Construction of a volleyball court, a pathway from the main road to the gate, and a boundary wall for the hostel at Kasturba Gandhi Girls School, Dilari.

Dismanling of Brick work in cement mortar i/c disposal of refuse with in distance of 60m. as dircted by the E/I (S.I.No.692)

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil as per DSR - 2.8.1

Cement Concrete 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8graded stone aggregate 40 mm nominal size derived from natural sources)As per SI No-.4.1.8

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6coarse sand) As per SI No-6.1.2

Providing and laying in position 1:1.5:3 (1 Cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level As per SI No.-5.1.2

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in Cement mortar 1:6 (1 cement : 6coarse sand)As per SI No-6.4.2

12mm thick plaster with cement and coarse sand-1:6 (1 cement: 6 coarse sand) AS per SI no-13.4.2

Finishing walls with water proof paint of required shade: New work (Two or more coats applied) Sl no. -13.44.1

Less Quantity of Bricks received from dismantling of old brick wall at site.

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform As per SI No.-5.9.3

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars As per SI No.-5.22.1

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. as per SI no. 10.31

Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift.(DSR - 2.25a)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as per Sl no. -13.62.1

Concrete with the 4 cm guage Brick Ballast, and Fine sand and Cement in proportion of 12:6:1 in foundation and under flooring complete in all. as Pwd S.I No. 273

Cement Concrete 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)As per DSR No-.4.1.3

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4coarse sand) As per DSR No-6.1.1

Providing and laying in 1:5:10 (1 Cement : 5 fine sand derived from natural sources : 10graded stone aggregate 40 mm nominal size derived from natural sources excluding the cost of centering and shuttering all work upto plinth level (DSR 2023-.4.1.11)

Providing and laying of 80 mm thick precast Cement concrete I Shape Interlocking paver block with 4 cm thick layer of fine sand including cost of materials, laboure,and T&P etc. pwd Chapter 21 additional item N0 5 (1)

Construction of information piller in brick work with Black Granite stone (2x3) size with B/W in 1:4 in 1.20m.wide wall, 23 to 35 cm thickness & 1.35m. Height above G.L. with plaster in 1:4 as per drawing attached I/C digging & painting of letters ,snowcem two coats & I/C all materials, labour and T&P etc. complete.

Please Enable Macros to View BoQ information