Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Ref. No.
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹2.8 Cr
EMD Value
₹5 L
Closing Date
5 Dec 2022, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Niraj Mishra
Sr General Manager (C and M) Power Grid Corporation of India Limited North Eastern Region, Dongtieh, Lower Nongrah, Lapalang, Shillong 793006
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
NESH/CSM/SRM/OT/1500-1087/NIT
Open
Civil - All
Works
ASSAM
₹12,500
₹5 L
28 Oct 2022
28 Oct 2022
5 Dec 2022
28 Oct 2022
28 Nov 2022
28 Oct 2022
Name of the Package Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
Package Code Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
Specification No. Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB)
Completion Period 24 Months
ATTACMENTS Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS. Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB)
1 Fill up only green shaded cells in the relevent attachments.
2 Attachments 3(QR), 4, 4(A), 5, 5(A), 6, 9, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 and Bid Form for 1st Envelope are included here. Attachment 7 (Alternative bid) is not applicable
3 Attachment 1 Bid Security : To be submitted as per proforma provided in the Bidding Document.
4 Attachment 2 Power of Attorney : No specific format is provided by POWERGRID. Bidder may use their own format.
5 Attachment 8 Manufacturer’s Authorisation Form : To be furnished as per proforma provided in the bidding document, on the letter head of the each Manufactures proposed to supply main items.
6 Attachment 14 Integrity Pact : To be submitted as per SCC Clause No. 5.0.0 and as per remarks in the Integrity Pact format
7 Attachment 18 Safety Pact : To be submitted.
8 Attachment 20 Declaration of Key Managerial Person: To be submitted as per SCC
9 Attachment 21 Affidavit of self-certification: To be submitted as per SCC
10 Attachment 22 Certificate from statutory auditor : To be submitted as per SCC
12 Attachment 24 Declaration by the Bidder and its proposed Associate regarding events encountered pursuant toSCC.
General Instruction to the Bidders for filling up this workbook for Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
I While filling up the worksheets following may please be observed :
(i) Fill up only green shaded cells.
(ii) Certain data type entries have been restricted, such as Numeric values or limits of numeric values.
(iii) Select only the options provided in pull down menus.
(iv) Do not link any cell of this work book with any other work book.
(v) Do not use copy & paste or cut & paste options for filling up the data.
(vi) Do not reformat any of the cell of the work book.
Happy Bidding !
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS. Sole Bidder 1
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) JV (Joint Venture) 2 or More
Micro and Small Enterprise (MSE)
Enter following details of the bidder
Specify type of Bidder [Select from drop down menu] Micro and Small Enterprise (MSE) 3
Name of MSE XXX
Address of Lead Partner YYY 0
Name of other Partner - 1
Address of other Partner - 1
Name of other Partner - 2 (more, if any)
Address of other Partner - 2 (more, if any)
Are you Micro/Small Enterprise? 2
Enter the name of Registration Authority.
Printed Name La La La
Designation Za Za Za
Date 9 May 2023 31
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB)
Before filling up the Bid Form, the Bidder is required to fill up the details as under :
1 Tick whichever is applicable:
Indicate the name of Associate here, if applicable. 1 USD
1 Enter Details of Amendments: INR
Amendments to Bidding Documents issued:
2 Bid Security Bank Draft
3 Currency INR Amount 58,000
4 Validity in months
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) Bid Form (First Envelope) 1 st 1 January 1 one
2 nd 2 February 2 two
BID FORM (First Envelope) 3 rd 3 March 3 three
4 th 4 April 4 four
Bid Proposal Ref. No. 5 th 5 May 5 five
Date : 9-May-2023 7 th 9 6 June 7 seven
8 th 5 7 July 8 eight
To: 9 th May 8 August 9 nine
Chief General Manager (C&M) 10 th 2023 9 September 10 ten
Power Grid Corporation of India Limited 11 th 10 October 11 eleven
North Eastern Region 12 th 11 November 12 twelve
Dongtieh, Lower Nongrah, Lapalang 13 th 12 December 13 thirteen
Shillong – 793 006 (Meghalaya). 14 th Zero 14 fourteen
15 th () 15 fifteen
Name of Contract : Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS. the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial Operation, Performance & Guarantee Test as per provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently).0 16 th 16 sixteen
Dear Ladies and/or Gentlemen, 17 th 17 seventeen
1.0 Having examined the Bidding Documents, including amendment No. dated 00/01/1900, the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial Operation, Performance & Guarantee Test as per provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently). the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial Operation, Performance & Guarantee Test as per provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently). 0 18 th 18 eighteen
1.1 We meet the eligibility requirements and have no conflict of interest in accordance with SCC Clause 5.0
2.0 Attachments to the Bid Form (First Envelope) 20 th 20 twenty
2.1 In line with the requirement of the Bidding Documents, we enclose herewith the following Attachments to the Bid Form : 21 st
(a) Attachment 1: Bid Security in the form of Bank Guarantee for a sum of INR Fifty Eight Thousand Only initially valid for a period of months from the date set for opening of bids. Bank Draft 22 th
Or Online Payment Acknowledgement towards Bid Security for a sum of ................................................ (name of currency and amount in words and figures)
OR Documentary evidence in support of exemption of Bid Security, in separate envelope in accordance with clause 13.1 of ITB, Section-II. 2
(b) Attachment 2: A power of attorney duly authorized by a Notary Public indicating that the person(s) signing the bid have the authority to sign the bid and thus that the bid is binding upon us during the full period of its validity in accordance with the ITB Clause 14. Pay Order 23 th
(c) Attachment 3: The documentary evidence that we are eligible to bid in accordance with ITB Clause 2. Further, in terms of ITB Clause 9.3(c) & (e), the qualification data has been furnished as per your format enclosed with the bidding documents [Attachment – 3(QR)]. Banks certified Cheque 24 th
* Further, the required deed of Joint Venture Agreement signed by us and our Partners has also been furnished as per your format [Attachment – 3(JV)]. 3 Bank Guarantee
*Further the requisite deed of Joint Undertaking as per stipulated qualification requirement in Annexure-A (BDS) has also been furnished as per your format.
(d) Attachment 4: The documentary evidence establishing in accordance with ITB Clause 3, Vol.-I of the Bidding Documents that the facility offered by us are eligible facilities and conform to the Bidding Documents has been furnished as Attachment 4 . Moreover, a list of Special Tools & Tackles to be furnished by us, the cost of which are included in our Bid Price, is also enclosed as per your format as Attachment- 4A. Further, a list of Special Tools & Tackles to be furnished by us, the cost of which are not included in our Bid Price as the same are to be taken back by us after completion, is also enclosed as per your format as Attachment- 4B. 25 th
(e) Attachment 5: The details of all major items of services or supply which we propose subletting in case of award, giving details of the name and nationality of the proposed subcontractor/sub-vendor for each item. 26 th
(f) Attachment 5A: (Items, Components, Raw Material, Services proposed to be sourced from Micro and Small Enterprises): The details of the items, components, raw material, services which is proposed to bought/availed from Micro and Small Enterprises for the purpose of completion of works.
(g) Attachment 6: The variation and deviations from the requirements of the Conditions of Contract, Bid Data Sheet and other commercial conditions, Technical Specification and Drawings (excluding critical provisions as mentioned at clause 6.0 below) in your format enclosed with the Bidding Documents, including, inter-alia, the cost of withdrawal of the variations and deviations indicated therein. 27 th
(h) Attachment 7: The details of Alternative Bids made by us indicating the complete Technical Specifications and the deviation to contractual and commercial conditions. [NOT APPLICABLE] 28 th
(i) Attachment 8: Manufacturer’s Authorisation Forms 29 th
(j) Attachment 9: Work Completion Schedule
(k) Attachment 10: Guarantee Declaration
(l) Attachment 11: Information regarding ex-employees of Employer in our firm
(m) Attachment 12: Filled up information regarding Price Adjustment Data as per the format enclosed in the bidding documents [Firm & Fixed]
(n) Attachment 13: Declaration regarding Social Accountability
(o) Attachment 14: Integrity Pact, in a separate envelope, duly signed on each page by the person signing the bid.
(p) Attachment 15: (Option for Initial Advance (either Interest Bearing Initial Advance or No Initial Advance) and Information for E-payment, PF details and declaration regarding Micro/Small & Medium Enterprises)
(q) Attachment 16: Additional information
(r) Attachment 17: Declaration for tax exemptions, reductions, allowances or benefits
(s) Attachment 18: Safety Pact
(t) Attachment 19: Declaration
(u) Attachment 19: Local Representation -The details of local representation as per your format enclosed in the Bidding Documents
(s) Attachment 20: Unequivocal consent of the proposed Associate(s) for the purpose of executing the ‘Second Contract’ and/ or ‘Third Contract’ as an independent Contractor (applicable to Foreign Bidders)
(v) Attachment 21: Capacity, Capability and Experience of Proposed Associate(s) (applicable to Foreign Bidders)
(v) Attachment 21: Affidavit of Self certification regarding Minimum Local Content in line with PPP-MII order and MoP Order December 2018, if applicable
(w) Attachment 22: Certificate from statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of Local Content, in line with PPP-MII order and MoP Order December 2018, if applicable
(x) Attachment 23: Compliance to the process related to the e-RA Terms & Conditions and the Business Rules governing the e-RA
(y) Attachment 24: Declaration by the Bidder and its proposed Associate regarding events encountered pursuant to ITB Clause 2.1 (All partners of the Joint Venture in case of Joint Venture bids)
2.2 We are a Micro and Small Enterprise (MSE) registered with
a designated Authority of GoI under the Public Procurement Policy for MSEs order 2012. 2
3.0 We are aware that, in line with Clause No. 24.0.0 (SCC), our Second Envelope (Price Part) is liable to be rejected in case the same contains any deviation/omission from the contractual and commercial conditions and technical Specifications other than those identified in this First Envelope.
3.0 A We are a Micro and Small Enterprise (MSE) registered with , a designated Authority of GoI under the Public Procurement Policy for MSEs order 2012. (Applicable only for MSE Bidder) 1
4.0 We confirm that except as otherwise specifically provided our Bid Prices in Second Envelope include all taxes, duties, levies and charges as may be assessed on us, our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.
4.1 100% of applicable Taxes and Duties i.e. GST, which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents.
4.3 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN, in all the states where the project is located and the states from which we shall make our supply of goods.
5.0 Construction of the Contract
5.1* We declare that we have studied GCC Sub-Clause 2.1 relating to mode of contracting for Foreign Bidders and we are making this proposal with a stipulation that you shall award us three separate Contracts viz ‘First Contract’ for all works to be performed in countries outside India covering, inter-alia, the Off-Shore Supply of equipment & materials including mandatory spares (CIF Supply), testing to be conducted aborad and training to be imparted abroad; ‘Second Contract’ for Supply of equipment & materials including mandatory spares (Ex-works Supply) and testing to be conducted within India; and ‘Third Contract’ for providing all services i.e. port handling and custom clearance of the imported goods; further loading and inland transportation for delivery at site, unloading, storage, handling at site, installation, testing and commissioning including Trial Operation in respect of all equipment & materials supplied under both ‘First Contract’ and ‘Second Contract’ and any other services specified in the Bidding Documents.
We declare that the award of three contracts, will not, in any way, dilute our responsibility for successful operation of Plant/Equipment and fulfillment of all obligations as per Bidding Documents and that all the three Contracts will have a cross-fall breach clause i.e. a breach in one Contract will automatically be classified as a breach of the remaining contracts which will confer on you the right to terminate the other contracts at our risk and cost and/or recover damages under any or all the Contracts.
# Further, M/s. Indicate the name of Associate here, if applicable., whose capacity, capability and experience are enclosed with our Bid as our Associate(s) for the purpose of executing the ‘Second Contract’ and / or the ‘Third Contract’ and written unequivocal consent of the above mentioned proposed Associate(s) to work as your independent Contractor, on the same terms and conditions as offered by us to you in this bid, is also enclosed with the Bid Form. We shall, however, be overall responsible for the execution of all the three Contracts. , whose capacity, capability and experience are enclosed with our Bid as our Associate(s) for the purpose of executing the ‘Second Contract’ and / or the ‘Third Contract’ and written unequivocal consent of the above mentioned proposed Associate(s) to work as your independent Contractor, on the same terms and conditions as offered by us to you in this bid, is also enclosed with the Bid Form. We shall, however, be overall responsible for the execution of all the three Contracts.
The above-mentioned proposed Associate(s) shall directly enter into the ‘Second Contract’ and/ or ‘Third Contract’ with you and all the three contracts shall contain the aforesaid cross-fall breach clause. It is expressly understood that in case of breach of the Second and/or Third Contract by the Associate(s), we shall be liable for all the consequences of breach thereof notwithstanding that the Contract is awarded to the Associate(s). In case the Associate(s), despite his written consent fails to enter into the ‘Second Contract’ and/or ‘Third Contract’ with you, or if the Employer in his judgment does not find acceptance of the proposed Associate(s) as its Contractor, then we undertake to enter into and execute all the Contracts, inter alia, containing the aforesaid cross-fall breach clause. In such an event, the over-all financial liability of the Employer, under the Contract shall, however, not exceed that envisaged in our this bid. (# Applicable only in case assignment is permitted by the Employer.)
5.1 We declare that we have studied Clause GCC 2.1 relating to mode of contracting for Domestic Bidders and we are making this proposal with a stipulation that you shall award us two separate Contracts viz ‘First Contract’ for ex-works supply of all equipment and materials including mandatory spares and ‘Second Contract’ for providing all the services i.e. inland transportation for delivery at site, In-transit insurance, unloading, handling at site, installation, testing and commissioning including Trial operation in respect of all the equipment supplied under the ‘First Contract’ and other services specified in the Contract Documents.
We declare that the award of two contracts, will not, in any way, dilute our responsibility for successful operation of plant/equipment and fulfillment of all obligations as per Bidding Documents and that both the Contracts will have a cross-fall breach clause i.e. a breach in one Contract will automatically be classified as a breach of the other contract which will confer on you the right to terminate the other contract at our risk and cost.
6.0 We have read the provisions of following clauses and confirm that the specified stipulations of these clauses are acceptable to us:
(a) SCC Clause No. 3.0.0 Bid Security
(b) SCC Clause No. 10.2 Governing Law
( c) SCC Clause No. 10.1 Contractor’s Responsibilities
(d) SCC Clause No. 10.0 Terms of Payment
(e) SCC Clause No. 12.0.0 Performance Security
(f) SCC Clause No. 11.0.0 Taxes and Duties
(g) SCC Clause No. 10.3 Completion Time Guarantee
(h) SCC Clause No. 16.0.0 Defect Liability
(i) SCC Clause No. 10.5 Functional Guarantee
(j) SCC Clause No. 10.6 Patent Indemnity
(k) SCC Clause No. 10.7 Limitation of Liability
(l) SCC Clause No. 29.0.0 Settlement of Disputes
(m) SCC Clause No. 29.0.0 Arbitration
(n) SCC Clause No. 7.0.0 Price Adjustment [Firm & Fixed]
Further we understand that deviation taken in any of the above clauses by us shall make our bid non-responsive as per provision of bidding documents and rejected by you.
7.0 We undertake, if our bid is accepted, to commence the work on Facilities immediately upon your Notification of Award to us, and to achieve delivery of goods and related services within the time stated in the Bidding Documents.
8.0 If our bid is accepted, we undertake to provide an Advance Payment Security and Performance Security(ies) in the form and amounts, and within the times specified in the Bidding Documents.
9.0 We agree to abide by this bid for a period of Six (06) months from the date fixed for submission of bids as stipulated in the Bidding Documents, and it shall remain binding upon us and may be accepted by you at any time before the expiration of that period.
10.0 Until a formal Contract is prepared and executed between us, this bid, together with your written acceptance thereof in the form of your Notification of Award shall constitute a binding contract between us.
11.0 We understand that you are not bound to accept the lowest or any bid you may receive.
12.0 Commissions or gratuties, if any, paid or to be paid by us to agents relating to this Bid, and to contract execution, if we are awarded the contract, are listed below:-
Name and Address of agent Amount and Currency Purpose of Commission or gratuity
(If none, state "none")
12.0 (for Joint Venture only) We, the partners of Joint Venture submitting this bid, do agree and confirm that in case of Award of Contract on the Joint Venture, we shall be jointly and severally liable and responsible for the execution of the Contract in accordance with Contract terms and conditions. 3
13.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.
Thanking you, we remain
Yours faithfully,
For and on behalf of : XXX
Date : 9-May-2023 Printed Name: La La La
Place : Shillong Designation : Za Za Za
Please provide additional information of the Bidder
Business Address :
Country of Incorporation :
(State/Province to be indicated)
Name of Principal Officer :
Address of Principal Officer :
Note: Bidders may note that no prescribed proforma has been enclosed for:
(a) Attachment 2: Power of Attorney.
(b) Attachment 7: The details of Alternative Bid
(For Attachments 2 and 7, Bidders may use their own proforma for furnishing the required information with the bid).
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) Attachment 3 (JV) Direct Total #REF! Micro and Small Enterprise (MSE) `
BO Total #REF! 0
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
Bidder’s Name and Address (MSE) : To: Sr. General Manager (C&M)
XXX Chief General Manager (C&M) Power Grid Corporation of India Limited
Name : XXX Power Grid Corporation of India Limited North Eastern Region
Address : YYY North Eastern Region Dongtieh, Lower Nongrah, Lapalang
ZZZ Dongtieh, Lower Nongrah, Lapalang Shillong – 793 006 (Meghalaya).
AAA Shillong – 793 006 (Meghalaya).
The Joint Venture Agreement (as per the proforma attached at no. 15 in Section-VI, Sample Forms and Procedures, Conditions of Contract, Vol.-I of the Bidding Documents) and Power of Attorney for Joint Venture (as per the proforma attached at no. 14 in Section-VI, Sample Forms and Procedures, Conditions of Contract, Vol.-I of the Bidding Documents) are enclosed herewith Micro and Small Enterprise (MSE)
Date : 9-May-2023 Printed Name : La La La
Place : Shillong Designation : Za Za Za
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) ATTACHMENT-3 (QR)
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(Qualifying Requirement Data)
Bidder’s Name and Address (MSE) : To:
XXX Sr. General Manager (C&M)
Name: XXX Power Grid Corporation of India Limited
Address: YYY North Eastern Region
ZZZ Dongtieh, Lower Nongrah, Lapalang
AAA Shillong – 793 006 (Meghalaya).
For Qualifying Requirement data, please refer Annexure-A (QR) of SCC separately enclosed
We are furnishing the following details/document in support of Qualifying requirement for the subject package.
A Attached copies of original documents defining :
a) The constitution or legal status;
b) The principal place of business;
c) The place of incorporation (for bidders who are corporations); or the place of registration and the nationality of the Owners (for applicants who are partnerships or individually-owned firms).
B Attached original & copies of the following documents :
a) Written power of attorney of the signatory of the Bid to commit the bidder.
b) Joint Venture Agreement.
1.0 GENERAL INFORMATION
Bidder is required to provide general information as per the following format.
[Where the Bidder proposes to use named subcontractor(s) for critical components of the works or for work contents in excess of ten (10) percent of the bid price, the following information should also be supplied for the subcontractor(s)].
S No. Particulars For Individual Firm
1 Name of the Firm
2 Head Office/ Registered Office Address
5 Contact Person
6 Place of Incorporation/ Registration
7 Year of Incorporation/ Registration
8 Nationality of
[Necessary documents to eatablish legal status of the bidder should be uploaded with the bid]
1.0 TECHNICAL REQUIREMENTS {Reference para 1.0 of Annexure-A (BDS)}
1.1 Bidder should have erected, tested and commissioned as a prime contractor* under a single contract , at least two (2) nos. Circuit Breaker equipped bays of 220kV or above voltage level in one substation or switchyard during last 7 years as on the originally scheduled date of bid opening i.e 18.04.2013 and these bays must be in operation as on the originally scheduled date of bid opening mentioned above and Note (*) : In case of works executed under a contract that had been awarded on a Joint Venture, the experience of individual Joint Venture partner shall be considered limited to the scope of that partner under the said contract.
1.1.1 the 345 kV Circuit breaker being offered are from manufacturer(s)
1.1.1(i) who have manufactured, type tested and supplied (i) (a) 345kV or above class Circuit Breaker of 40kA fault level which must be in operation for atleast two(2) years as on the originally scheduled date of bid opening mentioned above. provided further that: (i) (b) the offered 345kV class Circuit Breaker should have been, manufactured, type tested ( for 50kA ) & and which must be in operation as on the originally scheduled date of bid opening mentioned above. OR the offered 345kV class Circuit Breaker should have been manufactured and type tested (for 50 kA) as on the originally scheduled date of bid opening mentioned above and extended warranty of additional two (2) years over and above the warranty period specified for the package is given for the Circuit Breaker for which a declaration by the bidder is made in the bid. OR
1.1.1 (ii) who have manufactured, type tested and supplied 220kVor above class respective equipment(s) and have established its manufacturing facilities in india , based on technological support of a parent company or collaborator for the respective equipment provided that (a) the parent company (Principals) or collaborator (s) meets criteria stipulated under clause 1.1.1.(i)(a) & (b) mentioned above. Further the 345kV class respective equipment manufacturer shall furnish the following document alongwith the bid; (i) a legally enforceable undertaking (jointly with the parent company or collaborator) to guarantee quality, timely supply, performance and warranty obligations as specified for the equipment(s); and (ii) a confirmation letter from the parent company or collaborator alongwith the bid stating that parent company or collaborator shall furnish performance guarantee for an amount of 10 % of the ex-work cost of such equipment (s) . This performance guarantee shall be in addition to Contract Performance Guarantee to be submitted by the Bidder.
(iii) iii) The 345kV or above class shunt reactor manufacturer(s) furnishes
a) a legally enforceable undertaking (jointly with the parent company or collaborator) to guarantee quality, timely supply, performance and warranty obligations as specified for the equipment(s); and
b) a confirmation letter from the parent company or collaborator alongwith the bid stating that parent company or collaborator shall furnish performance guarantee for an amount of 10 % of the cost of such equipment (s) . This performance guarantee shall be in addition to Contract Performance Guarantee to be submitted by the Bidder
(iii) Both b) i) & b) ii) should have been in operation for at least two (2) years on the date of bid opening as mentioned above.
2.1.2 Indian 765kV Reactor Manufacturer
(i) The bidder should have manufactured in India, type tested 715 kV or higher voltage class one (1) number of three phase Reactor of at least 240 MVAR capacity Or A bank of three (3) single phase Reactors, each Reactor having a capacity of at least 80 MVAR
(ii) the above Reactor(s) should have been supplied as on the date of bid opening as mentioned above based on technological support of parent company / collaborator(s) / subsidiary provided that :
(a) Parent company / collaborator(s) / subsidiary meets the Technical Experience criteria stipulated in 1.1.(a) or 1.1.(b)
(b) A legally enforceable undertaking jointly by Bidder and the parent company / collaborator(s)/subsidiary (as per enclosed format in Section-VI, Vol.-I of bidding document) is furnished along with the bid, to guarantee quality, timely supply, performance and warranty obligations for five (5) years for entire quantity to be manufactured and supplied from the works in India and a confirmation letter from the parent company / collaborator/subsidiary along with the bid stating that parent company / collaborator/subsidiary shall furnish performance guarantee for an amount of 10% of the cost of such equipment(s). This performance guarantee shall be in addition to contract performance guarantee to be submitted by the bidder
[Further, for Joint Venture bidders, the requirement to be met is stipulated under para 3.0 of Annexure-A (BDS), Volume-I]
In case bidder is a holding company, the technical experience referred to in clause 1.1 above shall be of that holding company only (i.e excluding its subsidiary/ group companies). In case bidder is a subsidiary of a holding company, the technical experience referred to in clause 1.1 above shall be of that subsidiary company only ( i.e excluding its holding company)
1.2 Using the following format, the Bidder is requested to furnish details of previous experience against the requirements detailed at para 2.1.1 & 2.1.2 above, on the basis of which the Bidder wishes to qualify. The information is to be summarised using following format for each previous experience of the Bidder.
(The bidder shall attach documentary evidence, such as copies of utility certificates for completed contracts and copies of award letters etc. for ongoing contracts in support of his experience as listed in the following proforma for each Contract with the help of "Attach" Buttons provided in table given below).
Format for the Bidder (Single Firm / Partner in case of Joint Venture) [In case of Joint Venture bidder, the QR data of each of the partner (in support of meeting the requirement of para 1.3 of Annexure-A(BDS), Conditions of Contract, Volume-I of the bidding documents] is also is to furnished, as applicable, using this format
Name of the Bidder (Single Firm/Lead partner/Partners of a JV)
1 Name of Contract Undertaken
2 Contract Reference No. & Date of Award
3 Name and Address of the Employer/Utility for whom the Contract was executed by bidder/Parent Company (Principals)/ Collaborator
4(i) Name of sub-station or switchyard executed under the Contract
4(ii) Voltage level of sub-station or switchyard
No of circuit breaker equipped bays in sitchyard
Name of the substation or switchyard
Type of cooling in the above Reactor
5 Scope of work involved under the Contract
(Tick whichever is/are applicable)
6 Date of Commissioning of above Reactor
7 No. of years the above Shunt Reactor is in satisfactory operation as on the date of bid opening
Whether parent company / collaborator(s) / subsidiary meets the technical experience criteria stipulated at 2.1.1 (a) or 2.1.1 (b), and the details of which is mentioned at Format-A above. (Choose whichever is applicable from the drop down menu)
Whether legally enforceable undertaking jointly by Bidder and the parent company / collaborator(s)/subsidiary (as per format in the bidding document) is furnished along with the bid. (Choose whichever is applicable from the drop down menu) Yes
Confirmation letter from the Parent Company / Collaborator/Subsidiary along with the bid stating that Parent Company / Collaborator/Subsidiary shall furnish performance guarantee, in addition to contract performance guarantee to be submitted by the bidder, for an amount of 10% of the cost of equipment(s) to be manufactured and supplied from the works in India. (Choose whichever is applicable from the drop down menu) Yes
8 Details of documents uploaded in support of the above stated experience
Format B: Format for the bidders (Manufacturers) who wish to qualify through route 2.1.2:
Name of the Bidder (Manufacturer)
1 Whether the bidder is a 345kV class shunt reactors manufacturer, who has recently established production line in India for these equipment(s), based on technological support of a parent company or collaborator for 345kV class Shunt Reactor
2 Name of the parent company (Principals) or collaborator for 345kV class Shunt Reactor (The qualifying data for parent company (Principals) or collaborator for the Shunt Reactor shall be furnished in Format-A)
3 Date of Commissioning of above Reactors
4 Whether the 345kV class transformer or 220KV or above class shunt reactors manufacturer (bidder) has furnished:
(Tick whichever is/are applicable)
5 (a) a legally enforceable undertaking (jointly with the parent company or collaborator) to guarantee quality, timely supply, performance and warranty obligations as specified for the equipment(s); and YES
5 (b) a confirmation letter from the parent company or collaborator alongwith the bid stating that parent company or collaborator shall furnish performance guarantee for an amount of 10% of the ex-works cost of such equipment (s) [This performance guarantee shall be in addition to Contract Performance Guarantee to be submitted by the Bidder]. NO
6 Details of documents uploaded in support of the above stated experience
Format B: Format for the bidders (Manufacturers) who wish to qualify through route 2.1.2:
Name of the Bidder (Manufacturer)
1 Whether the bidder is a 345kV class shunt reactors manufacturer, who has recently established production line in India for these equipment(s), based on technological support of a parent company or collaborator for 345kV class Shunt Reactor
2 Name of the parent company (Principals) or collaborator for 345kV class Shunt Reactor (The qualifying data for parent company (Principals) or collaborator for the Shunt Reactor shall be furnished in Format-A)
3 Date of Commissioning of above Reactors
4 Whether the 345kV class transformer or 220KV or above class shunt reactors manufacturer (bidder) has furnished:
(Tick whichever is/are applicable)
5 (a) a legally enforceable undertaking (jointly with the parent company or collaborator) to guarantee quality, timely supply, performance and warranty obligations as specified for the equipment(s); and YES
5 (b) a confirmation letter from the parent company or collaborator alongwith the bid stating that parent company or collaborator shall furnish performance guarantee for an amount of 10% of the ex-works cost of such equipment (s) [This performance guarantee shall be in addition to Contract Performance Guarantee to be submitted by the Bidder]. NO
6 Details of documents uploaded in support of the above stated experience
3.0 FINANCIAL REQUIREMENTS :
3.1 Financial Position {Reference para 1.2 of Annexure-A (BDS)}
a) Minimum Average Annual Turnover *(MAAT) for best three years i.e 36 months out of last five financial years of the bidder should be Rs 876.38 million (Rs. 87.638 Crore) for the subject package.
* Note: Annual total income as incorporated in the profit and loss account except non-recurring income e.g. sale of fixed assets
b) Bidder shall have liquid assets (L.A.) or/and evidence of access to or availability of credit facilities of not less than Rs.146.06 million (Rs. 14.606 Crore) for subject package.
In case bidder is a holding company, MAAT & LA referred to in clause 3.1 (a) & (b) above shall be that of holding company only (i.e. excluding its subsidiary / group companies). In case bidder is a subsidiary of a holding company, MAAT & LA referred to in clause 3.1 (a) & (b) above shall be that of subsidiary company only (i.e. excluding its holding company).
