Construction of road at Brinty Mughalpora

Felling/cutting of trees. Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 30cm girth upto and including 60cm girth.

Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 60cm girth upto and including 120cm girth.

Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 120cm girth upto and including 240cm girth.

Surface dressing Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15cm deep and disposal of rubbish, lead upto 50m and lift upto 1.5m in - All kinds of soil.

Providing and laying Nalla muck/RBM Supplying and filling of RBM of specified grade and size including watering, dressing, and ramming with PRR 8 to 10 ton capacity with all carriages, loadig/unloading complete.

Providing and laying of WBM Grade-II Laying Water bound maccadam with specified stone agg. Stone screening and binding material incl. secreanings, sorting, spreading to template and consolidation with PRR 8-10 ton capacity incl. Supplying and stacking of stone screenings, chippings at site Incl. c/o carriage. (13.2mm nominal size) Supplying and stacking of moorum (stone dust) at site including carriage.

Providing and Laying Khak Bajri filling in berms. Supplying and Proving of Khak Bajri Filling/GSB in berms including dressing, watering and consolidation with PRR including all carriages complete.

providing/laying of Wet Mix Macadam. Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications & directions of Engineer-In-Charge( i/c carraige)(75mm thick)

providing/laying of 50mm thick Bitumenous Macdam. Providing and applying tack coat using bitumen emulsion conforming to IS: 8887, using emulsion pressure distributer including preparing the surface and cleaning with mechanical broom On W.B.M. /W.M.M. @ 0.4 Kg/sqm

Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge 50 to 100 mm average compacted thickness with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity.

providing/laying of 25mm thick Semidense and 6mm thick Sealcoat. Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. 25 mm compacted thickness with bitumen of grade VG- 10 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity.

Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete.

PCC Side drains Earth work in excavation by mechanical means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earthband disposal of surplus excavated earth as directed. (in all kinds of soils).

P/L Stone Soling of Specified size duely hand packed incl. all carriages and loading/unloading

Providing and Laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:4:8 mix.

Providing and Laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:2:4 mix(using 20mm n/s crushed aggregates) DRAIN

Providing and Laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:2:4 mix(using 20mm n/s crushed aggregates) SLAB

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more

Centering and Shuttering including strutting, propping etc. and removal of the same for foundatons

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

12 mm thick cement plaster in 1:6 mix

P/L Nallah Boulders Handpacked of Specified Grade And Size Including ramming Spreading And Compacting With power road Rolleer 8-10 tone Capicity and all Carrage and loading/unloading complete. Back filling

Carriage of different items by machanical transport including loading/unloading. 40mm + 20mm nominal size aggregates from mirbazar for an average lead of 20 KMs.

Carriage of different items by machanical transport including loading/unloading. Sand from source for an average lead of 20 Kms

PCC Retaining wall/Edge wall Earth work in excavation by mechanical means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed. (in all kinds of soils).

P/L Stone Soling of Specified size duely hand packed incl. all carriages and loading/unloading

Providing and Laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:4:8 mix.

Providing and Laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:2:4 mix(using 20mm n/s crushed aggregates)

Centering and Shuttering including strutting, propping etc. and removal of the same for foundatons

P/F of 75mm dia PVC weep holes in proper line and gradient complete job.

P/L Backfilling RBM of specified grade and size including ramming spreading and compacting with power road roller 8-10 tonne capacity and all carriages & loading/unloading complete

Carriage of different items by machanical transport including loading/unloading.40mm + 20mm nominal size aggregates from Mirbazar for an average lead of 20 KMs.

Carriage of different items by machanical transport including loading/unloading.Sand from for an average lead of 20 Kms

PCC Retaining wall/Drain Earth work in excavation by mechanical means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed. (in all kinds of soils).

P/L Stone solling of Specified size duely hand packed incl. all carriages and loading/unloading

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level in 1:4:8 mix.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of the same for foundatons.

P/F of 75mm dia PVC weep holes in proper line and gradient complete job.

P/L Backfilling RBM of specified grade and size including ramming spreading and compacting with power road roller 8-10 tonne capacity and all carriages & loading/unloading complete

Carriage of different items by machanical transport including loading/unloading.40mm + 20mm nominal size aggregates from Mirbazar for an average lead of 20 KMs.

Carriage of different items by machanical transport including loading/unloading.Sand from for an average lead of 20 Kms

PCC Breast wall Earth work in excavation by mechanical means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed. (in all kinds of soils).

