Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.8 LAccepted-AOC | ₹20.8 L Quoted ₹21.4 L | L1 | Accepted-AOC Being L1 |
| 2 | L2₹22.6 LRejected-Finance | ₹22.6 L | L2 | Rejected-Finance Other than L1 |
| 3 | L3₹23.5 LRejected-Finance | ₹23.5 L | L3 | Rejected-Finance Other than L1 |
| 4 | L4₹23.7 LRejected-Finance | ₹23.7 L | L4 | Rejected-Finance Other than L1 |
| 5 | L5₹25.9 LRejected-Finance | ₹25.9 L | L5 | Rejected-Finance Other than L1 |
| Sl No | Description | Qty | Unit | sheetal engineering L2 | M/S MG GROUP L1 | shiva enterprises L8 | Ashish Sehgal and Co. L3 | shakti construction L5 | Gaurav India Corporations L6 | J S CONSTRUCTION CO L7 | Laxmi traders L4 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. | 323 | Sqm | 5 ₹1,615 | 2 ₹646 | 11 ₹3,553 | 10 ₹3,230 | 10 ₹3,230 | 11 ₹3,553 | 14 ₹4,522 | 10 ₹3,230 |
| 2.00 | Demolition of cement concrete (Unreinforced) in ground floor and paving n exc 15 cm thick blow or above ground level complete all as specified and directed. | 28.27 | Cum | 5 ₹141.35 | 50 ₹1,413.50 | 55 ₹1,554.85 | 10 ₹282.70 | 50 ₹1,413.50 | 88 ₹2,487.76 | 101 ₹2,855.27 | 100 ₹2,827 |
| 3.00 | M&L 25mm thick Cement concrete type B-0,1:2:4 (using 12.5mm graded stone aggregate) as levelling course complete all as specified and directed. | 120 | Sqm | 70 ₹8,400 | 40 ₹4,800 | 120 ₹14,400 | 100 ₹12,000 | 80 ₹9,600 | 125 ₹15,000 | 95 ₹11,400 | 75 ₹9,000 |
| 4.00 | M&L 75 mm thick PCC 1:3:6 Type C-2 (using 40 mm graded stone aggregate) as in sub-floor, sub-base, floor and pavings, etc. complete all as specified and directed. | 395 | Sqm | 65 ₹25,675 | 60 ₹23,700 | 155 ₹61,225 | 20 ₹7,900 | 175 ₹69,125 | 171 ₹67,545 | 170 ₹67,150 | 200 ₹79,000 |
| 5.00 | S&F Virified Ceramic tiles (Light Shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles15mm thick screed bed or bedding layer CM 1:6 for laying finishes,complete all as specified as directed | 95 | Sqm | 400 ₹38,000 | 575 ₹54,625 | 999 ₹94,905 | 500 ₹47,500 | 500 ₹47,500 | 890 ₹84,550 | 800 ₹76,000 | 490 ₹46,550 |
| 6.00 | S&F Virified Ceramic tiles (Dark Shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles15mm thick screed bed or bedding layer CM 1:6 for laying finishes,complete all as specified as directed | 25 | Sqm | 400 ₹10,000 | 575 ₹14,375 | 999 ₹24,975 | 500 ₹12,500 | 500 ₹12,500 | 890 ₹22,250 | 800 ₹20,000 | 490 ₹12,250 |
| 7.00 | S&F Virified Ceramic tiles (Light Shade/Dark Shade) 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles15mm thick screed bed or bedding layer CM 1:6 for laying finishes,complete all as specified as directed | 35 | Sqm | 400 ₹14,000 | 575 ₹20,125 | 1,200 ₹42,000 | 800 ₹28,000 | 500 ₹17,500 | 890 ₹31,150 | 850 ₹29,750 | 490 ₹17,150 |
| 8.00 | M&L Non Skid joints free ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed | 45 | Sqm | 550 ₹24,750 | 380 ₹17,100 | 900 ₹40,500 | 350 ₹15,750 | 500 ₹22,500 | 690 ₹31,050 | 700 ₹31,500 | 490 ₹22,050 |
| 9.00 | M&L Non Skid joints free ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed | 28 | Sqm | 500 ₹14,000 | 380 ₹10,640 | 900 ₹25,200 | 300 ₹8,400 | 500 ₹14,000 | 690 ₹19,320 | 700 ₹19,600 | 490 ₹13,720 |
| 10.00 | M&L Colored glazed ceramic coloured tiles in verticale surfaces 450mmx350mmx 7 mm/600x1200x7 to 8mm thick set over and incl 10mm thick backing coat in CM 1:4 and jointed in neat cement slurry and pointed in white or colored cement to match complete all as specified and directed. | 95 | Sqm | 400 ₹38,000 | 380 ₹36,100 | 999 ₹94,905 | 350 ₹33,250 | 500 ₹47,500 | 700 ₹66,500 | 800 ₹76,000 | 490 ₹46,550 |
Updated dates
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
23 Feb 2026, 6:00 pmClosed
GE (AF) SUBROTO PARK
GE (AF) Subroto Park, Delhi Cantt Delhi-110010
As described in Bill of quantities
2026_MES_750140_1
GE/SP/TOKEN-78/2025-26
Open Tender
Civil Works
180 days
GE (AF) SUBROTO PARK
As per NIT and tender documents
9 documents required · 9 mandatory