[For Bidders to qualify for more than one package, their financial position shall not be less than the sum of the requirement for the packages they propose to quaify for.
{In support of its ‘Financial Position’, in line with the above, the Bidder must provide the relevant information, alongwith documentary evidence, in the following format}
3.2 Financial Qualification Data:
Name of the bidder
A Turnover details:
Turnover Details of documentary evidence submitted in support of Qualification Data
Turnover (in Millions)
Sl No Financial year
Do you have audited results for FY 2011-12 Yes
Average Annual Turnover for best Three Years is
*(Indicate the rate(s) of exchnage against US Dollar at the end of each year, which have been used for arriving the amount at equivalent US Dollar.)
B Liquid Assets
Details of evidence of having Liquid assets (LA)
Details of evidence of access to or availability of credit facilities
A Turnover details:
Turnover Equivalent US$ (in Million) exchange rate* Details of documentary evidence submitted in support of Qualification Data
Currency Turnover (in Millions)
Sl No Financial year
Do you have audited results for FY 2011-12 Yes
Average Annual Turnover for best Three Years is
*(Indicate the rate(s) of exchnage against US Dollar at the end of each year, which have been used for arriving the amount at equivalent US Dollar.)
B Liquid Assets
Currency LA Equivalent US$ (in Million)
Details of evidence of having Liquid assets (LA)
Details of evidence of access to or availability of credit facilities
A Turnover details:
Turnover Equivalent US$ (in Million) exchange rate* Details of documentary evidence submitted in support of Qualification Data
Currency Turnover (in Millions)
Sl No Financial year
Do you have audited results for FY 2011-12 Yes
Average Annual Turnover for best Three Years is
*(Indicate the rate(s) of exchnage against US Dollar at the end of each year, which have been used for arriving the amount at equivalent US Dollar.)
B Liquid Assets
Currency LA Equivalent US$ (in Million)
Details of evidence of having Liquid assets (LA)
Details of evidence of access to or availability of credit facilities
4.0 Joint Venture (JV) Firms {Reference para 3.0 of Annexure-A (BDS)}
A In case a bid is submitted by a Joint Venture(JV) of two or more firms as partners, the JV shall meet collectively the complete requirement mentioned at clause 2.0 & 3.0 above, further the partners of Joint Venture joint shall meet the following requirements :
a) The lead partner shall meet not less than 40% of the Financial Position minimum criteria given at para 2.0(a) & 2.0(b).
b) Each of the other partner(s) individually shall meet not less than 25% of the minimum Financial Position criteria given at para 3.0(a) & 3.0(b).
The figure of average annual turnover and liquid assets/credit facilities for each of the partners of the JV shall be added together to determine the JV’s compliance with the minimum qualifying criteria set out in para 3.0 (a) & 3.0 (b) above
However, for a JV to be qualified, the partner(s) of JV must also meet the following minimum criteria
(I) One of the partners(s) of JV shall meet the Technical Experience criteria stipulated under para 1.1(a) or 1.1(b)
(II) The remaining partner(s) of JV should be a Indian Transformer or Reactor Manufacturer and
(i) shall individually meet the criteria stipulated under 1.1 (a) or 1.1(b)
(ii) should have designed, manufactured, tested & supplied 345 kV or higher voltage class
(a) one (1) number of three phase Transformer of at least 200 MVA capacity OR a bank of three (3) single phase Transformers, each Transformer having a capacity of at least 67 MVA.
(b) should have designed, manufactured, tested & supplied 345 kV or higher voltage class one (1) number of three phase Reactor of at least 50 MVAR capacity OR A bank of three (3) single phase Reactors, each Reactor having a capacity of at least 16.7 MVAR.
(c ) The above transformer(s) and reactor(s) should have been supplied as on the date of bid opening and established manufacturing and testing facility in India for 765kV class Reactors provided that :-
(c )(i) Indian Transformer or Reactor Manufacturer enter into a valid technology transfer agreement for design, manufacturing, testing and supply of 765kV Reactor based on technological support with the other partner of JV who meets the Technical Experience criteria stipulated in 1.1.(a) or 1.1.(b) above
(c )(ii) A legally enforceable undertaking jointly by such Indian Transformer or Reactor Manufacturer(s) and partner of JV who meets the Technical Experience criteria stipulated in 1.1 above (as per enclosed format in Section-VI, ‘Sample Forms & Procedures (Forms), of Vol.-I’ of the bidding document) is furnished along with the bid, to guarantee quality, timely supply, performance and warranty obligations as specified, for the equipment(s) to be manufactured and supplied from the works of such Indian Manufacturer(s) in India
B In case of Joint Venture, the following conditions shall also apply:
i) the bid, and in case of successful bid, the specified Form of Agreement shall be signed so as to be legally binding on all partners (as per enclosed format in Section-VI, ‘Sample Forms & Procedures (Forms), of Vol.-I’ of the bidding document)
ii) one of the partners shall be nominated as Lead Partner, and the Lead Partner shall be authorized to incur liabilities and receive instructions for and on behalf of any and all partners of the Joint Venture, and the entire execution of the Contract shall be done with the Lead Partner and payment under the contract shall be received by the Lead Partner on behalf of the Joint Venture as per power conferred to him in the Power of Attorney. The authorization shall be evidenced by submitting a Power of Attorney signed by legally authorized signatory of all the partners as per Performa in section “Annexure” of Special Conditions of Contract, Vol-1A. The payment under the Contract can also be received by other partner(s) based on authorization of Lead Partner
iii) all partners of the Joint Venture shall be liable jointly and severally for the execution of the Contract in accordance with the Contract terms, and a statement to this effect shall be included in the authorization mentioned under (ii) above as well as in the Bid Form and in the Contract Form (in case of a successful bid)
iv) agreement entered into by the Joint Venture partners shall be submitted with the bid.
4.1 In accordance with the above, in case of JV bidders, it should be ensured that necessary details including those pertaining to each JV partner are furnished and the documents are submitted alongwith the bid. Further, the JV bidders should also ensure that other requirements are complied with. The lists of documents furnished are to be indicated below :
4.0 The Bidder shall also furnish following documents/details with its bid. {Reference ITB clause 9.3 (c)}
4.1 The complete annual reports together with Audited statement of accounts of the company for last five years of its own (separate) immediately preceding the date of submission of bid.
Note I. In the event the bidder is not able to furnish the information of its own (i.e separate), being a subsidiary company and its accounts are being consolidated with its group/holding/parent company, the bidder should submit the audited balance sheets, income statements, other information pertaining to it only (not of its group/Holding/Parent Company) duly certified by any one of the authority [ (i) Statutory Auditor of the bidder /(ii) Company Secretary of the bidder or (iii) A certified Public Accountant] certifying that such information/documents are based on the audited accounts as the case may be.
II. Similarly, if the bidder happens to be a Group/Holding/Parent Company, the bidder should submit the above documents/information of its own (i.e. exclusive of its subsidiaries) duly certified by any one of the authority mentioned in Note-I above certifying that these information/documents are based on the audited accounts, as the case may be.
4.2 The Bidder should accordingly also provide the following information/documents:
Audited balance sheet and income statements for the last five years as per the following:
Years preceding to the bid opening Audited Balance Sheet and Income Statements enclosed Audited Balance Sheet and Income Statements enclosed Audited Balance Sheet and Income Statements enclosed
1st Year Yes No Yes
2nd Year Yes Yes Yes
3rd Year Yes Yes Yes
4th Year Yes Yes Yes
5th Year Yes Yes Yes
Date : 9-May-2023 Printed Name : La La La
Place : Shillong Designation : Za Za Za
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) Attachment 4
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS. As per Lum-sum 0
As per lum-sum on Sch-2 0.00%
Bidder’s Name and Address (MSE) : To: As per Percent on Sch-2 #REF!
XXX Chief General Manager (C&M) Total Discount #REF!
Name : XXX Power Grid Corporation of India Limited
Address : YYY North Eastern Region
ZZZ Dongtieh, Lower Nongrah, Lapalang Multipackage Discount 0.00%
AAA Shillong – 793 006 (Meghalaya).
We hereby certify that equipment and materials to be supplied are produced in eligible source Equipments & Materials produced in [Name of countries] Company incorporated & registered in [Name of countries]
Date : 9-May-2023 Printed Name : La La La
Place : Shillong Designation : Za Za Za
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) ATTACHMENT-4 (B)
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(List of Special Maintenance Tools & Tackles)
Bidder’s Name and Address (MSE) : To:
XXX Chief General Manager (C&M)
Name : XXX Power Grid Corporation of India Limited
Address : YYY North Eastern Region
ZZZ Dongtieh, Lower Nongrah, Lapalang
AAA Shillong – 793 006 (Meghalaya).
We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles which are to be taken back after the completion of the work by us are not included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:
S.No. For Equipment Item Description Unit Quantity
Notwithstanding what is stated above, we further confirm that any additional special maintenance tools and tackles, required for the equipment under this package shall be furnished by us at no extra cost to the employer.
Date : 9-May-2023 Printed Name : La La La
Place : Shillong Designation : Za Za Za
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) ATTACHMENT-4 (B)
(List of Special Maintenance Tools & Tackles)
S.No. For Equipment Item Description Unit Quantity
Date : 9-May-2023 Printed Name : La La La
Place : Shillong Designation : Za Za Za
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) ATTACHMENT-4 (A)
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(List of Special Maintenance Tools & Tackles)
Bidder’s Name and Address (MSE) : To:
XXX Chief General Manager (C&M)
Name : XXX Power Grid Corporation of India Limited
Address : YYY North Eastern Region
ZZZ Dongtieh, Lower Nongrah, Lapalang
AAA Shillong – 793 006 (Meghalaya).
We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles are included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:
S.No. For Equipment Item Description Unit Quantity
Notwithstanding what is stated above, we further confirm that any additional special maintenance tools and tackles, required for the equipment under this package shall be furnished by us at no extra cost to the employer.
Date : 9-May-2023 Printed Name : La La La
Place : Shillong Designation : Za Za Za
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) ATTACHMENT-4 (A)
(List of Special Maintenance Tools & Tackles)
S.No. For Equipment Item Description Unit Quantity
Date : 9-May-2023 Printed Name : La La La
Place : Shillong Designation : Za Za Za
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) ATTACHMENT-5
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
( Sub-contracted Items)
Bidder’s Name and Address (MSE) : To:
XXX Chief General Manager (C&M)
Name : XXX Power Grid Corporation of India Limited
Address : YYY North Eastern Region
ZZZ Dongtieh, Lower Nongrah, Lapalang
AAA Shillong – 793 006 (Meghalaya).
1. We hereby furnish the details of the items/ sub-assemblies of supply or services i.e. items, whose price is more than 10% of the Bid Price, we propose to buy for the purpose of furnishing and installation of the subject Package :
Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details of the proposed sub-contractor/sub-vendor
Name Nationality
2. We hereby declare that we would not subcontract the erection portion of the contract withot prior approval of the Employer
3. In line with ITB Clause 9.3 (e), we intend to supply following items which are to be manufactured within Arunachal Pradesh
We futher declare that we would source material/services for atleast 30% of the Installation Price of Second /Services contract from within Arunachal Pradesh
Sl. No. Item Description Quantity proposed to be bought/ subcontracted Detail write up to engage local sub contractor/sub vendor
For additional write up, extra sheet may be attached to the bid.
Date : 9-May-2023 Printed Name : La La La
Place : Shillong Designation : Za Za Za
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) ATTACHMENT-5
(Bought-out & Sub-contracted Items)
Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details of the proposed sub-contractor/sub-vendor
Name Nationality
Date : 9-May-2023 Printed Name : La La La
Place : Shillong Designation : Za Za Za
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) ATTACHMENT-5(A)
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(Items, Components, Raw Material, Services proposed to be sourced from Micro and Small Enterprises)
Bidder’s Name and Address (MSE) : To:
XXX Chief General Manager (C&M)
Name : XXX Power Grid Corporation of India Limited
Address : YYY North Eastern Region
ZZZ Dongtieh, Lower Nongrah, Lapalang
AAA Shillong – 793 006 (Meghalaya).
1. We hereby furnish the details of the items, components, raw material, services which we propose to buy/avail from Micro and Small Enterprises (MSEs) for the purpose of completion of works under the package
Sl. No. Item Description Quantity proposed to be bought/sub-contracted Name of Micro and Small Enterprises (MSEs)
Name & Address Category
We hereby furnish the details of the items/ sub-assemblies propose to supply from our own works (i.e. as direct transactions) in additiona to the supplies the same from other vendors (i.e. as Bought-out transactions) as detailed in the table given above.
Sl. No. Item Description Quantity proposed to be supplied Details of the plant from where supplies are proposed.
Name of Plant Address
2. The above is a list of items we propose to procure from MSEs. However, based on the situations during the execution of the contract, the above list may undergo changes. We hereby confirm that the details regarding actual procurement from MSEs carried out by us, as per the format provided at Section VI, Forms and Procedures, Volume-I of bidding documents, shall be submitted along with the bills for payment against supplies made/works done during execution of contract. .
Date : 9-May-2023 Printed Name : La La La
Place : Shillong Designation : Za Za Za
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) ATTACHMENT-5(A)
(Bought-out & Sub-contracted Items)
Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details of the proposed sub-contractor/sub-vendor
Name Nationality
Date : 9-May-2023 Printed Name : La La La
Place : Shillong Designation : Za Za Za
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) ATTACHMENT-6
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(Alternative, Deviations and Exceptions to the Provisions)
Bidder’s Name and Address (MSE) : To:
XXX Chief General Manager (C&M)
Name : XXX Power Grid Corporation of India Limited
Address : YYY North Eastern Region
ZZZ Dongtieh, Lower Nongrah, Lapalang
AAA Shillong – 793 006 (Meghalaya).
The bidder shall itemize any deviation from the Specifications included in his bid. Each item shall be listed (separate sheets may be used and enclosed with this Attachment) with the following information:
Sl. No. Reference clause in the Specifications Deviation Reason for change The cost of Withdrawal of the Deviation
Any proposed deviation will be applicable only for the bidder whose bid is substantially responsive in accordance with Clause 22, Section ITB, Vol. I of the bidding documents. If a bid is not substantially responsive, it will be rejected and may not subsequently be made responsive by the bidder by correction of the non-conformity.
The above deviations and variations are exhaustive. We confirm that we shall withdraw the deviations proposed by us at the cost of withdrawal indicated in this attachment, failing which our bid may be rejected and Bid Security forfeited.
Date : 9-May-2023 Printed Name : La La La
Place : Shillong Designation : Za Za Za
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) ATTACHMENT-6
(Alternative, Deviations and Exceptions to the Provisions)
Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation
Date : 9-May-2023 Printed Name : La La La
Place : Shillong Designation : Za Za Za
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) Attachment-8
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(Work Completion Schedule)
Bidder’s Name and Address (MSE) :
Name : XXX Chief General Manager (C&M)
Address : YYY Power Grid Corporation of India Limited
ZZZ North Eastern Region
AAA Dongtieh, Lower Nongrah, Lapalang
Shillong – 793 006 (Meghalaya).
We hereby declare that the following Work Completion Schedule shall be followed by us in furnishing and installation of the subject Package for the period commencing from the effective date of Contract to us:
Sl. No. Description of Work Period in Months from the effective date of Contract
1 Detailed Engineering and drawing submission a) commencement
2 Procurement of equipment/ components & assembly a) commencement
3 Type Tests a) commencement
4 Manufacturing a) commencement
5 Shipments & Delivery a) commencement
6 Establishment of site office
7 Installation at Site a) commencement
8 Testing & Pre-commissioning a) commencement
9 Trial Operation a) commencement
Date : 9-May-2023 Printed Name : La La La
Place : Shillong Designation : Za Za Za
Note: Bidders to enclose a detailed network covering all the activities to be undertaken for completion of the project indicating key dates for various milestones for each phase constituent-wise
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) ATTACHMENT-10
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(Guarantee Declaration)
Bidder’s Name and Address : To:
0 Contract Services
Name : XXX Power Grid Corporation of India Ltd.,
Address : YYY "Saudamini", Plot No. 2, Sector 29
ZZZ Gurgaon (Haryana) - 122001
We hereby declare that this Attachment of 'Guarantee Declaration' is furnished by us in Second Envelope of bid.
Date : 9-May-2023 Printed Name : La La La
Place : Shillong Designation : Za Za Za
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) ATTACHMENT-9
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(Guarantee Declaration/Defect Liability)
Bidder’s Name and Address (MSE) : To:
XXX Chief General Manager (C&M)
Name : XXX Power Grid Corporation of India Limited
Address : YYY North Eastern Region
ZZZ Dongtieh, Lower Nongrah, Lapalang
AAA Shillong – 793 006 (Meghalaya).
We declare that the ratings, performance figures and availability of the system furnished by us for subject Package covered under this specification are guaranteed by us. We further declare that in the event of any deficiencies in meeting the guarantees in respect of the characteristics mentioned below as established after conducting the factory test, you may at your discretion, reject or accept the equipment after assessing the liquidated damages as specified in the relevant clauses of Bid document.
Equipment Guaranteed losses at rated output (KW) per Unit (applicable for each item/unit of the facilities)
Copper loss (kW) Iron loss (kW)
5 MVA, (132/√3)/ (33/√3) kV 1-Phase Power Transformer
The criteria for acceptance of guaranteed performance or efficiency of 5 MVA, (132/√3)/ (33/√3) kV 1-Phase Power Transformer as specified in Technical Specifications, shall be “Copper Loss (Load Loss)> Iron Loss (No Load Loss)” failing which bid shall be considered non-responsive.
Equipment Total Loss (kW)
5 MVAR, (145/√3) kV 1-Phase Bus Reactor
Date : 9-May-2023 Printed Name : La La La
Place : Shillong Designation : Za Za Za
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) ATTACHMENT-10
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(Information regarding Ex-employees of POWERGRID in our Organisation)
Bidder’s Name and Address (MSE) : To:
XXX Chief General Manager (C&M)
Name : XXX Power Grid Corporation of India Limited
Address : YYY North Eastern Region
ZZZ Dongtieh, Lower Nongrah, Lapalang
AAA Shillong – 793 006 (Meghalaya).
We declare that we are aware of and have gone through the “Code of Business Conduct and Ethics for Senior Management Personnel”1 and “Code of Business Conduct and Ethics for Board Members”1 of POWERGRID (hereinafter referred to as the “Code of Conduct”). We further understand that as per the “Code of Conduct”, Senior Management Personnel including Board Members, who have retired/resigned from POWERGRID, shall not accept any appointment or post, as detailed in the referred “Code of Conduct”, within 1 year from the date of cessation of service/directorship unless approved by the Competent Authority. Accordingly, we hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:
Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation
*In case the date of joining in the bidder’s organization of such ex-employee is within 1 year from the date of retirement/resignation from POWERGRID, No Objection Certificate/ approval from the Competent Authority must be furnished along with the bid or subsequent through clarification pursuant to ITB Clause 21.
In case of non-submission of No Objection Certificate/approval of the Competent Authority, as required, We understand that POWERGRID shall deal with such cases as per its Policy and procedures in vogue, which may also result in rejection of our bid. We also confirm that POWERGRID shall be the sole judge in this regard. We further declare that any misrepresentation or submission of false/forged documents/information in this regard shall be dealt with as per the provisions of the Integrity Pact and/or the Bidding Documents and/or POWERGRID’s policy and procedures.
Date : 9-May-2023 Printed Name : La La La
Place : Shillong Designation : Za Za Za
Note: 1. “Code of Business Conduct and Ethics for Senior Management Personnel” and “Code of Business Conduct and Ethics for Board Members” are available on POWERGRID’s website https://www.powergridindia.com. 2. The information in similar format should be furnished for each partner of joint venture in case of joint venture bid. 3. In case bidder has furnished no details on ex-employees of POWERGRID or has left blank or has indicated ‘-‘ against the same, it shall be deemed that they have not employed any such person in their organization.
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) ATTACHMENT-10
(Information regarding Ex-employees of POWERGRID in our Organisation)
Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation
Date : 9-May-2023 Printed Name :
Place : Shillong Designation :
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) ATTACHMENT-10
(Information regarding Ex-employees of POWERGRID in our Organisation)
Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation
Date : 9-May-2023 Printed Name :
Place : Shillong Designation :
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) ATTACHMENT-13
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(Declaration regarding Social Accountability)
Bidder’s Name and Address (MSE) : To:
XXX Chief General Manager (C&M)
Name : XXX Power Grid Corporation of India Limited
Address : YYY North Eastern Region
ZZZ Dongtieh, Lower Nongrah, Lapalang
AAA Shillong – 793 006 (Meghalaya).
We conform that we stand committed to comply to all requirements of Social Accountability Standards i.e., SA8000 (latest Standard available at www.sa-intl.org) and maintain the necessary records.
Date : 9-May-2023 Printed Name : La La La
Place : Shillong Designation : Za Za Za
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) ATTACHMENT-14
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
Bidder’s Name and Address (MSE) : To:
XXX Chief General Manager (C&M)
Name : XXX Power Grid Corporation of India Limited
Address : YYY North Eastern Region
ZZZ Dongtieh, Lower Nongrah, Lapalang
AAA Shillong – 793 006 (Meghalaya).
Integrity Pact is annexed herewith this Volume.
Date : 9-May-2023 Printed Name : La La La
Place : Shillong Designation : Za Za Za
Instruction for printing & submitting Integrity Pact
1. The requisite format of Integrity Pact is getting generated automatically and displayed here below.
2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other seven pages on plain A4 size paper. Such two sets shall be prepared by the bidder.
3. All the pages of both the copies of the Integrity Pact shall be signed by the authorised representative of the bidder and duly stamped.
4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.
5. For further details bidders may please refer ITB Clause 9.3 (o).
Between #REF! #REF!
Power Grid Corporation of India Limited #REF! #REF!
having its Registered Office at B-9, Qutab Institutional Area, Katwaria Sarai, New Delhi – 110016 hereinafter referred to as #REF! #REF!
"POWERGRID", #REF! #REF!
XXX 1 having its Registered Office at ,
having its Registered Office at YYY ZZZ AAA 1 AND
having its Registered Office at FALSE
hereinafter referred to as
"The Bidder/Contractor"
POWERGRID intends to award, under laid-down organisational procedures, contract(s) for Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Integrity Pact Page 1 of 8
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS. Package and Specification Number Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) POWERGRID values full compliance with all relevant laws and regulations, and the principles of economical use of resources, and of fairness and transparency in its relations with its Bidders/ Contractors.
In order to achieve these goals, POWERGRID and the above named Bidder/Contractor enter into this agreement called 'Integrity Pact' which will form a part of the bid.
It is hereby agreed by and between the parties as under:
Section I - Commitments of POWERGRID
(1) POWERGRID commits itself to take all measures necessary to prevent corruption and to observe the following principles :
a) No employee of POWERGRID, personally or through family members, will in connection with the tender, or the execution of the contract, demand, take a promise for or accept, for him/herself or third person, any material or other benefit which he/she is not legally entitled to.
b) POWERGRID will, during the tender process treat all Bidder(s) with equity and fairness. POWERGRID will in particular, before and during the tender process, provide to all Bidder(s) the same information and will not provide to any Bidder(s) confidential/ additional information through which the Bidder(s) could obtain an advantage in relation to the tender process or the contract execution.
c) POWERGRID will exclude from evaluation of Bids its such employee(s) who has any personnel interest in the Companies/Agencies participating in the Bidding/Tendering process.
(2) If Chairman and Managing Director obtains information on the conduct of any employee of POWERGRID which is a criminal offence under the relevant Anti-Corruption Laws of India, or if there be a substantive suspicion in this regard, he will inform its Chief Vigilance Officer and in addition can initiate disciplinary actions under its Rules.
Section II - Commitments of the Bidder/Contractor
(1) The Bidder/Contractor commits himself to take all measures necessary to prevent corruption. He commits himself to observe the following principles
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Integrity Pact Page 2 of 8
during his participation in the tender process and during the contract execution :
a) The Bidder/Contractor will not, directly or through any other person or firm, offer, promise or give to POWERGRID, or to any of POWERGRID's employees involved in the tender process or the execution of the contract or to any third person any material or other benefit which he/she is not legally entitled to, in order to obtain in exchange an advantage during the tender process or the execution of the contract.
b) The Bidder/Contractor will not enter into any illegal agreement or understanding, whether formal or informal with other Bidders/Contractors. This applies in particular to prices, specifications, certifications, subsidiary contracts, submission or non-submission of bids or actions to restrict competitiveness or to introduce cartelization in the bidding process.
c) The Bidder/Contractor will not commit any criminal offence under the relevant Anti-corruption Laws of India; further, the Bidder/Contractor will not use for illegitimate purposes or for purposes of restrictive competition or personal gain, or pass on to others, any information provided by POWERGRID as part of the business relationship, regarding plans, technical proposals and business details, including information contained or transmitted electronically.
d) The Bidder/Contractor of foreign origin shall disclose the name and address of the Agents/representatives in India, if any, involved directly or indirectly in the Bidding. Similarly, the Bidder/Contractor of Indian Nationality shall furnish the name and address of the foreign principals, if any, involved directly or indirectly in the Bidding.
e) The Bidder/Contractor will, when presenting his bid, disclose any and all payments he has made, or committed to or intends to make to agents, brokers or any other intermediaries in connection with the award of the contract and/or with the execution of the contract.
f) The Bidder/Contractor will not misrepresent facts or furnish false/forged documents/informations in order to influence the bidding process or the execution of the contract to the detriment of POWERGRID.
(2) The Bidder/Contractor will not instigate third persons to commit offences outlined above or be an accessory to such offences.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Integrity Pact Page 3 of 8
Section III- Disqualification from tender process and exclusion from future contracts
(1) If the Bidder, before contract award, has committed a serious transgression through a violation of Section II or in any other form such as to put his reliability or credibility as Bidder into question, POWERGRID may disqualify the Bidder from the tender process or terminate the contract, if already signed, for such reason.
(2) If the Bidder/Contractor has committed a serious transgression through a violation of Section II such as to put his reliability or credibility into question, POWERGRID may after following due procedures also exclude the Bidder/Contractor from future contract award processes. The imposition and duration of the exclusion will be determined by the severity of the transgression. The severity will be determined by the circumstances of the case, in particular the number of transgressions, the position of the transgressors within the company hierarchy of the Bidder/Contractor and the amount of the damage. The exclusion will be imposed for a minimum of 12 months and maximum of 3 years.
(3) If the Bidder/Contractor can prove that he has restored/recouped the damage caused by him and has installed a suitable corruption prevention system, POWERGRID may revoke the exclusion prematurely.
Section IV - Liability for violation of Integrity Pact
(1) If POWERGRID has disqualified the Bidder from the tender process prior to the award under Section III, POWERGRID may forfeit the Bid Guarantee under the Bid.
(2) If POWERGRID has terminated the contract under Section III, POWERGRID may forfeit the Contract Performance Guarantee of this contract besides resorting to other remedies under the contract.
Section V- Previous Transgression
(1) The Bidder shall declare in his Bid that no previous transgressions occurred in the last 3 years with any other Public Sector Undertaking or Government Department that could justify his exclusion from the tender process.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Integrity Pact Page 4 of 8
(2) If the Bidder makes incorrect statement on this subject, he can be disqualified from the tender process or the contract, if already awarded, can be terminated for such reason.
Section VI - Equal treatment to all Bidders / Contractors
(1) POWERGRID will enter into agreements with identical conditions as this one with all Bidders.
(2) POWERGRID will disqualify from the tender process any bidder who does not sign this Pact or violate its provisions.
Section VII - Punitive Action against violating Bidders / Contractors
If POWERGRID obtains knowledge of conduct of a Bidder or a Contractor or his subcontractor or of an employee or a representative or an associate of a Bidder or Contractor or his Subcontractor which constitutes corruption, or if POWERGRID has substantive suspicion in this regard, POWERGRID will inform the Chief Vigilance Officer (CVO).
(*)Section VIII - Independent External Monitor/Monitors
(1) POWERGRID has appointed a panel of Independent External Monitors (IEMs) for this Pact with the approval of Central Vigilance Commission (CVC), Government of India, out of which one of the IEMs has been indicated in the NIT/IFB.
(2) The IEM is to review independently and objectively, whether and to what extent the parties comply with the obligations under this agreement. He has right of access to all project documentation. The IEM may examine any complaint received by him and submit a report to Chairman-cum-Managing Director, POWERGRID, at the earliest. He may also submit a report directly to the CVO and the CVC, in case of suspicion of serious irregularities attracting the provisions of the PC Act. However, for ensuring the desired transparency and objectivity in dealing with the complaints arising out of any tendering process, the matter shall be referred to the full panel of IEMs, who would examine the records, conduct the investigations and submit report to Chairman-cum-Managing Director, POWERGRID, giving joint findings.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Integrity Pact Page 5 of 8
(3) The IEM is not subject to instructions by the representatives of the parties and performs his functions neutrally and independently. He reports to the Chairman-cum-Managing Director, POWERGRID.
(4) The Bidder(s)/Contractor(s) accepts that the IEM has the right to access without restriction to all documentation of POWERGRID related to this contract including that provided by the Contractor/Bidder. The Bidder/Contractor will also grant the IEM, upon his request and demonstration of a valid interest, unrestricted and unconditional access to his documentation. The same is applicable to Subcontractors. The IEM is under contractual obligation to treat the information and documents of the Bidder(s)/Contractor(s)/Subcontractor(s) with confidentiality.