P/L Stone solling of Specified size duely hand packed incl. all carriages and loading/unloading

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level in 1:4:8 mix.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level in 1:3:6 mix.

Centering and shuttering including strutting, propping etc. and removal of the same for foundatons.

12 mm thick Cement Plaster in 1:6 mix.

P/F of 75mm dia PVC weep holes in proper line and gradient complete job.

Carriage of different items by machanical transport including loading/unloading.40mm + 20mm nominal size aggregates from Mirbazar for an average lead of 20 KMs.

Carriage of different items by machanical transport including loading/unloading.Sand from for an average lead of 20 Kms

RCC Culvert Earth work in excavation by mechanical means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed. (in all kinds of soils).

P/L Stone solling of Specified size duely hand packed incl. all carriages and loading/unloading

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level in 1:4:8 mix.

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excludingcost of centering shuttering, finishing and reinforcement. Slab & Raft

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excludingcost of centering shuttering, finishing and reinforcement.Abuts, Wheel Gaurds, Haunch

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of the same for foundatons.

Reinforcement for RCC work i/c straightening, cutting ,bending,placing in position binding all complete mild steel and medium tenile steel bars.

P/F of 75mm dia PVC weep holes in proper line and gradient complete job.

P/L Nallah boulders handpacked of specified grade and size including ramming spreading and compacting.

Carriage of different items by machanical transport including loading/unloading.40mm + 20mm nominal size aggregates from Mirbazar for an average lead of 20 KMs.

Carriage of different items by machanical transport including loading/unloading.Sand from for an average lead of 20 Kms

RCC Culvert Earth work in excavation by mechanical means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed. (in all kinds of soils).

P/L Stone solling of Specified size duely hand packed incl. all carriages and loading/unloading

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level in 1:4:8 mix.

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excludingcost of centering shuttering, finishing and reinforcement. Slab & Raft

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excludingcost of centering shuttering, finishing and reinforcement.Abuts, Wheel Gaurds, Haunch

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of the same for foundatons.

Reinforcement for RCC work i/c straightening, cutting ,bending,placing in position binding all complete mild steel and medium tenile steel bars.

P/F of 75mm dia PVC weep holes in proper line and gradient complete job.

P/L Nallah boulders handpacked of specified grade and size including ramming spreading and compacting.

Carriage of different items by machanical transport including loading/unloading.40mm + 20mm nominal size aggregates from Mirbazar for an average lead of 20 KMs.

Carriage of different items by machanical transport including loading/unloading.Sand from for an average lead of 20 Kms

RCC Spun Pipes Providing & laying of RCC spun pipes i/c necessary earthwork in excavation and filling cushion over pipes with RBM i/c cost and carriage of all materials complete. 450 mm Dia Pipe

Providing & laying of RCC spun pipes i/c necessary earthwork in excavation and filling cushion over pipes with RBM i/c cost and carriage of all materials complete. 600mm Dia Pipe

Road Furniture Items Manufacturing supplying and fixing retro reflective signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-4956- 01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum M.S. angle iron of size 25x25x3mm along with theft resistant measures mounted and fixed with 2 nos. M.S. angles of size 35x35x5mm to a vertical post made upto M.S. Tee section ISMT 50x50x6mm welded with base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing M.S. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical M.S.-Tee support to be painted in black and white colours). Backside of aluminum sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coats including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge. Mandatory/Regulatory sign boards of 900 mm diameter with part as length of 3750 mm. (a) Mandatory/Regulatory sign boards of 900 mm diameter with part as length of 3750 mm.

Road Furniture Items Manufacturing supplying and fixing retro reflective signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-4956- 01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum M.S. angle iron of size 25x25x3mm along with theft resistant measures mounted and fixed with 2 nos. M.S. angles of size 35x35x5mm to a vertical post made upto M.S. Tee section ISMT 50x50x6mm welded with base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing M.S. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical M.S.-Tee support to be painted in black and white colours). Backside of aluminum sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coats including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge. Mandatory/Regulatory sign boards of 900 mm diameter with part as length of 3750 mm (B) Cautionary/warning sign boards of equilateral triangular shape having each side of 900 mm support length of 3650mm

Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-4956- 01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). a. Overhead informatory road signage

Maintenance Part for 5 years

(I) Ist Year 10%

(ii) 2nd year 15%

(III) 3rd year 20%

(IV) 4th year 25%

(V) 5th year 30%