Balance work of Piped Water Supply Schemes of Villages basahat MALPURA of Village Khutkheda Block Sonkatchh of Distt. Dewas to make them functional including cost of all material and labour complete with testing of all work

Dismantling of Cement Concrete Pavment by mechanical means using pneumatic tools, cutter breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately USOR. Item.no.16.15.3-P.no.209

Installation of HDPE pipe by Horizontal Direction Drilling Method including preparing and setting up the plant and equipment , making string of new pipe material, installing new pipe string and making the system ready for commissioning by HDD operation including drilling, stringing,reaming and pulling back the new pipe on the designed bore path alignment , proper disposal of drilling fluid, as per code of practice for horizontal direction drilling technique suiting Indian conditions. Required pipes/specials and other civil work shall be paid separately - In all types of soils. HDPE pipes of any class 90 mm outer dia.(PHE USOR No 16.3 page 207)

Earth work in Excavationby mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be leveled and neatly dressed. Al Kind of Soil. USOR. Item.no. 16.4 -P.no.207

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be leveled and neatly dressed. Soft rock with or without blasting or bituminous pavement / cement concrete road. USOR. Item.no.16.6(a)-P.no.207

Providing, Laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical jointed),90 mm dia HDPE 6 kg, USOR 2018 6th amendment

Providing,

Providing butt fusion welded joint/joining by heating to the ends with the help of Teflon coated electric mirror/heater ends together etc. by thermosetting processes to HDPE Pipe and specials. (6 kg. 8 kg. 10 kg.) (50 mm & above fusion jointed & below 50 mm mechanical jointed),090 mm outer dia,USOR item 9.7 / P- 124

Providing and laying HDPE Bend 90º confirming to IS specifications.USOR.Item.no.9.2 -P.no.122 90 mm - 6 Kg / cm²

Providing and laying Equal HDPE Tee confirming to IS specification USOR Item.no.9.4 -P.no.123 90 mm - 6 Kg / cm²

Providing and laying HDPE End Cap confirming to IS specifications. USOR Item.no. 9.8 -P.no.124 110 mm

Laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical jointed),90 mm dia HDPE 10 kg, USOR 2018 6th amendment

Filling available excavated earth in trenches, lead up to 50m and lift upto 1.5 m in all kind of soil excluding watering and ramming.USOR. Item.no. 16.10b -P.no 208

Providing and jointing of following galvanized Iron (MS) Pipes class medium with heavy duty seamless sockets for lowering of submersible pumps including testing of joints, cost of pipes and heavy duty sockets and jointing materials all complete. Pipes and sockets conforming to IS-1239/2011 Part-II, 50 mm dia GI pipe class medium, USOR.Amnd II I.no.17.38-P.no. 3

Providing and jointing of following galvanized Iron (MS) Pipes class medium with heavy duty seamless sockets for lowering of submersible pumps including testing of joints, cost of pipes and heavy duty sockets and jointing materials all complete. Pipes and sockets conforming to IS-1239/2011 Part-II, 65 mm dia GI pipe class medium, USOR.Amnd II I.no.17.38-P.no. 3

Supply & errection of ready made mini pump house (control pannel box) GI sheet of 18 gauge of size 90cmx90cmx60cm with 40x40x5mm angle Iron frame to fix it 200 mm below ground level with hold fasts grouted in foundation and 600mm above ground level for clearance suitable for fixing of conrol pannel, fuse unit, main switch etc. as per aproved specification. USOR. Item.no.17.18-P.no. 228

Provision for Jointing of Rising Main to Sumpwell/ OHT and OHT to Distribution Pipe Line with cost of material / Specials such as Bends,MTA,FTA,Tee,flange,etc as per requirement of Site with excavation , labour as per requirement complete.as per approved specification and as directed by engineer incharge. USOR. Item.no.17.20-P.no. 229

Supply and Installation of Energy efficiant five star BEE rating ISI Marked required capacity of Three Phase, 50 Hz, 415 V, Deep well submersible pump steel body, suitable for 6" tube well with control panel , Starter suitable for Submersible pump with dry run protection, single phase preventer, connections, including clamps, bore cap etc. as required as per specifications but excluding pipe and connection cable. USOR. Item.no. 24.20.106-P.no. 267 10 H.P. with 20 stages, Head Mt. 184-80 Discharge LPM 60-270 USOR. Item.no. 24.20.106 (ix)-P.no. 267