(5) POWERGRID will provide to the IEM information as sought by him which could have an impact on the contractual relations between POWERGRID and the Bidder/Contractor related to this contract.
(6) As soon as the IEM notices, or believes to notice, a violation of this agreement, he will so inform the Chairman-cum-Managing Director, POWERGRID and request the Chairman-cum-Managing Director, POWERGRID to discontinue or take corrective action, or to take other relevant action. The IEM can in this regard submit non-binding recommendations. Beyond this, the IEM has no right to demand from the parties that they act in a specific manner, refrain from action or tolerate action. However, the IEM shall give an opportunity to POWERGRID and the Bidder/Contractor, as deemed fit, to present its case before making its recommendations to POWERGRID.
(7) The IEM will submit a written report to the Chairman-cum-Managing Director, POWERGRID within 8 to 10 weeks from the date of reference or intimation to him by POWERGRID and, should the occasion arise, submit proposals for correcting problematic situations.
(8) If the IEM has reported to the Chairman-cum-Managing Director, POWERGRID, a substantiated suspicion of an offence under relevant Anti-Corruption Laws of India, and the Chairman-cum-Managing Director, POWERGRID has not, within the reasonable time taken visible action to proceed against such offence or reported it to the CVO, the Monitor may also transmit this information directly to the CVC, Government of India.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Integrity Pact Page 6 of 8
(9) The word ‘IEM’ would include both singular and plural.
(*) This Section shall be applicable for only those packages wherein the IEMs have been identified in Section – I : Invitation for Bids and/or Clause ITB 9.3 in Section – III: Bid Data Sheets of Conditions of Contract, Volume-I of the Bidding Documents.
Section IX - Pact Duration
This Pact begins when both parties have legally signed it. It expires for the Contractor after the closure of the contract and for all other Bidder's six month after the contract has been awarded.
Section X - Other Provisions
(1) This agreement is subject to Indian Law. Place of performance and jurisdiction is the establishment of POWERGRID. The Arbitration clause provided in the main tender document / contract shall not be applicable for any issue / dispute arising under Integrity Pact.
(2) Changes and supplements as well as termination notices need to be made in writing.
(3) If the Contractor is a partnership firm or a consortium or Joint Venture, this agreement must be signed by all partners, consortium members and Joint Venture partners.
(4) Nothing in this agreement shall affect the rights of the parties available under the General Conditions of Contract (GCC) and Special Conditions of Contract (SCC).
(5) Views expressed or suggestions/submissions made by the parties and the recommendations of the CVO/IEM# in respect of the violation of this agreement, shall not be relied on or introduced as evidence in the arbitral or judicial proceedings (arising out of the arbitral proceedings) by the parties in connection with the disputes/differences arising out of the subject contract.
# CVO shall be applicable for packages wherein IEM are not identified in Section IFB/BDS of Condition of Contract, Volume-I. IEM shall be applicable for packages wherein IEM are identified in Section IFB/BDS of Condition of Contract, Volume-I.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Integrity Pact Page 7 of 8
(6) Should one or several provisions of this agreement turn out to be invalid, the remainder of this agreement remains valid. In this case, the parties will strive to come to an agreement to their original intentions.
Signature Signature
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
(Office Seal) (Office Seal)
Designation : Designation :
Witness 1 : Witness 1 :
Designation : Designation :
Witness 1 : Witness 1 :
Designation : Designation :
Integrity Pact Page 8 of 8
Instruction for printing & submitting Integrity Pact
1. The requisite format of Integrity Pact is getting generated automatically and displayed here below.
2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other seven pages on plain A4 size paper. Such two sets shall be prepared by the bidder.
3. All the pages of both the copies of the Integrity Pact shall be signed by the authorised representative of the bidder and duly stamped.
4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.
5. For further details bidders may please refer SCC-Vol-IA
Power Grid Corporation of India Limited
having its Registered Office at B-9, Qutab Institutional Area, Katwaria Sarai,New Delhi – 110016 hereinafter referred to as
having its Registered Office at YYY ZZZ AAA
having its Registered Office at FALSE
hereinafter referred to as
"The Bidder/Contractor"
POWERGRID intends to award, under laid-down organisational procedures, contract(s) for Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS. , Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB)
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Integrity Pact Page 1 of 8
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS. Package and Specification Number Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB). POWERGRID values full compliance with all relevant laws of the land, rules, regulations, economic use of resources, and of fairness / transparency in its relations with its Bidders/ Contractors.
In order to achieve these goals, POWERGRID and the above named Bidder/Contractor enter into this agreement called 'Integrity Pact' which will form a part of the bid.
It is hereby agreed by and between the parties as unde r:
Section I - Commitments of POWERGRID
(1) POWERGRID commits itself to take all measures necessary to prevent corruption and to observe the following principles :
a) No employee of POWERGRID, personally or through family members, will in connection with the tender, or the execution of the contract, demand, take a promise for or accept, for him/herself or third person, any material or other benefit which he/she is not legally entitled to.
b) POWERGRID will, during the tender process treat all Bidder(s) with equity, fairness and reason. POWERGRID will in particular, before and during the tender process, provide to all Bidder(s) the same information and will not provide to any Bidder(s) confidential/ additional information through which the Bidder(s) could obtain an advantage in relation to the tender process or the contract execution.
c) POWERGRID will exclude from evaluation of Bids its such employee(s) who has any personal interest in the Companies/Agencies participating in the Bidding/Tendering process and all known prejudiced persons.
(2) If POWERGRID obtains information on the conduct of any of its employee which is a criminal offence under the IPC / PC Act , or if there be a substantive suspicion in this regard, POWERGRID will inform its Chief Vigilance Officer and in addition disciplinary actions can be initiated under POWERGRID’s Rules.
Section II - Commitments of the Bidder/Contractor
(1) The Bidder/Contractor commits itself to take all measures necessary to prevent corruption. The Bidder/Contractor commits itself to observe the following principles during its participation in the tender process and during the contract execution:
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Integrity Pact Page 2 of 8
a) The Bidder/Contractor will not, directly or through any other person or firm, offer, promise or give to any of POWERGRID's employees involved in the tender process or the execution of the contract or to any third person any material or other benefit which it is not legally entitled to, in order to obtain in exchange an advantage of any kind whatsoever during the tender process or during the execution of the contract.
b) The Bidder/Contractor will not enter into any illegal or undisclosed agreement or understanding, whether formal or informal with other Bidders/Contractors. This applies in particular to prices, specifications, certifications, subsidiary contracts, submission or non-submission of bids or actions to restrict competitiveness or to introduce cartelization in the bidding process.
c) The Bidder/Contractor shall not pass any information provided by POWERGRID as part of business relationship to others and shall not commit any offence under PC / IPC Act.
d) The Bidder/Contractor of foreign origin shall disclose the name and address of the Agents/representatives in India, if any, involved directly or indirectly in the Bidding. Similarly, the Bidder/Contractor of Indian Nationality shall furnish the name and address of the foreign principals, if any, involved directly or indirectly in the Bidding.
e) The Bidder/Contractor will, when presenting his bid, disclose any and all payments made, or committed to or intends to make to agents, brokers or any other intermediaries in connection with the award of the contract and/or with the execution of the contract.
f) The Bidder/Contractor will not misrepresent facts or furnish false/forged documents/information in order to influence the bidding process or the execution of the contract to the detriment of POWERGRID.
g) The Bidder/Contractor shall ensure adoption of Integrity Pact by its Sub-contractors and shall be responsible for the same.
(2) The Bidder/Contractor will not instigate third persons to commit offences outlined above or be an accessory to such offences.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Integrity Pact Page 3 of 8
Section III- Disqualification from tender process and exclusion from future contracts
(1) If the Bidder, before contract award, has committed a transgression through a violation of Section II or in any other form such as to put his reliability or credibility as Bidder into question, POWERGRID may disqualify the Bidder from the tender process or terminate the contract, if already signed, for such reason.
(2) If the Bidder/Contractor has committed a transgression through a violation of Section II such as to put his reliability or credibility into question, POWERGRID may, after following due procedures, ban /blacklist the Bidder/Contractor in line with POWERGRID’s policy for “Black-Listing of Firms / Banning of Business”. The imposition and duration of the ban will be determined by the severity of the transgression. The severity will be determined by the circumstances of the case, in particular the number of transgressions, the position of the transgressors within the company hierarchy of the Bidder/Contractor and the amount of the damage. The ban will be imposed for a maximum of 3 years.
(3) If the Bidder/Contractor can prove that he has restored/recouped the damage caused by him and has installed a suitable corruption prevention system, POWERGRID may revoke the ban prematurely.
Section IV - Liability for violation of Integrity Pact
(1) If POWERGRID has disqualified the Bidder from the tender process prior to the award under Section III, POWERGRID is entitled for forfeiture of the Bid Guarantee under the Bid.
(2) If POWERGRID has terminated the contract under Section III or if POWERGRID is entitled to terminate the contract under Section III, POWERGRID shall be entitled to forfeit the Contract Performance Guarantee of this contract, in full or part thereof as may be decided, besides resorting to other remedies under the contract.
Section V- Previous Transgression
(1) The Bidder shall disclose in its Bid any transgressions occurred in the last 10 years with any other Public Sector Undertaking or Government Department or any other Company, in any country, that may impinge on the Anti-corruption principle.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Integrity Pact Page 4 of 8
(2) If the Bidder makes incorrect statement on this subject, it can be disqualified from the tender process or the contract, if already awarded, can be terminated for such reason and further action can be taken in line with POWERGRID’s policies.
Section VI - Equal treatment to all Bidders / Contractors
(1) POWERGRID will enter into agreements with identical conditions as this one with all Bidders.
(2) POWERGRID will disqualify from the tender process any bidder who does not sign this Pact or violate its provisions.
Section VII - Punitive Action against violating Bidders / Contractors
If POWERGRID obtains knowledge of conduct of a Bidder or a Contractor or its subcontractor or of an employee or a representative or an associate of a Bidder or Contractor or his Subcontractor which constitutes corruption, or if POWERGRID has substantive suspicion in this regard, POWERGRID will inform the Chief Vigilance Officer (CVO).
(*)Section VIII - Independent External Monitor/Monitors
(1) POWERGRID has appointed a panel of Independent External Monitors (IEMs) for this Pact with the approval of Central Vigilance Commission (CVC), Government of India. The names of the IEMs have been indicated in the Bidding Documents.
(2) The panel of IEMs shall review independently and objectively, whether and to what extent the parties comply with the obligations under this agreement. The panel of IEMs has right of access to all project documentation. The panel of IEMs may examine any complaint received by them and submit a report to Chairman-cum-Managing Director, POWERGRID, giving joint findings, at the earliest. The panel of IEMs may also submit a report directly to the CVO and the CVC, in case of suspicion of serious irregularities attracting the provisions of the PC Act.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Integrity Pact Page 5 of 8
(3) The IEM is not subject to instructions by the representatives of the parties and performs his functions neutrally and independently. He / She reports to the Chairman-cum-Managing Director, POWERGRID.
(4) The Bidder(s)/Contractor(s) accepts that the IEM has the right to access without restriction to all documentation of POWERGRID related to this contract including that provided by the Contractor/Bidder. The Bidder/Contractor will also grant the IEM, upon his / her request and demonstration of a valid interest, unrestricted and unconditional access to their documentation. The same is applicable to Subcontractors. The IEM is under contractual obligation to treat the information and documents of the Bidder(s)/Contractor(s)/Subcontractor(s) with confidentiality.
(5) POWERGRID will provide to the IEMs information as sought by him / her which could have an impact on the contractual relations between POWERGRID and the Bidder/Contractor related to this contract. The IEMs shall also sign declaration on ’Non-Disclosure of Confidential Information’ and of ‘Absence of Conflict of Interest’. In case of any conflict of interest arising at a later date, the IEM shall inform Chairman-cum-Managing Director, POWERGRID and recuse himself/herself from that case
(6) As soon as the IEM notices, or believes to notice, a violation of this agreement, he / she will so inform the Chairman-cum-Managing Director, POWERGRID and request the Chairman-cum-Managing Director, POWERGRID to discontinue or take corrective action, or to take other relevant action. The IEM can in this regard submit non-binding recommendations. Beyond this, the IEM has no right to demand from the parties that they act in a specific manner, refrain from action or tolerate action. However, the IEM shall give an opportunity to POWERGRID and the Bidder/Contractor, as deemed fit, to present its case before making its recommendations to POWERGRID.
(7) The IEM will submit a written report to the Chairman-cum-Managing Director, POWERGRID within 8 to 10 weeks from the date of reference or intimation to him by POWERGRID and, should the occasion arise, submit proposals for correcting problematic situations.
(8) If the IEM has reported to the Chairman-cum-Managing Director, POWERGRID, a substantiated suspicion of an offence under PC / IPC Act, and the Chairman-cum-Managing Director, POWERGRID has not, within the reasonable time taken visible action to proceed against such offence or reported it to the CVO, the Monitor may also transmit this information directly to the CVC, Government of India.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Integrity Pact Page 6 of 8
(9) While representing any matter in relation to the Integrity pact inter-alia including its transgression to the panel of IEMs, POWERGRID and Bidder/Contractor shall not approach the court of law and await the decision of the IEM in the matter.
(10) The word ‘IEM’ would include both singular and plural.
(*) This Section shall be applicable for only those packages wherein the IEMs have been identified in Section – I : Invitation for Bids and/or Clause ITB 9.3 in Section – III: Bid Data Sheets of Conditions of Contract, Volume-I of the Bidding Documents.
Section IX - Pact Duration
This Pact begins when both parties have legally signed it. It expires for the Contractor after the closure of the contract and for all other Bidder's six month after the contract has been awarded.
Section X - Other Provisions
(1) This agreement is subject to Indian Law. Place of performance and jurisdiction is the establishment of POWERGRID. The Arbitration clause provided in the main tender document / contract shall not be applicable for any issue / dispute arising under Integrity Pact.
(2) Changes and supplements as well as termination notices need to be made in writing. Side agreements have not been made.
(3) If the Contractor is a partnership firm or a consortium or Joint Venture, this agreement must be signed by all partners, consortium members and Joint Venture partners.
(4) Nothing in this agreement shall affect the rights of the parties available under the General Conditions of Contract (GCC) and Special Conditions of Contract (SCC).
(5) Issues like Warranty/Guarantees etc. shall be outside the purview of IEMs.
(6) Views expressed or suggestions/submissions made by the parties and the recommendations of the CVO/IEM# in respect of the violation of this agreement, shall not be relied on or introduced as evidence in the arbitral or judicial proceedings (arising out of the arbitral proceedings) by the parties in connection with the disputes/differences arising out of the subject contract.
# CVO shall be applicable for packages wherein IEM are not identified in Section IFB/BDS of Condition of Contract, Volume-I. IEM shall be applicable for packages wherein IEM are identified in Section IFB/BDS of Condition of Contract, Volume-I.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Integrity Pact Page 7 of 8
(7) Should one or several provisions of this agreement turn out to be invalid, the remainder of this agreement remains valid. In this case, the parties will strive to come to an agreement to their original intentions.
Signature Signature
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
(Office Seal) (Office Seal)
Designation : Designation :
Witness 1 : Witness 1 :
Designation : Designation :
Witness 2 : Witness 2 :
Designation : Designation :
Integrity Pact Page 8 of 8
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) ATTACHMENT-15
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(Option for Initial Advance (either Interest Bearing Initial Advance or No Initial Advance) and Information for E-payment, PF details and declaration regarding Micro/Small & Medium Enterprises)
Bidder’s Name and Address (MSE) : To:
XXX Chief General Manager (C&M)
Name : XXX Power Grid Corporation of India Limited
Address : YYY North Eastern Region
ZZZ Dongtieh, Lower Nongrah, Lapalang
AAA Shillong – 793 006 (Meghalaya).
I We have read the provisions in the Bidding Documents regarding furnishing the option for advance payment. Accordingly, as per ITB Clause 9.3 as provided in Section BDS, Section III, Vol.-I of the Bidding Documents, we hereby confirm to opt the following:
Interest Bearing Initial Advance
Supply of Goods Portion: YES
Supply of Services (Installation) Portion: NO
II We are furnishing the following details of Statutory Registration Numbers and details of Bank for electronic payment.
1. Name of the Supplier/ Contractor in whose favour payment is to be made XXX
2. Address with PIN Code and State
Registered Office:
Principal place of business:
Correspondence Address:
3(a) Status – Company/others
[Declaration of Micro/ Small/ Medium Enterprise under Micro/ Small & Medium Enterprises Development Act 2006, if applicable]
3(b) Are you a MSE owned by SC/ST* entrepreneurs in line with Public Procurement Policy for Micro and Small Enterprises (MSEs) order 2012 including subsequent amendment/notification/order Note: Documentary evidence is to be attached. Please refer remarks at the end of the attachment.
3(c) If 3(b) is ‘Yes’ please mention whether you are (Proprietary MSE/ Partnership MSE/ Private Limited Company) owned by SC/ST entrepreneurs
3(d) Are you a MSE owned by women in line with Public Procurement Policy for Micro and Small Enterprises (MSEs) order 2012, Public Procurement Policy for Micro and Small Enterprises (MSEs) Amendment Order 2018 including subsequent amendment/notification/order Note: Documentary evidence is to be attached.
4. Permanent Account (PAN) No.
5. GSTIN Numbers
I. GSTIN in the Sates/UT from where the supply of goods take place
Name of the States/UT GSTIN number
II. GSTIN in the States/UT where the supply for services take place (states where sites under the subject package is situated)
Name of the States/UT GSTIN number
9. PF Registration No. of the Company
10. PF Regional Office covered (with Address)
11. Name of Contact Person
12. Telephone No(s)
13. Bank Details for Electronic Payment
Name of the Bank:
Address of Branch:
Type of Account: Saving Account 1
14. 9 digit MICR code printed at bottom in middle, next to cheque no.
15. IFSC (for RTGS)/NEFT Code (to be obtained from the Bank) Sample Cancelled Cheque to be enclosed
We hereby declare that the above information are true and correct and we agree that the payment on account of this Contract, in the event of award, be made in the above account maintained in the above mentioned Bank.
Remarks: *The definition of MSEs owned by SC/ST is as given under:
a. In case of proprietary MSE, proprietor(s) shall be SC /ST.
b. In case of partnership MSE, the SC/ST partners shall be holding at least 51% shares in the unit.
c. In case of Private Limited companies, at least 51% share shall be held by SC/ST promoters.
Documentary evidence: Please provide scanned copy(ies) of the SC/ST certificate(s) issued by District Authority as applicable for SC/ST MSE category as per (a), (b) or (c) above.
Date : 9-May-2023 Printed Name : La La La
Place : Shillong Designation : Za Za Za
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) ATTACHMENT-16
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(Additional Information)
Bidder’s Name and Address (MSE) : To:
XXX Chief General Manager (C&M)
Name : XXX Power Grid Corporation of India Limited
Address : YYY North Eastern Region
ZZZ Dongtieh, Lower Nongrah, Lapalang
AAA Shillong – 793 006 (Meghalaya).
In support of the additional information required as per ITB Sub-Clause 9.3 (q) of the Bidding Documents, we furnish herewith our data/details/documents etc., alongwith other information, as follows (the stipulations have been reproduced in italics for ready reference):
1.0 The Bidder shall furnish
A Certificate from their Banker(s) (as per prescribed formats in Form 16, Section-VI: Sample Forms and Procedures) indicating various fund based/non fund based limits sanctioned to the Bidder and the extent of utilization as on date. Such certificate should have been issued not earlier than three months prior to the date of bid opening. Wherever necessary the Employer may make queries with the Bidders’ Bankers. [Reference ITB clause 9.3(q)(i)]
1.1 In accordance with 1.0, certificate(s) from banker as per requisite format, indicating various fund based/non fund based limits sanctioned to the bidder or each member of the joint venture and the extent of utilization as on date is/are enclosed, as per the following details:
Name of the Bidder : XXX 1
Name of the Banker by whom certificate issued 1
Date of certificate (should not be earlier than 3 months prior to date of bid opening)
Whether fund based/non fund based limits are indicated in the certificate
Whether extent of utilization is indicated in the certificate
1.2 The Bidder should accordingly also provide the following information/documents
(i) Details of Banker:
Address of Banker
Contact Name and Title
(ii) As per para 1.0, Authorization Letter(s) from the bidder (in case of JV bidder, from all the partners) addressed to the Banker(s), authorizing POWERGRID to seek queries about the bidder with the Banker(s) and advising the Banker(s) to reply the same promptly, is/are enclosed as per following details:
Sl. No. Letter Ref. Date Addressed to (name of the Bank)
(iii) As per para BDS/ITB clause 9.3 q, Bidder shall furnish the details of their Provident Fund Code Number
Sl. No. Name of Bidders/ JV Partners Provident Fund Code Number Details
2.0 Litigation History
The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years. A consistent history of awards involving litigation against the Bidder or any partner of JV may result in rejection of Bid. [Reference ITB clause 9.3(q)(ii)]
2.1 Details of litigation history resulting from Contracts completed or under execution by the bidder over the last five years.
Year Name of client, cause of litigation/arbitration and matter in dispute Details of Contract and date Award for or against the bidder Disputed amount
3.0 Description of the plant for carrying out the work
Bidders should provide information of the plant(s) for carrying out the work including the proposal of manufacturing methods in sufficient detail to demonstrate the adequacy of the bidder’s proposals to meet the technical specification.
3.0 Details regarding previous transgressions of Integrity Pact
The bidder should provide detailed information on any transgression of Integrity Pact that occurred in the last 10 years with any other Public Sector Undertaking or Government Department or any other Company, in any country.
3.1 Details regarding previous transgressions of Integrity Pact that occurred in the last 10 years
Year Name of client Details of Transgression of Integrity Pact by the bidder
4.0 OTHER INFORMATION
4.1 Current Contract Commitments of works in progress
Bidders (individual firms or each partners of JV) should provide information on their current commitments on all contracts that have been awarded, or for which a letter of intent or acceptance has been received, or for contracts approaching completion, but for which an unqualified, full completion certificate has yet to be issued.
Details of Contract Value of outstanding work (Rs.) Estimated completion date
4.2 Financial Data:
Details Actual (Previous five years) Projection for next five years
Total Liability
Current Liability
Profit before taxes
Profit after taxes
4.3 Details of Provident Fund Code Number of the Bidder
Date : 9-May-2023 Printed Name : La La La
Place : Shillong Designation : Za Za Za
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) ATTACHMENT-17
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(Declaration for tax exemptions, reductions, allowances or benefits)
Bidder’s Name and Address (MSE) : To:
XXX Chief General Manager (C&M)
Name : XXX Power Grid Corporation of India Limited
Address : YYY North Eastern Region
ZZZ Dongtieh, Lower Nongrah, Lapalang
AAA Shillong – 793 006 (Meghalaya).
Dear Sirs, 1. We confirm that we are solely responsible for obtaining following tax exemptions, reductions, allowances or benefits in respect of supplies under the subject package, in case of award. We further confirm that we have considered the same in our bid thereby passing on the benefit to POWERGRID while quoting our prices. In case of our failure to receive such benefits, partly or fully, for any reason whatsoever, the Employer will not compensate us. 2. We are furnishing the following information required by the Employer for issue of requisite certificate if and as permitted in terms of the applicable Govt. of India policies/procedures (in case of award):
Applicable Act, Notification No. and Clause Ref. No. Sl. No. Description of item on which applicable Country of origin Remarks, if any
(The requirements listed above are as per current Notification of Govt. of India indicated above. These may be modified, if necessary, in terms of the Notifications.)
Date : 9-May-2023 Printed Name : La La La
Place : Shillong Designation : Za Za Za
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) ATTACHMENT-14
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
Bidder’s Name and Address (MSE) : To:
XXX Chief General Manager (C&M)
Name : XXX Power Grid Corporation of India Limited
Address : YYY North Eastern Region
ZZZ Dongtieh, Lower Nongrah, Lapalang
AAA Shillong – 793 006 (Meghalaya).
Safety Pact is annexed herewith this Volume.
Date : 9-May-2023 Printed Name : La La La
Place : Shillong Designation : Za Za Za
Instruction for printing & submitting Safety Pact
1. The requisite format of Safety Pact is getting generated automatically and displayed here below.
2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other six pages on plain A4 size paper. Such two sets shall be prepared by the bidder.
3. All the pages of both the copies of the Safety Pact shall be signed by the authorised representative of the bidder and duly stamped.
4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.
5. For further details bidders may please refer ITB Clause 9.3 (s).
Between #REF! #REF!
Power Grid Corporation of India Limited #REF! #REF!
having its Registered Office at B-9, Qutab Institutional Area, Katwaria Sarai, New Delhi – 110016 hereinafter referred to as #REF! #REF!
"POWERGRID", #REF! #REF!
XXX 1 having its Registered Office at ,
having its Registered Office at YYY,ZZZ,AAA 1 AND
having its Registered Office at FALSE
hereinafter referred to as
"The Bidder/Contractor"
POWERGRID intends to award, under laid-down organisational procedures, contract(s) for Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS. , Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB)
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Safety Pact Page 1 of 6
POWERGRID values full compliance with all relevant laws and regulations and the principles of Safety, Health& Environment in its relations with its Bidders/ Contractors.
In order to achieve these goals, POWERGRID and the above named Bidder / Contractor enter into this agreement called “Safety Pact” which will form part of the Bid.
It is hereby agreed by and between the parties as under:
Section I - Commitments of POWERGRID
POWERGRID commits itself to take all measures necessary to prevent accidents duringConstruction and Operation of the Transmission Assets and to observe the following:
1. POWERGRID recognizes and accepts its statutory responsibilities for ensuring construction, operation and maintenance of equipments and for the provision of safe methods of work and safe working conditions.
2. POWERGRID recognizes and accepts its statutory responsibilities for ensuring safety of not only its employees but also that of the Contracting Agencies as Principal Employer.
3. POWERGRID shall review the accidents in a structured manner and take necessary actions to ensure that the safety criteria are strengthened for safe construction as well as Operation & Maintenance of the Transmission Assets.
4. POWERGRID shall conduct necessary awareness and training programmes to its Employees to augment the various safety requirements to be followed during Construction and Operation & Maintenance of the Transmission Assets from time to time.
5. POWERGRID shall, from time to time, issue necessary guidelines,instructions and deterrents to its employees as well as to the Contracting Agencies, to update them to take necessary preventive measures to avoid repetition of similar accident attributes.
6. POWERGRID shall review and provide necessary guidanceto the Contracting Agencies, as and when, any abnormality / special situations are brought to its notice by the Contracting Agencies during execution of the Transmission Projects being executed by them.
7. POWERGRID shall conduct periodical surveillance site inspections / audits to identify the unsafe conditions and unsafe actions, and bring them to the knowledge of the Contracting Agencies for taking timely corrective actions.
8. POWERGRIDshall investigate all accidents, fatal as well as non-fatal, to identify the lapses, the reason for the accident / incident and suggest measures for prevention of recurrence of such accidents, and fix responsibility for the lapses leading to the accident.
9. POWERGRID shall augment the training to the workers and supervising personnel of the Contracting Agencies, as per schedules, upon nomination by the Contracting Agencies in reasonable time frame.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Safety Pact Page 2 of 6
10. POWERGRID shall exercise the right to claim and recover compensation from the Contracting Agencies in case of any violation of the safety requirements / provisions during execution of the Transmission Projects, as built in the applicable Laws and contractual specifications / guidelines in vogue / issued by POWERGRID from time to time.
Section II – Commitments of the Bidder / Contractor:
The Bidder / Contractor commits himself to take all measures necessary to prevent / minimise accidents at their construction / erection sites and to observe the following:
1. The Bidder / Contractor recognizes and acceptsthe statutory and comprehensive responsibility for ensuring safe construction and Testing & Commissioning in the Transmission Projects being executed by them by providing safe methods of work, working conditions and Tools & Plants for human safety.
2. The Bidder / Contractor recognizes and accepts the responsibilities for ensuring safety of not only their employees but also that of the Sub-contractors, Principal Employer and the general public during execution of the Transmission Projects / works.
3. The Bidder / Contractor shall review the accidents in a structured manner and take necessary actions to ensure that the safety criteria are strengthened for safe construction of the Transmission Assets.
4. The Bidder / Contractor shall endeavour continuous development of safe methods of work to ensure that the effect of risks and perils are minimised to the extent possible and implement the same at their worksites.
5. The Bidder / Contractor shall conduct periodical Training to their Employees as well as to that of their Sub-contractors for safety awareness during construction works being executed by them.
6. The Bidder / Contractor shall provide all requisite Tools & Plants required for the work and ensure their healthiness by periodical inspections / testing as required. Unhealthy and sub-standard Tools & Plants will be immediately removed from site as and when they are identified.
7. The Bidder / Contractor shall,at their cost, provide all necessary Personal Protective Equipments such as Double Lanyard Safety Belts, Appropriate Fall Arrest Systems, Safety Helmets, Foot Wear, Hand Gloves, etc., as required for various activities pertaining to execution of the Projects / works, confirming to relevant Indian Standards.
