. as required.

Providing excavation and refilling of existing earthing pit GI / Copper with Charcoal 90 Kg , solt 10 kg each. Works includes cleaning of all GI/ Copper parts of earthing pit, replacement of connecting nutbolts with new SS nutbolts, replacement of water pipe GI having identical specifications with existing one, if required. Reconstruction of earthing chamber with 450 x 450 size CI cover. Earthing test report should be submitted by the agency as per format issued by IISER Pune. Before execution of work, prior approval from engineer in charge, IISER Pune is required. Work shall be executed as good workmenship.

Repairing and reconstruction of earthing chamber with CI 450 x 450 mm cover , as per instructions of Engineer in charge, IISER Pune

Supply, installation, testing and commissioning of Chemical earthing using electrode of size 70 mm minimum diameter, minimum 03 meter long and connected with 50x5 mm copper internal strip, material of conustruction COPPER, complete with existing excavation / bore, civil work for chamber, cast iron cover size 450 x 450 mm, with backfill compound as requred to fill earth pit up to mark. the earth resistance shall be as per IS 3043 ( Approved make : Yash earthing / True Power / Fast Electrode / Maxwell Earthing )

Providing boreing / drilling bore well of 150mm dia for casing / strainer pipe , by suitable method, including drilling in all strata, including hiring & running charges of all equipments, tools, plants and machinenaries required for the job, all complete as per direction of Engineer in charge.

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 31/2 X 400 sq. mm ( Approved make : Reachem / Mseal / 3M )

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 31/2 X 240 sq. mm ( Approved make : Reachem / Mseal / 3M )

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE Copper conductor cable of 1.1 KV grade as required. 4 X 10 sq. mm ( Approved make : Reachem / Mseal / 3M )

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE Copper conductor cable of 1.1 KV grade as required. 4 X 16 sq. mm ( Approved make : Reachem / Mseal / 3M )

END TERMINATION: Supply and installation of End termination of cables with compression brass cable glands, Al crimping type lugs should be used for Al cables and Cu lugs with soldering and ferrules for the following 1.1kv class Al./Cu. XLPE/PVC insulated using necessary crimping tool and all other accessories as required and Including the cost of all materials, lobour, Handling of Materials of equipment and machineries all lead lift, loading and unloading, transportation, if any other incidental charges at all level complete all as per specification and as directed by Engineer-in charge. 4 Core x 10 Sqmm Armoured Copper Cable. ( Approved make : Dowells / CI / Electrowerke )

END TERMINATION: Supply and installation of End termination of cables with compression brass cable glands, Al crimping type lugs should be used for Al cables and Cu lugs with soldering and ferrules for the following 1.1kv class Al./Cu. XLPE/PVC insulated using necessary crimping tool and all other accessories as required and Including the cost of all materials, lobour, Handling of Materials of equipment and machineries all lead lift, loading and unloading, transportation, if any other incidental charges at all level complete all as per specification and as directed by Engineer-in charge. 3.5 Core x 25 Sqmm Armoured Aluminium Cable.

END TERMINATION: Supply and installation of End termination of cables with compression brass cable glands, Al crimping type lugs should be used for Al cables and Cu lugs with soldering and ferrules for the following 1.1kv class Al./Cu. XLPE/PVC insulated using necessary crimping tool and all other accessories as required and Including the cost of all materials, lobour, Handling of Materials of equipment and machineries all lead lift, loading and unloading, transportation, if any other incidental charges at all level complete all as per specification and as directed by Engineer-in charge. 4 Core x 16 Sqmm Armoured Copper Cable. ( Approved make : Dowells / CI / Electrowerke )

END TERMINATION: Supply and installation of End termination of cables with compression brass cable glands, Al crimping type lugs should be used for Al cables and Cu lugs with soldering and ferrules for the following 1.1kv class Al./Cu. XLPE/PVC insulated using necessary crimping tool and all other accessories as required and Including the cost of all materials, lobour, Handling of Materials of equipment and machineries all lead lift, loading and unloading, transportation, if any other incidental charges at all level complete all as per specification and as directed by Engineer-in charge. 4 Core X 2.5 YWY Cu Armoured Cable ( Approved make : Dowells / CI / Electrowerke )

