CERTAIN REPAIR TO MISC BR WORKS SUCH AS JOINERY PLUMBING SANITARY FITTING ETC AT FAFA II OR MD ACCN SDP B ZONE AND CERTAIN ROOF REPAIR WORKS AT SITE I II III AND IV OF MD OFFRS ACCN UNDER AGE BR I OF GE WEST FEROZEPUR CANTT

Amount

Demoltion of brick work built in cement mortar of any specification and in any position complete all as specified.

M&L Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified.

M & L brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified.

All as per item 3 above here-in-before but using old bricks retrieved from demolition under item 1 hereinbefore including cleaning and removal of mortar from old bricks.

Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M&L Rendering/plastering on external surface of the wall of 15mm thick in cement mortar (1:4) on brick wall surfaces, surfaces finished even and fair complete all as specified.

M&L 10mm thick rendering in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified.

M&L 5mm thick rendering in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified.

M&L Preparation of newly plastered surfaces of walls & applying three coats coats of white wash complete all as specified.

M&L White wash in three coats on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified.

Preparation of newly plastered surfaces of walls and applyings two coats of cement base paint over a coat of primer complete all as specified and directed.

Taking down chowkat or frame with shutters(without taking off shutters from the frame)not exc 1.50sqm each

All as per srl item Noabove 12 here-in-before but exc 1.5sqm and not exc 4.00 sqm.

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each and removing from site.

M&L Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified.

All as per item 15 above here-in-before but size 125x60mm with double rebate.

All as per item No 15 here-in-before but size 75x50mm with single rebate.

S&F 35mm thick second class hard wood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24 complete all as specified.

S&F to Glazed and skeleton shutters 35mm thick of 2nd class hard wood with or without shash bar (hollock) open rebated and prepared to receive glass, gauze etc devided into square with plain chamfered or rounded and rebated sas bar (any no of bars)for securing glass, gauzed etc sizes of members of shutters as specified in SSR Part-1 sec-8 clause 8.24(a) complete all as specified.

M & L Preparing new surfaces of wood and wood based surfaces of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over acoat of pink primer complete all as specified.

M & L Preparing steel surfaces of of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over acoat of red oxide complete all as specified.

M & L PCC (1:2:4), type B-0 using 12.50mm graded stone aggregate as in filling of steel chowkhats complete all as specified.

S & F 300 mm Mild steel helical door spring including roller and roller plate complete all as specified.

S & F 300mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including bolts and nuts complete all as specified.

S & F Mild steel pressed handle, oval type, 125 mm size, stove enameled black and fixed with steel screws, complete all as specified.

S&F MS barrel tower bolts stone enamelled black with bright bolt,200mm length of bolt.

M&L Factory made box type steel window side hung with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

M&L Factory made box type steel window side hung with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

M&L Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified

S & F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples in repairs complete all as specified .

S&F in repair 3 mm thick ordinary quality sheet sheet glass glazing with oil putty and glazing clips fixed complete to wooden/sheet window not exc 0.5 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips, complete all as specified.

S&F 3 mm thick ordinary quality sheet sheet glass glazing with oil putty and glazing clips fixed complet to wooden/Steel window not exc .5 sqm in each pane

M&L Forming jambs etc built in cement mortor 1:6 to openings incl cutting toothing and properly bonding into to old work also facing ,jointoing and pointing to match to existing work complete all as specified.

M&L Solid PVC door frame of size 50x47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing as per specification

M&L Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail either side & as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing.

S&F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified.

S&F PTMT butt hinges,100mm long, fixed with steel screws with brass /bronze hinges pin complete all as specified and directed.

S&F PTMT handle 125mm long fixed with steel screws complete all as specified.

Dismantling of floor hearth and wall tilling incl mortar beding removing serviceable tiles to store and rubbish off the premises as directed by the Engr-in-Charge

M&L Non skid ceramic coloured (colour & shade as approved) tiles (square or rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.16 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6

M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m as in skerting/dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match and backing with 10 mm thick in CM 1:4 complete all as specified and as directed.

S/F of Glazed coloured and cereamic tiles in vertical surfaces 300X200X7mm / 450X300X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat 10mm thick in cement mortar 1:4 for laying skirting dados and vertical surfaces all as specified and directed

Demolition of Stone slabs and tiles laid bedded pointed in mortar of any description or thickness in floors, aprons etc.

M&L 60mm thick Coloured interlocking (M-35 Grade) cement concrete tiles of any shape and size confirming to IS 15658-2006 with grey cement and pigment. Complete all as specified and directed by Engr-in-Charge.

M&L sand filling under floors or in foundations including watering and consolidation complete all as specified.

M&L Plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregates) 75mm thick as in sub base of floor complete all as specified & directed.

Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in plinth oprotection, sub base etc 50mm thick, surfaces finished even and smooth without using extra cement complete all as specified.

Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near out let of RWP and OHT staging area or specifically ordered by Engineer-in-Charge in writing complete all as specified and directed.

Demolition of mud phuska on roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified & directed.

Material and labour for bedding screed or bedding layer 15 mm thick in cement mortar 1:4 mixed with 2% by weight water proofing compound as directed on roof of concrete surface finished even and smooth without using extra cement including preparation and cleaning of old concrete surfaces or racking out joints in old roof treatment etc complete all as specified and directed. (Note:- water proofing compound to be measured and paid separately)

M&L Tack coat of industrial bitumen 85/25 @ 1.20 Kilogram per square metre over a coat of bitumen primer @ 0.30 litre per square metre including preparation of roof surfaces complete all as specified and directed.

M&L Polythene film (transparent) 150 micron with 150mm end & side laps bonded with 80/100 bitumen and laid on roof, complete all as specified and directed.

Supply only water proofing compound

M&L Mud phuska, 80mm thick, average consolidated thickness, on flat roofs including 25 mm thick mud plaster complete all as specified and directed.

M&L Brick tiles 40mm thick laid over a 25mm thick layer of mud mortar (mud phuska) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement and pointed flush as the work proceeds complete all as specified and directed.

All as per item No:55 above herein before but except tiles. (tiles retrieved from item No:48 shall be reused)

M&L Cement concrete (1:2:4) type B-1 (20 mm graded stone aggregate) as in roof kerbs or mud stops, bed blocks, benching,copings etc including form work, weathering, slightly rounded or chamfered complete all as specified.

S&F 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings & dismantling existing water storage tank, complete all as specified.

All as per item no 58 above but 500 ltrs capacity tank

S&F 20mm bore brass ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified.

S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified.

S&F in repair 15mm bore angle cock of brass fancy type, chromium plated screwed down, high pressure with crutch or butter fly handle screwed for iron pipe complete all as specified.

S & F in repair Bib tap of alloy brass Chromium plated fency type 15mm bore, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

S&F 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe,

S & F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concret and concrete and 110 mm bore PVC (SWR) 'P' trap with 550 to 600 mm long neck for connectiong WC to branch piece with cement joints, fixed as in repair, complete all as specified.

S & F in repair 125mm dia CP grating doom fixed over trap with cement complete all as specified and directed

S&F 600mm long cp towel rail fixed to wall with steel screws and PVC rawl plug complete all as specified.

Supply & fixed in repairs PVC waste pipe with waste fittings, 32 mm bore size for sinks,WHB etc with long screwed shanks and fly nuts complete all as specified and directed

S & F Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete

Dismantling plain or corrugated Steel sheet any guage, thickness incl nainital & similar pattern on roof covering complete all as specified and directed.

S&F Pre painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc, complete all as specified.

S & F in repair 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S & F in repair 110 mm bore PVC (SWR) bends ad provided with access door complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed 75mm bore in any length with rubber ring joints laid in trenches or fixed to wall with clamps and using solvent solvent complete all as specified.

S & F PVC (SWR) bends any radius 75mm bore with access door complete all as specified.

S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

Taking up or down 15 mm existing steel tubing and connections and Re fixing old steel tubing and connections in new or old position complete to walls and ceiling or laid in floors complete including cleaning the steel tubing all as specified and as directed.

All as per item No.80 here in before but 20mm dia.

Demolition of cement concrete in sunken portion of any description and in any position not otherwise specifically provided.

M&L for pressure grouting with cement slurry adding admixture CONBEX 100 (FOSROC) at a dosage of 225gms for 50Kg of cement including drilling holes, to a depth of 60mm and 3 Nos of holes in 1M x 1M grit pattern all as specified and directed.

M&L a fillet of 75 mm size shall be provided using PCC (1:2:4) type B0 (using12.5 mm graded aggregate) mixed with WPC @3% weight of cement content at the junction of vertical and horizontal surfaces of the sunken portion. Note: WPC Measured and paid seperately

M&L for application of high build polymer modified to floor and vertical wall up to sunken portion with cement mortar Plaster (1: 3) with SBR @ 4 ltr per bag of cement appled as per manufacturer's instrutions.

M&L PCC (1:5:10) type E2 (using 40mm graded aggregate) in filling under sunken floor portion

M&L 30mm thick PCC(1:2:4) using 20mm graded aggregate as in floor finished without using extra cement.

S & F 150 MM floor door stopper of Aluminium Alloy and tonged with hard drawn steel spring fancy type in repair

S & F Mild steel curtain rod PVC powder coated with fixing side brackets, end cups, rings @ 10 Nos per RM and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified.

Dismantling of boarding of any description and in any position complete all as specified.

S & F 16mm Solid PVC board plain colour ,fixed with screws or adhesive with complete accessaries as in shelves with rebates fixed on PVC solid pattern of size 40mmx18mmx500mm on tree sides n complete all as spd and directed by Engineer in charge Make : Rajshree, Echon or equallent as approved by GE

S&F Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified.