8. The Bidder / Contractor shall ensure that dedicated qualified Safety Officers are posted in the construction projects being executed by them and ensure that the Safety Officer visits each and every gang periodically and conducts audits / inspections to identify the unsafe conditions and unsafe actions, to be rectified by the site supervising personnel promptly.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Safety Pact Page 3 of 6
9. The Bidder / Contractor shall conduct appropriate medical checks-up for the workers before deploying them at their construction sites to ensure that only those who are medically fit are deployed in the Projects / works to be executed by them. The copy of the Medical Reports shall be provided by the Bidder / Contractor to POWERGRID, whenever requested by POWERGRID.
10. The Bidder / Contractor shall screen the workers before deploying them at their construction sites to ensure that only those with the skills, experience and competence to work at height and also medically fit for work at height are deployed for work at height in the Projects executed by them.
11. The Bidder / Contractor shall ensure daily before starting the work that their site Supervising Personnel / Safety Officer briefs the workers about the work for the day and the safety measures / precautions required to be taken by them.
12. The Bidder / Contractor shall investigate all the accidents at their working sites to ascertain the lapses leading to the incident and the precautionary / corrective measures required to be taken to avoid recurrence of such accidents. These accidents will be reviewed at the Board Management level of the Agencies and the findings / recommendations will be put up to POWERGRID Apex Safety Board within the stipulated period.
13. The Bidder / Contractor shall ensure that all accidents, whether fatal or non-fatal in nature, will be informed to POWERGRID, in writing, immediately on the occurrence of the same,and in any case, within not more than 24 hours of occurrence of the same.
14. The Bidder / Contractor shall ensure that in case of any accident, all necessary medical help / support shall be provided to the victims / injured till they are completely fit to return to work.
15. The Bidder / Contractor shall ensure that in case of fatal accidents, all statutory Authorities, including Police, concerned Labour Dept. Officials, concerned Workmen Compensation Commissioner, etc., will be intimated in writing as required by the statutory Law, and followed up for compliance of all statutory obligations. The Bidder / Contractor shall own full responsibility of timely accident reporting to various authorities, including POWERGRID.
16. The Bidder / Contractor shall ensure that in case of fatality or serious injury leading to permanent disablement of the victims, the compensation amount will be deposited with the concerned authorities, as required by the Laws, and followed up for early disbursement to the beneficiaries of the victims.
17. The Bidder / Contractor assures that they shall co-operate to the fullest extent for carrying out any investigation of the accidents at their work sites by POWERGRID to identify the lapses, the reason for the accident / incident and suggest measures for prevention of recurrence of such accidents. All factual details of the occurrence of the accident will be provided to POWERGRID, as and when required.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Safety Pact Page 4 of 6
18. The Bidder / Contractor assures that they take full responsibility of meeting the statutory obligations in case of accidents, and in case of any reference by any Statutory Body at a later date also, they shall provide all information to POWERGRID and meet all the statutory obligations, including payment of additional compensation, if any.
19. The Bidder / Contractor assures that in case of any inspection of their work site or Notice by any Statutory Authority, they shall comply promptly and inform POWERGRID Site Officials of the same, and also provide all necessary information and assistance for smooth compliance of the observations / instructions of such Authorities.
20. The Bidder / Contractor accepts the provisions regarding safety, including payment of any sums to POWERGRID, in case of any violation of the safety requirements / provisions during execution of the Transmission Projects, as built in the Contractual Conditions, Safety Planand the Safety Pact, and confirm to abide by the same.
Section III – Equal treatment to all Bidders / Contractors:
1. POWERGRID will enter into agreements with identical conditions as this one with all Bidders.
2. POWERGRID will disqualify, from the tender process, any bidder/ take punitive actions on the bidder, who does not sign this Pact or violate its provisions.
Section IV – Pact Duration:
This Pact begins when both parties have legally signed it. It expires for the successful Bidder / Contractor after closure of the contract and, for all other Bidders, after the contract has been awarded.
Section V – Other Provisions:
1. This agreement is subject to Indian Law. Place of performance and jurisdiction is the establishment of POWERGRID. The Arbitration clause provided in the main tender document / contract shall not be applicable for any issue / dispute arising under the Safety Pact.
2. Changes and supplements need to be made in writing, which shall come into force only upon mutual agreement / acceptance.
3. If the Contractor is a partnership firm or consortium of Joint Venture, this agreement must be signed by all partners, consortium members and Joint Venue partners, as applicable as per the Tender Specifications.
4. Nothing in this agreement shall affect the rights of the parties available under General Conditions of Contract (GCC) and Special Conditions of Contract (SCC).
5. Should one or several provisions of this agreement turn out to be invalid, the reminder of this agreement remains valid. In this case, the parties will strive to come to an agreement to their original intentions.
(Signature) (Signature)
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
Safety Pact Page 5 of 6
Signature Signature
(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Partner(s) of Joint Venture/ Contractor)
(Office Seal) (Office Seal)
Designation : Designation :
Witness 1 : Witness 1 :
Designation : Designation :
Witness 2 : Witness 2 :
Designation : Designation :
Safety Pact Page 6 of 6
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) ATTACHMENT-19
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
Bidder’s Name and Address (MSE) : To:
XXX Chief General Manager (C&M)
Name : XXX Power Grid Corporation of India Limited
Address : YYY North Eastern Region
ZZZ Dongtieh, Lower Nongrah, Lapalang
AAA Shillong – 793 006 (Meghalaya).
Further, we hereby confirm that except as mentioned in the Schedule – 6 (Alternative, Deviations and Exceptions to the Provisions) hereof forming part of our First Envelope :
(i) there are no discrepancies/inconsistencies and deviations/omissions/ reservations to the Bidding Documents, in the Second Envelope bid;
We also confirm that in case any discrepancies/ inconsistencies and deviations/ omissions/ reservations, as referred to in para (i) and (ii) above, is observed in the Second Envelope, the same shall be deemed as withdrawn/rectified without any financial implication, whatsoever to POWERGRID. However, in case of any arithmetical errors, the same shall be governed as per the provision of ITB Sub-Clause 27.2 read in conjunction with BDS
Date 9-May-2023 Printed Name La La La
Place Shillong Designation Za Za Za
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) ATTACHMENT-20
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(Declaration of Key Managerial Person jointly with Power of Attorney holder)
Bidder’s Name and Address (MSE) : To:
XXX Chief General Manager (C&M)
Name: XXX Power Grid Corporation of India Limited
Address: YYY North Eastern Region
ZZZ Dongtieh, Lower Nongrah, Lapalang
AAA Shillong – 793 006 (Meghalaya).
We are furnishing the following details/document in support of Qualifying requirement for the subject package.
A Attached copies of original documents defining :
a) The constitution or legal status;
b) The principal place of business;
c) The place of incorporation (for bidders who are corporations); or the place of registration and the nationality of the Owners (for applicants who are partnerships or individually-owned firms).
B Attached original & copies of the following documents :
a) Written power of attorney of the signatory of the Bid to commit the bidder.
b) Joint Venture Agreement.
1.0 GENERAL INFORMATION
Bidder is required to provide general information as per the following format.
[Where the Bidder proposes to use named subcontractor(s) for critical components of the works or for work contents in excess of ten (10) percent of the bid price, the following information should also be supplied for the subcontractor(s)].
S No. Particulars For Individual Firm
1 Name of the Firm
2 Head Office/ Registered Office Address
5 Contact Person
6 Place of Incorporation/ Registration
7 Year of Incorporation/ Registration
8 Nationality of
[Necessary documents to eatablish legal status of the bidder should be uploaded with the bid]
1.0 TECHNICAL REQUIREMENTS {Reference para 1.0 of Annexure-A (BDS)}
1.1 Bidder should have erected, tested and commissioned as a prime contractor* under a single contract , at least two (2) nos. Circuit Breaker equipped bays of 220kV or above voltage level in one substation or switchyard during last 7 years as on the originally scheduled date of bid opening i.e 18.04.2013 and these bays must be in operation as on the originally scheduled date of bid opening mentioned above and Note (*) : In case of works executed under a contract that had been awarded on a Joint Venture, the experience of individual Joint Venture partner shall be considered limited to the scope of that partner under the said contract.
1.1.1 the 345 kV Circuit breaker being offered are from manufacturer(s)
1.1.1(i) who have manufactured, type tested and supplied (i) (a) 345kV or above class Circuit Breaker of 40kA fault level which must be in operation for atleast two(2) years as on the originally scheduled date of bid opening mentioned above. provided further that: (i) (b) the offered 345kV class Circuit Breaker should have been, manufactured, type tested ( for 50kA ) & and which must be in operation as on the originally scheduled date of bid opening mentioned above. OR the offered 345kV class Circuit Breaker should have been manufactured and type tested (for 50 kA) as on the originally scheduled date of bid opening mentioned above and extended warranty of additional two (2) years over and above the warranty period specified for the package is given for the Circuit Breaker for which a declaration by the bidder is made in the bid. OR
1.1.1 (ii) who have manufactured, type tested and supplied 220kVor above class respective equipment(s) and have established its manufacturing facilities in india , based on technological support of a parent company or collaborator for the respective equipment provided that (a) the parent company (Principals) or collaborator (s) meets criteria stipulated under clause 1.1.1.(i)(a) & (b) mentioned above. Further the 345kV class respective equipment manufacturer shall furnish the following document alongwith the bid; (i) a legally enforceable undertaking (jointly with the parent company or collaborator) to guarantee quality, timely supply, performance and warranty obligations as specified for the equipment(s); and (ii) a confirmation letter from the parent company or collaborator alongwith the bid stating that parent company or collaborator shall furnish performance guarantee for an amount of 10 % of the ex-work cost of such equipment (s) . This performance guarantee shall be in addition to Contract Performance Guarantee to be submitted by the Bidder.
(iii) iii) The 345kV or above class shunt reactor manufacturer(s) furnishes
a) a legally enforceable undertaking (jointly with the parent company or collaborator) to guarantee quality, timely supply, performance and warranty obligations as specified for the equipment(s); and
b) a confirmation letter from the parent company or collaborator alongwith the bid stating that parent company or collaborator shall furnish performance guarantee for an amount of 10 % of the cost of such equipment (s) . This performance guarantee shall be in addition to Contract Performance Guarantee to be submitted by the Bidder
(iii) Both b) i) & b) ii) should have been in operation for at least two (2) years on the date of bid opening as mentioned above.
2.1.2 Indian 765kV Reactor Manufacturer
(i) The bidder should have manufactured in India, type tested 715 kV or higher voltage class one (1) number of three phase Reactor of at least 240 MVAR capacity Or A bank of three (3) single phase Reactors, each Reactor having a capacity of at least 80 MVAR
(ii) the above Reactor(s) should have been supplied as on the date of bid opening as mentioned above based on technological support of parent company / collaborator(s) / subsidiary provided that :
(a) Parent company / collaborator(s) / subsidiary meets the Technical Experience criteria stipulated in 1.1.(a) or 1.1.(b)
(b) A legally enforceable undertaking jointly by Bidder and the parent company / collaborator(s)/subsidiary (as per enclosed format in Section-VI, Vol.-I of bidding document) is furnished along with the bid, to guarantee quality, timely supply, performance and warranty obligations for five (5) years for entire quantity to be manufactured and supplied from the works in India and a confirmation letter from the parent company / collaborator/subsidiary along with the bid stating that parent company / collaborator/subsidiary shall furnish performance guarantee for an amount of 10% of the cost of such equipment(s). This performance guarantee shall be in addition to contract performance guarantee to be submitted by the bidder
[Further, for Joint Venture bidders, the requirement to be met is stipulated under para 3.0 of Annexure-A (BDS), Volume-I]
In case bidder is a holding company, the technical experience referred to in clause 1.1 above shall be of that holding company only (i.e excluding its subsidiary/ group companies). In case bidder is a subsidiary of a holding company, the technical experience referred to in clause 1.1 above shall be of that subsidiary company only ( i.e excluding its holding company)
1.2 Using the following format, the Bidder is requested to furnish details of previous experience against the requirements detailed at para 2.1.1 & 2.1.2 above, on the basis of which the Bidder wishes to qualify. The information is to be summarised using following format for each previous experience of the Bidder.
(The bidder shall attach documentary evidence, such as copies of utility certificates for completed contracts and copies of award letters etc. for ongoing contracts in support of his experience as listed in the following proforma for each Contract with the help of "Attach" Buttons provided in table given below).
Format for the Bidder (Single Firm / Partner in case of Joint Venture) [In case of Joint Venture bidder, the QR data of each of the partner (in support of meeting the requirement of para 1.3 of Annexure-A(BDS), Conditions of Contract, Volume-I of the bidding documents] is also is to furnished, as applicable, using this format
Name of the Bidder (Single Firm/Lead partner/Partners of a JV)
1 Name of Contract Undertaken
2 Contract Reference No. & Date of Award
3 Name and Address of the Employer/Utility for whom the Contract was executed by bidder/Parent Company (Principals)/ Collaborator
4(i) Name of sub-station or switchyard executed under the Contract
4(ii) Voltage level of sub-station or switchyard
No of circuit breaker equipped bays in sitchyard
Name of the substation or switchyard
Type of cooling in the above Reactor
5 Scope of work involved under the Contract
(Tick whichever is/are applicable)
6 Date of Commissioning of above Reactor
7 No. of years the above Shunt Reactor is in satisfactory operation as on the date of bid opening
Whether parent company / collaborator(s) / subsidiary meets the technical experience criteria stipulated at 2.1.1 (a) or 2.1.1 (b), and the details of which is mentioned at Format-A above. (Choose whichever is applicable from the drop down menu)
Whether legally enforceable undertaking jointly by Bidder and the parent company / collaborator(s)/subsidiary (as per format in the bidding document) is furnished along with the bid. (Choose whichever is applicable from the drop down menu) Yes
Confirmation letter from the Parent Company / Collaborator/Subsidiary along with the bid stating that Parent Company / Collaborator/Subsidiary shall furnish performance guarantee, in addition to contract performance guarantee to be submitted by the bidder, for an amount of 10% of the cost of equipment(s) to be manufactured and supplied from the works in India. (Choose whichever is applicable from the drop down menu) Yes
8 Details of documents uploaded in support of the above stated experience
Format B: Format for the bidders (Manufacturers) who wish to qualify through route 2.1.2:
Name of the Bidder (Manufacturer)
1 Whether the bidder is a 345kV class shunt reactors manufacturer, who has recently established production line in India for these equipment(s), based on technological support of a parent company or collaborator for 345kV class Shunt Reactor
2 Name of the parent company (Principals) or collaborator for 345kV class Shunt Reactor (The qualifying data for parent company (Principals) or collaborator for the Shunt Reactor shall be furnished in Format-A)
3 Date of Commissioning of above Reactors
4 Whether the 345kV class transformer or 220KV or above class shunt reactors manufacturer (bidder) has furnished:
(Tick whichever is/are applicable)
5 (a) a legally enforceable undertaking (jointly with the parent company or collaborator) to guarantee quality, timely supply, performance and warranty obligations as specified for the equipment(s); and YES
5 (b) a confirmation letter from the parent company or collaborator alongwith the bid stating that parent company or collaborator shall furnish performance guarantee for an amount of 10% of the ex-works cost of such equipment (s) [This performance guarantee shall be in addition to Contract Performance Guarantee to be submitted by the Bidder]. NO
6 Details of documents uploaded in support of the above stated experience
Format B: Format for the bidders (Manufacturers) who wish to qualify through route 2.1.2:
Name of the Bidder (Manufacturer)
1 Whether the bidder is a 345kV class shunt reactors manufacturer, who has recently established production line in India for these equipment(s), based on technological support of a parent company or collaborator for 345kV class Shunt Reactor
2 Name of the parent company (Principals) or collaborator for 345kV class Shunt Reactor (The qualifying data for parent company (Principals) or collaborator for the Shunt Reactor shall be furnished in Format-A)
3 Date of Commissioning of above Reactors
4 Whether the 345kV class transformer or 220KV or above class shunt reactors manufacturer (bidder) has furnished:
(Tick whichever is/are applicable)
5 (a) a legally enforceable undertaking (jointly with the parent company or collaborator) to guarantee quality, timely supply, performance and warranty obligations as specified for the equipment(s); and YES
5 (b) a confirmation letter from the parent company or collaborator alongwith the bid stating that parent company or collaborator shall furnish performance guarantee for an amount of 10% of the ex-works cost of such equipment (s) [This performance guarantee shall be in addition to Contract Performance Guarantee to be submitted by the Bidder]. NO
6 Details of documents uploaded in support of the above stated experience
3.0 FINANCIAL REQUIREMENTS :
3.1 Financial Position {Reference para 1.2 of Annexure-A (BDS)}
a) Minimum Average Annual Turnover *(MAAT) for best three years i.e 36 months out of last five financial years of the bidder should be Rs 876.38 million (Rs. 87.638 Crore) for the subject package.
* Note: Annual total income as incorporated in the profit and loss account except non-recurring income e.g. sale of fixed assets
b) Bidder shall have liquid assets (L.A.) or/and evidence of access to or availability of credit facilities of not less than Rs.146.06 million (Rs. 14.606 Crore) for subject package.
In case bidder is a holding company, MAAT & LA referred to in clause 3.1 (a) & (b) above shall be that of holding company only (i.e. excluding its subsidiary / group companies). In case bidder is a subsidiary of a holding company, MAAT & LA referred to in clause 3.1 (a) & (b) above shall be that of subsidiary company only (i.e. excluding its holding company).
[For Bidders to qualify for more than one package, their financial position shall not be less than the sum of the requirement for the packages they propose to quaify for.
{In support of its ‘Financial Position’, in line with the above, the Bidder must provide the relevant information, alongwith documentary evidence, in the following format}
3.2 Financial Qualification Data:
Name of the bidder
A Turnover details:
Turnover Details of documentary evidence submitted in support of Qualification Data
Turnover (in Millions)
Sl No Financial year
Do you have audited results for FY 2011-12 Yes
Average Annual Turnover for best Three Years is
*(Indicate the rate(s) of exchnage against US Dollar at the end of each year, which have been used for arriving the amount at equivalent US Dollar.)
B Liquid Assets
Details of evidence of having Liquid assets (LA)
Details of evidence of access to or availability of credit facilities
A Turnover details:
Turnover Equivalent US$ (in Million) exchange rate* Details of documentary evidence submitted in support of Qualification Data
Currency Turnover (in Millions)
Sl No Financial year
Do you have audited results for FY 2011-12 Yes
Average Annual Turnover for best Three Years is
*(Indicate the rate(s) of exchnage against US Dollar at the end of each year, which have been used for arriving the amount at equivalent US Dollar.)
B Liquid Assets
Currency LA Equivalent US$ (in Million)
Details of evidence of having Liquid assets (LA)
Details of evidence of access to or availability of credit facilities
A Turnover details:
Turnover Equivalent US$ (in Million) exchange rate* Details of documentary evidence submitted in support of Qualification Data
Currency Turnover (in Millions)
Sl No Financial year
Do you have audited results for FY 2011-12 Yes
Average Annual Turnover for best Three Years is
*(Indicate the rate(s) of exchnage against US Dollar at the end of each year, which have been used for arriving the amount at equivalent US Dollar.)
B Liquid Assets
Currency LA Equivalent US$ (in Million)
Details of evidence of having Liquid assets (LA)
Details of evidence of access to or availability of credit facilities
4.0 Joint Venture (JV) Firms {Reference para 3.0 of Annexure-A (BDS)}
A In case a bid is submitted by a Joint Venture(JV) of two or more firms as partners, the JV shall meet collectively the complete requirement mentioned at clause 2.0 & 3.0 above, further the partners of Joint Venture joint shall meet the following requirements :
a) The lead partner shall meet not less than 40% of the Financial Position minimum criteria given at para 2.0(a) & 2.0(b).
b) Each of the other partner(s) individually shall meet not less than 25% of the minimum Financial Position criteria given at para 3.0(a) & 3.0(b).
The figure of average annual turnover and liquid assets/credit facilities for each of the partners of the JV shall be added together to determine the JV’s compliance with the minimum qualifying criteria set out in para 3.0 (a) & 3.0 (b) above
However, for a JV to be qualified, the partner(s) of JV must also meet the following minimum criteria
(I) One of the partners(s) of JV shall meet the Technical Experience criteria stipulated under para 1.1(a) or 1.1(b)
(II) The remaining partner(s) of JV should be a Indian Transformer or Reactor Manufacturer and
(i) shall individually meet the criteria stipulated under 1.1 (a) or 1.1(b)
(ii) should have designed, manufactured, tested & supplied 345 kV or higher voltage class
(a) one (1) number of three phase Transformer of at least 200 MVA capacity OR a bank of three (3) single phase Transformers, each Transformer having a capacity of at least 67 MVA.
(b) should have designed, manufactured, tested & supplied 345 kV or higher voltage class one (1) number of three phase Reactor of at least 50 MVAR capacity OR A bank of three (3) single phase Reactors, each Reactor having a capacity of at least 16.7 MVAR.
(c ) The above transformer(s) and reactor(s) should have been supplied as on the date of bid opening and established manufacturing and testing facility in India for 765kV class Reactors provided that :-
(c )(i) Indian Transformer or Reactor Manufacturer enter into a valid technology transfer agreement for design, manufacturing, testing and supply of 765kV Reactor based on technological support with the other partner of JV who meets the Technical Experience criteria stipulated in 1.1.(a) or 1.1.(b) above
(c )(ii) A legally enforceable undertaking jointly by such Indian Transformer or Reactor Manufacturer(s) and partner of JV who meets the Technical Experience criteria stipulated in 1.1 above (as per enclosed format in Section-VI, ‘Sample Forms & Procedures (Forms), of Vol.-I’ of the bidding document) is furnished along with the bid, to guarantee quality, timely supply, performance and warranty obligations as specified, for the equipment(s) to be manufactured and supplied from the works of such Indian Manufacturer(s) in India
B In case of Joint Venture, the following conditions shall also apply:
i) the bid, and in case of successful bid, the specified Form of Agreement shall be signed so as to be legally binding on all partners (as per enclosed format in Section-VI, ‘Sample Forms & Procedures (Forms), of Vol.-I’ of the bidding document)
ii) one of the partners shall be nominated as Lead Partner, and the Lead Partner shall be authorized to incur liabilities and receive instructions for and on behalf of any and all partners of the Joint Venture, and the entire execution of the Contract shall be done with the Lead Partner and payment under the contract shall be received by the Lead Partner on behalf of the Joint Venture as per power conferred to him in the Power of Attorney. The authorization shall be evidenced by submitting a Power of Attorney signed by legally authorized signatory of all the partners as per Performa in section “Annexure” of Special Conditions of Contract, Vol-1A. The payment under the Contract can also be received by other partner(s) based on authorization of Lead Partner
iii) all partners of the Joint Venture shall be liable jointly and severally for the execution of the Contract in accordance with the Contract terms, and a statement to this effect shall be included in the authorization mentioned under (ii) above as well as in the Bid Form and in the Contract Form (in case of a successful bid)
iv) agreement entered into by the Joint Venture partners shall be submitted with the bid.
4.1 In accordance with the above, in case of JV bidders, it should be ensured that necessary details including those pertaining to each JV partner are furnished and the documents are submitted alongwith the bid. Further, the JV bidders should also ensure that other requirements are complied with. The lists of documents furnished are to be indicated below :
4.0 The Bidder shall also furnish following documents/details with its bid. {Reference ITB clause 9.3 (c)}
4.1 The complete annual reports together with Audited statement of accounts of the company for last five years of its own (separate) immediately preceding the date of submission of bid.
Note I. In the event the bidder is not able to furnish the information of its own (i.e separate), being a subsidiary company and its accounts are being consolidated with its group/holding/parent company, the bidder should submit the audited balance sheets, income statements, other information pertaining to it only (not of its group/Holding/Parent Company) duly certified by any one of the authority [ (i) Statutory Auditor of the bidder /(ii) Company Secretary of the bidder or (iii) A certified Public Accountant] certifying that such information/documents are based on the audited accounts as the case may be.
II. Similarly, if the bidder happens to be a Group/Holding/Parent Company, the bidder should submit the above documents/information of its own (i.e. exclusive of its subsidiaries) duly certified by any one of the authority mentioned in Note-I above certifying that these information/documents are based on the audited accounts, as the case may be.
4.2 The Bidder should accordingly also provide the following information/documents:
Audited balance sheet and income statements for the last five years as per the following:
Years preceding to the bid opening Audited Balance Sheet and Income Statements enclosed Audited Balance Sheet and Income Statements enclosed Audited Balance Sheet and Income Statements enclosed
1st Year Yes No Yes
2nd Year Yes Yes Yes
3rd Year Yes Yes Yes
4th Year Yes Yes Yes
5th Year Yes Yes Yes
Date : 9-May-2023 Printed Name : La La La
Place : Shillong Designation : Za Za Za
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS(VOL-IB) ATTACHMENT-23
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(Compliance to the process related to the e-RA Terms & Conditions and the Business Rules governing the e-RA)
Bidder’s Name and Address (MSE) : To:
XXX Sr. General Manager (C&M)
Name: XXX Power Grid Corporation of India Limited
Address: YYY North Eastern Region
ZZZ Dongtieh, Lower Nongrah, Lapalang
AAA Shillong – 793 006 (Meghalaya).
This has reference to the Terms & Conditions for the e-Reverse Auction mentioned in the Business Rules for Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS. .
We confirm that:
1) The undersigned is authorized representative of the Bidder.
2) We have studied the e-Reverse Auction Terms & Conditions and the Business Rules governing the e-Reverse Auction as mentioned in your letter and confirm our agreement to them.
3) We understand that ASP shall arrange to demonstrate/ train (if not trained earlier) bidders’ nominated person(s), without any cost. They will also explain all the Rules related to e-Reverse Auction/ Business Rules Document to be adopted along with bid manual. We have further noticed that we at own discretion may ask for additional training to use the e-RA platform well in advance before start of the e-RA event by contacting the ASP at any suitable time. All such additional trainings shall also be free of cost.
We hereby confirm that we will honor the Bids placed by us during the auction process.
Date : 9-May-2023 Printed Name: La La La
Place : Shillong Designation: Za Za Za
Date : 9-May-2023 Printed Name : La La La
Place : Shillong Designation : Za Za Za
#REF! #REF! #REF! #REF! #REF! #REF!
Sl. No. Clause Ref. No. Description of Clause Observation/ Comment of the Bidder Remarks #REF! #REF! #REF! #REF! #REF! #REF!
1 Clause 10 Taxes and Duties, Section-IV, GCC 10. Taxes and Duties #REF! #REF! #REF! #REF! #REF! #REF!
10.1 The Supplier shall be entirely responsible for payment of all taxes, duties, licence fees ………………………. #REF! #REF! #REF! #REF! #REF!
10.2 The Supplier shall be solely responsible for the taxes that may be levied on the Supplier's persons ……………………….. #REF! #REF! #REF! #REF! #REF!
10.3 In respect of direct transaction between the Purchaser and the Supplier, the EXW price is inclusive………………………….. #REF!
10.4 Octroi/entry tax as applicable for destination site/state on all items of supply including bought-out finished items, which shall be dispatched directly from the …………………………………… #REF!
10.5 Purchaser would not bear any liability on account of Service Tax. ………………. #REF!
10.6 Sales Tax/VAT on Works Contract, Turnover Tax or any other similar taxes under the …………………………………..
10.7 For the purpose of the Contract, it is agreed that the Contract Price specified in Article 2(Contract Price and Terms of Payment) of the Contract Agreement is based on the taxes, duties, levies and charges prevailing at the date seven (07) days prior to the last date of bid submission (hereinafter called “Tax” in this GCC Sub-clause 10.7). .……………........................................
In respect of raw materials, intermediary components etc and bought out items, neither the Purchaser nor the Supplier shall be entitled to any claim arising due to increase or decrease in the rate of Tax, ……………………………………………....
2 Clause 29 Change in Laws and Regulations, Section-IV, GCC 29.1 If, after the date seven (07) days prior to the date of Bid Opening, any law, regulation, ordinance, order or by-law having the force of law is enacted, promulgated, abrogated or changed in India (which shall be deemed to include any change in interpretation or application by the competent authorities) ……………………………………….
USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only EURO Four Thousand Nine Hundred Sixty Only RMB Ten Thousand Three Hundred Fifty Two Only INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only USD 155885/- + EURO 4960/- + RMB 10352/- + INR 691647/-
USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only plus EURO Four Thousand Nine Hundred Sixty Only plus RMB Ten Thousand Three Hundred Fifty Two Only plus INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only
85 Eighty Five 60 Sixty 52 Fifty Two 47 Forty Seven
8 Eight Hundred 9 Nine Hundred 3 Three Hundred 6 Six Hundred
55 Fifty Five Thousand 4 Four Thousand 10 Ten Thousand 91 Ninety One Thousand 0 0 0 0 0 plus
1 One Lac 0 0 6 Six Lac 0 0 0 0 1
1 One 1 One 1 One 1 One 0 0 1 0 1
2 Two 2 Two 2 Two 2 Two 0 0 1 1 0
3 Three 3 Three 3 Three 3 Three 0 0 1 1 1
4 Four 4 Four 4 Four 4 Four 0 1 0 0 0
5 Five 5 Five 5 Five 5 Five 0 1 0 0 1
6 Six 6 Six 6 Six 6 Six 0 1 0 1 0
7 Seven 7 Seven 7 Seven 7 Seven 0 1 0 1 1
8 Eight 8 Eight 8 Eight 8 Eight 0 1 1 0 0
9 Nine 9 Nine 9 Nine 9 Nine 0 1 1 0 1
10 Ten 10 Ten 10 Ten 10 Ten 0 1 1 1 0
11 Eleven 11 Eleven 11 Eleven 11 Eleven 1 1 1 1 1 USD One Lac Fifty Five Thousand Eight Hundred Eighty Five Only plus EURO Four Thousand Nine Hundred Sixty Only plus RMB Ten Thousand Three Hundred Fifty Two Only plus INR Six Lac Ninety One Thousand Six Hundred Forty Seven Only
12 Twelve 12 Twelve 12 Twelve 12 Twelve
13 Thirteen 13 Thirteen 13 Thirteen 13 Thirteen
14 Fourteen 14 Fourteen 14 Fourteen 14 Fourteen
15 Fifteen 15 Fifteen 15 Fifteen 15 Fifteen
16 Sixteen 16 Sixteen 16 Sixteen 16 Sixteen 0 0 0 0 0 +
17 Seventeen 17 Seventeen 17 Seventeen 17 Seventeen 0 0 0 0 1 /- +
18 Eighteen 18 Eighteen 18 Eighteen 18 Eighteen 0 0 0 1 0 /-
19 Nineteen 19 Nineteen 19 Nineteen 19 Nineteen 0 0 0 1 1
20 Twenty 20 Twenty 20 Twenty 20 Twenty 0 0 1 0 0
21 Twenty One 21 Twenty One 21 Twenty One 21 Twenty One 0 0 1 0 1
22 Twenty Two 22 Twenty Two 22 Twenty Two 22 Twenty Two 0 0 1 1 0
23 Twenty Three 23 Twenty Three 23 Twenty Three 23 Twenty Three 0 0 1 1 1
24 Twenty Four 24 Twenty Four 24 Twenty Four 24 Twenty Four 0 1 0 0 0
25 Twenty Five 25 Twenty Five 25 Twenty Five 25 Twenty Five 0 1 0 0 1
26 Twenty Six 26 Twenty Six 26 Twenty Six 26 Twenty Six 0 1 0 1 0
27 Twenty Seven 27 Twenty Seven 27 Twenty Seven 27 Twenty Seven 0 1 0 1 1
28 Twenty Eight 28 Twenty Eight 28 Twenty Eight 28 Twenty Eight 0 1 1 0 0
29 Twenty Nine 29 Twenty Nine 29 Twenty Nine 29 Twenty Nine 0 1 1 0 1
30 Thirty 30 Thirty 30 Thirty 30 Thirty 0 1 1 1 0
31 Thirty One 31 Thirty One 31 Thirty One 31 Thirty One 1 1 1 1 1 USD 155885/- + EURO 4960/- + RMB 10352/- + INR 691647/-
32 Thirty Two 32 Thirty Two 32 Thirty Two 32 Thirty Two
33 Thirty Three 33 Thirty Three 33 Thirty Three 33 Thirty Three
34 Thirty Four 34 Thirty Four 34 Thirty Four 34 Thirty Four
35 Thirty Fivr 35 Thirty Fivr 35 Thirty Fivr 35 Thirty Fivr
36 Thirty Six 36 Thirty Six 36 Thirty Six 36 Thirty Six
37 Thirty Seven 37 Thirty Seven 37 Thirty Seven 37 Thirty Seven
38 Thirty Eight 38 Thirty Eight 38 Thirty Eight 38 Thirty Eight
39 Thirty Nine 39 Thirty Nine 39 Thirty Nine 39 Thirty Nine
40 Forty 40 Forty 40 Forty 40 Forty
41 Forty One 41 Forty One 41 Forty One 41 Forty One
42 Forty Two 42 Forty Two 42 Forty Two 42 Forty Two
43 Forty Three 43 Forty Three 43 Forty Three 43 Forty Three
44 Forty Four 44 Forty Four 44 Forty Four 44 Forty Four
45 Forty Five 45 Forty Five 45 Forty Five 45 Forty Five
46 Forty Six 46 Forty Six 46 Forty Six 46 Forty Six
47 Forty Seven 47 Forty Seven 47 Forty Seven 47 Forty Seven
48 Forty Eight 48 Forty Eight 48 Forty Eight 48 Forty Eight
49 Forty Nine 49 Forty Nine 49 Forty Nine 49 Forty Nine
50 Fifty 50 Fifty 50 Fifty 50 Fifty
51 Fifty One 51 Fifty One 51 Fifty One 51 Fifty One
52 Fifty Two 52 Fifty Two 52 Fifty Two 52 Fifty Two
53 Fifty Three 53 Fifty Three 53 Fifty Three 53 Fifty Three
54 Fifty Four 54 Fifty Four 54 Fifty Four 54 Fifty Four
55 Fifty Five 55 Fifty Five 55 Fifty Five 55 Fifty Five
56 Fifty Six 56 Fifty Six 56 Fifty Six 56 Fifty Six
57 Fifty Seven 57 Fifty Seven 57 Fifty Seven 57 Fifty Seven
58 Fifty Eight 58 Fifty Eight 58 Fifty Eight 58 Fifty Eight
59 Fifty Nine 59 Fifty Nine 59 Fifty Nine 59 Fifty Nine
60 Sixty 60 Sixty 60 Sixty 60 Sixty
61 Sixty One 61 Sixty One 61 Sixty One 61 Sixty One
62 Sixty Two 62 Sixty Two 62 Sixty Two 62 Sixty Two
63 Sixty Three 63 Sixty Three 63 Sixty Three 63 Sixty Three
64 Sixty Four 64 Sixty Four 64 Sixty Four 64 Sixty Four
65 Sixty Five 65 Sixty Five 65 Sixty Five 65 Sixty Five
66 Sixty Six 66 Sixty Six 66 Sixty Six 66 Sixty Six
67 Sixty Seven 67 Sixty Seven 67 Sixty Seven 67 Sixty Seven
68 Sixty Eight 68 Sixty Eight 68 Sixty Eight 68 Sixty Eight
69 Sixty Nine 69 Sixty Nine 69 Sixty Nine 69 Sixty Nine
70 Seventy 70 Seventy 70 Seventy 70 Seventy
71 Seventy One 71 Seventy One 71 Seventy One 71 Seventy One
72 Seventy Two 72 Seventy Two 72 Seventy Two 72 Seventy Two
73 Seventy Three 73 Seventy Three 73 Seventy Three 73 Seventy Three
74 Seventy Four 74 Seventy Four 74 Seventy Four 74 Seventy Four
75 Seventy Five 75 Seventy Five 75 Seventy Five 75 Seventy Five
76 Seventy Six 76 Seventy Six 76 Seventy Six 76 Seventy Six
77 Seventy Seven 77 Seventy Seven 77 Seventy Seven 77 Seventy Seven
78 Seventy Eight 78 Seventy Eight 78 Seventy Eight 78 Seventy Eight
79 Seventy Nine 79 Seventy Nine 79 Seventy Nine 79 Seventy Nine
80 Eighty 80 Eighty 80 Eighty 80 Eighty
81 Eighty One 81 Eighty One 81 Eighty One 81 Eighty One
82 Eighty Two 82 Eighty Two 82 Eighty Two 82 Eighty Two
83 Eighty Three 83 Eighty Three 83 Eighty Three 83 Eighty Three
84 Eighty Four 84 Eighty Four 84 Eighty Four 84 Eighty Four
85 Eighty Five 85 Eighty Five 85 Eighty Five 85 Eighty Five
86 Eighty Six 86 Eighty Six 86 Eighty Six 86 Eighty Six
87 Eighty Seven 87 Eighty Seven 87 Eighty Seven 87 Eighty Seven
88 Eighty Eight 88 Eighty Eight 88 Eighty Eight 88 Eighty Eight
89 Eighty Nine 89 Eighty Nine 89 Eighty Nine 89 Eighty Nine
90 Ninety 90 Ninety 90 Ninety 90 Ninety
91 Ninety One 91 Ninety One 91 Ninety One 91 Ninety One
92 Ninety Two 92 Ninety Two 92 Ninety Two 92 Ninety Two
93 Ninety Three 93 Ninety Three 93 Ninety Three 93 Ninety Three
94 Ninety Four 94 Ninety Four 94 Ninety Four 94 Ninety Four
95 Ninety Five 95 Ninety Five 95 Ninety Five 95 Ninety Five
96 Ninety Six 96 Ninety Six 96 Ninety Six 96 Ninety Six
97 Ninety Seven 97 Ninety Seven 97 Ninety Seven 97 Ninety Seven
98 Ninety Eight 98 Ninety Eight 98 Ninety Eight 98 Ninety Eight
99 Ninety Nine 99 Ninety Nine 99 Ninety Nine 99 Ninety Nine
100 One Hundred 100 One Hundred 100 One Hundred 100 One Hundred
INR Fifty Eight Thousand Only
58 Fifty Eight Thousand
23 Twenty Three
27 Twenty Seven
28 Twenty Eight
33 Thirty Three
37 Thirty Seven
38 Thirty Eight
73 Seventy Three
74 Seventy Four
75 Seventy Five
77 Seventy Seven
78 Seventy Eight
79 Seventy Nine
83 Eighty Three
87 Eighty Seven
88 Eighty Eight
93 Ninety Three
97 Ninety Seven
98 Ninety Eight
100 One Hundred
Package Name Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
Package Code Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
Specification No. Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC
1 Fill up only green shaded cells in Sch-1, Sch-2, Sch-3, and Bid Form 2nd Envelope.
2 All the cells in Sch-5, Sch-6 and Sch-6 (After Discount) are auto filled, therefore no cell is required to be filled up there.
3 Instructions / error messages, if any, will be displayed automatically after selecting the cell.
4 After filling up all the schedues, save the file, take print out of all the schedules and Bid form and sign & stamp and submit them as hard copy of the 2nd envelope (Price part) of the bid. Also ensure to submit the soft copy of the the same file on CD/ DVD.
I While filling up the worksheets following may please be observed :
(i) Fill up only green shaded cells.
(ii) Certain data type entries have been restricted, such as Numeric values or limits of numeric values.
(iii) Select only the options provided in pull down menus.
(iv) Do not link any cell of this work book with any other work book.
(v) Do not use copy & paste or cut & paste options for filling up the data.
(vi) Do not reformat any of the cell of the work book.
II This Workbook consists of following worksheets :
Opening page of the workbook.
Names of Bidder :
● Select Sole Bidder or JV (Joint Venture) from the pull down menu. Do not leave this cell blank.
● Select nos. of the JV Partners other than the Lead Partner from drop down menu.
● In case of JV partners more than 2, enter details of 3rd & more partners along with details of 2nd partner.
● Fill up names and address of the Sole Bidder and /or Joint Venture.
● Fill up date in dd-mm-yyyy format from drop down menu.
● Click for Sch-1 given at the right top of the worksheet to go to Sch-1.
Sch-1 (Ex-works Prices) :
● Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.
● Corresponding cell for mode of transaction shall be come enable only after filling up the unit rate, therefore first fill up the unit rate and then mode of transaction for the corresponding item.
● Select either Direct or Bought-out from the drop down menu. Do not leave the cell blank the same shall be deemed to be Bought-out if the cell is left blank.
● Total amount shall get calculated automatically.
● Type Test charges shall appear automatically in Sch-1, after filling up Sch-7 appropriately (if Applicable).
Sch-2 (Inland Transportation, In-transit Insurance, loading & unloading Charges) :
● Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.
● Total amount shall get calculated automatically.
Sch-3 (Installation Charges) :
● Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.
● Total amount shall get calculated automatically.
Sch-4 (Training Charges) : Not Applicable
● Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price. Total amount shall get calculated automatically.
Sch-5 (Summary of Taxes and Duties applicable on the Goods) :
● Fill up applicable rate of Excise Duty. The amount of Excise Duty on the items mentioned as Direct in the mode of transaction in Schedule-1 shall be calculated automatically at the rate mentioned by the bidder here.
● Segregate and fill up the amount on which Sales Tax shall be applicable out of Ex-works supply items mentioned as direct in the mode of transaction in Schedule-1. Applicable Excise Duty on this amount will be calculated automatically at the rate mentioned by the bidder. Further, fill up the rate of applicable Sales Tax. Amount of Sales Tax shall be automatically calculated on the amount mentioned by the bidder as subjected to Sales Tax plus applicable Excise Duty at the rate mentioned by the Bidder.
● Difference of total amount quoted by the bidder as Direct Transaction and the amount mentioned by him subjected to Sales Tax shall be considered as the amount on which VAT shall become applicable and the same shall be calculated & displayed automatically. Applicable Excise Duty on this amount at the rate mentioned by the bidder shall also be calculated & displayed automatically. Fill up the rate of applicable VAT. The amount of VAT shall be calculated automatically on the amount considered to be subjected to VAT plus applicable Excise Duty at the rate mentioned by the bidder here.
● Amount as per details filled up by the bidder in the work sheets Entry Tax, Octroi and other Taxes & Duties shall be displayed in this work sheet Sch-5 but will not be added to the grand total and shall be considered as applicable.
● Click at the links to go to the work sheets Entry Tax, Octroi and other Taxes & Duties one by one.
● Fill the description, amount and rate of applicable Entry Tax. Total of this worksheet shall be displayed in Sch -5 (Taxes & Duties)
● Click at the link to go back to Sch-5.
● Fill the description, amount and rate of applicable Octroi. Total of this worksheet shall be displayed in Sch -5 (Taxes & Duties)
● Click at the link to go back to Sch-5.
Other Taxes & Duties :
● Fill the description, amount and rate of applicable Other Taxes & Duties. Total of this worksheet shall be displayed in Sch -5 (Taxes & Duties)
● Click at the link to go back to Sch-5.
● Summary of all the Schedules without considering discount (mentioned in the work sheet discount) shall be displayed automatically.
● No cell is required to be filled in by the bidder in this worksheet.
Sch-7 (Type Test Charges) :
● Fill up the rates & location where type tests are proposed.
● Total of this Sch-7 shall automatically appear in Sch-1.
Guarantee Declariation (GD) :
● Fill up the losees in kW only as proposed.
Bid from 2nd Envelope :
● Fill up ref. no. as bidder's ref no. of this letter.
● This letter shall consider the net price as per Sch-6 (After Discount).
● Fill up names & Designation of the representatives of other JV partner(s) if the bidder is JV (Joint Venture) .
● Fill up additional information as required.
Happy Bidding !
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC Sole Bidder 1
JV (Joint Venture) 2 or More
Enter following details of the bidder Micro and Small Enterprise (MSE)
Specify type of Bidder [Select from drop down menu] Micro and Small Enterprise (MSE) 0 2
Name of MSE aaa 3
Address of Registered Office bbb
Name of other Partner - 1 eeee
Address of other Partner - 1 ffff
Name of other Partner - 2 (more, if any)
Address of other Partner - 2 (more, if any)
Printed Name xxx
Designation yyyy
Date 2 Sep 2020 30
Substation Package–S3 for a) 765/400kV Raipur Pooling Substation Extension under Installation of Bus Reactor and ICT in WR; b) 765kV Vindhyachal Pooling Station Extension (Part A )under Transmission System associated with Vindhyachal-V project of NTPC (Part A); c) 765kV Vindhyachal Pooling Station Extension (Part B), and 765kV Jabalpur Pooling Station Extension (Part B) under Transmission System associated with Vindhyachal-V project of NTPC (Part B)
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC Bid Form 2nd Envelope Sole Bidder 1 st 1 January
0 2 nd 2 February
BID FORM (Second Envelope) 3 rd 3 March
Bid Proposal Ref. No. 5 th 5 May
Date : 2-Sep-2020 6 th 2 6 June
To: 8 th September 8 August
Sr. General Manager (C&M) 9 th 2020 9 September
Power Grid Corporation of India Limited 10 th 10 October
North Eastern Region 11 th 11 November
Dongtieh, Lower Nongrah, Lapalang 12 th 12 December
Shillong – 793 006 (Meghalaya). 13 th
Name of Contract : Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS. 15 th
Dear Ladies and/or Gentlemen, 16 th
1.0 In continuation of Techno-commercial Bid,we hereby submit the Second Envelope of the Bid,both of which shall be read together and in conjunction with each other,and shall be construed as an integral part of our Bid. Accordingly,we the undersigned,submit our offer for Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS. under the above-named package in full conformity with the said Bidding Documents for the sum of (Specify the currency and the amount in figures and words) …………. or such other sums as may be determined in accordance with the terms and conditions of the Bidding Documents. In continuation of First Envelope of our Bid, we hereby submit the Second Envelope of the Bid, both of which shall be read together and in conjunction with each other, and shall be construed as an integral part of our Bid. Accordingly, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial Operation, Performance & Guarantee Test as per provision of Technical Specification) under the above-named package in full conformity with the said Bidding Documents for the sum of Rs. or such other sums as may be determined in accordance with the terms and conditions of the Bidding Documents. #REF! #REF! 17 th
Schedule 1 Plant and Equipment (Including Mandatory Spare Parts) to be supplied, including Type Test Charges. 21 st
Schedule 2 Local Transportation, In-transit Insurance, loading and unloading 22 th
Schedule IA Installation Charges. [Scheduled Items/DSR Items] Sole Bidder 23 th
Schedule IB Installation Charges. [Non-Scheduled Items/Non-DSR Items]
Schedule 4 Training charges for training to be imparted [NOT APPLICABLE] 24 th
Schedule 5 Taxes and Duties not included in Schedule 1 25 th
Schedule 6 Grand Summary [Schedule 1to 5] 26 th
Schedule 7 Break-up of Type Test Charges for Type Tests to be conducted [NOT APPLICABLE] 27 th
2.5 We declare that items left blank in the Schedules will be deemed to have been included in other items. The TOTAL for each Schedule and the TOTAL of Grand Summary shall be deemed to be the total price for executing the Facilities and sections thereof in complete accordance with the Contract, whether or not each individual item has been priced. 31 st
3.0 We confirm that except as otherwise specifically provided our Bid Prices in this Second Envelope include all taxes, duties, levies and charges as may be assessed on us/our Associate (applicable for Foreign Bidder), our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.
3.1 100% of applicable Taxes and Duties i.e GST, which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents.
3.3 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN, in all the states where the project is located and the states from which we shall make our supply of goods.
4.0 # (For Joint Venture only) We, the partners of Joint Venture submitting this bid, do agree and confirm that in case of Award of Contract on the Joint Venture, we shall be jointly and severally liable and responsible for the execution of the Contract in accordance with Contract terms and conditions. 2
5.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.
Dated this 2nd day of September 2020
Thanking you, we remain,
Yours faithfully,
For and on behalf of
Date : 2-Sep-2020 Printed Name : xxx
Place : Shillong Designation : yyyy
Please provide additional information of the Bidder
Business Address :
Country of Incorporation :
State/Province to be indicated :
Name of Principal Officer :
Address of Principal Officer :
Note: Bidders may note that no prescribed proforma has been enclosed for Attachment 2 : Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC Schedule-IA to BPS (Vol-IC) Schedule - 1
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(SCHEDULE OF RATES AND PRICES)
Bidder’s Name and Address (MSE) : To:
Chief General Manager (C&M)
Name : aaa Power Grid Corporation of India Limited
Address : bbb North Eastern Region
ccc Dongtieh, Lower Nongrah, Lapalang
ddd Shillong – 793 006 (Meghalaya).
ERECTION WORK (CIVIL)
All Prices are in Indian Rupees. All Prices are in Indian Rupees.
SI. No. HSN/SAC Code Whether HSN in column ‘2’ is confirmed. If not, indicate applicable HSN code # Rate of GST applicable (in %) Whether rate of GST in column ‘3 is confirmed. If not indicate applicable rate of GST# (in %) DSR Item Description Unit Qty. Unit Ex-works price Total Ex-works price Mode of Transaction (Direct or Bought out)^ GST, Tax as confirmed by Bidder Total Value Applicable GST Rate GST on item
Construction of 3 Nos. B1-Typeresidential building at 220/132 kV Salakati Sub-station under ADD CAP 2019-24.
1 2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
3 2.26 Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. 0.00
5 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 0.00
6 18% 4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) cum 12.810 6,939.46 88,894.48
7 5.33 DESIGN MIX CONCRETE Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work, using coarse aggregate and fine aggregates derived from natural sources, Potrland Puzzzolana/ Ordinary Portland/ Portland slag, admixutues in recommneded proportions as per IS: 9103 to accelerate/ retard setting of concrete to improve workability without impairing strength and including pumping of concrete to site of laying, curing, carriage for all leads but excluding cost of centering, shuttering, finishing & reinforcement as per direction of Engineer-in-charge. Concrete of M25 grade 0.00
8 18% 5.33.1 All works upto plinth level cum 58.575 8,772.75 513,863.83
9 18% 5.33.2 All works above plinth level upto floor V level cum 49.390 11,057.56 546,132.89
10 5.9 Centering and shuttering including strutting, propping etc. and removal of form for : 0.00
11 18% 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete sqm 64.675 337.81 21,847.86
12 18% 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers sqm 195.535 667.34 130,488.33
13 18% 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts sqm 149.130 882.23 131,566.96
14 18% 5.9.7 Stairs, (excluding landings) except spiral-staircases sqm 14.065 721.53 10,148.32
15 18% 5.9.3 Suspended floors, roofs, landings, balconies and access platform sqm 257.065 840.88 216,160.82
16 6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 0.00
17 18% 6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) sqm 40.400 9,337.47 377,233.79
18 6.13 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. 0.00
19 18% 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) sqm 81.995 1,116.77 91,569.56
20 13.4 12 mm cement plaster of mix : 0.00
22 13.5 15 mm cement plaster on rough side of single or half brick wall of mix: 0.00
24 13.47 EXTERIOR FINISHING Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 0.00
25 18% 13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) sqm 280.130 178.09 49,888.35
26 13.41 INTERIOR FINISHING Distempering with oil bound washable distemper (OBD) of approved brand and manufacture to give an even shade : 0.00
27 18% 13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer sqm 602.770 178.31 107,479.92
28 11.41 VITRIFIED FLOOR TILE Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 0.00
30 18% 16/8.31 CERAMIC GLAZED TILES Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. sqm 68.070 1,166.56 79,407.74
31 11.23 Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : 0.00
32 18% 11.23.5 Udaipur green marble sqm 12.035 2,304.06 27,729.36
33 18% 11.24 Extra for pre finished nosing to treads of steps of marble stone. Metre 26.000 650.83 16,921.58
34 8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 0.00
35 8.2.2 Granite of any colour and shade 0.00
37 8.3 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 0.00
38 18% 8.3.2 Granite work metre 8.340 459.46 3,831.90
39 18% 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm) sqm 141.615 849.32 120,276.45
40 12.21 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design 0.00
42 18% 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. each 1.000 292.45 292.45
43 18% 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. each 4.000 106.13 424.52
44 18% 9.141 Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge. Metre 87.350 507.07 44,292.56
45 9.142 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer-in-charge. 0.00
46 18% 9.142.1 Decorative finish (wood grained finish) sqm 32.130 4,408.04 141,630.33
47 9.31 Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568, for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, as per directions of Engineer-in-charge: (Note:- Butt hinges and necessary screws shall be paid separately) 0.00
49 18% NS-1 Supplying and installing uPVC sliding windows made out of lead free, UV resistant green profile of BIS standard uPVC multichambered sections with corners fusion welded, fully reinforced with Galvanized steel atleat 1.5/2mm thick including interlock profile, glaxzing bead, grooving bead, brush seal, aluminium sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop-up handle, keeper, drain cap, fisher screws, packing pieces with all necessary SS screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside/outside of dowcorning/GE or equivalent complete as directed. with 5mm clear glass.(b) 2 track sliding window/openable without flyscreen using uPVC section of minimum sizes 58mm X 53mm X 2.4mm thick wall for frame, 37mm X 61mm X 2.4mm thick wall for glass sash & interlock: 43mm X 23mm (glass panel). Make: Sintex, Fenesta , Ozone ) (i) 2-3 panel with 5mm clear float glass sqm 33.435 7,516.51 251,314.51
50 18% NS-2 Supplying and installing uPVC sliding windows made out of lead free, UV resistant green profile of BIS standard uPVC multi chambered sections with corners fusion welded, fully reinforced with Galvanized steel atleast 1.5/2mm thick including interlock profile, glazing bead, grooving bead, brush seal, aluminum sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop-up handle, keeper, drain cap, fisher screws, packing pieces with all necessary SS screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside/outside of dowcorning/GE or equivalent complete as directed. with 5mm clear glass.(b) 2 track sliding window/openable without fly screen using uPVC section of minimum sizes 58mm X 53mm X 2.4mm thick wall for frame, 37mm X 61mm X 2.4mm thick wall for glass sash & interlock: 43mm X 23mm (glass panel). Make: Sintex, Fenesta , Ozone )(ii) 4-panel or more with 5mm clear float glass sqm 76.740 8,728.57 669,830.46
51 10.26 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. 0.00
53 10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 0.00
54 18% 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works kg 109.200 156.10 17,046.12
55 9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 0.00
56 18% 9.48.1 Fixed to steel windows by welding kg 312.565 198.55 62,059.78
57 17.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 0.00
58 18% 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid each 4.000 6,077.79 24,311.16
59 17.19 Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 0.00
60 18% 17.19.1 10 litre (full flush) capacity-white each 4.000 2,118.07 8,472.28
61 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 0.00
62 18% 17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps each 4.000 3,721.84 14,887.36
63 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 0.00
65 18% 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. each 4.000 1,547.98 6,191.92
66 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 0.00
67 18% 17.73.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. each 4.000 658.56 2,634.24
68 17 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 0.00
69 17.10.1 Kitchen sink with drain board 0.00
71 17.70 Providing and fixing PTMT Bottle Trap for Wash basin and sink 0.00
72 18% 17.70.2 Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gm each 4.000 356.63 1,426.52
73 18% 8 Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc.complete. 100sqm 5.000 521.66 2,608.30
74 10 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 0.00
76 9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 0.00
80 9 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 0.00
82 9 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade, with necessary screws etc. complete. 0.00
83 18% 9.101.2 Twin rubber stopper each 18.000 68.29 1,229.22
84 18% 10 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. each 12.000 896.77 10,761.24
85 9 Providing and fixing stainless steel (SS-304 grade) friction hinges to the side/top hung uPVC windows, of approved quality, with necessary stainless steel screws etc. as per direction of Engineer-in-charge. 0.00
87 5 STEEL REINFORCEMENT Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 0.00
88 18% 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 3937.550 98.34 387,218.67
89 5.22A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. 0.00
90 18% 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 10727.390 98.34 1,054,931.53
91 18% 4 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. sqm 31.000 747.75 23,180.25
92 18% 4.11 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size). sqm 7.130 496.10 3,537.19
93 18% 4.12 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. per 50kg of cement 19.000 62.69 1,191.11
94 18% 4.13 Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. sqm 7.130 124.89 890.47
95 2.35 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment : 0.00
96 2.35.1 Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete: 0.00
97 18% 2.35.1.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration Metre 31.000 35.43 1,098.33
98 18% 9.45 Providing and fixing teak wood lipping of size 25x3 mm in pelmet. Metre 24.600 65.93 1,621.88
99 10 Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. 0.00
101 9.92 Providing and fixing chromium plated brass handles with necessary screws etc. complete: 0.00
102 18% 9.92.2 100 mm (4 Nos. handles per cupboard) each 16.000 218.52 3,496.32
103 9 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. 0.00
104 18% 9.114.2 Double strip (horizontal type) (12 Nos. magnetic catcher per cupboard) each 48.000 37.46 1,798.08
105 9.61 Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete. 0.00
107 18% 9.112 Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge. Metre 121.600 93.90 11,418.24
108 9.47 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : (Hanger rods) 0.00
109 18% 9.47.1 20 mm dia (heavy type) -1 metre long Metre 16.000 167.46 2,679.36
110 9.13 Providing and fixing cup board shutters with 25 mm thick veneered particle board IS : 3097 marked, exterior grade (Grade I), of approved make, including IInd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge. 0.00
111 18% 9.130.1 With decorative veneering on one side and commercial veneering on other side sqm 24.000 1,830.06 43,921.44
112 9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). 0.00
113 18% 9.1.1 Second class teak wood cum 0.210 144,335.21 30,310.39
114 19.18 Supplying and fixing C.I. cover without frame for manholes : 0.00
115 18% 19.18.2 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg each 1.500 3,531.13 5,296.70
116 17.35 Providing and fixing soil, waste and vent pipes : 0.00
118 18% 17.35.1.1 Sand cast iron S&S pipe as per IS: 1729 each 2.000 1,116.77 2,233.54
119 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 0.00
121 18% 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. cum 210.400 278.57 58,611.13
122 18% 2.27 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. cum 10.845 2,370.76 25,710.89
123 18% 10.17 10.17 Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. each 8.000 203.98 1,631.84
124 18.11 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 0.00
125 18% 18.11.1 15 mm dia nominal bore (washroom and basin) metre 24.000 532.25 12,774.00
126 18% 18.11.2 20 mm dia nominal bore (washroom and basin) metre 12.000 593.57 7,122.84
127 18.15 Providing and fixing brass bib cock of approved quality : 0.00
129 18.16 Providing and fixing brass stop cock of approved quality: 0.00
131 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 0.00
133 18% 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. per litre 2000.000 10.64 21,280.00
134 18.75 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 0.00
135 18% 18.75.1 15 mm nominal bore, weighing not less than 32 gms each 2.000 47.22 94.44
136 12.41 Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 0.00
138 12.42 Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 0.00
143 12.43 Providing and fixing Unplasticised -PVC pipe clips of approved design to Unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 0.00
145 22.70 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following perations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment etc.. All above operations to be done in order and as directed and specified by the Engineerin-Charge : 0.00
146 18% 22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm. sqm 72.310 1,670.63 120,803.26
147 18% 11.37 Providing and laying Antiskid Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete sqm 17.655 1,026.32 18,119.68
148 17.35.2 Providing and fixing soil, waste and vent pipes : 75 mm diameter : 0.00
149 18% 17.35.2.1 Sand cast iron S&S pipe as per IS: 1729 each 2.000 1,021.88 2,043.76
150 17.36 Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 (1cement:2fine sand) in SCI/ CI 0.00
152 17.58 Providing lead caulked joint to SCI/ centrifugally cast (Spun) iron pipes and fittings of diametre. 0.00
154 17.37 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : 0.00
155 18% 17.37.2 For 75 mm dia pipe (for vent pipes) each 2.000 333.97 667.94
156 19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 0.00
157 19.4.1 100x100 mm size P type 0.00
158 18% 19.4.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 6.000 2,691.46 16,148.76
159 17.39 Providing and fixing plain bend of required degree. 0.00
161 18% 17.39.1.1 Sand cast iron S&S pipe as per IS:1729 each 4.000 452.99 1,811.96
162 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 0.00
163 17.28.1 Semi regid pipe 0.00
165 19.32 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 0.00
166 18% 19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 1.000 30,746.97 30,746.97
167 19.7 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : 0.00
168 19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 0.00
169 18% 19.7.1.1 With F.P.S. bricks with class designation 75 each 2.000 12,820.33 25,640.66
170 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 0.00
172 19.3 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 0.00
174 18% 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Each 4.000 1,033.51 4,134.04
175 18% 6.15 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. sqm 81.995 94.83 7,775.59
176 6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 0.00
177 18% 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 3.565 7,303.87 26,038.30
178 18% Analysis Construction of drains 300mm wide with 300mm depth by providing base PCC 1:4:8 and full brick wall of mortar 1:6 and plastering with a coat of neat cement pf mortar 1:4 (1 cement:4 fine sand) all complete including back filling. Mtr 50.000 2,134.21 106,710.50
179 18% 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth leve 4.1.3 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Cum 0.307 8,079.30 2,483.17
Total Estimate Cost for the Scheduled/DSR based Items [SCHEDULED-IA-A] 6,634,246.34
Note : Specify amount of GST on the transaction between the Contractor and the Employer.