END TERMINATION: Supply and installation of End termination of cables with compression brass cable glands, Al crimping type lugs should be used for Al cables and Cu lugs with soldering and ferrules for the following 1.1kv class Al./Cu. XLPE/PVC insulated using necessary crimping tool and all other accessories as required and Including the cost of all materials, lobour, Handling of Materials of equipment and machineries all lead lift, loading and unloading, transportation, if any other incidental charges at all level complete all as per specification and as directed by Engineer-in charge. 4 Core X 4 sqmm Cu Armoured Cable

END TERMINATION: Supply and installation of End termination of cables with compression brass cable glands, Al crimping type lugs should be used for Al cables and Cu lugs with soldering and ferrules for the following 1.1kv class Al./Cu. XLPE/PVC insulated using necessary crimping tool and all other accessories as required and Including the cost of all materials, lobour, Handling of Materials of equipment and machineries all lead lift, loading and unloading, transportation, if any other incidental charges at all level complete all as per specification and as directed by Engineer-in charge. 2 Core X 1.0 YWY Cu Armoured Cable ( Approved make : Dowells / CI / Electrowerke )

Supplying and fixing exhaust fan of 1440 RPM of 305 mm (12") sweep with bracket blades complete for light duty of approved make. Louvers are required for each fan with 230V, single phase, 50 Hz. Including the cost of all materials, labour , HOM of equipment and machinerys all lead lift, loading and unloading, transportation, if any other incidental charges at all level complete all as per specification and as directed by Engineer-incharge. Frame for installation will be under civil scope of works. ( Approved make : Almonard / Bajaj / Crompton )

Supply of Ceiling fan 1200 mm sweep, aerodynamic design, complete set with condenser, stator, rotor, three blades , down rod, two caps , mounting hooks, nutbots, connectors etc. up to 60 W, 230 V AC. ( Approved make : Crompton / Bajaj / Usha )

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

Supplying and fixing exhaust fan of 1440 RPM of 300 mm (12") sweep with bracket blades complete for light duty of approved make. Louvers are required for each fan with 230V, single phase, 50 Hz. Including the cost of all materials, labour , HOM of equipment and machinerys all lead lift, loading and unloading, transportation, if any other incidental charges at all level complete all as per specification and as directed by Engineer-incharge. Frame for installation will be under civil scope of works. ( Approved make : Almonard / Bajaj / Crompton )

Supplying and fixing exhaust fan of 1440 RPM of 225 mm (9") sweep with bracket blades complete for light duty of approved make. Louvers are required for each fan with 230V, single phase, 50 Hz. Including the cost of all materials, labour , HOM of equipment and machinerys all lead lift, loading and unloading, transportation, if any other incidental charges at all level complete all as per specification and as directed by Engineer-incharge. Frame for installation will be under civil scope of works. ( Approved make : Almonard / Bajaj / Crompton )

Supply of wall mounted fan with 400 mm sweep, 50 W, oscillatioing movement, 3 step regulator, mounting arragement, hi flow air, 230 V AV, as complete. ( Approved make : Crompton / Bajaj / Usha )

Supply of pedestal fan with 400 mm sweep, 50 W, oscillatioing movement, 3 step regulator, mounting arragement, hi flow air, 230 V AV, as complete. ( Approved make : Crompton / Bajaj / Usha )

Supplying and fixing exhaust fan of 1440 RPM of 150 mm (6") sweep with bracket blades complete for light duty of approved make. Louvers are required for each fan with 230V, single phase, 50 Hz. Including the cost of all materials, labour , HOM of equipment and machinerys all lead lift, loading and unloading, transportation, if any other incidental charges at all level complete all as per specification and as directed by Engineer-incharge. Frame for installation will be under civil scope of works. ( Approved make : Almonard / Bajaj / Crompton )

Supplying and fixing exhaust fan of 1440 RPM of 450 mm (18") sweep with bracket blades complete for light duty of approved make. Louvers are required for each fan with 230V, single phase, 50 Hz. Including the cost of all materials, labour , HOM of equipment and machinerys all lead lift, loading and unloading, transportation, if any other incidental charges at all level complete all as per specification and as directed by Engineer-incharge. Frame for installation will be under civil scope of works. ( Approved make : Almonard / Bajaj / Crompton )