Supplying & Installation of Five star BEE rating ISI Marked required capacity of Three phase, 50 Hz, 415V, Open well Submersible pump, with Control Panel Starter with Dry Run Protection, single phase preventer, connections, etc. as required as per specifications but excluding pipe and connection cable. USOR. Item.no. 24.20.113-P.no. 268 3.0 H.P. Head Mt.15-24, Discharge LPM 615-195USOR. Item.no. 24.20.113 (ii)-P.no. 268

Providing and fixing of ISI marked PVC insulated three core flat copper cable. 4 Sq mm (USOR Item No. 24.20.107 ii P-No. 267)

Providing and making Consumer Service Connection (Functional House Hold Taps Connection ) from HDPE Pipe with the help of Electro Fusion machine including all labour & material such as Electro Fusion Saddle, Brass Ferrule ( not less than 100 gm in weight ) / MDPE Ferrule / flow control valve, double compression elbow, male / female threaded adopter with metal insert, sockets, MDPE union 20 mm dia / GI union 15 mm dia (medium class), brass / SS Tape etc all complete and all items / fittings shall be complying with the relevant BIS codes. Rate also include excavation, cutting of road if required, refilling the trenches restoration of road with minimum M-20 (1:1.5:3) grade CC for equivalent grade of existing CC cutting for providing tap connection (whichever is richer ), construction of platform and grouting of circular post near finished as per the drawing attached, testing all complete items. For connection with 20 mm dia MDPE pipe upto 5 mtr and CONCRETE ROAD CROSSING is necessary.

Providing and making Consumer Service Connection (Functional House Hold Taps Connection ) from HDPE Pipe with the help of Electro Fusion machine including all labour & material such as Electro Fusion Saddle, Brass Ferrule ( not less than 100 gm in weight ) / MDPE Ferrule / flow control valve, double compression elbow, male / female threaded adopter with metal insert, sockets, MDPE union 20 mm dia / GI union 15 mm dia (medium class), brass / SS Tape etc all complete and all items / fittings shall be complying with the relevant BIS codes. Rate also include excavation, cutting of road if required, refilling the trenches restoration of road with minimum M-20 (1:1.5:3) grade CC for equivalent grade of existing CC cutting for providing tap connection (whichever is richer ), construction of platform and grouting of circular post near finished as per the drawing attached, testing all complete items. For connection with 20 mm dia MDPE pipe more than 5 mtr & upto 10 mtr and CONCRETE ROAD CROSSING is necessary.

Providing and making Consumer Service Connection (Functional House Hold Taps Connection ) from HDPE Pipe with the help of Electro Fusion machine including all labour & material such as Electro Fusion Saddle, Brass Ferrule ( not less than 100 gm in weight ) / MDPE Ferrule / flow control valve, double compression elbow, male / female threaded adopter with metal insert, sockets, MDPE union 20 mm dia / GI union 15 mm dia (medium class), brass / SS Tape etc all complete and all items / fittings shall be complying with the relevant BIS codes. Rate also include excavation, cutting of road if required, refilling the trenches restoration of road with minimum M-20 (1:1.5:3) grade CC for equivalent grade of existing CC cutting for providing tap connection (whichever is richer ), construction of platform and grouting of circular post near finished as per the drawing attached, testing all complete items. For connection with 20 mm dia MDPE pipe upto 5 mtr and ROAD CROSSING is not required. (distribution pipe line is on the same side of house)

Providing and making Consumer Service Connection (Functional House Hold Taps Connection ) from HDPE Pipe with the help of Electro Fusion machine including all labour & material such as Electro Fusion Saddle, Brass Ferrule ( not less than 100 gm in weight ) / MDPE Ferrule / flow control valve, double compression elbow, male / female threaded adopter with metal insert, sockets, MDPE union 20 mm dia / GI union 15 mm dia (medium class), brass / SS Tape etc all complete and all items / fittings shall be complying with the relevant BIS codes. Rate also include excavation, cutting of road if required, refilling the trenches restoration of road with minimum M-20 (1:1.5:3) grade CC for equivalent grade of existing CC cutting for providing tap connection (whichever is richer ), construction of platform and grouting of circular post near finished as per the drawing attached, testing all complete items. For connection with 20 mm dia MDPE pipe upto 5 mtr and ROAD (Other than Concrete Road ) CROSSING is necessary.