# In case the bidder leaves the cell for confirmation of the HSN code and/or GST rate “blank”, the HSN code and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.
Date : 2-Sep-2020 Printed Name : xxx
Place : Shillong Designation : yyyy
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC Schedule - 1 Direct Total 0 Micro and Small Enterprise (MSE) `
BO Total #REF! 0
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(SCHEDULE OF RATES AND PRICES : EX-WORKS PRICES)
Bidder’s Name and Address (MSE) : To:
Contract Services
Name : aaa Power Grid Corporation of India Ltd.,
Address : bbb "Saudamini", Plot No.-2
ddd Gurgaon (Haryana) - 122001
Plant and Equipment (including Mandatory Spares Parts) to be supplied, including Type Test Charges for Tests to be conducted. Direct
All Prices are in Indian Rupees. Bought-Out
SI. No. Item Description Unit Qty. Unit Ex-works price Total Ex-works price Mode of Transaction (Direct / Bought-out)
1.1 #REF! Bought-Out
(a) #REF! #REF! #REF! #REF! #REF! #REF!
(b) #REF! #REF! #REF! #REF! #REF! #REF!
1.2 #REF! #REF!
(a) #REF! #REF! #REF! #REF! #REF! #REF!
(b) #REF! #REF! #REF! #REF! #REF! #REF!
1.3 #REF! #REF!
(a) #REF! #REF! #REF! #REF! #REF! #REF!
(b) #REF! #REF! #REF! #REF! #REF! #REF!
2.0 #REF! #REF!
2.1 #REF! #REF!
(a) #REF! #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF! #REF!
(b) #REF! #REF! #REF! #REF! #REF! #REF!
3.0 #REF! #REF!
3.1 #REF! #REF!
(a) #REF! #REF! #REF! #REF! #REF! #REF!
(b) #REF! #REF! #REF! #REF! #REF! #REF!
(c) #REF! #REF! #REF! #REF! #REF! #REF!
(d) #REF! #REF! #REF! #REF! #REF! #REF!
(e) #REF! #REF! #REF! #REF! #REF! #REF!
(f) #REF! #REF! #REF! #REF! #REF! #REF!
4.0 #REF! #REF!
(a) #REF! #REF! #REF! #REF! #REF! #REF!
(a) #REF! #REF! #REF! #REF! #REF! #REF!
(b) #REF! #REF! #REF! #REF! #REF! #REF!
(c ) #REF! #REF! #REF! #REF! #REF! #REF!
(d) #REF! #REF! #REF! #REF! #REF! #REF!
(a) #REF! #REF! #REF! #REF! #REF! #REF!
(b) #REF! #REF! #REF! #REF! #REF! #REF!
(c ) #REF! #REF! #REF! #REF! #REF! #REF!
(d) #REF! #REF! #REF! #REF! #REF! #REF!
(e ) #REF! #REF! #REF! #REF! #REF! #REF!
(f) #REF! #REF! #REF! #REF! #REF! #REF!
(a) #REF! #REF! #REF! #REF! #REF! #REF!
(b) #REF! #REF! #REF! #REF! #REF! #REF!
(c ) #REF! #REF! #REF! #REF! #REF! #REF!
(d) #REF! #REF! #REF! #REF! #REF! #REF!
(e ) #REF! #REF! #REF! #REF! #REF! #REF!
(a) #REF! #REF! #REF! #REF! #REF! #REF!
(i) #REF! #REF! #REF! #REF! #REF! #REF!
(ii) #REF! #REF! #REF! #REF! #REF! #REF!
Total Ex-Works Price C) Direct #REF! Direct
Total Ex-Works Price C) Bought Out #REF!
Total Ex-Works Price C) #REF!
Total Type Test charges as per Schedule-7 (D) 0.00 #REF! #REF!
Total Ex-works Price including Type Test charges #REF! #REF! #REF!
Discount Sch-1 #REF! MPD Sch-1 #REF!
Dis Alert #REF!
Note : Specify amount of Excise Duty, Sales Tax/'VAT and other taxes payable on the transaction between the Contractor and the Employer and octroi/entry tax as applicable for destination site/state on all items of supply including bought-out finished items (to be identified in the Contract), which shall be dispatched directly from the sub-vendor’s works to the Employer’s site (sale-in-transit), separately in Schedule-5. Excise Duty, Sales tax and other levies for all the bought-out items are to be included in the EXW Price (Col. No. 5) only and not to be indicated in Schedule-5.
Date : 2-Sep-2020
Place : Shillong Printed Name : xxx
Designation : yyyy
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC Schedule - 2
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS. As per Lum-sum 0
(SCHEDULE OF RATES AND PRICES ) AS per Percent #REF!
As per lum-sum on Sch-2 0.00%
Bidder’s Name and Address (MSE) : To: As per Percent on Sch-2 #REF!
Chief General Manager (C&M) Total Discount #REF!
Name : aaa Power Grid Corporation of India Limited
Address : bbb North Eastern Region
ccc Dongtieh, Lower Nongrah, Lapalang Multipackage Discount 0.00%
ddd Shillong – 793 006 (Meghalaya).
Local Transportation, In-transit Insurance, loading and unloading
All Prices are in Indian Rupees. Amount after Discount (Rs.) Dis Alert Amount after MPD (Rs.)
SI. No. PR No PR Line Item No Activity Description Material Code Description Unit Quantity Unit Local Transportation, In-transit Insurance, loading and unloading Charges Total Local Transportation, In-transit Insurance, loading and unloadingCharges Unit Freight & Insurance Charges Total Freight & Insurance Charges Unit Freight & Insurance Charges Total Freight & Insurance Charges
1 72.5KV, SF6 TO Air Bushing for connecting GIS to AIS 2000A.31 5kA” No. 7 Included #REF!
2 72,5 KV, GIS bue duct (3phase),2000A,31.5kA* M 50 Included #REF!
3 Foundation bolt including nut, cheeknut and wrsher for Lattice and pipe structure 28mm dia No. 20 Included #REF!
Total of Schedule-2 0.00
Date : 2-Sep-2020 Printed Name : xxx
Place : Shillong Designation : yyyy
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC Schedule - 2 Dis
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS. As per Lum-sum 0
(SCHEDULE OF RATES AND PRICES : FREIGHT & INSURANCE CHARGES) AS per Percent #REF!
As per lum-sum on Sch-2 0.00%
Bidder’s Name and Address (MSE) : To: As per Percent on Sch-2 #REF!
Chief General Manager (C&M) Total Discount #REF!
Name : aaa Power Grid Corporation of India Limited
Address : bbb North Eastern Region
ccc Dongtieh, Lower Nongrah, Lapalang Multipackage Discount 0.00%
ddd Shillong – 793 006 (Meghalaya).
All Prices are in Indian Rupees. Amount after Discount (Rs.) Dis Alert Amount after MPD (Rs.)
SI. No. Description Unit Quantity Unit Freight & Insurance Charges Total Freight & Insurance Charges Unit Freight & Insurance Charges Total Freight & Insurance Charges Unit Freight & Insurance Charges Total Freight & Insurance Charges
(a) #REF! #REF! #REF! #REF! #REF!
(a) #REF! #REF! #REF! #REF! #REF!
(a) #REF! #REF! #REF! #REF! #REF!
(b) #REF! #REF! #REF! #REF! #REF!
(c ) #REF! #REF! #REF! #REF! #REF!
(a) #REF! #REF! #REF! #REF! #REF!
(b) #REF! #REF! #REF! #REF! #REF!
(c) #REF! #REF! #REF! #REF! #REF!
(d) #REF! #REF! #REF! #REF! #REF!
(e) #REF! #REF! #REF! #REF! #REF!
(f) #REF! #REF! #REF! #REF! #REF!
(a) #REF! #REF! #REF! #REF! #REF!
(a) #REF! #REF! #REF! #REF! #REF!
(b) #REF! #REF! #REF! #REF! #REF!
(c) #REF! #REF! #REF! #REF! #REF!
(d) #REF! #REF! #REF! #REF! #REF!
(a) #REF! #REF! #REF! #REF! #REF!
(b) #REF! #REF! #REF! #REF! #REF!
(c) #REF! #REF! #REF! #REF! #REF!
(d) #REF! #REF! #REF! #REF! #REF!
(e) #REF! #REF! #REF! #REF! #REF!
(f) #REF! #REF! #REF! #REF! #REF!
(a) #REF! #REF! #REF! #REF! #REF!
(b) #REF! #REF! #REF! #REF! #REF!
(c) #REF! #REF! #REF! #REF! #REF!
(d) #REF! #REF! #REF! #REF! #REF!
(e) #REF! #REF! #REF! #REF! #REF!
(a) #REF! #REF! #REF! #REF! #REF!
(i) #REF! #REF! #REF! #REF! #REF!
(ii) #REF! #REF! #REF! #REF! #REF!
Total F&I Price #REF!
Date : 2-Sep-2020
Place : Shillong Printed Name : #REF!
Designation : #REF!
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC Schedule - 3
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS. As per Lum-sum 0.00%
(SCHEDULE OF RATES AND PRICES) AS per Percent #REF!
As per lum-sum on Sch-3 0.00%
Bidder’s Name and Address (MSE) : To: As per Percent on Sch-3 #REF!
Chief General Manager (C&M) Total Discount #REF!
Name : aaa Power Grid Corporation of India Limited
Address : bbb North Eastern Region
ccc Dongtieh, Lower Nongrah, Lapalang Multipackage lum-sum 0.00%
ddd Shillong – 793 006 (Meghalaya).
INSTALLATION CHARGES
All Prices are in Indian Rupees. Amount after Discount (Rs.) Dis Alert Amount after MPD (Rs.)
Sl. No. PR No PR Line Item No Activity Header PR Activity No Activity Description Service Code SAC (Service Accounting Codes) Whether SAC in column ‘7A’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Whether rate of GST in column ‘10’ is confirmed. If not indicate applicable rate of GST # (in %) Description Unit Quantity Unit Erection Charges Total Erection Charges GST, Tax as confirmed by Bidder Total Applicable GST GST on ITEM Unit Erection Charges Total Erection Charges Unit Erection Charges Total Erection Charges
1 998342 Confirmed 18 Confirmed 72.5KV, SF6 TO Air Bushing for connecting GIS to AIS 2000A.31 5kA” No. 6 Included 0.00 #REF! 0 18 0
2 998342 Confirmed 18 Confirmed 72,5 KV, GIS bue duct (3phase),2000A,31.5kA* M 50 Included 0.00 #REF! 0 18 0
3 995454 Confirmed 18 Confirmed Erection Hardware for the 72.5kV equipment for Tertiary loading ae per technical specification Set 1 Included 0.00 #REF! 0 18 0
4 995454 Confirmed 18 Confirmed 72.6kv isolator-3 phase double breaker 31.5 kA laolator without E/S No. 1 Included 0.00 #REF! 0 18 0
5 995454 Confirmed 18 Confirmed 72.5kV 1 Phase Bus Post Insulator Set 5 Included 0.00 #REF! 0 18 0
6 995455 Confirmed 18 Confirmed Strucrure for 72.5kV BPI (excluding wave) Nos 5 Included 0.00 #REF! 0 18 0
7 995433 Confirmed 18 Confirmed Foundation bolt including nut, cheeknut and warsher for Lattice and pipe structure 28mm dia Nos 20 Included 0.00 #REF! 0 18 0
8 995433 Confirmed 18 Confirmed Excavation in all typea of soil and rock including backfilling disposal etc. for all lead Cu.M 159.97 Included 0.00 #REF! 0 18 0
9 995433 Confirmed 18 Confirmed Providing and laying of Plain Cement Concrete (PCC) (1:4:8) CRM 4.24 Included 0.00 #REF! 0 18 0
10 995455 Confirmed 18 Confirmed Providing and laying of Reinforced Cement Concrete 1:1.5:3 including pre cast,shuttering, fronting of pockets & underpinning but excluding steel reinforcement C u.M 32.84 Included 0.00 #REF! 0 18 0
11 995468 Confirmed 18 Confirmed Steel Reinforcement MT 1.654 Included 0.00 #REF! 0 18 0
Grand Total for Schedule-3 0.00 0.00 0.000
# In case the bidder leaves the cell for confirmation of the SAC and/or GST rate “blank”, the SAC and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.
Date : 2-Sep-2020 Printed Name : xxx
Place : Shillong Designation : yyyy
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC Schedule - 3
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS. As per Lum-sum 0.00%
(SCHEDULE OF RATES AND PRICES : ERECTION CHARGES) AS per Percent #REF!
As per lum-sum on Sch-3 0.00%
Bidder’s Name and Address (MSE) : To: As per Percent on Sch-3 #REF!
Chief General Manager (C&M) Total Discount #REF!
Name : aaa Power Grid Corporation of India Limited
Address : bbb North Eastern Region
ccc Dongtieh, Lower Nongrah, Lapalang Multipackage lum-sum 0.00%
ddd Shillong – 793 006 (Meghalaya).
All Prices are in Indian Rupees. Amount after Discount (Rs.) Dis Alert Amount after MPD (Rs.)
SI. No. Description Unit Quantity Unit Erection Charges Total Erection Charges Unit Erection Charges Total Erection Charges Unit Erection Charges Total Erection Charges
(a) #REF! #REF! #REF! #REF! #REF!
(b) #REF! #REF! #REF! #REF! #REF!
(c) #REF! #REF! #REF! #REF! #REF!
2.1 #REF! #REF! #REF! (a) Detailed Soil Investigation
(a) #REF! #REF! #REF! #REF! #REF! (b) All kinds of soil except fissured rock & hard rock
(b) #REF! #REF! #REF! #REF! #REF! (e) River Crossing Location
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
(a) #REF! #REF! #REF! #REF! #REF! Wet Soil
(b) #REF! #REF! #REF! #REF! #REF! Dry Fissured Rock
(c) #REF! #REF! #REF! #REF! #REF! Wet Fissured Rock
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
(a) #REF! #REF! #REF! #REF! #REF!
(b) #REF! #REF! #REF! #REF! #REF!
4.3 #REF! #REF! #REF! #REF! #REF!
4.4 #REF! #REF! #REF! #REF! #REF!
(a) #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
(a) #REF! #REF! #REF! #REF! #REF!
(b) #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
(a) #REF! #REF! #REF! #REF! #REF!
(b) #REF! #REF! #REF! #REF! #REF!
(c) #REF! #REF! #REF! #REF! #REF!
(d) #REF! #REF! #REF! #REF! #REF!
(e) #REF! #REF! #REF! #REF! #REF!
(f) #REF! #REF! #REF! #REF! #REF!
(a) #REF! #REF! #REF! #REF! #REF!
(b) #REF! #REF! #REF! #REF! #REF!
(c) #REF! #REF! #REF! #REF! #REF!
9.1 #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
(a) #REF! #REF! #REF! #REF! #REF!
#REF! #REF! #REF! #REF! #REF!
11.2 #REF! #REF! #REF! #REF! #REF!
11.3 #REF! #REF! #REF! #REF! #REF!
11.4 #REF! #REF! #REF! #REF! #REF!
11.5 #REF! #REF! #REF! #REF! #REF!
11.6 #REF! #REF! #REF! #REF! #REF!
11.7 #REF! #REF! #REF! #REF! #REF!
11.8 #REF! #REF! #REF! #REF! #REF!
11.9 #REF! #REF! #REF! #REF! #REF!
11.10 #REF! #REF! #REF! #REF! #REF!
11.11 #REF! #REF! #REF! #REF! #REF!
Total Erection Price (A+B+C) #REF!
Date : 2-Sep-2020
Place : Shillong Printed Name : #REF!
Designation : #REF!
Specification No: CC-CS/165-NER/SS-3864/3/G10 Schedule - 4
Substation packages ARP-SS-05 including 132kV Class Transformer & Reactor under Comprehensive Scheme for Strengthening of Transmission & Distribution System in NER & Sikkim : Intra-State : Arunachal Pradesh
(SCHEDULE OF RATES AND PRICES )
Bidder’s Name and Address (Lead Partner) : To:
Chief General Manager (C&M)
Name : aaa Power Grid Corporation of India Limited
Address : bbb North Eastern Region
ccc Dongtieh, Lower Nongrah, Lapalang
ddd Shillong – 793 006 (Meghalaya).
Training Charges for Training to be imparted
All figures in INR
SI. No. PR No PR Line Item No Activity Header PR Activity No Activity Description Service Code SAC (Service Accounting Codes) Whether SAC in column '8’ is confirmed. If not indicate applicable the SAC * Rate of GST applicable ( in %) Whether rate of GST in column ‘4’ is confirmed. If not indicate applicable rate of GST * Description Unit Quantity Unit Training Charges excluding GST Total Training Charges excluding GST Total GST as confirmed by Bidder
NOT APPLICABLE 0.00 0 0
Total Training Charges Included 0
Total GST as confirmed by Bidder 0.00
Date : 2-Sep-2020 Printed Name : xxx
Place : Shillong Designation : yyyy
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC Schedule - 4
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(SCHEDULE OF RATES AND PRICES : TRAINING CHARGES)
Bidder’s Name and Address (MSE) :
Name : aaa #REF!
TRAINING CHARGES
Sl. No. PR No Line Item No Activity Header PR Activity No Activity Description Service Code Description Units Quantity Training Charges
Unit Charges Total Amount
I NOT APPLICABLE
1 7000002675 10 460 10 Training of Comm. Eqpt. 100002900 Training for communication Equipments MND 5 Included
II Extension of 765kV Raipur Pooling S/S under POWERGRID works associated with TBCB lines under Common Transmission system for Phase-II generation projects in Odisha (DPR-2)
1 7000004440 10 400 10 Training 100002670 Training at substation Site in the area of erection, testing, commissioining, operation and maintenence of CB, Isolator, CT, CVT andSurge Arrester. TAG 2 Included
2 7000004440 10 400 20 Training 100002671 Training at substation site in the area of testing, commissioining, operation and maintenece of Protection and automation system TAG 2 Included
3 7000004440 10 400 40 Training 100002661 Training at substation Site in the area of erection, testing, commissioining, operation and maintenance of Digital ProtectionCoupler. DAY 2 Included
III Extension of 765/400kV Gaya S/S under Transmission system associated with Nabinagar-II
1 7000002510 10 790 10 Training of Comm. Eqpt. 100002900 Training for communication Equipments MND 20 Included
Total for Training Charges [Total Schedule 4)] 0.00 #REF!
NOTE: To and fro charges and accommodation for the Instructor (Trainer) and Training material for the Trainees shall be included in the prices quoted by the bidder.
Date : 2-Sep-2020 Printed Name : xxx
Place : Shillong Designation : yyyy
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC Schedule - 4
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(SCHEDULE OF RATES AND PRICES : TRAINING CHARGES)
Bidder’s Name and Address (MSE) : To:
Chief General Manager (C&M) #REF!
Name : aaa Power Grid Corporation of India Limited #REF!
Address : bbb North Eastern Region
ccc Dongtieh, Lower Nongrah, Lapalang
ddd Shillong – 793 006 (Meghalaya).
Training Charges
1. Price Component of training to be imparted to Employer's Personnel by Bidder's instructor
Sl. No. Description Country where training is to be imparted Item for which training is to be imparted Training duration in days Training Charges
per DIEM Rate Total Amount
1 The Bidder shall impart necessary training to Employer's Six personnel on design, operation, maintenance and commissioning aspect as per technical specification at manufacturer’s /supplier’s works. Transformer 3 Included
PLCC 3 Included
Control, Protection & Automation 5 Included
Switchyard Equipments (CB,CT,CVT, Isolators & LA 3 Included
Total for Training Charges [Total Schedule 4)] #REF! #REF!
NOTE: To and fro charges and accommodation for the Instructor (Trainer) and Training material for the Trainees shall be included in the prices quoted by the bidder.
Date : 2-Sep-2020 #REF! xxx
Place : Shillong #REF! yyyy
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC Schedule - 5
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
SUMMARY OF TAXES & DUTIES APPLICABLE ON PLANT & EQUIPMENT
Bidder’s Name and Address (MSE) : To:
Chief General Manager (C&M)
Name : aaa Power Grid Corporation of India Limited
Address : bbb North Eastern Region
ccc Dongtieh, Lower Nongrah, Lapalang
ddd Shillong – 793 006 (Meghalaya).
Sl. No. Item Nos. Total Price (INR) After Discount After MPDiscount
1 TOTAL EXCISE DUTY #REF! Excise Duty 0 Excise Duty 0
Total Excise Duty for direct transaction between the Contractor and the Employer (identified in Schedule 1 as 'Direct') which are not included in the Ex-works price as per the provision of the Bidding Documents, as applicable.
Rate of Excise Duty for Direct items indicated in Sch-1
2 0.00 Sales Tax 0.00 Sales Tax 0.00
Total Sales Tax for direct transaction between the Contractor and the Employer (identified in Schedule 1 as 'Direct') which are not included in the Ex-works price as per the provision of the Bidding Documents, as applicable. #DIV/0! 0 #DIV/0! 0
Amount on which Sales Tax is applicable [only ex-w price] Amount #DIV/0! Amount #DIV/0!
Excise duty on this amount @ 0% 0 ED #DIV/0! ED #DIV/0!
Rate of Sales Tax
3 TOTAL VAT #REF! Vat 0 Vat 0
Total VAT for direct transaction between the Contractor and the Employer (identified in Schedule 1 as 'Direct') which are not included in the Ex-works price as per the provision of the Bidding Documents, as applicable #REF! 0 #REF! 0
Amount on which VAT is applicable [only ex-w price] #REF! Amount #REF! Amount #REF!
Excise duty on this amount @ 0% #REF! ED #REF! ED #REF!
Total Octroi as applicable for destination site/state on all items of supply, as per the provisions of the Bidding Documents, on all items of Schedule 1.
Amount on which Octroi is applicable Click here for details of Octroi
5 TOTAL ENTRY TAX
Total Entry Tax as applicable for destination site/state on all items of supply, as per the provisions of the Bidding Documents, on all items of Schedule 1.
Amount on which Entry Tax is applicable Click here for details of Entry Taxes
6 TOTAL OTHER TAXES & DUTIES
Total Others levies payable in India (please specify) as applicable for destination site/state on direct transaction items of supply, as per the provisions of the Bidding Documents, on all items of Schedule 1.
Amount on which Other Taxes & Duties are applicable Click here for details of Other Taxes & Duties
GRAND TOTAL [1+2+3] #REF! Grand Total after Discount 0.00 Grand Total after MPD 0.00
Above Grand Total does not include Octroi, Entry Tax , Other Taxes & Duties quoted by bidder at Sl. No. 4,5 & 6 above Plus Octroi, Entry Tax , Other Taxes & Duties quoted by bidder at Sl. No. 4,5 & 6 above
Note : The reimbursement of Excise Duty, Sales Tax/VAT and other levies as per Sl. No. 1, 2 & 3 above subject to provision of ITB Clause 11.4 shall be only against those items for which the Mode of Transaction indicated in Schedule - 1 is 'Direct'. In case of those items in the said Sechedule-1 against which the mode of transaction has been left blank, the same shall be deemed to be 'Bought-out' for the purpose of Evaluation and award of Contract and the price indicated in Schedule 1 against such items shall be deemed to be inclusive of all such taxes, duties and levies.
Date : 2-Sep-2020 Printed Name : xxx
Place : Shillong Designation : yyyy
AAABAAAAAAA- Schedule - 5
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
SUMMARY OF TAXES & DUTIES APPLICABLE ON GOODS
Bidder’s Name and Address (MSE) : To:
Chief General Manager (C&M)
Name : aaa Power Grid Corporation of India Limited
Address : bbb North Eastern Region
ccc Dongtieh, Lower Nongrah, Lapalang
ddd Shillong – 793 006 (Meghalaya).
Sl. No. Item Nos. Total Price (INR) After Discount After MPDiscount
1 TOTAL EXCISE DUTY #REF! Excise Duty 0 Excise Duty 0
Total Excise Duty for direct transaction between the Contractor and the Employer (identified in Schedule 1 as 'Direct') which are not included in the Ex-works price as per the provision of the Bidding Documents, as applicable.
Rate of Excise Duty for Direct items indicated in Sch-1 0.00%
2 TOTAL SALES TAX 0.00 Sales Tax 0.00 Sales Tax 0.00
Total Sales Tax for direct transaction between the Contractor and the Employer (identified in Schedule 1 as 'Direct') which are not included in the Ex-works price as per the provision of the Bidding Documents, as applicable. #DIV/0! 0 #DIV/0! 0
Amount on which Sales Tax is applicable [only ex-w price] 0 Amount #DIV/0! Amount #DIV/0!
Excise duty on this amount @ 0% 0 ED #DIV/0! ED #DIV/0!
Rate of Sales Tax 0.00%
3 TOTAL VAT #REF! Vat 0 Vat 0
Total VAT for direct transaction between the Contractor and the Employer (identified in Schedule 1 as 'Direct') which are not included in the Ex-works price as per the provision of the Bidding Documents, as applicable #REF! 0 #REF! 0
Amount on which VAT is applicable [only ex-w price] #REF! Amount #REF! Amount #REF!
Excise duty on this amount @ 0% #REF! ED #REF! ED #REF!
Rate of VAT 0.00%
Total Octroi as applicable for destination site/state on all items of supply, as per the provisions of the Bidding Documents, on all items of Schedule 1.
Amount on which Octroi is applicable Click here for details of Octroi
5 TOTAL ENTRY TAX
Total Entry Tax as applicable for destination site/state on all items of supply, as per the provisions of the Bidding Documents, on all items of Schedule 1.
Amount on which Entry Tax is applicable Click here for details of Entry Taxes
6 TOTAL OTHER TAXES & DUTIES
Total Others levies payable in India (please specify) as applicable for destination site/state on all items of supply, as per the provisions of the Bidding Documents, on all items of Schedule 1.
Amount on which Other Taxes & Duties are applicable Click here for details of Other Taxes & Duties
GRAND TOTAL [1+2+3] #REF! Grand Total after Discount 0.00 Grand Total after MPD 0.00
Above Grand Total does not include Octroi, Entry Tax , Other Taxes & Duties quoted by bidder at Sl. No. 4,5 & 6 above Plus Octroi, Entry Tax , Other Taxes & Duties quoted by bidder at Sl. No. 4,5 & 6 above
Note : The reimbursement of Excise Duty, Sales Tax/VAT and other levies as per Sl. No. 1, 2 & 3 above subject to provision of ITB Clause 11.4 shall be only against those items for which the Mode of Transaction indicated in Schedule - 1 is 'Direct'. In case of those items in the said Sechedule-1 against which the mode of transaction has been left blank, the same shall be deemed to be 'Bought-out' for the purpose of Evaluation and award of Contract and the price indicated in Schedule 1 against such items shall be deemed to be inclusive of all such taxes, duties and levies.
Date : 2-Sep-2020 Printed Name : #REF!
Place : Shillong Designation : #REF!