PVC RACEWAYS ( Along the wall) DLP U- PVC adaptable trunking : Supply & installation of surface mounted DLP U- PVC adaptable trunking raceways, fabricated out of U-PVC to Off-White or approved shade as per IS 733 of thickness 2.0mm for the base and sides with removable covers, complete with necessary bends, suitable sized junction boxes, internal angle, external angle, flat 90 degree angle , end caps and tees,minor civil works if any etc, Complete. (For every 1mtr distance cable tag has to be provided for each circuit in the raceways - as more that 1C FRLS copper wire is required for 1 Circuit) PVC RACEWAYS ( Along the wall), DLP U- PVC adaptable trunking . Size: 105x 50mm PVC Raceways for Power & Data with above specifications 105x 50mm PVC Raceways ( Approved make : MK Honeywell / Legrand )

Supplying and fixing following Modular socket on the existing raceways & PVC DLP truncking / face plate with required accessories to complete jobs. including connections, as required. . 6 Pin 15/16 amp socket outlet ( Approved make : MK Honeywell / Legrand )

Supplying and fixing following Modular switch / socket on the existing raceways & PVC DLP truncking / face plate with required accessories to complete jobs. including connections, as required including connections, as required. . 13 amp socket outlet ( Approved make : MK Honeywell / Legrand )

Supplying and fixing following Modular switch / socket on the existing raceways & PVC DLP truncking / faceplate with required accessories to complete jobs. including connections, as requiredincluding connections, as required. . 15/16 amp switch ( Approved make : MK Honeywell / Legrand )

Supplying and fixing following Modular switch / socket on the existing raceways & PVC DLP truncking / faceplate with required accessories to complete jobs. including connections, as requiredincluding connections, as required. . 05/06 amp Socket ( Approved make : MK Honeywell / Legrand )

Supplying and fixing following Modular switch / socket on the existing raceways & PVC DLP truncking with required accessories to complete jobs. including connections, as requiredincluding connections, as required. . 5/6 amp switch ( Approved make : MK Honeywell / Legrand )

Supplying and fixing following Modular switch / socket on the existing raceways & PVC DLP truncking / faceplate with required accessories to complete jobs. including connections, as required including connections, as required. . 6 Module Box with faceplate & cover ( Approved make : MK Honeywell / Legrand )

Supplying and fixing following Modular switch / socket on the existing raceways & PVC DLP truncking / faceplate with required accessories to complete jobs. including connections, as required including connections, as required. . 4 Module Box with faceplate & cover ( Approved make : MK Honeywell / Legrand )

Supplying and fixing following Modular switch / socket on the existing raceways & PVC DLP truncking / faceplate with required accessories to complete jobs. including connections, as required including connections, as required. . 1/2 Module Box with faceplate & cover

INDUSTRIAL POWER SOCKETS on wall : 32Amp, single phase : Supply and fixing 32A, 3 pin, Single phase, Industrial Socket with safety shutters controlled by One no. of 32A, double Pole MCB to be mounted on wall, ( The job includes cutting & chasing on exisiting wall, fixing the box in position as required including rough plastering.) As per IEC 61439-3. suitable for flush mounting and surface mounting. 3P+ P+E Five pole, IP 44, material of plug & socket polyamide 6. Including the cost of all materials, lobour , HOM of equipment and machinerys all lead lift, loading and unloading,transportation, if any other incidental charges at all level complete all as per specification and as directed by Engineer-incharge. MCB/PLUG/BOX -32A . Make:- ( Approved make : MK Honeywell / Legrand )

INDUSTRIAL POWER SOCKETS on wall : 32Amp, three phase : Supply and fixing 32A, 5 pin, three phase, Industrial Socket with safety shutters controlled by One no. of 32A, three Pole MCB to be mounted on wall, ( As per IEC 61439-3. suitable for flush mounting and surface mounting. 3P+ P+E Five pole, IP 44, material of plug & socket polyamide 6. The job includes cutting & chasing on exisiting wall, fixing the box in position as required including rough plastering.) Including the cost of all materials, lobour , HOM of equipment and machinerys all lead lift, loading and unloading,transportation, if any other incidental charges at all level complete all as per specification and as directed by Engineer-incharge. MCB/PLUG/BOX - 32A ( Approved make : MK Honeywell / Legrand )