₹500
GE (AF) SUBROTO PARK
₹90,000
Yes
30 May 2026
27 Jan 2026
26 Feb 2026
27 Jan 2026
23 Feb 2026
11 Feb 2026
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Demolition of cement concrete (Unreinforced) in ground floor and paving n exc 15 cm thick blow or above ground level complete all as specified and directed.
M&L 25mm thick Cement concrete type B-0,1:2:4 (using 12.5mm graded stone aggregate) as levelling course complete all as specified and directed.
M&L 75 mm thick PCC 1:3:6 Type C-2 (using 40 mm graded stone aggregate) as in sub-floor, sub-base, floor and pavings, etc. complete all as specified and directed.
S&F Virified Ceramic tiles (Light Shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles15mm thick screed bed or bedding layer CM 1:6 for laying finishes,complete all as specified as directed
S&F Virified Ceramic tiles (Dark Shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles15mm thick screed bed or bedding layer CM 1:6 for laying finishes,complete all as specified as directed
S&F Virified Ceramic tiles (Light Shade/Dark Shade) 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles15mm thick screed bed or bedding layer CM 1:6 for laying finishes,complete all as specified as directed
M&L Non Skid joints free ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed
M&L Non Skid joints free ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed
M&L Colored glazed ceramic coloured tiles in verticale surfaces 450mmx350mmx 7 mm/600x1200x7 to 8mm thick set over and incl 10mm thick backing coat in CM 1:4 and jointed in neat cement slurry and pointed in white or colored cement to match complete all as specified and directed.
M&L Machine cut kota stone slab flooring 20-25mm thick over 20mm thick cement screed base of CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick cement screed base of CM 1:4 and jointed with grey slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L 20MM thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including point ing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite complete all as specified and directed
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block of any shape and size confoirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.
M&L PCC 1:2:4 type B-0 (using 20 mm gardded stone aggregate) as in copings including necessary form work, complete all as specified and directed.
M&L coloured chequered cement concrete tiles glossy finished 30cm x 30cm x 25 mm thick, with grey cement & pigments set, jointed and pointed in neat cement slurry in floors including 15 mm thick screed bed in cement mortar (1:6) and laying floor finishes complete all as specified and directed
M&L for preparation of old floor surfaces such as chequered tiles or interlocking pavers etc. by steel wire brushing, scrapping down smoke soot, mounds, moss and efflorescent salts and trading oil and greasy spots and washing, rubbing down with water and apply two coats of FLOOR GUARD APEX WATER BASED ACRYLIC EMULSION paint by roller brush/Spray / Aerosol Spraying machine complete all as specified and as directed
Taking down cement plaster of any description on brick walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed
M&L Rendering 15 mm thick in cement plaster 1:4 using without including liquid water proofing compound as per manufacturer's instructions on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L Rendering 10 mm thick in cement plaster 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed
M&L Rendering 5 mm thick in cement plaster 1:3 on fair faces of brick work or concrete surfaces of ceiling finished even and smooth without using extra cement complete all as specified and directed
M&L for Preparation of new surfaces of wall and applying two coats of cement base paint over one coat of alkali resistant priming paint complete all as specified and directed.