Supply & fixed in repair PVC connection 15mm x 450mm size with PTMT nuts.

Dismantling of steel work including doors ,gates but excluding framed truss etc complete all as spd and directed

S&F mild steel Fe 410 -W(Gde E-250 quality Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.

M&L waste coupling brass CP for glazed sinks, basins etc with long shanks and fly nuts, flange embeded in cement and oehr and fixed 40 mm bore.

Taking down door shutters of any description and re-securing or easing and re-fixing the same n.exc 1 Sqm each complete all as specified and as directed

M & L for preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash on walls including cornices.

All as per item No 98 above but two coats.

M & L for preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash to ceiling.

M&L washing rubbing down and stopping of distempered and painted surfacesand applying one coat of Oil Bound Distemper on wall surfaces all as specified and directed.

M&L washing rubbing down and stopping of cement based painted surface applying two coats of cement based paint (Comaflage Pattern) on plastered surfaces all as specified and directed.

M&L of old painted surfacesand applying one coat of cement based paint (Comaflage Pattern) on wall surfaces including proper curing all as specified and directed.

M & L preparing old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint all as specified.

M & L for Preparing old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint all as specified.

Taking down carefully existig copper / aluminium point wiring for light / fan / bell / socket 5/15 Amp points complete with fitting and fixtures such as switches, sockets, ceiling roses, holders and bracket fittings with battens / conduits / wires and making good the disturbed surfaces of walls and roofs etc.and to match with existing colour complete all as specified and directed.

M&L point wiring with 1.5 Sqmm (Nominal area) FRLS PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor in and including PVC concealed conduit and conduit accessories along with continuous earth wire 1.5 Sqmm PVC insulated, unsheathed stranded copper conductor cable and connected to common earth dolly, with and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylum sheet cover fixed with brass screw complete with all accessories. (a) One light/fan/bell point controlled by one single pole one way switch.

(b) One socket outlet on the same board controlled by one single pole 5 Amp switch

(c) One 5 amps socket outlet independent controlled by one single pole 5 Amp switch.

All as per item No - 107 above but suitable wiring with 2.5 Sqmm PVC insulated, unsheathed FRLS cable of multistranded copper conductor with continuous earth wire of size 2.5 Sqmm PVC insulated FRLS, unsheathed,multistranded copper conductor for 15 Amps socket outlet controlled by one 15 Ampscable all as specified and directed.

S & F Switch piano flush type 5 amps, one way duly ISI marked.

S & F Switch piano flush type 15 amps, one way ISI marked.

S & F Socket outlet 5 pin, 5 Amps, piano flush type duly ISI marked.

S & F Socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type ISI marked.

S & F Ceiling rose surface type, PVC/polycarbonate ,isolated, bakelite 65 x 50mm, 3 terminals ISI marked.

S & F Lamp holder insulated body threaded dome pattern,suitable for bracket / batten fitting including 10 W LED lamp complete all as specified.

S & F stepped type electronic fan regulater flush type on the existing phenolic laminated sheet etc. as reqd complete all as specifed and directed

S & F bell push piano flush type 5 Amps single pole duly ISI marked .

S & F bell AC 230 volts single pole complete all as specified and directed.

S&F LED tube light fitting 1 X 18 W decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Cat Part No LCTL-18-CDL Make - Cropmton or equivalent to Havells/Bajaj/Philips

S&F in repair sheet metal enclouser DB's 8 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 volts 200 Amps rated enameled bus bar 8 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified.

All as per Item No 121 above but SPN DB's 4 way.

S & F in repair sheet metal enclouserDB's TPN 4 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series,and ACRYLIC window 415 volts 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified.

MCB TPN 415 volts 100 Amps, 10 KA breaking capacity complete all as specified.

MCB single pole neutral(SPN) 240 volts, 20 to 60 Amps, 10 KA complete all as specified.

MCB single pole(SP) 240 volts, 05 to 30 Amps, 10 KA complete all as specified.

S & F LED Bldg security light 30 watts with bracket (for housing security light fittings) made of light grade suitable size duly cutted and welded at an angle of 120 degree and fixed to wall with suitable bolts, nuts,and washers complete all as specified and directed. Model No ENDURAPEARLSL 30WLED757SASYTOPCMP of Havells OR Model No LSTS-30-CDL/NL-M of Crompton

Supply & Fix in repair sub main wiring of 6.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 6.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm dia all as specified and directed. Note:-Two single core 6.0 sqmm cable and one single core 6.0 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length).

KAILASH CONSTRUCTION COMPANY

AKASH ELECTRICALS

M/s Surjit Singh and bros

JAWAHAR CONSTRUCTION COMPANY

HAPPY ELECTRICALS

M/s AH Construction Co.

Harmesh Kumar Sharma and Sons