Supply, Transportation, carriage, erection, testing and commissioning for laying of HT and LT line with creation of 2 no. 100kva subsations at Debrah and 1 no. 250kva substation at Mansar in District Udhampur

Supply, Transportation, carriage, erection, testing and commissioning for laying of 2.5 km 11KV HT line on 9/11 mtr ST poles with weasel conductor at Mansar and Debrah

9 mtr long ST Pole (ST-410SP33) for HT Line

11 mtr long ST Pole (ST-410SP56)

GI V cross-arm with top Bracket including clamp

GI Channel X-arm including clamps and braces

0.03 ACSR Weasel conductor

PG Clamps for 0.03 ACSR Weasel Conductor

Galvanized Nuts and Bolts

Danger Plates with Clamps

Anti-Climbing Device with Clamps

11KV Pin Insulator (Polymeric) with Pins (12kv, 5KN) Creepage Distance 320mm

11KV Disc Insulators (Polymeric 45KN ) creepage distance 320 mm with tension fittings

Earthing complete by GI Rod 20 mm 2.5 mtr long through G.I Strip 25X3 mm in HT Lines

Painting of 11 mtr ST poles including crossarms/clamps with Red oxide Paint (1 coat) (Asian/Nerolac Make )

Painting of 11 mtr ST poles including crossarms/clamps with Aluminium Paint (2 coat) (Asian/Nerolac Make )

Painting of 9 mtr ST poles including crossarms/clamps with 1 coat of Red oxide Paint (Asian/Nerolac Make )

Painting of 9 mtr ST poles including crossarms/clamps with 2 coat of Aluminium Paint (Asian/Nerolac Make )

Cement bottoming 1:2:4 mix as per REC standards

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical

Supply, Transportation, carriage, erection, testing and commissioning for creation of 1 no 250KVA Distribution Transformer at Mansar

11/0.433kV, 3-phase 250KVA Distribution Transformers with Bimetallic Terminal Connectors Energy Level- 2, Copper wound for 250kVA rating and with LV Cable Box having detachable Aluminium Gland plate

Gapless Surge Arrestor,9 kV ,10 kA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

300 mm² (2 ckt), 1.1kV Grade, PVC Insulated Stranded Conductor FRLS type

9 mtr. Long ST Pole (ST-410 SP33)

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

GI Channel/Angle/Flat of sizes including clamps

Galvinized Nuts and Bolts.

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

LT Distribution Box with MCCB for incomer & SFU's for Outgoing Circuits ( For 250 KVA Substation)

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Wedge Connectors / PG Clamps

Danger Plates with Clamps

GI Barbed Wire for Anti Climbing

3-Ø, 4-Wire Trivector Meter with CT

Cement bottoming 1:2:4 mix as per REC standards

Painting of ST Poles 9mtr of substation including cross arm, clamps with1 coat of Red Oxide (Asian/Nerolac Make )

Painting of ST Poles 9 mtr of substation including cross arm, clamps with 2 coats of Aluminium Paint (Asian/Nerolac Make )

Supply, Transportation, carriage, erection, testing and commissioning for creation of 2 no. 100KVA Distribution Transformer at Debrah

11/0.433kV, 3-phase 100KVA Distribution Transformers with Bimetallic Terminal Connectors Energy Level- 2, Aluminium wound for 100kVA rating and with LV Cable Box having detachable Aluminium Gland plate

Gapless Surge Arrestor,9 kV ,10 kA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

185 mm² Cable, 1.1kV Grade, PVC Insulated Stranded Conductor FRLS type

9 mtr. Long ST Pole (ST-410 SP33)

11kV Polymeric composite Disc Insulator 12kV, minimum failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

GI Channel/Angle/Flat of sizes including clamps

Galvinized Nuts and Bolts.

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

LT Distribution Box with MCCB for incomer & SFU's for Outgoing Circuits ( For 100 KVA Substation)

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Wedge Connectors / PG Clamps

Danger Plates with Clamps

GI Barbed Wire for Anti Climbing

3-Ø, 4-Wire Trivector Meter with CT

Cement bottoming 1:2:4 mix as per REC standards

Painting of ST Poles 9mtr including cross arm,clamps with 1 coat of Red Oxide (Asian/Nerolac Make )

Painting of ST Poles 9 mtr including cross arm, clamps with 2 coats of Aluminium Paint (Asian/Nerolac Make )

Supply, Transportation, carriage, erection, testing and commissioning for laying of 0.65 km 3-ph 4-wire on 8/9 mtr ST poles with weasel cond

8 mtr. Long ST Pole (ST-410 SP15)

9 Mtr Long ST Pole (ST-410 SP33)

GI M-Clamps for Shackle Insulators

0.03 ACSR Weasel Conductor

16kN Polymer Shackle Insulators

Galvinized Nuts and Bolts.

Earthing Complete GI Rod 20mm 2.5 mtr long through GI Strip.

Painting of ST Poles 8 mtr including cross arm,clamps with 1 coat of Red Oxide (Asian/Nerolac Make )

Painting of ST Poles 9mtr including cross arm,clamps with 1 coat of Red Oxide (Asian/Nerolac Make )

Painting of ST Poles 9 mtr including cross arm, clamps with 2 coats of Aluminium Paint (Asian/Nerolac Make )

Painting of ST Poles 8 mtr including cross arm, clamps with 2 coats of Aluminium Paint (Asian/Nerolac Make )

Cement bottoming 1:2:4 mix as per REC standards

LT Line Spacers

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut- bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

M/S SURAJ PARTAP SINGH

AJAY KAPOOR

vijay builders

M/S JCM CONSTRUCTIONS

M/S VAISHNO TRADERS

R S CONSTRUCTION