Extension of special maintenance shed for filtration unit room and coil room at MRT premises Tatabad Coimbatore

Amount

Earth work excavation in all types of soil for leveling the undulated area with a head load lead of 100m over an initial lead of 10m and lift of 2m for filling as directed by the Engineer in charge including all Labour charges , Lead, Lift, T&Ps etc., complete.

Providing P.C.C. 1:4:8 using 40mm HBG metal for foundation and Basement as directed by the Engineer in charge including cost of all materials, labour charges, curing, T&P, leads, lifts etc., complete

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for raft including cost of cement, all materials, labour, curing, vibration charges, without shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for column below ground level upto basement including cost of cement, all materials, labour, curing, vibration charges, without shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Plinth beam including cost of cement, all materials, labour, curing, vibration charges, without shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Providing steel reinforcement MS/RTS rods up to 16 mm dia for reinforced concrete works, including cost of steel MS/RTS rods, binding wire, labour charges for cutting, straightening bending as per type design drawing, placing aligning, and tying properly with all leads and lift as per standard specification, etc., complete.

Brick work in C.M. 1:5 using class II chamber burnt bricks for super structure including, cost of cement, all materials, labour, curing, all leads and lifts, as per standard specification, etc., complete.

Plastering in CM 1:5, 12mm thick in for all round the building walls including cost of all materials, scaffolding charges, Labour charges, curing, Lead, Lift, T&P etc., complete

Colour washing with two coats of Oil Bound distemper over a coat of water based primer for interior surfaces including cost of all materials, scaffolding, Labour, Lead, Lift etc., complete

Supplying and fixing of colour coated crimp curve metal roofing sheet 0.5mm thick of TAT ISI make over M.S. Structural frame work with necessary screws including cost of colour coated metal roofing sheet, screws for fixing, and all the required materials, lead, lift labour charges etc complete

Providing P.C.C. 1:2:4 using 12mm to 20mm HBG metal for floor finish as directed by the Engineer in charge including cost of all materials, labour charges, curing, T&P, leads, lifts etc., complete

Painting the steel work with two coats of approved quality colour satin/Mastt finish enamel paint over a coat of primer of red oxide including cost of all materials, labour, brushes, lead, lift etc complete

Supplying and erecting pull and push type rolling shutter with ISI make of approved size and section using 18 gI sheet, The shutter shall be painted with one coat of red oxide primer including cost of labour, lead, lift etc complete(Electrically operated type exceeding 12Sqm area)

Supplying, fabricating and fixing in position MS gates, MS grills, MS ladder purlins, posts etc with required accessories such as but not limitede to MS angles, channels, pipes flats, square bars shafts, sheets ec as per approved design and as directed by the engineer in charge incluing cost of fabrication, transporting lifting and fixing in walls rigidly with concrete PCC 1:2:4 cost of all materials labour charges etc complete

Wiring with 2x1.5sq mm PVC unsheathed multistand copper cable of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW box with 5A FT in flush with wall covering with 3mm thick hylum sheet and painting with suitable colour for open PVC light and fan point (for electronice regulatore )etc complete as per standard specification

SGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only

Sathish Kumar & Co