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC Schedule-IA to BPS (Vol-IC) Schedule - 1
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(SCHEDULE OF RATES AND PRICES)
Bidder’s Name and Address (MSE) : To:
Chief General Manager (C&M)
Name : aaa Power Grid Corporation of India Limited
Address : bbb North Eastern Region
ccc Dongtieh, Lower Nongrah, Lapalang
ddd Shillong – 793 006 (Meghalaya).
ERECTION WORK (CIVIL)
All Prices are in Indian Rupees. All Prices are in Indian Rupees.
SI. No. HSN/SAC Code Whether HSN in column ‘2’ is confirmed. If not, indicate applicable HSN code # Rate of GST applicable (in %) Whether rate of GST in column ‘3 is confirmed. If not indicate applicable rate of GST# (in %) DSR Item Description Unit Qty. Unit Ex-works price Total Ex-works price Mode of Transaction (Direct or Bought out)^ GST, Tax as confirmed by Bidder Total Value Applicable GST Rate GST on item
Construction of 02 Nos B-2-Type building at 220/132 kV Salakati Sub-station under ADD CAP 2019-24.
1 2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
3 2.26 Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
5 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
6 18% 4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) cum 12.265 6,939.46 85,112.48
7 5.33 DESIGN MIX CONCRETE Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work, using coarse aggregate and fine aggregates derived from natural sources, Potrland Puzzzolana/ Ordinary Portland/ Portland slag, admixutues in recommneded proportions as per IS: 9103 to accelerate/ retard setting of concrete to improve workability without impairing strength and including pumping of concrete to site of laying, curing, carriage for all leads but excluding cost of centering, shuttering, finishing & reinforcement as per direction of Engineer-in-charge. Concrete of M25 grade
8 18% 5.33.1 All works upto plinth level cum 46.755 8,772.42 410,154.50
9 18% 5.33.2 All works above plinth level upto floor V level cum 54.080 11,057.56 597,992.84
10 5.9 Centering and shuttering including strutting, propping etc. and removal of form for :
11 18% 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete sqm 74.100 337.81 25,031.72
12 18% 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers sqm 348.090 667.34 232,294.38
13 18% 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts sqm 111.750 882.23 98,589.20
14 18% 5.9.7 Stairs, (excluding landings) except spiral-staircases sqm 14.065 721.53 10,148.32
15 18% 5.9.3 Suspended floors, roofs, landings, balconies and access platform sqm 284.085 840.88 238,881.39
16 6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
17 18% 6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) sqm 49.630 9,337.47 463,418.64
18 6.13 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
19 18% 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) sqm 479.940 1,116.77 535,982.59
20 13.4 12 mm cement plaster of mix :
22 13.5 15 mm cement plaster on rough side of single or half brick wall of mix:
24 13.47 EXTERIOR FINISHING Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:
25 18% 13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) sqm 329.880 178.09 58,748.33
26 13.41 INTERIOR FINISHING Distempering with oil bound washable distemper (OBD) of approved brand and manufacture to give an even shade :
27 18% 13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer sqm 506.935 178.31 90,391.58
28 11.41 VITRIFIED FLOOR TILE Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
30 18% 16/8.31 CERAMIC GLAZED TILES Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. sqm 65.830 1,166.56 76,794.64
31 11.23 Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :
32 18% 11.23.5 Udaipur green marble sqm 12.035 2,304.06 27,729.36
33 18% 11.24 Extra for pre finished nosing to treads of steps of marble stone. Metre 26.000 650.83 16,921.58
34 8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
35 8.2.2 Granite of any colour and shade
37 8.3 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
38 18% 8.3.2 Granite work metre 8.200 459.46 3,767.57
39 18% 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm) sqm 139.920 849.32 118,836.85
40 12.21 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design
42 18% 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. each 1.000 292.45 292.45
43 18% 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. each 2.000 106.13 212.26
44 18% 9.141 Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge. Metre 87.350 507.07 44,292.56
45 9.142 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer-in-charge.
46 18% 27B/9.142.1 Decorative finish (wood grained finish) sqm 44.370 3,803.39 168,756.41
47 9.31 Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568, for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, as per directions of Engineer-in-charge: (Note:- Butt hinges and necessary screws shall be paid separately)
49 18% NS-1 Supplying and installing uPVC sliding windows made out of lead free, UV resistant green profile of BIS standard uPVC multichambered sections with corners fusion welded, fully reinforced with Galvanized steel atleat 1.5/2mm thick including interlock profile, glaxzing bead, grooving bead, brush seal, aluminium sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop-up handle, keeper, drain cap, fisher screws, packing pieces with all necessary SS screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside/outside of dowcorning/GE or equivalent complete as directed. with 5mm clear glass.(b) 2 track sliding window/openable without flyscreen using uPVC section of minimum sizes 58mm X 53mm X 2.4mm thick wall for frame, 37mm X 61mm X 2.4mm thick wall for glass sash & interlock: 43mm X 23mm (glass panel). Make: Sintex, Fenesta , Ozone ) (i) 2-3 panel with 5mm clear float glass sqm 22.140 7,516.51 166,415.53
50 18% NS-2 Supplying and installing uPVC sliding windows made out of lead free, UV resistant green profile of BIS standard uPVC multi chambered sections with corners fusion welded, fully reinforced with Galvanized steel atleast 1.5/2mm thick including interlock profile, glazing bead, grooving bead, brush seal, aluminum sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop-up handle, keeper, drain cap, fisher screws, packing pieces with all necessary SS screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside/outside of dowcorning/GE or equivalent complete as directed. with 5mm clear glass.(b) 2 track sliding window/openable without fly screen using uPVC section of minimum sizes 58mm X 53mm X 2.4mm thick wall for frame, 37mm X 61mm X 2.4mm thick wall for glass sash & interlock: 43mm X 23mm (glass panel). Make: Sintex, Fenesta , Ozone )(ii) 4-panel or more with 5mm clear float glass sqm 63.920 8,728.57 557,930.19
51 10.26 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
53 10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
54 18% 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works kg 351.320 156.10 54,841.05
55 9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
56 18% 9.48.1 Fixed to steel windows by welding kg 312.565 198.55 62,059.78
57 17.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
58 18% 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid each 4.000 6,077.79 24,311.16
59 17.19 Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.
60 18% 17.19.1 10 litre (full flush) capacity-white each 4.000 2,118.07 8,472.28
61 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
62 18% 17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps each 2.000 3,721.84 7,443.68
63 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
65 18% 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. each 2.000 1,547.98 3,095.96
66 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
67 18% 17.73.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. each 2.000 658.56 1,317.12
68 17 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
69 17.10.1 Kitchen sink with drain board
71 17.70 Providing and fixing PTMT Bottle Trap for Wash basin and sink
72 18% 17.70.2 Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gm each 4.000 356.63 1,426.52
73 18% 8 Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc.complete. 100sqm 5.000 521.66 2,608.30
74 10 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
76 9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
80 9 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
82 9 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade, with necessary screws etc. complete.
83 18% 9.101.2 Twin rubber stopper each 18.000 68.29 1,229.22
84 18% 10 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. each 12.000 896.77 10,761.24
85 9 Providing and fixing stainless steel (SS-304 grade) friction hinges to the side/top hung uPVC windows, of approved quality, with necessary stainless steel screws etc. as per direction of Engineer-in-charge.
87 5 STEEL REINFORCEMENT Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
88 18% 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 2185.550 98.34 214,926.99
89 5.22A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
90 18% 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 8718.220 98.34 857,349.75
91 18% 4 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. sqm 19.450 747.75 14,543.74
92 18% 4.11 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size). sqm 4.475 496.10 2,220.05
93 18% 4.12 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. per 50kg of cement 35.000 62.69 2,194.15
94 18% 4.13 Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. sqm 4.475 124.89 558.88
95 2.35 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment :
96 2.35.1 Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:
97 18% 2.35.1.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration Metre 19.450 35.43 689.11
98 18% 9.45 Providing and fixing teak wood lipping of size 25x3 mm in pelmet. Metre 24.600 67.46 1,659.52
99 10 Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.
101 9.92 Providing and fixing chromium plated brass handles with necessary screws etc. complete:
102 18% 9.92.2 100 mm (4 Nos. handles per cupboard) each 16.000 218.52 3,496.32
103 9 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.
104 18% 9.114.2 Double strip (horizontal type) (12 Nos. magnetic catcher per cupboard) each 48.000 37.46 1,798.08
105 9.61 Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete.
107 18% 9.112 Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge. Metre 121.600 93.90 11,418.24
108 9.47 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : (Hanger rods)
109 18% 9.47.1 20 mm dia (heavy type) -1 metre long Metre 8.000 167.46 1,339.68
110 9.13 Providing and fixing cup board shutters with 25 mm thick veneered particle board IS : 3097 marked, exterior grade (Grade I), of approved make, including IInd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge.
111 18% 9.130.1 With decorative veneering on one side and commercial veneering on other side sqm 24.000 1,830.06 43,921.44
112 9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).
113 18% 9.1.1 Second class teak wood cum 0.215 144,335.21 31,032.07
114 19.18 Supplying and fixing C.I. cover without frame for manholes :
115 18% 19.18.2 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg each 1.000 3,531.13 3,531.13
116 17.35 Providing and fixing soil, waste and vent pipes :
118 18% 17.35.1.1 Sand cast iron S&S pipe as per IS: 1729 each 1.000 1,116.77 1,116.77
119 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :
121 18% 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. cum 103.640 278.57 28,870.99
122 18% 2.27 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. cum 51.015 2,370.76 120,944.32
123 18% 10.17 10.17 Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. each 8.000 203.98 1,631.84
124 18.11 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :
125 18% 18.11.1 15 mm dia nominal bore (washroom and basin) metre 18.000 532.25 9,580.50
126 18% 18.11.2 20 mm dia nominal bore (washroom and basin) metre 9.000 593.57 5,342.13
127 18.15 Providing and fixing brass bib cock of approved quality :
129 18.16 Providing and fixing brass stop cock of approved quality:
131 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
133 18% 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. per litre 2000.000 10.64 21,280.00
134 18.75 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.
135 18% 18.75.1 15 mm nominal bore, weighing not less than 32 gms each 4.000 47.22 188.88
136 12.41 Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes
138 12.42 Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
139 12.42.1 Coupler
143 12.43 Providing and fixing Unplasticised -PVC pipe clips of approved design to Unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
145 22.70 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following perations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment etc.. All above operations to be done in order and as directed and specified by the Engineerin-Charge :
146 18% 22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm. sqm 129.565 1,670.63 216,455.18
147 18% 11.37 Providing and laying Antiskide Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete sqm 28.900 1,026.32 29,660.65
148 17.35.2 Providing and fixing soil, waste and vent pipes : 75 mm diameter :
149 18% 17.35.2.1 Sand cast iron S&S pipe as per IS: 1729 each 2.000 1,021.88 2,043.76
150 17.36 Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 (1cement:2fine sand) in SCI/ CI
152 17.58 Providing lead caulked joint to SCI/ centrifugally cast (Spun) iron pipes and fittings of diametre.
154 17.37 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :
155 18% 17.37.2 For 75 mm dia pipe (for vent pipes) each 2.000 333.97 667.94
156 19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
157 19.4.1 100x100 mm size P type
158 18% 19.4.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 3.000 2,691.46 8,074.38
159 17.39 Providing and fixing plain bend of required degree.
161 18% 17.39.1.1 Sand cast iron S&S pipe as per IS:1729 each 2.000 452.99 905.98
162 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
163 17.28.1 Semi regid pipe
165 19.32 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
166 18% 19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 1.000 30,746.97 30,746.97
167 19.7 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design :
168 19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
169 18% 19.7.1.1 With F.P.S. bricks with class designation 75 each 2.000 12,820.33 25,640.66
170 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :
172 19.3 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :
173 18% 19.3.5 300 mm diameter S.W. pipe metre 5.000 1,194.71 5,973.55
174 18% 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Each 4.000 1,033.51 4,134.04
175 18% 6.15 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. sqm 119.985 94.83 11,378.18
176 6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
177 18% 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 3.915 7,303.87 28,594.65
178 18% Analysis Construction of drains 300mm wide with 300mm depth by providing base PCC 1:4:8 and full brick wall of mortar 1:6 and plastering with a coat of neat cement pf mortar 1:4 (1 cement:4 fine sand) all complete including back filling. Mtr 75.000 2,134.21 160,065.75
179 18% 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth leve 4.1.3 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Cum 0.307 8,079.30 2,483.17
Total Estimate Cost for the Scheduled/DSR based Items [SCHEDULED-IA-B] 7,011,703.90
Note : Specify amount of GST on the transaction between the Contractor and the Employer.
# In case the bidder leaves the cell for confirmation of the HSN code and/or GST rate “blank”, the HSN code and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.
Date : 2-Sep-2020 Printed Name : xxx
Place : Shillong Designation : yyyy
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC Schedule-IA to BPS (Vol-IC) Schedule - 1
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(SCHEDULE OF RATES AND PRICES)
Bidder’s Name and Address (MSE) : To:
Chief General Manager (C&M)
Name : aaa Power Grid Corporation of India Limited
Address : bbb North Eastern Region
ccc Dongtieh, Lower Nongrah, Lapalang
ddd Shillong – 793 006 (Meghalaya).
ERECTION WORK (CIVIL)
All Prices are in Indian Rupees. All Prices are in Indian Rupees.
SI. No. HSN/SAC Code Whether HSN in column ‘2’ is confirmed. If not, indicate applicable HSN code # Rate of GST applicable (in %) Whether rate of GST in column ‘3 is confirmed. If not indicate applicable rate of GST# (in %) DSR Item Description Unit Qty. Unit Ex-works price Total Ex-works price Mode of Transaction (Direct or Bought out)^ GST, Tax as confirmed by Bidder Total Value Applicable GST Rate GST on item
Construction of 3 Nos. B1-Type building, 02 Nos B-2-Type building, 03 Nos B3-Type Building and dismantling of existing 08 Nos A-type building at 220/132 kV Salakati Sub-station under ADD CAP 2019-24.
1 2.8.1 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
3 2.26 Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
5 18% 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. cum 329.271 278.57 91,725.02
6 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :
7 18% 4.1.8 1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40 mm nominal size) cum 26.131 6,939.46 181,334.26
8 5.33 DESIGN MIX CONCRETE Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately).
9 18% 5.33.1 All works upto plinth level cum 49.760 8,772.75 436,535.22
10 18% 5.33.2 All works above plinth level upto floor V level cum 106.166 11,057.56 1,173,933.34
11 5.22.6 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.
12 18% 5.22.6 Thermo-Mechanically Treated bars. Kg 15592.604 98.34 1,533,376.67
13 6.1 Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in:
14 18% 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 15.768 7,303.87 115,165.71
15 6.4 Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :
16 18% 6.4.1 Cement mortar 1:4 (1 cement : 6 coarse sand) cum 65.918 9,337.47 615,510.57
17 6.13.2 Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level.
18 18% 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) cum 225.973 1,116.77 252,360.09
19 18% 6.15 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. sqm 225.973 94.83 21,429.04
20 13.1.2 12 mm cement plaster of mix :
22 13.2.2 15 mm cement plaster on the rough side of single or half brick wall of mix :
24 18% 2.27 2.27 Supplying and filling in plinth with Jamuna sand under floors including, watering, ramming consolidating and dressing complete. cum 20.284 2,370.76 48,087.54
25 18% 8.31 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. sqm 115.080 1,166.56 134,247.72
26 18% 11.37 11.37 Providing and laying Antiskide Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc, complete. sqm 61.440 1,026.32 63,057.10
27 11.41 VITRIFIED FLOOR TILE Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
29 11.23.5 Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :
30 18% 11.23.5 Udaipur green marble sqm 42.310 2,304.06 97,484.78
31 18% 11.24 Extra for pre finished nosing to treads of steps of marble stone. Metre 38.500 650.83 25,056.96
32 18% 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Each 8.000 923.81 7,390.48
33 8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
34 8.2.2 Granite of any colour and shade
36 8.3 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
38 18% 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm) sqm 281.400 849.32 238,998.65
39 12.21 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design
41 18% 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. each 6.000 292.45 1,754.70
42 18% 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. Each 8.000 106.13 849.04
43 22.7.1 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following perations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment etc. All above operations to be done in order and as directed and specified by the Engineerin-Charge :
44 18% 22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm. sqm 218.533 1,670.63 365,087.79
45 18% 10.17 10.17 Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. each 20.000 203.98 4,079.60
46 10.26.1 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer.
48 Providing and fixing soil waste and vent pipes
50 18% 17.35.1.1 Sand cast iron S&S pipe as per IS:1729 Mtr 63.800 1,116.77 71,249.93
52 18% 17.35.2.1 Sand cast iron S&S pipe as per IS:1729 Mtr 24.000 1,021.88 24,525.12
53 17.36.1 Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 (1cement:2fine sand) in SCI/ CI
55 17.58.1 Providing lead caulked joint to SCI/ centrifugally cast (Spun) iron pipes and fittings of diametre.
57 17.37.2 Providing and fixing MS holder bat clamps of approved design to SCI/ CI (Spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix including cost cutting holes and making good the walls.
59 17.39.1.1 Providing and fixing plain bend of required degree.
61 Sand cast iron S&S pipe as per IS:1729
62 19.4.1.1 Providing and fixing square- mouth S.W. gully trap grade A complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300mm size ( inside) the weight of cover to be not less than 4.50kg and frame to be not less than 2.70 kg as per standard design
63 18% 19.4.1.1 100x100mm size P type with FPS brick class designation 75 Each 6.000 2,691.46 16,148.76
64 17.7.4 Providing and fixing wash basin with C.I brackets 15 mm C.P. brass pillar taps 32 mm C.P. brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever require .
65 18% 17.7.4 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap Each 8.000 2,996.30 23,970.40
66 17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
67 18% 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid Each 8.000 6,077.79 48,622.32
68 17.10.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
69 17.10.1 Kitchen sink with drain board
71 17.70 Providing and fixing PTMT Bottle Trap for Wash basin and sink
72 18% 17.70.2 Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gm each 4.000 356.63 1,426.52
73 17.28.1.1 Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fitting complete
74 17.28.1 semi regid pipe
76 18% 17.29 17.29 Providing and fixing 100mm SCI iron grating for gully trap. Each 8.000 49.63 397.04
77 17.32.2 Providing and fixing mirror of superior glass (pf approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing
78 18% 17.32.2 Rectangular Shape 453x357mm Each 8.000 1,271.33 10,170.64
79 17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
80 18% 17.73.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. Each 8.000 658.56 5,268.48
81 18.11.2 Conceal pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall.
84 Providing and fixing GI pipes complete with GI fitings including trenching and refilling, etc
85 External work
86 18.15.1 Providing and fixing brass bib cock of approved quality
88 18.16.2 Providing and fixing stop cock of approved quality 0.00
90 18.22.1 Providing and fixing CP brass shower rose with 15 to 20mm inlet
92 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
94 18% 18.48 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Ltr. 4000.000 10.64 42,560.00
95 18.75 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.
96 18% 18.75.1 15 mm nominal bore, weighing not less than 32 gms each 12.000 47.22 566.64
97 13.47 EXTERIOR FINISHING Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:
98 18% 13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Sqm 589.366 178.09 104,960.19
99 13.41.1 Distempering with oil bound washable distemper of approved brand and manufacture to give and evenshade .
100 18% 13.41.1 (New work (two or more coats) over and including priming coat with cement primer. Sqm 1183.245 168.33 199,175.65
101 18% 4.17 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Sqm 171.248 747.75 128,050.32
102 13.62.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:
103 18% 13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture Sqm 20.837 209.96 4,374.89
104 12.41.2 Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes
106 12.42.1.2 Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
107 12.42.1Coupler
111 12.43.2 Providing and fixing Unplasticised -PVC pipe clips of approved design to Unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
113 19.7.1.1 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design :
114 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
115 18% 19.7.1.1 With F.P.S. bricks with class designation 75 Each 1.000 12,820.33 12,820.33
116 9.31.1 Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568, for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, as per directions of Engineer-in-charge: (Note:- Butt hinges and necessary screws shall be paid separately)
118 18% NS-1 Supplying and installing uPVC sliding windows made out of lead free, UV resistant green profile of BIS standard uPVC multichambered sections with corners fusion welded, fully reinforced with Galvanized steel atleat 1.5/2mm thick including interlock profile, glaxzing bead, grooving bead, brush seal, aluminium sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop-up handle, keeper, drain cap, fisher screws, packing pieces with all necessary SS screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside/outside of dowcorning/GE or equivalent complete as directed. with 5mm clear glass.(b) 2 track sliding window/openable without flyscreen using uPVC section of minimum sizes 58mm X 53mm X 2.4mm thick wall for frame, 37mm X 61mm X 2.4mm thick wall for glass sash & interlock: 43mm X 23mm (glass panel). Make: Sintex, Fenesta , Ozone ) (i) 2-3 panel with 5mm clear float glass cum 14.220 7,516.51 106,884.77
119 18% NS-2 Supplying and installing uPVC sliding windows made out of lead free, UV resistant green profile of BIS standard uPVC multi chambered sections with corners fusion welded, fully reinforced with Galvanized steel atleast 1.5/2mm thick including interlock profile, glazing bead, grooving bead, brush seal, aluminum sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop-up handle, keeper, drain cap, fisher screws, packing pieces with all necessary SS screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside/outside of dowcorning/GE or equivalent complete as directed. with 5mm clear glass.(b) 2 track sliding window/openable without fly screen using uPVC section of minimum sizes 58mm X 53mm X 2.4mm thick wall for frame, 37mm X 61mm X 2.4mm thick wall for glass sash & interlock: 43mm X 23mm (glass panel). Make: Sintex, Fenesta , Ozone )(ii) 4-panel or more with 5mm clear float glass cum 78.300 8,728.57 683,447.03
120 10.25.2 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
121 18% 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works Kg 676.309 156.10 105,571.87
122 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
123 18% 9.48.1Fixed to steel windows by welding Kg 625.130 198.55 124,119.56
124 9.96.1 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
126 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
130 9.100.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
132 9.101.2 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
133 18% 9.101.2 Twin rubber stopper Each 36.000 68.29 2,458.44
134 18% 9.88 9.88 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. Each 24.000 896.77 21,522.48
135 9.148.1 Providing and fixing stainless steel (SS-304 grade) friction hinges to the side/top hung uPVC windows, of approved quality, with necessary stainless steel screws etc. as per direction of Engineer-in-charge.
137 4.11 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size).
138 18% 4.11 Cupboard (opening from 1550 to 2000 mm) Sqm 35.011 496.10 17,368.76
139 18% 4.12 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. per 50kg of cement 30.000 62.69 1,880.70
140 18% 4.13 Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. sqm 35.010 124.89 4,372.40
141 2.35 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment:
142 2.35.1 Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:
143 18% 2.35.1.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration Metre 152.220 35.43 5,393.15
145 18% 9.45 9.45 Providing and fixing teak wood lipping of size 25x3 mm in pelmet. Mtr 49.200 67.46 3,319.03
146 9.9 Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.
148 9.92.2 Providing and fixing chromium plated brass handles with necessary screws etc. complete:
149 18% 9.92.2 100 mm (4 Nos. handles per cupboard) Each 32.000 218.52 6,992.64
150 9.114.2 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.
151 18% 9.114.2 Double strip (horizontal type) (12 Nos. magnetic catcher per cupboard) Each 96.000 37.46 3,596.16
152 9.61.1 Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete.
154 18% 9.112 9.112 Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge. Mtr 8.000 93.90 751.20
155 9.47.1 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : (Hanger rods)
156 18% 9.47.1 20 mm dia (heavy type) -1 metre long Mtr 8.000 167.46 1,339.68
157 9.130.1 Providing and fixing cup board shutters with 25 mm thick veneered particle board IS : 3097 marked, exterior grade (Grade I), of approved make, including IInd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge.
158 18% 9.130.1 With decorative veneering on one side and commercial veneering on other side sqm 48.000 1,830.06 87,842.88
159 9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).
160 18% 9.1.1 Second class teak wood cum 0.361 144,335.21 52,118.72
161 19.18.2 Supplying and fixing C.I. cover without frame for manholes :
162 18% 19.18.2 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg Each 4.000 3,531.13 14,124.52
163 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :
165 19.3 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :
167 5.9 Centering and shuttering including strutting, propping etc. and removal of form for :
168 18% 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete sqm 134.235 337.81 45,345.89
169 18% 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers sqm 331.380 667.34 221,143.13
170 18% 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts sqm 313.320 882.23 276,420.30
171 18% 5.9.7 Stairs, (excluding landings) except spiral-staircases sqm 28.130 721.53 20,296.64
172 18% 5.9.3 Suspended floors, roofs, landings, balconies and access platform sqm 326.150 840.88 274,253.01
173 5.22A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
174 18% 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 10616.568 98.34 1,044,033.26
175 18% 9.141 Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge. Metre 194.500 507.07 98,625.12
176 9.142 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer-in-charge.
177 18% 9.142.1 Decorative finish (wood grained finish) sqm 70.560 3,803.39 268,367.20
Total Estimate Cost for the Scheduled/DSR based Items [SCHEDULED-IA-C] 11,098,365.31
Note : Specify amount of GST on the transaction between the Contractor and the Employer.
# In case the bidder leaves the cell for confirmation of the HSN code and/or GST rate “blank”, the HSN code and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.
Date : 2-Sep-2020 Printed Name : xxx
Place : Shillong Designation : yyyy
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC Schedule-IA to BPS (Vol-IC) Schedule - 1
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(SCHEDULE OF RATES AND PRICES)
Bidder’s Name and Address (MSE) : To:
Chief General Manager (C&M)
Name : aaa Power Grid Corporation of India Limited
Address : bbb North Eastern Region
ccc Dongtieh, Lower Nongrah, Lapalang
ddd Shillong – 793 006 (Meghalaya).
ERECTION WORK (CIVIL)
All Prices are in Indian Rupees. All Prices are in Indian Rupees.
SI. No. HSN/SAC Code Whether HSN in column ‘2’ is confirmed. If not, indicate applicable HSN code # Rate of GST applicable (in %) Whether rate of GST in column ‘3 is confirmed. If not indicate applicable rate of GST# (in %) DSR Item Description Unit Qty. Unit Ex-works price Total Ex-works price Mode of Transaction (Direct or Bought out)^ GST, Tax as confirmed by Bidder Total Value Applicable GST Rate GST on item
Construction of 3 Nos. B1-Type building, 02 Nos B-2-Type building, 03 Nos B3-Type Building and dismantling of existing 08 Nos A-type building at 220/132 kV Salakati Sub-station under ADD CAP 2019-24.
1 18% 14.82 14.82 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. Each 16.00 121.43 1,942.88
2 18% 15.52 15.52 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. Each 16.00 816.80 13,068.80
3 15.2.1 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
4 18% 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) Cum 47.43 2201.72 104,427.58
5 18% 15.3 15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge Cum 208.80 3212.02 670,669.78
6 15.7.4 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
8 15.12.1 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
9 18% 15.12.1 Of area 3 sq. metres and below Each 128.00 332.05 42,502.40
10 15.14.1 Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead :
11 18% 15.14.1 Of sectional area 40 square centimetres and above Cum 10.14 4030.80 40,872.31
12 15.28.1 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:
14 15.44.1 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :
16 15.45.1 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge:
Total Estimate Cost for the Scheduled/DSR based Items [SCHEDULED-IA-D] 1,288,324.86
Note : Specify amount of GST on the transaction between the Contractor and the Employer.
# In case the bidder leaves the cell for confirmation of the HSN code and/or GST rate “blank”, the HSN code and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.
Date : 2-Sep-2020 Printed Name : xxx
Place : Shillong Designation : yyyy
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC Schedule-IA to BPS (Vol-IC) Schedule - 1
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(SCHEDULE OF RATES AND PRICES)
Bidder’s Name and Address (MSE) : To:
Chief General Manager (C&M)
Name : aaa Power Grid Corporation of India Limited
Address : bbb North Eastern Region
ccc Dongtieh, Lower Nongrah, Lapalang
ddd Shillong – 793 006 (Meghalaya).
SUMMARY OF CIVIL PORTION
All Prices are in Indian Rupees. All Prices are in Indian Rupees.
Sl. No. Description Amount Remarks
1 Total Estimate Cost for the Scheduled/DSR based Items [SCHEDULED-IA-A] 6,634,246.34
2 Total Estimate Cost for the Scheduled/DSR based Items [SCHEDULED-IA-B] 7,011,703.90
3 Total Estimate Cost for the Scheduled/DSR based Items [SCHEDULED-IA-C] 11,098,365.31
4 Total Estimate Cost for the Scheduled/DSR based Items [SCHEDULED-IA-D] 1,288,324.86
5 Total Estimated Cost 26,032,640.41
PERCENTAGE & AMOUNT QUOTED ABOVE THE ESTIMATED COST OR BELOW THE ESTIMATED COST IN FIGURES (=5) [For Negative percentage Quoting use "-" symbol before the figure] 0.00% 0.00
Total Bid Price for the Schedule-IA-A|IA-B|IA-C|-IA-D 26,032,640.41
Note : Specify amount of GST on the transaction between the Contractor and the Employer.
# In case the bidder leaves the cell for confirmation of the HSN code and/or GST rate “blank”, the HSN code and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.