Providing and making Consumer Service Connection (Functional House Hold Taps Connection ) from HDPE Pipe with the help of Electro Fusion machine including all labour & material such as Electro Fusion Saddle, Brass Ferrule ( not less than 100 gm in weight ) / MDPE Ferrule / flow control valve, double compression elbow, male / female threaded adopter with metal insert, sockets, MDPE union 20 mm dia / GI union 15 mm dia (medium class), brass / SS Tape etc all complete and all items / fittings shall be complying with the relevant BIS codes. Rate also include excavation, cutting of road if required, refilling the trenches restoration of road with minimum M-20 (1:1.5:3) grade CC for equivalent grade of existing CC cutting for providing tap connection (whichever is richer ), construction of platform and grouting of circular post near finished as per the drawing attached, testing all complete items.For connection with 20 mm dia MDPE pipe more than 5 mtr & upto 10 mtr and ROAD (Other than Concrete Road ) CROSSING is necessary.

Design, Drawing, construction, testing and commissioning of GSR/ Sumpwell of following capacity with all necessary fitting and accessories as mentioned in relevant chapter of USOR, IS codes and departmental circulars. complete turnkey job for following 20 KL (USOR Amndm - II, Itm-26.2.1 / Pg 17)

Design, and construction of RCC framed brick masonary pump house over the sumpwell with all necessary fitting and requirements as mentioned in relevant chapter of USOR. IS codes and departmental guidelines complete turnkey job (USOR Amndm - II, Itm-26.3./ Pg 18)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :With 20mm nominal size graded stone aggregate.Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate (M 10) (S.O.R 4.1.1.4 / P-45 )

Reinforced cement concrete work (with 20mm nominal size graded stone aggregate) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, posts and struts etc. above plinth level and up to floor two level excluding cost of centering, shuttering, finishing and reinforcement : M 15 -Grade Concrete (MP PWD S.O.R 5.2.1 / P-65 )

11 KV line on 140 kg. 8.0 Mtrs. long PCC Poles with rabbit conductor average span of 70 mtr. in rural area. (Schedule Ref. C- 1.2 of MPMKVVCL SOR 2019-2020)

11 KV D.P. Structures on 140 kg. 8.0 mtr. long PCC poles for Straight line. (Schedule Ref. C-6.1 of MPMKVVCL for SOR)

23.11 KV DP Structures on PCC Poles Per MPPKVV Schedule & Inspection Report

L.T. Line 1 phase 3 wire on PCC support using Aerail Bunched XLPE cable with maximum span of 50 Meter. (Schedule Ref. D-3.2 of MPMKVVCL SOR 2019-20) 2 x 35+ 1 x 16 sq. mm (Insulated nuetral massenger)

11/0.4 KV out-door type transformer sub-station. (Schedule Ref. E-1.2 of MPMKVVCL for SOR) 25 KVA on 140 kg. 8.0 meter long PCC Pole

Fabrication, providing and fixing of typical information board of size 1.50 m x 0.90 m

Providing and installation of automatic water level indicator for supervisory control cum auto on/off panel of motor pump assembly, using GSM module based water level controller and accessories for small water supply scheme, having source more than 500mtr but within 10 Kms as per approved specification and as directed by Engineer in charge. PHE USOR 17.12 P.No 226

Providing and installation of automatic water level indicator for supervisory control cum auto on/off of motor pump assembly inclusive of control panel ,500 mtr long 2 core ,4 pair cable for small rural water supply scheme, having source within 500mtr as per approved specification and as directed by Engineer in charge.(In case of lesser length of cable,equivalent amount @ Rs 12 /-per meter of short length will be deducted from above rate) USOR I.No. 17.11 P.No.226