M&L preparation of new surfaces of wall and applying two coats of oil bound distamper emulsion over 1 mm thick wall care putty complete all as specified and directed.
M&L preparation of new surfaces of ceiling and applying two coats of oil bound distamper emulsion over 1 mm thick wall care putty complete all as specified and directed.
Material and labour for complete removal of existing treatment (any layers of existing treatment) from walls/pillars/cornices by scraping down with using steel patti and mechanical sander machine (including provision of dust sucking) upto entire satisfaction of Engineer-in-charge, brooming and washing down with water including applying white cement based putty where required for filling to depressions to make the surface even and smooth by using sander machine (with provision of dust sucking) upto entire satisfaction of Engineer-in-charge, after preparing the surfacesapplying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm
S&F in repair 15mm bore bib tap standard or PTMT colour high pressure screwed for iron pipe and fixed (min wt 15mm-90 gms/20mm-125 gms) Complete all as specified & directed.
S & F in repairs 15 mm bore Stop valves (concealed type) fancy type, cast copper alloy chromium plated with long shank and cup complete all as specified and directed.
S&F in repairs Stop valves/Angle valve 15 mm bore fancy type, CP, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.
S&F in repairs CP Bib taps 15 mm bore long body, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule fancy type, complete all as specified and directed.
S & F in repairs Health faucet(ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook Including making connections and fixed in position complete all as specified and directed.
S&F in repairs fancy type CP cast copper alloy pillar tap single leaver basin mixer without popup waste system with 450 mm long braided hoses cat No DRC-37011B make Jaquar or equivalent of any colour for basin 15 mm dia screwed down high pressure with long screwed shank sand fly nuts screwed for iron pipe fixed as in repairs. complete all as specified and directed
S&F in repairs Fancy type single leaver wall mixer cast copper alloy with provision of hand shower, but without hand shower , 15mm chromium plated screwed down for iron pipes or brass ferrule complete all as specified and directed
S&F in repair 5 mm thick glass corner with 12" dia with steel railing and fixed with CP screw & cup washer on wall complete all as specified and directed
S&F in repairs Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long.
S&F in repairs PVC cabinet mirror complete all as specified and as directed
S&F in repair plastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and as directed
S & F in repair wash hand basins, vitreous china flat back of size 630 mm X 450 mm including cutting for and pinning in ends of brackets or erecting stand including brackets duly painted, etc complete all as specified and directed
S&F in repairs vitreous counter sunk wash basins, size 550mmx400mmx250mm white including 32mm brass waste fittings, chromium plated with long screwed shanks & fly-nuts, flange fixed on granite slab/platform complete all as specified and directed.
Supply and fix in repair counter top oval shape any coloured wash hand basin of size 48cmx48cm depth 13cm Cat part of Jaquar or Equivalent in cera, hindware complete all as specified and directed.
S&F in repairs Vitreous China wash down water colset (Squat pattern) white complete as fixed in repair excluding flushing cistern and flush pipe "Orissa" pattern size 580x440 with integral footrest inject connection to trap antisyphonage etc complete incl joint between flushing pipe and coket of WC.
S & F Vitreous Ware wash down water closet (Pedestal), white (EWC) and fixed in repairs including seat cover with brass screws and excluding flush pipe and flushing cystren complete all as specified and directed.
S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160 mm complete all as specified and directed.
S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S & F in repairs PVC Low level flushing cistren 10 Ltr capacety including all itting such as flush pipe brackets complete all as specified and directed.
S&F in repair brass chromium plated waste coupling 40mm bore omplete all as specified and as directed.
S&F in repair brass chromium plated waste coupling 32mm bore complete all as specified and as directed.
S&F in repairs 32mm bore and 75cm long PVC flexible waste pipe for WHB complete all as specified and as directed.