Light Point Wiring : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A

Light Point Wiring : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B ( Approved make : Polycab / Finolex / RR Kabel )

Light Point Wiring : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C ( Approved make : Polycab / Finolex / RR Kabel )

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes ofFRLS PVC insulated copper conductor, single core cable in surface/ recessedmedium class PVC conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire ( Approved make : Polycab / Finolex / RR Kabel )

POWER SWITCHES / SOCKETS on walls - G.I. BOX. : Supplying and fixing following size / modules, GI box along with modular base and cover plate for modular switches in recess etc, as required. ( The job includes cutting & chasing existing wall, fixing the box in position as required including rough plastering.) (In all the rooms, vertical drops of conduits and switch boxes shall be concealed in the wall). Boxes should be of same make as that of modular accessories. :6 Module

POWER SWITCHES / SOCKETS on walls - G.I. BOX. : Supplying and fixing following size / modules, GI box along with modular base and cover plate for modular switches in recess etc, as required. ( The job includes cutting & chasing existing wall, fixing the box in position as required including rough plastering.) (In all the rooms, vertical drops of conduits and switch boxes shall be concealed in the wall). Boxes should be of same make as that of modular accessories. : 8 Module

LIGHT CIRCUIT WIRING : Wiring for circuit / submain wiring in concealed pipe below false ceiling (by chieseling the wall and covering with chicken mesh with rough plastering) / surface mounted. Including ISI mark PVC Conduit with 25mm DIa of 2mm thick with PVC insulated FRLS single core wires with colour code of following: 2 x 2.5 sqmm + 1 x2.5 sqmm earth wire. ( Approved make : Polycab / Finolex / RR Kabel )

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire ( Approved make : Polycab / Finolex / RR Kabel )

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire ( Approved make : Polycab / Finolex / RR Kabel )

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 4 sq. mm + 2 X 4 sq. mm earth wire ( Approved make : Polycab / Finolex / RR Kabel )

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. ( Approved make : MK Honeywell / Legrand )

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required 32mm dia conduit pipe (2mm) - ( Approved make : Precision / Diamond / Modi )

Supplying and fixing following size/ modules, PVC box alongwith modular base & cover plate for modular switches in recess etc. as required. 4 module ( Approved make : MK Honeywell / Legrand )

Supplying and fixing following size/ modules, PVC box alongwith modular base & cover plate for modular switches in recess etc. as required. 6 module ( Approved make : MK Honeywell / Legrand )

Supplying and fixing following size/ modules, PVC box alongwith modular base & cover plate for modular switches in recess etc. as required. 8 module ( Approved make : MK Honeywell / Legrand )

Supplying and fixing following size/ modules, PVC box alongwith modular base & cover plate for modular switches in recess etc. as required. 12 module ( Approved make : MK Honeywell / Legrand )

Supply and installation of 23 W LED E 27 base , 230 V , bulb for table lamp. ( Approved make : Wipro / Crompton / Philips )

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long, 50 mm dia, medium class etc. with 2 R of 3 m GI strip of 25x5 mm , charcoal / coke more than 90 kg and salt minimum 10 kg, plastering of chambers for both inner and outer side as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with 2 R of 3 m GI strip of 25x5 mm , charcoal / coke more than 90 kg and salt minimum 10 kg, plastering of chambers for both inner and outer side as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Supply of Recessed Mounted 2'X2' , 36 / 40 W LED Luminaire Light with Single piece molded Polycarbonate diffuser, Lighting and electrical parameters are inline with 2'X2' Luminaire. Luminaire should give more volumetric light & higher vertical illumination. Luminaire should be available in different Lumen Packs of 4000 lm with different CCT . LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) >=100 lumens/watt, Life of fixture 50000hrs@L70% Lumen maintenance, CCT up to 6500, CRI >80, PF >0.95 and SDCM 4 for good light quality, an operating Voltage Range of 140 - 270 V. Minimum Internal Surge Protection 2.5KV, The fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009, CISPR-15 for EMI. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Make Wipro / Crompton / Havell / Bajaj . Removing of existing light luminaires from site . ERECTION for Recessed Mounted 2'X2' , 36 / 40 W LED Luminaire incluilding ceiling hook, drop wires 3 R x 1.5 sqmm copper flex wire from ceiling point to fitting with full covered flex pipe, stray wire / cable for handing fitting on false ceiling or mouting on ceiling with surface box assembly etc as required and complete. Cutting in metal / false ceiling for required cut out is in scope of agency. ( Approved make : Wipro / Crompton / Philips )

