Installation of Decorative Street Light from Laxmi Bazar Culvert to MS Law Hostel in ward No. 41.

Supply and erection of 7 mtr long single arm Ornamental Decorative Poles for Roadway Lighting made out of combo type Hot Dip Galvanized Pipes as per the IS: 1161 : 1998. Bottom - 100mm x 3000 mm, the round arm brackets are made out of 40mm pipes. the base plate size - 300mmx300mmx16mm with Ornamental cast aluminum spigots at the middle. the bottom of the pole will have a decorative FRP designer base (as per drawing) for beautification of pole. The pole will have PYU based itch primer & matt finish colour on the surface to make it absolutely rust & corrosion proof as well as giving the pole a fantastic aesthetic look. Suitable for 60 W LED Tear Drop light fittings complete with transportation, T&P and labour charges as per the direction of the Engineer-in-Charge. (Make- Bajaj / Crompton / Utkarsh / Vakrangee / RR / Sleex or equivalent make).

Supply and erection of Ornamental Decorative Pole 20 mm foundation bolt, nut, Washer including template complete with transportation, T&P and labour charges as per the direction of the Engineer-in-Charge.

Supply of all materials, labour, T&P and transporation for providing earth work, filling in foundation with clean coarse river sand, RCC M-20 using 12mm size hard granite Stone Chips with centering, shultering including cutting, bending, binding & tying the Grills and cost of M.S. Rod, binding wire, providing 6mm thick Cement plaster finished smooth over RCC surface, painting two coats of paint with weather proof cement paint over one coat of primer and carriage of excavated materials within 5 kms lead by mechanical means with cost, conveyance, royalty, taxes etc. all complete as per the OPWD specification & direction of Engineer in charge. (For Foundation & erection of Supply and erection of 7 mtr long single arm Ornamental Decorative Poles)

Supply, fitting and fixing of 60 Watt. Tear Drop LED light. Heavy duty spun aluminum housing heat resistant acrylic diffuser IP65. Rated Voltage-220V Frequency-50Hz, Currernt 240V-0.150-0.180., Wattage 240v-60W, PF->-0.9 etc. complete with transportation, T&P and labour charges as per the direction of the Engineer-in-Charge. (Make: BAJAJ / HAVELLS / CROMPTON /Philips)

Supply, fitting and fixing of Coil Earthing etc. complete with transportation, T&P and labour charges as per the direction of the Engineer-in-Charge.

Supply and laying of 2 core x 10 sq mm PVC insulated PVC sheathed armoured over head aluminum cable for interconnection of power supply for the 7 mtr long single arm Ornamental Decorative Poles to Pole including cost of materils, labour, T&P and transportation etc. complete as per direction of the Engineerir-in-charge. (Make of wire - Finolex / Polycab / L&T / Anchor / Havels / V Guard)

Supply, fitting and fixing of cable overhead supply arrangements : Supplying and erection of galvanised D' iron clamps complete with CI knob for holding overhead supply cables to hold 2 core x 10 sq mm to provide support to unarmoured aluminium cable for overhead supply for poles arrangements. Galvanised 'D' iron clamps complete with CI Knob etc. complete with transportation, T&P and labour charges as per the direction of the Engineer-in-Charge.

Supply and laying of aluminimum alloy messenger wire of 16 Sq mm to support overhead armoured aluminium 2 core x 10 sq mm cable to be installed at pole to pole etc. complete with transportation, T&P and labour charges as per the direction of the Engineer-in-Charge..

Supply and laying of 2 core x 16 sq mm PVC insulated PVC sheathed armoured underground aluminum cable for power supply from LT Pole to outdoor stand mounted Feeder Pillar Panel including cost of materils, labour, T&P and transportation etc. complete as per direction of the Engineerir-in-charge. (Make of wire - Finolex / Polycab / L&T / Anchor / Havels / V Guard)

Supply and laying of 1½" OD HDPE Pipe for laying of cable under 700mm (depth may vary as per side condtion) including cost of materials, labour, T&P and transportation as per direction of the Engineer-in-Charge. For Laying of cable for power supply from LT Pole to outdoor Feeder Panel and interconnection of road for the 7 mtr long single arm Ornamental Decorative Poles as per direction of the Engineer-in-charge.

Cable trenching by cutting of C.C./ B. T. Road, hard soil / dismantling of pave tiles in smart foot path and reinstallation the same in orginal postion for laying of cable inside HDPE Pipe including excavation of earth, filling of sand and loose earth to the original ground level with surface dressing and making good to the surface with removal of surplus earth as per direction of the Engineer-in-charge.

Supply and laying of 2.5 Sq.mm PVC insulated sheathed twin core flat aluminum wire for power supply to 60 Watt. Tear Drop LED light Fitting as per the direction of the Engineer-in-Charge. (Make of wire - Finolex / Polycab / L&T / Anchor / Havels / V Guard)

Supply and fixing of in built junction box with connector, 16Amp. MCB in each pole as per the direction of the Engineer-in-Charge.

Supply and fixing of 18 mtrs. long LED Strip Tri Colour Light including Driver with Ingress protection : IP65 in the existing Tubular Pole etc. complete with transportation, T&P and labour charges as per the direction of the Engineer-in-Charge. (MAKE: BAJAJ / HAVELLS / CROMPTON / PHILLIPS or equivalent make)

S/F "B" SERIES, SP MCB : Supply and fixing of 6 Amp to 32 Amp rating 240 Volts "B" searies Miniature Circuit Braacker (MCB) for lighting and otherr loads of the following poles in the existing MCB DB ISI marked comple with connections, testing and commissioning etc. as required for power supply to above LED Strip Light as per the direction of the Engineer-in-Charge. (SR Sl. No.2.6). (A) Single Pole (SP) (SR Sl. No.2.6.1)

Supply and fixing of 2 core x 1.5 Sq.mm. PVC Insulated and PVC Round Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Flexible Cables for Voltage Grade 1100 Volts conforming for power supply to above LED Strip Light as per direction of the Engineer- in- charge. (Make of wire - Finolex / Polycab / L&T / Anchor / Havels / V Guard)

Supply and fixing of Single Phase outdoor type Panel Board with double door locking arrangement made of 16 SWG C.R sheet of size 2'-0" x 1'-6" x 1'-0" and painting with 2 coats of approved paints i. e. D.A.grey with foundation of size 3'-0" x 1'-6" x 1'-0" . The Panel Board consisting of the following accessories. (i) 100 Amp. Kit Kat - 2 nos. (Make-Anchor/HPL/Havelle/L&T), (ii) 63 Amp. 2 pole "C" series MCB - 1 no, (iii) 40 Amp. 2 pole NHD Series Contactor – 1 no. (iv) Timer - 1 no (iii) Indicator Lamp - 1 no., (iv) Danger Board - 1 no., with complete wiring with 10sq.mm / 4sq.mm / 2.5sq.mm copper wire as per direction of the Engineer- in- charge.

Supply, fitting and fixing of Chemical Earthing etc. complete with transportation, T&P and labour charges as per the direction of the Engineer-in-Charge. (For Panel Earthing)