S&F in repairs PVC sheet cover for One pieces EWC soft closing type complete all as specified and as directed
S & F in repair brass CP mixture with swivel spout for kichen hot and cold water screwed for 15mm bore iron pipe and fixed complete all as specified and as directed Make cat part No Kitchen Sink Mixer SOL-6309 of Jaguar
S & F in repair brass CP mixture 2 way for hot and cold water screwed for 15mm bore iron pipe and fixed complete all as specified and as directed. Make cat part No COP-119PM of Jaguar
S & F in repair brass (spindle) for mixture/Bib tap /concealled stop cock for iron pipe 15mm bore fixed complete all as specified and as directed.
S&F in repair two in one angle valve screwed for 15mm bore CP brass fixed to iron pipe complete all as specified and as directed Make cat part No SQT-526AKN of Jaguar.
S&F in repair Towel Ring fixed with and including Chromium plated brass , screws and wooden/plastic cleats etc complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs stainless steel rack for kitchen utensil made out of 22 gauge sheet & overall size 900mm x 750mm fixed to wall with screws complete all as specified and directed.
S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed
S & F in repair 25mm dia MS powder coated drapery rod including all necessary fixing arrangement like clamps, end brackets, end to end bracket complete all as directed and specified.
S & F in repair 25mm dia Stain less steel 206 grade drapery rod in gloss finish including all necessary fixing arrangement like clamps, end brackets, end to end bracket complete all as directed and specified.
Excavation in hard/dense soil for post holes or similar holes each n. exc. 0.5Cum getting out returning filling and ramming earth or broken rabble mixed with earth around in layer n. exc. 25cm complete all as specified and directed.
M & L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation etc complete all as specified and directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc.
S&F Roof trusses (framed), post, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Complete all as specified and directed
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161 1979 grade St.-240 complete all as specified and directed
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed
M&L, for preparation of old painted of wood and wooden base materials surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer to match the existing surfaces complete all as specifed and directed.
M&L preparation of new or previously untreated steel surfaces and applying two coats of synthetic enamel paint over a cot of red oxide primer complete all as specified and directed
M&L Preperation of old painted steel surface of any description, and applying a coat of synthetic enamal paint over 10cm in width or girth, not otherwise described complete all as specified and directed.
Dismantling of CGI/PGI Sheet fixed with screws as in roof covering complete all as specified and directed.
M&L Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet .50 mm lthick of an colour having tensile strength of 550 Mpa as in roof covering/ Clading to wall, fixed with self tapping screws as specified complete all as specified and directed.
Taking down wooden frame not exceeding 1.5 Sqm each (Without taking off shutters from the frames) complete all as specified and directed.
Taking down chowkhats or frame exceeding 1.5 Sqm and not exceeding 4.00 Sqm each (Without taking off shutters from the frames) complete all as specifed and directed.
Taking down Shutters of any description n exc 1 sq. m each complete all as specifed and directed.
Taking down Shutters of any description exc 1 sq. M and n exc 2 sq. M each complete all as specifed and directed.
S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
S&F of solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube as per specification and drawing given in clause 8.B.3 of SSR -2010 (Part-II Rates) complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (stiles) consisting of frame made out of mild steel tubes for top & bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and botttom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement fixing in the frame at site as per specification ,drawing complete all as specified and directed
S&f 30 mm thick Glazed and skeleton windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b) as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats complete all as specifed and directed.
S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc.(with out sash bars),edges of framing plain,chamfered or rounded.fitted with cut and mitred beads for securing glass,etc,sizes of members of shutters as specified in SSR part-I, section 8,clause 8.24 (a); supplied and fitted to chowkats but devided in to squares, with plain, chamfered or rounded ,mitred and rebated sash bars,any numbers complete all as specified and directed
S&F 30 mm thick 2nd class HW plain, framed, factory made panelled shutters (any number of pannel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), cleaned seasoned and chemically pressure treated complete all as specified and directed.
S&F Factory made flush shutters 30 mm thick, ISI marked, solid core construction, with block board core and plywood face panels, commercial type on both faces, complete all as specified and directed.