Supply of Surface Mounted 2'X2' , 36 / 40 W LED Luminaire Light with Single piece molded Polycarbonate diffuser, Lighting and electrical parameters are inline with 2'X2' Luminaire. Luminaire should give more volumetric light & higher vertical illumination. Luminaire should be available in different Lumen Packs of 4000 lm with different CCT. LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) >=100 lumens/watt, Life of fixture 50000hrs@L70% Lumen maintenance, CCT up to 6500, CRI >80, PF >0.95 and SDCM 4 for good light quality, an operating Voltage Range of 140 - 270 V. Minimum Internal Surge Protection 2.5KV The fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009, CISPR-15 for EMI. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Make Wipro / Crompton / Havell / Bajaj. Removing of existing light luminaires from site . ERECTION for Surface Mounted 2'X2' , 36 / 40 W LED Luminaire incluilding ceiling hook, drop wires 3 R x 1.5 sqmm copper flex wire from ceiling point to fitting with full covered flex pipe, stray wire / cable for handing fitting on false ceiling or mouting on ceiling with surface box assembly etc as required and complete. Cutting in metal / false ceiling for required cut out is in scope of agency. ( Approved make : Wipro / Crompton / Philips )

Supply of Recessed Mounted 12 watt LED Luminaire round type dia 135 -165 mm cut out type with Intelligent Inner Edge Light with Single piece molded Polycarbonate diffuser, . Luminaire should give more volumetric light & higher vertical illumination.Luminaire should be available in different Lumen Packs of 1200 lm with different CCT. LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) >=100lumens/watt, Life of fixture 50000hrs@L70% Lumen maintenance, CCT up to 6500, CRI >80, PF >0.95 and SDCM 4 for good light quality, an operating Voltage Range of 140 - 270 V.Minimum Internal Surge Protection 2.5KV The fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009, CISPR-15 for EMI. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters Make Wipro / Crompton / Havell / Bajaj / syska. Removing of existing light luminaires from site . ERECTION for Recessed Mounted 12 watt LED Luminaire round dia up to 165 mm cut out type incluilding ceiling hook, drop wires 3 R x 1.5 sqmm copper flex wire from ceiling point to fitting with full covered flex pipe, stray wire / cable for handing fitting on false ceiling or mouting on ceiling with surface box assembly etc as required and complete. Cutting in metal / false ceiling for required cut out is in scope of agency. ( Approved make : Wipro / Crompton / Philips )

Supply of Recessed Mounted 12 watt LED Luminaire Square type 1' x 1' size , cut out type with Intelligent Inner Edge Light with Single piece molded Polycarbonate diffuser, . Luminaire should give more volumetric light & higher vertical illumination.Luminaire should be available in different Lumen Packs of 1200 lm with different CCT. LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) >=100lumens/watt, Life of fixture 50000hrs@L70% Lumen maintenance, CCT up to 6500, CRI >80, PF >0.95 and SDCM 4 for good light quality, an operating Voltage Range of 140 - 270 V.Minimum Internal Surge Protection 2.5KV The fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009, CISPR-15 for EMI. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters Make Wipro / Crompton / Havell / Bajaj / syska. Removing of existing light luminaires from site . ERECTION for Recessed Mounted 12 watt LED Luminaire Square type 1' x 1' size, cut out type incluilding ceiling hook, drop wires 3 R x 1.5 sqmm copper flex wire from ceiling point to fitting with full covered flex pipe, stray wire / cable for handing fitting on false ceiling or mouting on ceiling with surface box assembly etc as required and complete. Cutting in metal / false ceiling for required cut out is in scope of agency. ( Approved make : Wipro / Crompton / Philips )

