Canteen_CCGGN

Amount

Preparation of plastered surface for oil bound distemper including sand papering the surface, applying one coat of linseed oil, and filling with approved quality filler, consisting of white lead, linseed oil, varnish and chalk miti including finishing the surface to the required finish complete (HSR item No.16.51)

Distempering with washable oil bound distemper (of approved manufacture) two coats on old distempered work (HSR item No.16.60)

Painting two coats with synthetic enamel paint in all shades on old wood-work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint complete in all respect (HSR item No.16.5)

Providing two coats of exterior acrylic emulsion paint of 1st quqlity complete in all respect (HSR item No.16.79)

Chowkats of commercial hard wood such as hollock, champ, chikassy and chaplash etc., (Non-coniferous timber other than teak conforming to I.S.specification no.1003 kiln seasoned, of doors and windows including iron hold fasts, corner straps, scraws, bolts for hold fasts, etc., complete fixed in position ( HSR item No. 17.12)

Commercial hard wood such as hollock, champ, chikrassy and chaplash, etc., (non- coniferous timber other than teak conforming to I.S. specification No.1003 kiln seasoned),shutters with vertical styles and rails, as specified in the statement No.1 (attached in the end of this chapter), with two Nos. plywood panels of the specified thickness, mentioned below, tongued and grooved including the cost of iron hinges, screws, chocks/cleats, stops, etc., complete fixed in position excluding the cost of tower bolts and handles but including the labour for fixing the same complete in all respect (HSR item No.17.30a) 35mm thick

Wire gauze commercial hard wood such as hollock, champ, chikrassy etc. (non-coniferous timber other than teak conforming to I.S. specification No. 1003 kiln seasoned) door and window shutters without springs housed in chowkats including chocks, iron hinges and screws, etc., complete fixed in position (excluding the cost of tower bolts and handles but including the labour for fixing the same). complete in all respect (HSR item No.17.31a) (30mm thick)

Cost of aluminium fittings complete for doors and windows, such as tower bolts,handles,etc., and screws for these fittings (excluding sliding bolt) for single leaf shutter complete in all respect (HSR item No.17.72a)

Providing and fixing sliding bolt with nuts and screws,etc. complete in all respect (HSR item No.17.83c-ii) 250mmx16mm

Supplying and fixing glass panes with moulding of commercial hard wood such as hollock, champ, chikrassy and chaplash etc.(Non coniferous timber other than teak, conforming to I.S. specification No.1003, kiln seasoned). 4 mm thick (glazing area above 55 sq dm, but upto 84 sq dm of each pane) complete in all respect (HSR item No.17.36c)

Providing and fixing HDPE water storage tanks of Sintex, Diplast, O.K. make with covers/lids marked with IS: 12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow & scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction of Engineer-in- Charge. (except civil work). (HSR item No.30.119) 1000 Ltr Tank

Providing and fixing in position C.P. brass stop cocks (as approved by the Engineer-in-charge)15mm stop cock concealed stop cock with flange (HSR item No.30.76b-ii) 20mm including stop cock concealed with flange

PROVIDING AND FIXING IN POSITION AUTOMATIC BRASS BALL VALVES IN TANKS. (HSR item No.30.110b-ii)

First Class brick work laid in cement stone dust mortar 1:4 in first storey upto 4.0 mtr above plinth level HSR item No. 11.29)

Removing door and window wood and steel with chowkats by making recesses in walls when the walls is not to be dismantlled (HSR item No. 8.18) Door

Window

Steel reinforcement Fe-500 E.Q.R. TMT Steel bars for R.C.C. works, where not included in the complete rate of R.C.C. including bending, binding and placing in position complete. complete in all respect (HSR item No. 18.22)

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centring and shuttering, laid in position complete in all respects. complete in all respect (HSR item No. 10.82)

Terracing consisting of tiles 22.86 cm X 11.43 cm X 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and on other layer of mud mortar for laying the tiles, including two coasts of bitumen laid hot at 1.65 Kg per sqm on top of R.C.C. slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc. complete in all respect (HSR item No. 13.13)

Providing LABOUR FOR LAYING JOINTING, FIXING AND TESTING G.I./P.V.C./W.I.PIPE LINES AND SPECIALS tees bends, sockets elbows etc., INSIDE BUILDING and testing etc., complete including cutting threading complete in all respect (HSR item No. 28.18b-ii) 20mm dia pipe

EXTRA FOR FIXING FLANGED JOINTS ON G.I.AND W.I.PIPELINES INCLUDING COST OF JOINTING MATERIALS (HSR item No. 28.20b)

EXTRA FOR FIXING AND JOINTING UNION COUPLINGS IN G.I. AND W.I.PIPELINES. (HSR item No. 28.21b)