S&F Anodised aluminium poweder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F Anodised aluminium (powder coating of any colour (Thickness or powder coating not less than 50 micron) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified
S&F Anodised aluminium (powder coating of any colour (Thickness or powder coating not less than 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed
Supply and fix in repair for toughened glass of 12 mm thick of any colour as directed by GE as in doors, partitions, windows, bathing cubical with sliding door etc with Kolf SAFEX or OZONE fittings accessories like handle, door machine and all necessary required accessories/fitting for fixing complete, all as specified and directed by Engineer-in-Charge.
M&L for pre-laminted 9mm thick particle board interior grade prelaminted one side with decorative choice lamination & other side balancing white lamination fixed with screw to timber framework or fixed in ceiling complete all as specified and directed.
S&F in repairs aluminium extruded section body door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701to 850 mm in width and of weight between 36 to 60 kg and fixed
S&F 100 mm long medium weight, cold rolled mild steel Butt hinges complete all as specifed and directed.
S&F 75 mm long medium weight, cold rolled mild steel Butt hinges complete all as specifed and directed.
S&F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specifed and directed.
S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specifed and directed.
S&F 150mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specifed and directed.
S&F 150 mm long Cast iron or malleable cast iron handles, cast type, stove enamelled black complete all as specifed and directed.
S&F 100mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specifed and directed.
S&F 100 mm long Cast iron or malleable cast iron handles, cast type, stove enamelled black complete all as specifed and directed.
S&F 300MM Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed comple all as specified and directed
S&F in repair IInd class small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each all as specified and directed
S&F 300 mm MS ordinary rat rail rod pattern spring including roller and plate complete all as specified and directed
S&F in repairs 300 mm MS ordinary rat rail rod pattern spring including roller and plate complete all as specified and directed
S&F Stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in repairs Stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F Mild steel flat iron 25x6mm as in hold fasts including all necessary cutting etc complete all as specified and directed.
M&L PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in bed block for fixing of hold fasts etc complete all as specifed and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads
S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane
Dismantling 500 Ltr capacity water tanks and removing to store
S&F 500 Ltr capcity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position.
Dismantling 1000 Ltr capacity water tanks and removing to store
S&F 1000 Ltr capcity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position.
S&F 20mm dia bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed
Cleaning and removing all scale and dirt, etc, from water tanks, capacity exceeding 250 litre but not exceeding 500 litre and from mouths of circulating pipes etc. by emptying, drying, cleaning by scrubbing the dust with wire brush from tank by removing inlet and outlet pipe and refixing inlet and outlet pipe with new tank connection fitting in the same position after cleaning and marking the date of cleaning on the tank with paint complete all as specified and directed. Note:- (a) Letter or figures (Block. Roman) of 5 cm high and min 5mm wide such as "CLEANED ON DD/MM/YY" shall be written on service water tank . (b) Cleaning shall be done every six months interval complete all as specified and directed.
All as per description of serial item No 112 here-in-before but capacity of tank exceeding 500 litre but not exceeding 1000 litre
Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressedstonework and precastconcrete articles
Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius with old size bricks built in Cement Mortar (1:6) complete all as specified and directed.
Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or removal to store
Taking up or down steel tubing 20mm bore and connections, including cleaning for refixing or removal to store
S&F medium grade GI tubes with all fitting and fixed complete to wall and ceiling or laid in floor 15 mm bore complete all as specified and directed.
S&F medium grade GI tubes with all fitting and fixed complete to wall and ceiling or laid in floor 20 mm bore complete all as specified and directed.
Demolition of RCC precast jalli of any thickness, complete all as specified and directed
M&L for Providing precast cement concrete louvers and jallies , 35 mm thick including all mouldings type B-0 1:2:4 ( using 12.5 mm graded stone aggregate) set in CM 1: 6 complete all as specified and directed.
Demolition of reinforced cement concrete of roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work etc complete all as specified and directed
M&L Form work to chajja and similar work including edges ffor rough finished surfaces complete all as specifed and directed.