Supply of Surface Mounted 12 watt LED Luminaire round dia 135 -165 mm cut out type with Intelligent Inner Edge Light with Single piece molded Polycarbonate diffuser, Lighting and electrical parameters are inline with 1'X1' Luminaire. Luminaire should give more volumetric light & higher vertical illumination.Luminaire should be available in different Lumen Packs of 1200 lm with different CCT. LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) >=100lumens/watt, Life of fixture 50000hrs@L70% Lumen maintenance, CCT up to 6500, CRI >80, PF >0.95 and SDCM 4 for good light quality, an operating Voltage Range of 140 - 270 V.Minimum Internal Surge Protection 2.5KV The fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009, CISPR-15 for EMI. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters Make Wipro / Crompton / Havell / Bajaj / syska. Removing of existing light luminaires from site . ERECTION for Surface Mounted 12 watt LED Luminaire round dia up to 165 mm cut out type incluilding ceiling hook, drop wires 3 R x 1.5 sqmm copper flex wire from ceiling point to fitting with full covered flex pipe, stray wire / cable for handing fitting on false ceiling or mouting on ceiling with surface box assembly etc as required and complete. Cutting in metal / false ceiling for required cut out is in scope of agency. ( Approved make : Wipro / Crompton / Philips )

Supply of Surface Mounted 24 watt LED Luminaire square type , 1' x 1' , cut out type with Intelligent Inner Edge Light with Single piece molded Polycarbonate diffuser, Lighting and electrical parameters are inline with 1'X1' Luminaire. Luminaire should give more volumetric light & higher vertical illumination.Luminaire should be available in different Lumen Packs of 2400 lm with different CCT. LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) >=100lumens/watt, Life of fixture 50000hrs@L70% Lumen maintenance, CCT up to 6500, CRI >80, PF >0.95 and SDCM 4 for good light quality, an operating Voltage Range of 140 - 270 V.Minimum Internal Surge Protection 2.5KV The fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009, CISPR-15 for EMI. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters Make Wipro / Crompton / Havell / Bajaj / syska. Removing of existing light luminaires from site . ERECTION for Surface Mounted 24 watt LED Luminaire Square type , 1' x 1' , cut out type incluilding ceiling hook, drop wires 3 R x 1.5 sqmm copper flex wire from ceiling point to fitting with full covered flex pipe, stray wire / cable for handing fitting on false ceiling or mouting on ceiling with surface box assembly etc as required and complete. Cutting in metal / false ceiling for required cut out is in scope of agency. ( Approved make : Wipro / Crompton / Philips )

Supply surface mounted 20W LED batten type fitting complete with all accessories Including the cost of all materials, labour, HOM of equipment and machinerys all lead, lift, loading and unloading, transportation, if any other incidental charges at all level complete all as per specification and as directed by Engineer-incharge. The fitting shall be green as per ECBC norms. .Make Wipro / Crompton / Havell / Bajaj. Removing of existing light luminaires from site . ERECTION for surface mounted 20W LED batten type fitting incluilding ceiling hook, drop wires 3 R x 1.5 sqmm copper flex wire from ceiling point to fitting with full covered flex pipe, stray wire / cable for handing fitting on false ceiling or mouting on ceiling with surface box assembly etc as required and complete. Cutting in metal / false ceiling for required cut out is in scope of agency. ( Approved make : Wipro / Crompton / Philips )

Supply of recess mounted 9 watt 5" LED Recessed Downlighter with a nominal system lumen output of 600 lumens and a minimum system efficacy of 110 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire should have a color temperature of 6500K and CRI>80. The luminaire shall meet IP20 rating with THD<10% and PF > 0.95 and 2.5KV surge protection. The luminaire housing should made of pressure die cast aluminium and the luminaire optics shall have a high efficiency diffuser with more than 85% transmittance. The total power consumption should not exceed 5.5W (including driver).The fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007. Make Wipro / Crompton / Havell / Bajaj. Removing of existing light luminaires from site . ERECTION for recess mounted 9 watt 5" LED Recessed Downlighter incluilding ceiling hook, drop wires 3 R x 1.5 sqmm copper flex wire from ceiling point to fitting with full covered flex pipe, stray wire / cable for handing fitting on false ceiling or mouting on ceiling with surface box assembly etc as required and complete. Cutting in metal / false ceiling for required cut out is in scope of agency. ( Approved make : Wipro / Crompton / Philips )

