Construction of Kitchen Shed in Govt Hr Sec School at Poolambadi panchayat

Amount

Earth work excavating and deposition on bank with intial lead and lift all clauses of soil such as hard stiff clay soil ,stiff black cotton soil small size boulders and hard gravel soil as per SS 20 B for foundation etc.,

Excavated earth filling including of all labour charges etc., Complete.

Msand filling with Msand including all cost and conveyance of all labour charges etc., Complete.

Cement concrete in 1:4:8 mix using 40mm ISS HBG metal including all Cost and conveyance of labour charges etc.,Complete.,

Cement concrete in 1:2:4 mix using 20mm ISS HBG metal including all Cost and conveyance of labour charges etc.,Complete.,

Brick work in C.M 1:5 mix using country bricks incuding cost and conveyance and all labour charges etc.

Brick work in CM 1:5 mix using country bricks size of 9'' X 43/8'' x 23/4" including all cost and conveyance of labour charges etc.,Complte.

Supplying and errecting centering are strutting including necessary supports for place surface for RCC columns footing pedestal beam criticals pears etc.,using mild steel angles of sizes 90 x 90 x 10 cm gauge stifness welded mild steel of sizes 25 x 25 x 3 cm for boarding laying over silver oak joists of single 10cm - 6.5cm space of 75cm ceter to center

Supplying and errecting centering are strutting including necessary supports for place surface for RCC columns footing pedestal beam criticals pears etc.,using mild steel angles of sizes 90 x 90 x 10 cm gauge stifness welded mild steel of sizes 25 x 25 x 3 cm for boarding laying over silver oak joists of single 10cm - 6.5cm space of 75cm ceter to center

Supplying and Fabrication of steel for RCC works including all cost of cutting bending and tying of steels and kept ready for concrete in position etc.,

R C C 1:11/2:3 mix usinig 20mm ISS HBG metal including all cost and conveyance of labour charges etc., Complete.( Sub Structure)

R C C 1:11/2:3 mix usinig 20mm ISS HBG metal including all cost and conveyance of labour charges etc., Complete.( Super Structure)

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.

Plastering with CM 1:5 mix 12mm thick including all cost and conveyance of labour charges etc., complete.

Plastering with Cement Mortar 1:4 (One Cement and Three P.Sand) 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.

Granolithic flooring with CC 1;2:4 mix using 10mm -12mm ISS chips HBG metal including all cost and conveyance of labour charges etc.,

Supply of door of size of 0.90 x 2.10 including all cost and conveyance etc.,

Supply of Window of size of 1.2 x 1.30 including all cost and conveyance etc.,

Supply of Ventilator of size of 0.90 x 0.45 including all cost and conveyance etc.,

Distembering using two coats of Distember from aÁoved company including cost and conveyance of all materials to site and all labour charges etc complete for 10 sqm(Inner)

Painting two coats Emulsion paint over cement plastered wall including cost and conveyance of all materials to site and all labour charges etc complete

Painting with approved colour including all cost and conveyance of labour charges etc.,

Supply and fixing of Cuddapah slab 20/30mm Thick including all cost and conveyance of labour charges etc.,

Provision for electrification arrangements with service connection - Light point

Tube Light fitting

Exhaust Fan point

AC Exhaust Fan 300mm (12") Sweep( Light duty)

Plug point

CFL lamp

DPI swtich of 500 V

G I Pipe

Service Wire

1000liter tank

Provision for Name Board arrangements

Photocharges

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Contract (BID ID -1496917)