M&L for M-25 Reinforced cement concrete (Normal Mix) (using 12.5 mm graded stone aggregate) as in chajjas and similar work complete all as specified & directed
S&F Mild Steel TMT bars 10mm and over, cut to lenghth, bent to shape requird, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clip all as directed
M&L for 5 mm thick rendering with cement mortar CM 1:3, on concrete surfaces as on soffit of stair case, chhajjas facia etc including cement slurry etc finished the surface even and smooth all as specified and directed
M&L for 75mm thick Cement concrete type C-1, 1:3:6 (using 20mm gradeds stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specifed and directed.
Dismantling/removing old damaged worn out APP of any thickness incl screed bed or plastering of any thickness and removing the rubish materials outside MOD land at a dumping place earmarked marked by any state govt/municipalities etc any distance complete all as specified and directed
M & L for cement concrete 1 : 2 : 4 type B-0 (using 12.5 mm graded stone aggregate) laid as in padding 35mm average thick over roof slabs for providing proper slope including finishing surface even and fair complete all as specified and directed
Material and labour, 15 mm thick cement plaster in CM (1:4) mixed with WPC as per manufacturer’s instructions @ 3% by weight of cement on concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately.
Cleaning and preparation of the surface to receive Fosroc Proofex ORG or its equivalent in approved make water proofing system shall be a sound base, any crack shall be treated with cementious repair mortar of Fosroc Renderoc CS or epoxy crack filling mortar by proper grooving arrangement complete all as specified and directed
Providing and laying / fixing TPO membrane of nonflammable waterproofing of roof which shall be a 1.5mm thick loose laid TPO membrane layers overlapped to achieve a minimum weld of 110mm, Hot air welding can be either hand applied or by means of automatic machines and the rolls either end are overlapped with layers of non-woven geotextile fiber, the separation layer provided to prevent the mechanical abrasion and cushioning between the Fosroc Proofex ORG membrane or its equivalent in approved make and the concrete substructure, the termination of Fosroc Proofex ORG or its equivalent in approved make by aluminium strip Note: Work shall be executed by authorised applicator with prior experience of more than 5 years in applying similar system."
Supply only Liquid water proofing compound
S&F in repair 18mm thick PVC foam board (WPC) of density 600kg/cum one side prelam and other side plain for kitchen cabinet shutter including fixing of 0.8mm thick acrylic laminates as edge banding in matching colour over all exposed edge Complete all as specified and directed.
S&F in repair factory made 18mm-19mm thick plain PVC foam board of density 600kg/cum manufactured by an ISO-900-2008 certified company for Shelf / Partitions / Drawer Complete all as specified and directed.
S&F in repair 5mm thick PVC foam board of density 600kg/cum both side plain for kitchen cabinet shutter Complete all as specified and directed.
S&F in repair 100 mm size Stainless Steel handle, complete all as specified and as directed
S&F in repair 38mm size Stainless Steel Piano hinges complete all as specified and as directed.
M &L in repair for ABS body magnetic latches of size 30mm complete all as specified and as directed.
S&F in repair Stainless Steel telescopic channel 500mm long, complete all as specified and as directed.
Taking down old false ceilling any type and description & M&L for gypsum false ceilings with size 60cm x 60cmx9mm thick false ceiling tiles laminated on face and side with decorative PVC films and a metalize polyester film on back sides back in dew drop texture Ceiling tiles shall be fixed over and incl Powdered coated GI T- grid system of size 600X600 mm as per the manufactures instructions complete all as specified & directed Note : Rates includes for taking down electrical fitting and refixing the same if required complete all as specified and directed.
M & L complete removal of existing treatment of walls and applying 10mm thick plaster of Paris ceiling (Gypsum anhydrous) to sunk or raised moulding to flat surface over metal frame work incl reinforced with G.I. wire mesh & Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre & Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. Note : Rates includes for taking down electrical fitting and refixing the same if required complete all as specified and directed.
Please Enable Macros to View BoQ information
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.85 MB
BOQ_840155.xls
BOQ • 2.07 MB
Tender78.pdf
Tender Documents • 1.38 MB
Download all tender documents and submit your bid