Supply and fixing of surface mounted / wall mounted , 12 to 18 W LED mirror fitting, length 2 ft, surface mounted, cool day light of based luminaire for surface mounting on ceiling with module, luminaire complete with lamp and all accessories. Including the cost of all materials, labour, HOM of equivalent and machineries all lead lift, loading and unloading, transportation, if any other incidental charges at all level complete all as per specification & as directed by Engineer in charge. ( Approved make : Wipro / Crompton / Philips )

Supply and fixing of surface mounted / wall mounted , 2 ft , 10 W LED light fitting, cool day light of based luminaire for surface mounting on ceiling with module, luminaire complete with lamp and all accessories. Including the cost of all materials, labour, HOM of equivalent and machineries all lead lift, loading and unloading, transportation, if any other incidental charges at all level complete all as per specification & as directed by Engineer in charge. ( Make Syska / Wipro / Philips / Bajaj / Crompton / Havells )

Supplying fixing and wiring Current Operated RCBOs,240V/415V 50Hz with 10KA short circuit with standing capacity 25amps. double pole, 30/100mA, and Including the cost of all materials, lobour, HANDLING OF MATERIALS of equipment and machinery all lead lift, loading etc, complete.RCBO 63 A, 4P, 100 mA . ( Approved make : MK Honeywell / Legrand / Schindler )

Supplying fixing and wiring Current Operated RCBOs,240V/415V 50Hz with 10KA short circuit with standing capacity 25amps. double pole, 30/100mA, and Including the cost of all materials, lobour, HANDLING OF MATERIALS of equipment and machinery all lead lift, loading etc, complete.RCBO 32/40 A 4P, 100 mA ( Approved make : MK Honeywell / Legrand / Schindler )

Supplying fixing and wiring Current Operated RCBOs,240V/415V 50Hz with 10KA short circuit with standing capacity 25amps. double pole, 30/100mA, and Including the cost of all materials, lobour, HANDLING OF MATERIALS of equipment and machinery all lead lift, loading etc, complete.RCBO 32/40A, DP, 30mA ( Approved make : MK Honeywell / Legrand / Schindler )

Supplying and fixing, MCB on existing MCB distribution boards using necessary fixing materials and wiring complete as required and Including the cost of all materials, lobour , HANDLING OF MATERIALS of equipment and machineries all lead lift, loading etc, complete 32/40 A TPN MCB ( Approved make : MK Honeywell / Legrand / Schindler )

Supplying and fixing, MCB on existing MCB distribution boards using necessary fixing materials and wiring complete as required and Including the cost of all materials, lobour , HANDLING OF MATERIALS of equipment and machineries all lead lift, loading etc, complete 32 A TP MCB ( Approved make : MK Honeywell / Legrand / Schindler )

Supplying and fixing, MCB on existing MCB distribution boards using necessary fixing materials and wiring complete as required and Including the cost of all materials, lobour , HANDLING OF MATERIALS of equipment and machineries all lead lift, loading etc, complete 16 / 20A, SP, MCB - 'C' CURVE for RP & UPS DB's ( Approved make : MK Honeywell / Legrand / Schindler )

Supplying and fixing, MCB on existing MCB distribution boards using necessary fixing materials and wiring complete as required and Including the cost of all materials, lobour , HANDLING OF MATERIALS of equipment and machineries all lead lift, loading etc, complete 10A, SP, MCB - 'B' CURVE- for LDB & ELDB ( Approved make : MK Honeywell / Legrand / Schindler )

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required. ( Approved make : MK Honeywell / Legrand / Schindler )

Supplying and fixing TPN sheet steel enclosure on surface/ recess without MCB complete with connections, testing and commissioning etc. as required. ( Approved make : MK Honeywell / Legrand / Schindler )

Supplying,installation,testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights / indoor lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required. 2 output per phase and suitable for single phase supply

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. ( Dismanted material should be handed over to IISER Pune ) Group C ( Approved make : Polycab / Finolex / RR Kebal )

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shilded with fine tinned copper braid and protected with PVC shealth in the existing surface / recessed steel/PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required 40 MM ( Approved make : Precision / Diamond / Modi )

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required 25 MM ( Approved make : Precision / Diamond / Modi )

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

FIBER OPTIC CABLE & COMPONENTS Supply, Installation, Testing & Commissioning and Laying of fiber optic cable of various capacities to be laid in prelaid conduits/RCC hume pipes/HDPE/DWC/cable trays as applicable. It shall be as per technical specifications with all the necessary mounting accessories as required for complete installation. 6 cores OS2 Singlemode armoured fiber cable, uni-tube, high density polyethylene outer jacket ( Approved make : Polycab / Finolex / D link )

Supply, Installation, Testing & Commissioning of rack mounting type fiber shelf of various capacities for assembly/termination of fiber optic cable for LC style components, for optical splicing and provision for storage of pigtails and splices, equipped with adaptors, adaptor plates and any other such all necessary hardware for proper dressing and management of fiber optic cable. Any blank adaptor positions must be suitably masked for restricting dust entry. Adequate splice trays shall be provided for proper management of splices for required number of cores at every LIU. It shall be as per technical specifications with all the necessary mounting accessories as required for complete installation.For 6 cores, Singlemode LC termination ( Approved make : D link / Netgear / Valrack )

Splicing / Termination of Fiber Optic Cable Cores using Fusion splicing with pre-terminated LC pigtails, dressing and proper fixing in splice trays. Including Splicing Kit.

NETWORKING ENCLOSURES Supply, Installation, Testing & Commissioning of 19" wide mounting frame Networking Enclosures of various sizes and capacities complete with cable manager & all accessories. It shall be as per technical specifications with all the necessary mounting accessories as required for complete installation. 09 U, 600 mmW x 600 mmD, wall mounted, 4 x 90cfm fans ( Approved make : D link / velrack / Netgear )

NETWORKING ENCLOSURES Supply, Installation, Testing & Commissioning of 19" wide mounting frame Networking Enclosures of various sizes and capacities complete with cable manager & all accessories. It shall be as per technical specifications with all the necessary mounting accessories as required for complete installation. 12U, 600 mmW x 600 mmD, wall mounted, 4 x 90cfm fans ( Approved make : D link / velrack / Netgear )

Supply, installation, testing and commissioning of thermostat 11'' long suitable for 3KW 1.25'' BSP TP 18'' long water Heater in existing heater. ( Approved make : Hotmax / Bharat )

Supply, installation, testing and commissioning of 3KW water Heater 1.25'' BSP TP 18'' long . With required GI barrel pipe of up to 65 mm dia & 300 mm long having tapping etc as complete. ( Approved Make : Hotmax / Bharat )

Supply, installation, testing and commissioning of Start-Stop switching station having following specification. Specifications a ) Standard Start Push button with NO contact B) Standard Stop Push button with NC contact c) Emergency stop push button with Mashrrom head, self holding mechanism, Red top and yellow base, d ) PVC enclosure box with termination entry on each wall which is suitable for PVC / SS gland , Size of enclouser box 150 mm ( W ) x 100 mm ( H ) x 50 mm ( D) minimum. , wall mounting / surface mounting. e ) all Switches, Push buttons and enclosure boxes should be clearly labeled as per site requirement and colour code for each should be followed. Approval for sample component , arragement, GA etc are required from IISER Pune authorities.

Supply of 6 core x 1.5 sqmm , copper conductor, armoured cable, 1.1 KV grade, FRLS cable , Make Polycab / finolex / RR. ( For fume hood / fresh air system of OG starter feeder to Push button station )

Laying of one number PVC insulated PVC sheated /XLPE power cable of 1.1 kv grade of following in the existing open duct/cable tray / on surafce as requied :- Upto 35 Sq mm Quoted rates shall be including all taxes,duties,royalties,lead,lift,transpotation,GST etc complete.Nothing shall be payable separtely. Work shall be executed as per direction of engineer in charge,IISER Pune. Actual cable laid at site shall be measured for payments.

Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 6 Core x 1.5 Sqmm Armoured Copper Cable.

Real Electricals