Date : 2-Sep-2020 Printed Name : xxx
Place : Shillong Designation : yyyy
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC Schedule-IB to BPS (Vol-IC) Schedule - 1 Direct Total #REF! Micro and Small Enterprise (MSE) `
BO Total #REF! 0
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(SCHEDULE OF RATES AND PRICES)
Bidder’s Name and Address (MSE) : To:
Chief General Manager (C&M)
Name : aaa Power Grid Corporation of India Limited
Address : bbb North Eastern Region
ccc Dongtieh, Lower Nongrah, Lapalang
ddd Shillong – 793 006 (Meghalaya).
ELECTRICAL PORTION Direct
All Prices are in Indian Rupees. All Prices are in Indian Rupees. Bought-Out
SI. No. HSN/SAC Code Whether HSN in column ‘2’ is confirmed. If not, indicate applicable HSN code # Rate of GST applicable ( in %) Whether rate of GST in column ‘3 is confirmed. If not indicate applicable rate of GST# (in %) DSR 2018 Item Description Unit Qty. Unit Ex-works price Total Ex-works price Mode of Transaction (Direct or Bought out)^ GST, Tax as confirmed by Bidder Total Value Applicable GST Rate GST on item
Construction of 3 Nos. B1-Typeresidential building at 220/132 kV Salakati Sub-station under ADD CAP 2019-24.
SUB HEAD -I: WIRING
1 18% 1.10.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Group C) Point 82 1,101.20 90,298.40
2 18% 1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Point 4 1,175.72 4,702.88
3 18% 1.12 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. Meter 219 222.46 48,718.74
4 18% 1.57 Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. Each 9 710.77 6,396.93
5 SUB HEAD -II: TELEPHONE AND TV 0.00 0.00
6 1.18 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 0.00 0.00
8 18% 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. Meter 138 36.71 5,065.98
9 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 0.00 0.00
11 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 0.00 0.00
12 18% 1.24.6 Telephone socket outlet Each 9 132.37 1,191.33
13 18% 1.24.7 TV antenna socket outlet Each 9 132.37 1,191.33
14 SUB HEAD -III: SUB MAIN 0.00 0.00
15 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 0.00 0.00
17 18% 1.7.5 2 X 10 sq. mm + 1 X 6 sq. mm earth wire Meter 60 473.85 28,431.00
18 SUB HEAD -IV: FIXTURES 0.00 0.00
19 18% 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. Each 15 550.60 8,259.00
20 18% 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. Each 24 446.04 10,704.96
21 18% 1.56 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Each 9 647.37 5,826.33
22 1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 0.00 0.00
28 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 0.00 0.00
30 18% 1.24.4 3 pin 5/6 A socket outlet Each 12 123.47 1,481.64
31 18% 1.25 Supplying and fixing two module stepped type electronic fanregulator on the existing modular plate switch box includingconnections but excluding modular plate etc. as required. Each 12 380.41 4,564.92
32 18% 1.26 Supplying and fixing modular blanking plate on the existingmodular plate & switch box excluding modular plate asrequired. Each 13 35.59 462.67
33 18% 1.33 Supplying and fixing 3 pin, 5 A ceiling rose on the existingjunction box/ wooden block including connections etc. as required. Each 41 72.30 2,964.30
34 18% 1.58 Supplying and fixing PVC batten/ angle holder including connections etc. as required. Each 23 100.11 2,302.53
35 SUB HEAD -IV: INSTALATION, TESTING & COMMISSIONING 0.00 0.00
36 18% 1.35 Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. Each 25 109.01 2,725.25
37 18% 1.41 Installation, testing and commissioning of pre-wired,fluorescent fitting / compact fluorescent fitting of all types,complete with all accessories and tube/lamp etc. directly onceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. Each 14 186.87 2,616.18
38 18% 1.44 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. Each 12 190.21 2,282.52
39 18% 1.50.1 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required (Upto 450 mm sweep) Each 9 403.77 3,633.93
40 SUB HEAD -V: MCB'S AND MAIN DISTRIBUTION BOARDS 0.00 0.00
41 2.3 Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 0.00 0.00
43 2.1 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00 0.00
44 18% 2.10.1 Single pole 6 Amp Each 12 221.35 2,656.20
45 18% 2.10.1 Single pole 16 Amp Each 15 221.35 3,320.25
46 2.14 Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00 0.00
48 18% NS Fabrication, supply, erection and commissioning of distribution panel duly painted with apprved shade (approx. dimensions: 1250 mm wide x 1000 mm ht x 250 mm deep) fabricated out of 2 mm thick CRCA sheet with cover, hinges on one side, locking arrangement on the other side with following MCBs energy meters etc alongwith 0-500 voltmeter(96x96 mm), indicating lamps, toggle swith, slide lock fuse etc including interconnections as required. (1) Incoming 100 A - 4 pole RCCB with 300 mA current sensitivity - 1 no (2) DP 32 A MCB - 7 nos (3) 10-40 A, 1 - ph static Energy Meter - 5 nos (4) 4 strips 100 A tinned Copper Bus bar(50mm x 5mm x 500 mm) - I Set Each 1 38,931.25 38,931.25
49 18% 2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. Each 15 8.90 133.50
50 SUB HEAD -V: EARTHING AND LIGHTNING PROTECTION 0.00 0.00
51 18% 5.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm diaincluding accessories, and providing masonry enclosure withcover plate having locking arrangement and watering pipe etc.with charcoal/ coke and salt as required. Each 4 5,904.20 23,616.80
52 18% 5.12 Providing and laying earth connection from earth electrodewith 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earthelectrode including connection with G.I. thimble excavation and re-filling as required. Meter 15 209.12 3,136.80
53 18% 6.2 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. Each 1 498.32 498.32
54 18% 6.4 Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. Each 15 103.45 1,551.75
55 18% 6.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) Meter 15 115.68 1,735.20
56 18% 6.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) Meter 15 181.31 2,719.65
Total Bid Price for the Schedule-IB-A 453,324.33
Note : Specify amount of GST on the transaction between the Contractor and the Employer.
# In case the bidder leaves the cell for confirmation of the HSN code and/or GST rate “blank”, the HSN code and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.
Date : 2-Sep-2020 Printed Name : xxx
Place : Shillong Designation : yyyy
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC Schedule - 5
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(SUMMARY OF TAXES & DUTIES APPLICABLE ON PLANT & EQUIPMENT)
Bidder’s Name and Address (Sole Bidder) : To:
Chief General Manager (C&M)
Name : aaa Power Grid Corporation of India Limited
Address : bbb North Eastern Region
ccc Dongtieh, Lower Nongrah, Lapalang
ddd Shillong – 793 006 (Meghalaya).
Sl. No. Item Nos. Total Price (INR) After Discount After MPDiscount
1 TOTAL GST ON GOODS Excise Duty #REF! Excise Duty #REF!
Total GST for Supply of Goods (inter-alia including Type Test Charges) between the Contractor and the Employer (identified in Schedule 1') which are not included in the Ex-works price as per the provision of the Bidding Documents, as applicable. NA
2 TOTAL GST ON SERVICES Sales Tax 0.00 Sales Tax 0.00
Total GST on Civil Portion/Services (Schedule-IA and IB) #REF! #REF! #REF! #REF!
GRAND TOTAL [1+2] Grand Total after Discount #REF! Grand Total after MPD #REF!
Date : 2-Sep-2020 Printed Name : xxx
Place : Shillong Designation : yyyy
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC Schedule - 5
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
SUMMARY OF TAXES & DUTIES APPLICABLE ON GOODS
Bidder’s Name and Address (Sole Bidder) : To:
Contracts Services, 3rd Floor
Name : Power Grid Corporation of India Ltd.,
Address : "Saudamini", Plot No.-2
Gurgaon (Haryana) - 122001
Sl. No. Item Nos. Total Price (INR)
1 TOTAL GST ON GOODS #REF!
Total GST for Supply of Goods (inter-alia including Type Test Charges) between the Contractor and the Employer (identified in Schedule 1') which are not included in the Ex-works price as per the provision of the Bidding Documents, as applicable.
2 TOTAL GST ON SERVICES #REF!
Total GST on Installation Services (Schedule-3) and Training to be imparted in India (Schedule-4)
GRAND TOTAL [1+2] #REF!
Date : -- Printed Name :
Place : Designation :
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC Schedule-IB to BPS (Vol-IC) Schedule - 1 Direct Total #REF! Micro and Small Enterprise (MSE) `
BO Total #REF! 0
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(SCHEDULE OF RATES AND PRICES)
Bidder’s Name and Address (MSE) : To:
Chief General Manager (C&M)
Name : aaa Power Grid Corporation of India Limited
Address : bbb North Eastern Region
ccc Dongtieh, Lower Nongrah, Lapalang
ddd Shillong – 793 006 (Meghalaya).
ELECTRICAL PORTION Direct
All Prices are in Indian Rupees. All Prices are in Indian Rupees. Bought-Out
SI. No. HSN/SAC Code Whether HSN in column ‘5A’ is confirmed. If not, indicate applicable HSN code # Rate of GST applicable ( in %) Whether rate of GST in column ‘5D is confirmed. If not indicate applicable rate of GST# (in %) DSR 2018 Item Description Unit Qty. Unit Ex-works price Total Ex-works price Mode of Transaction (Direct or Bought out)^ GST, Tax as confirmed by Bidder Total Value Applicable GST Rate GST on item
Construction of 02 Nos B-2-Type building at 220/132 kV Salakati Sub-station under ADD CAP 2019-24.
SUB HEAD -I: WIRING
1 1.10.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Group C) Point 64 1,101.20 70,476.80
2 1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Point 4 1,175.72 4,702.88
3 1.12 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. Meter 146 222.46 32,479.16
4 1.57 Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. Each 6 710.77 4,264.62
5 SUB HEAD -II: TELEPHONE AND TV
6 1.18 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
8 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. Meter 102 36.71 3,744.42
9 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 0.00 0.00
11 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
12 1.24.6 Telephone socket outlet Each 8 132.37 1,058.96
13 1.24.7 TV antenna socket outlet Each 8 132.37 1,058.96
14 SUB HEAD -III: SUB MAIN
15 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
16 1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Meter 264 254.72 67,246.08
17 1.7.5 2 X 10 sq. mm + 1 X 6 sq. mm earth wire Meter 40 473.85 18,954.00
18 SUB HEAD -IV: FIXTURES
19 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. Each 10 550.60 5,506.00
20 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. Each 18 446.04 8,028.72
21 1.56 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Each 6 647.37 3,884.22
22 1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
28 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
30 1.24.4 3 pin 5/6 A socket outlet Each 12 123.47 1,481.64
31 1.25 Supplying and fixing two module stepped type electronic fanregulator on the existing modular plate switch box includingconnections but excluding modular plate etc. as required. Each 10 380.41 3,804.10
32 1.26 Supplying and fixing modular blanking plate on the existingmodular plate & switch box excluding modular plate asrequired. Each 10 35.59 355.90
33 1.33 Supplying and fixing 3 pin, 5 A ceiling rose on the existingjunction box/ wooden block including connections etc. as required. Each 32 72.30 2,313.60
34 1.58 Supplying and fixing PVC batten/ angle holder including connections etc. as required. Each 17 100.11 1,701.87
35 SUB HEAD -IV: INSTALATION, TESTING & COMMISSIONING
36 1.35 Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. Each 20 109.01 2,180.20
37 1.41 Installation, testing and commissioning of pre-wired,fluorescent fitting / compact fluorescent fitting of all types,complete with all accessories and tube/lamp etc. directly onceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. Each 12 186.87 2,242.44
38 1.44 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. Each 10 190.21 1,902.10
39 1.50.1 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required (Upto 450 mm sweep) Each 6 403.77 2,422.62
40 SUB HEAD -V: MCB'S AND MAIN DISTRIBUTION BOARDS
41 2.3 Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
42 2.3.4 16 way, Double door Each 2 2,728.52 5,457.04
43 2.1 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
44 2.10.1 Single pole 6 Amp Each 10 221.35 2,213.50
45 2.10.1 Single pole 16 Amp Each 10 221.35 2,213.50
46 2.14 Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
48 NS Fabrication, supply, erection and commissioning of distribution panel duly painted with apprved shade (approx. dimensions: 1250 mm wide x 1000 mm ht x 250 mm deep) fabricated out of 2 mm thick CRCA sheet with cover, hinges on one side, locking arrangement on the other side with following MCBs energy meters etc alongwith 0-500 voltmeter(96x96 mm), indicating lamps, toggle swith, slide lock fuse etc including interconnections as required. (1) Incoming 100 A - 4 pole RCCB with 300 mA current sensitivity - 1 no (2) DP 32 A MCB - 7 nos (3) 10-40 A, 1 - ph static Energy Meter - 5 nos (4) 4 strips 100 A tinned Copper Bus bar(50mm x 5mm x 500 mm) - I Set Each 1 38,931.25 38,931.25
49 2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. Each 8 8.90 71.20
SUB HEAD -V: EARTHING AND LIGHTNING PROTECTION
51 5.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm diaincluding accessories, and providing masonry enclosure withcover plate having locking arrangement and watering pipe etc.with charcoal/ coke and salt as required. Each 4 5,904.20 23,616.80
52 5.12 Providing and laying earth connection from earth electrodewith 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earthelectrode including connection with G.I. thimble excavation and re-filling as required. Meter 15 209.12 3,136.80
53 6.2 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. Each 1 498.32 498.32
54 6.4 Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. Each 10 103.45 1,034.50
55 6.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) Meter 10 115.68 1,156.80
56 6.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) Meter 10 181.31 1,813.10
Total Bid Price for the Schedule-IB-B 349,404.66 0
Note : Specify amount of GST on the transaction between the Contractor and the Employer.
# In case the bidder leaves the cell for confirmation of the HSN code and/or GST rate “blank”, the HSN code and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.
Date : 2-Sep-2020 Printed Name : xxx
Place : Shillong Designation : yyyy
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC Schedule-IB to BPS (Vol-IC) Schedule - 1 Direct Total #REF! Micro and Small Enterprise (MSE) `
BO Total #REF! 0
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(SCHEDULE OF RATES AND PRICES)
Bidder’s Name and Address (MSE) : To:
Chief General Manager (C&M)
Name : aaa Power Grid Corporation of India Limited
Address : bbb North Eastern Region
ccc Dongtieh, Lower Nongrah, Lapalang
ddd Shillong – 793 006 (Meghalaya).
ELECTRICAL PORTION Direct
All Prices are in Indian Rupees. All Prices are in Indian Rupees. Bought-Out
SI. No. HSN/SAC Code Whether HSN in column ‘5A’ is confirmed. If not, indicate applicable HSN code # Rate of GST applicable ( in %) Whether rate of GST in column ‘5D is confirmed. If not indicate applicable rate of GST# (in %) DSR 2018 Item Description Unit Qty. Unit Ex-works price Total Ex-works price Mode of Transaction (Direct or Bought out)^ GST, Tax as confirmed by Bidder Total Value Applicable GST Rate GST on item
Construction of 3 Nos. B1-Type building, 02 Nos B-2-Type building, 03 Nos B3-Type Building and dismantling of existing 08 Nos A-type building at 220/132 kV Salakati Sub-station under ADD CAP 2019-24.
SUB HEAD -I: WIRING
1 18% 1.10.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Group C) Point 94 1,101.20 103,512.80
2 18% 1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Point 5 1,175.72 5,878.60
3 18% 1.12 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. Meter 243 222.46 54,057.78
4 18% 1.57 Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. Each 9 710.77 6,396.93
5 SUB HEAD -II: TELEPHONE AND TV
6 1.18 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
8 18% 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. Meter 171 36.71 6,277.41
9 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
11 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
12 18% 1.24.6 Telephone socket outlet Each 12 132.37 1,588.44
13 18% 1.24.7 TV antenna socket outlet Each 12 132.37 1,588.44
14 SUB HEAD -III: SUB MAIN
15 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
17 18% 1.7.5 2 X 10 sq. mm + 1 X 6 sq. mm earth wire Meter 60 473.85 28,431.00
18 SUB HEAD -IV: FIXTURES
19 18% 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. Each 15 550.60 8,259.00
20 18% 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. Each 27 446.04 12,043.08
21 18% 1.56 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Each 9 647.37 5,826.33
22 1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
29 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
31 18% 1.24.4 3 pin 5/6 A socket outlet Each 18 123.47 2,222.46
32 18% 1.25 Supplying and fixing two module stepped type electronic fanregulator on the existing modular plate switch box includingconnections but excluding modular plate etc. as required. Each 15 380.41 5,706.15
33 18% 1.26 Supplying and fixing modular blanking plate on the existingmodular plate & switch box excluding modular plate asrequired. Each 18 35.59 640.62
34 18% 1.33 Supplying and fixing 3 pin, 5 A ceiling rose on the existingjunction box/ wooden block including connections etc. as required. Each 47 72.30 3,398.10
35 18% 1.58 Supplying and fixing PVC batten/ angle holder including connections etc. as required. Each 26 100.11 2,602.86
36 SUB HEAD -IV: INSTALATION, TESTING & COMMISSIONING
37 18% 1.35 Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. Each 29 109.01 3,161.29
38 18% 1.41 Installation, testing and commissioning of pre-wired,fluorescent fitting / compact fluorescent fitting of all types,complete with all accessories and tube/lamp etc. directly onceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. Each 17 186.87 3,176.79
39 18% 1.44 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. Each 15 190.21 2,853.15
40 18% 1.50.1 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required (Upto 450 mm sweep) Each 9 403.77 3,633.93
41 SUB HEAD -V: MCB'S AND MAIN DISTRIBUTION BOARDS
42 2.3 Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
44 2.1 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
45 18% 2.10.1 Single pole 6 Amp Each 15 221.35 3,320.25
46 18% 2.10.1 Single pole 16 Amp Each 15 221.35 3,320.25
47 2.14 Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
49 18% NS Fabrication, supply, erection and commissioning of distribution panel duly painted with apprved shade (approx. dimensions: 1250 mm wide x 1000 mm ht x 250 mm deep) fabricated out of 2 mm thick CRCA sheet with cover, hinges on one side, locking arrangement on the other side with following MCBs energy meters etc alongwith 0-500 voltmeter(96x96 mm), indicating lamps, toggle swith, slide lock fuse etc including interconnections as required. (1) Incoming 100 A - 4 pole RCCB with 300 mA current sensitivity - 1 no (2) DP 32 A MCB - 7 nos (3) 10-40 A, 1 - ph static Energy Meter - 5 nos (4) 4 strips 100 A tinned Copper Bus bar(50mm x 5mm x 500 mm) - I Set Each 1 38,931.25 38,931.25
50 18% 2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. Each 12 8.90 106.80
51 SUB HEAD -V: EARTHING AND LIGHTNING PROTECTION
52 18% 5.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm diaincluding accessories, and providing masonry enclosure withcover plate having locking arrangement and watering pipe etc.with charcoal/ coke and salt as required. Each 4 5,904.20 23,616.80
53 18% 5.12 Providing and laying earth connection from earth electrodewith 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earthelectrode including connection with G.I. thimble excavation and re-filling as required. Meter 20 209.12 4,182.40
54 18% 6.2 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. Each 1 498.32 498.32
55 18% 6.4 Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. Each 15 103.45 1,551.75
56 18% 6.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) Meter 15 115.68 1,735.20
57 18% 6.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) Meter 15 181.31 2,719.65
58 POWER CABLES
59 HEAD-1 SERVICE
60 7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning,protective covering and refilling the trench etc as required.
62 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
Total Bid Price for the Schedule-IB-C 589,974.25 0
Note : Specify amount of GST on the transaction between the Contractor and the Employer.
# In case the bidder leaves the cell for confirmation of the HSN code and/or GST rate “blank”, the HSN code and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.
Date : 2-Sep-2020 Printed Name : xxx
Place : Shillong Designation : yyyy
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC Schedule-IA to BPS (Vol-IC) Schedule - 1
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(SCHEDULE OF RATES AND PRICES)
Bidder’s Name and Address (MSE) : To:
Chief General Manager (C&M)
Name : aaa Power Grid Corporation of India Limited
Address : bbb North Eastern Region
ccc Dongtieh, Lower Nongrah, Lapalang
ddd Shillong – 793 006 (Meghalaya).
SUMMARY OF ELECTRICAL PORTION
All Prices are in Indian Rupees. All Prices are in Indian Rupees.
Sl. No. Description Amount Remarks
1 Total Estimate Cost for the Scheduled/DSR based Items [SCHEDULED-IB-A] 453,324.33
2 Total Estimate Cost for the Scheduled/DSR based Items [SCHEDULED-IB-B] 349,404.66
3 Total Estimate Cost for the Scheduled/DSR based Items [SCHEDULED-IB-C] 589,974.25
4 Total Estimated Cost 1,392,703.24
PERCENTAGE & AMOUNT QUOTED ABOVE THE ESTIMATED COST OR BELOW THE ESTIMATED COST IN FIGURES (=4) [For Negative percentage Quoting use "-" symbol before the figure] 0.00% 0.00
Total Bid Price for the Schedule-IB-A|IB-B|IB-C 1,392,703.24
Note : Specify amount of GST on the transaction between the Contractor and the Employer.
# In case the bidder leaves the cell for confirmation of the HSN code and/or GST rate “blank”, the HSN code and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.
Date : 2-Sep-2020 Printed Name : xxx
Place : Shillong Designation : yyyy
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC Schedule-IB to BPS (Vol-IC) Schedule - 1 Direct Total #REF! Micro and Small Enterprise (MSE) `
BO Total #REF! 0
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(SCHEDULE OF RATES AND PRICES)
Bidder’s Name and Address (MSE) : To:
Chief General Manager (C&M)
Name : aaa Power Grid Corporation of India Limited
Address : bbb North Eastern Region
ccc Dongtieh, Lower Nongrah, Lapalang
ddd Shillong – 793 006 (Meghalaya).
ELECTRICAL PORTION Direct
All Prices are in Indian Rupees. All Prices are in Indian Rupees. Bought-Out
SI. No. HSN/SAC Code Whether HSN in column ‘5A’ is confirmed. If not, indicate applicable HSN code # Rate of GST applicable ( in %) Whether rate of GST in column ‘5D is confirmed. If not indicate applicable rate of GST# (in %) DSR 2018 Item Description Unit Qty. Unit Ex-works price Total Ex-works price Mode of Transaction (Direct or Bought out)^ GST, Tax as confirmed by Bidder Total Value Applicable GST Rate GST on item
Construction of 3 Nos. B1-Typeresidential building at 220/132 kV Salakati Sub-station under ADD CAP 2019-24.
HEAD -2: Supply
1 18% NS Ceiling Fan (1200 mm sweep, Double bearing) Nos 12 0.00
2 18% NS Exhaust fan (450 mm sweep for kitchen) Nos 3 0.00
3 18% NS Exhaust Fans 250 mm sweep for toilet (with louver having bird screen) Nos 6 0.00
4 18% NS 20 W LED Tube Light set Nos 14 0.00
5 18% NS Bracket Light Nos 18 0.00
6 18% NS Spot light/ Down light (9W LED Light) Nos 23 0.00
7 18% NS Bulk Head Light Nos 4 0.00
8 18% NS Modular Indicator for switchboard Nos 12 0.00
9 18% NS Chandilier Nos 3 0.00
10 18% NS Bell Nos 3 0.00
11 18% NS Krone type Distribution Board 20 pair Nos 1 0.00
Sub-Total [B1 QUARTER] 0.00
Construction of 02 Nos B-2-Type building at 220/132 kV Salakati Sub-station under ADD CAP 2019-24.
HEAD -2: Supply
1 18% NS Ceiling Fan (1200 mm sweep) Nos 10 0.00
2 18% NS Exhaust fan (450 mm sweep for kitchen) Nos 2 0.00
3 18% NS Exhaust Fans 250 mm sweep for toilet (with louver having bird screen) Nos 4 0.00
4 18% NS 20 W LED Tube Light Nos 12 0.00
5 18% NS Bracket Light Nos 14 0.00
6 18% NS Spot light/ Down light (9W LED Light) Nos 18 0.00
7 18% NS Bulk Head Light Nos 2 0.00
8 18% NS Modular Indicator for switchboard Nos 10 0.00
9 18% NS Chandilier Nos 2 0.00
10 18% NS Bell Nos 2 0.00
11 18% NS Krone type Distribution Board 20 pair Nos 1 0.00
Sub-Total [B2 QUARTER] 0.00
Construction of 3 Nos. B1-Type building, 02 Nos B-2-Type building, 03 Nos B3-Type Building and dismantling of existing 08 Nos A-type building at 220/132 kV Salakati Sub-station under ADD CAP 2019-24.
HEAD -2: Supply
1 18% NS Ceiling Fan (1200 mm sweep) Nos 15 0.00
2 18% NS Exhaust fan (450 mm sweep for kitchen) Nos 3 0.00
3 18% NS Exhaust Fans 250 mm sweep for toilet (with louver having bird screen) Nos 6 0.00
4 18% NS 20 W LED Tube Light Nos 17 0.00
5 18% NS Bracket Light Nos 21 0.00
6 18% NS Spot light/ Down light (9W LED Light) Nos 26 0.00
7 18% NS Bulk Head Light Nos 5 0.00
8 18% NS Modular Indicator for switchboard Nos 15 0.00
9 18% NS Chandilier Nos 3 0.00
10 18% NS Bell Nos 3 0.00
11 18% NS Krone type Ditribution Board 20 pair Nos 1 0.00
Sub-Total [B3 QUARTER] 0.00
HEAD -2: SUPPLY
1 18% PSOR,Sept21 1.1kV Grade PVC insulated Power Cable 3½ X 35 sq. mm kM 0.5 0.00
Sub-Total [POWER Cables] 0.00
Total Bid Price for the Schedule-ID [Non-Scheduled Items] 0.00 0
Note : Specify amount of GST on the transaction between the Contractor and the Employer.
# In case the bidder leaves the cell for confirmation of the HSN code and/or GST rate “blank”, the HSN code and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.
Date : 2-Sep-2020 Printed Name : xxx
Place : Shillong Designation : yyyy
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC Schedule -3
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(GRAND SUMMARY)
Bidder’s Name and Address (MSE) : To:
Chief General Manager (C&M)
Name : aaa Power Grid Corporation of India Limited
Address : bbb North Eastern Region
ccc Dongtieh, Lower Nongrah, Lapalang
ddd Shillong – 793 006 (Meghalaya).
Sl. No. Description Total Price (INR)
1 TOTAL SCHEDULE NO. IA 26,032,640.41
1.1 Civil Portion [DSR Based Items] Scheduled-IA-A
1.2 Civil Portion [DSR Based Items] Scheduled-IA-B
1.3 Civil Portion [DSR Based Items] Scheduled-IA-C
2 TOTAL SCHEDULE -IB 1,392,703.24
2.1 Electrical Portion [DSR Based Items] Scheduled-IB-A
2.2 Electrical Portion [DSR Based Items] Scheduled-IB-B
2.3 Electrical Portion [DSR Based Items] Scheduled-IB-C
3 TOTAL SCHEDULE NO. IC 0.00
3.1 Non-Scheduled Items
Date : 2-Sep-2020 Printed Name : xxx
Place : Shillong Designation : yyyy
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC Schedule - 6 After Discount
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
(GRAND SUMMARY : AFTER DISCOUNT)
Bidder’s Name and Address (MSE) : To:
Chief General Manager (C&M)
Name : aaa Power Grid Corporation of India Limited
Address : bbb North Eastern Region
ccc Dongtieh, Lower Nongrah, Lapalang
ddd Shillong – 793 006 (Meghalaya).
Sl. No. Description Total Price (INR)
1 TOTAL SCHEDULE NO. 1 #REF!
Ex-works price of Plant and Equipment
2 TOTAL SCHEDULE NO. 2 #REF!
Local Transportation, Insurance and other Incidental Services
3 TOTAL SCHEDULE NO. 3 #REF!
Installation Charges
4 TOTAL SCHEDULE NO. 4 #REF!
Training Charges
5 TOTAL SCHEDULE NO. 5 #REF!
Taxes and Duties
6 TOTAL SCHEDULE NO. 7 #REF!
Type Test Charges [Total of this Schedule is included in Schedule - 1 above.]
GRAND TOTAL [1+2+3+4+5+6] #REF!
Date : 2-Sep-2020 Printed Name : xxx
Place : Shillong Designation : yyyy
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC Schedule 7
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS. As per Lum-sum 0.00%
(SCHEDULE OF RATES AND PRICES) AS per Percent #REF!
As per lum-sum on Sch-7 0.00%
Bidder’s Name and Address (MSE) : To: As per Percent on Sch-7 #REF!
Chief General Manager (C&M) Total Discount #REF!
Name : aaa Power Grid Corporation of India Limited
Address : bbb North Eastern Region
ccc Dongtieh, Lower Nongrah, Lapalang Multipackage Discount 0.0000%
ddd Shillong – 793 006 (Meghalaya).
Sl. no. Equipment Description of type test Type test Charges (INR) Type Tests Charges (INR)
1 500 MVA, 400/220kV Auto Transformer (i) Temperature Rise test
(ii) Zero sequence reactance measurement
(iii) Acoustic Noise level measurement
(iv) Measurement of power taken by fan and oil pumps
(v) Measurement of harmonic level at no-load current
(vi) Short Duration (ACSD) AC withstand Test
2 125 MVAR, 420kV Bus Reactor (i) Temperature rise test
(ii) Zero Sequence Reactance measurement
(iii) Acoustic noise level measurement
(iv) Measurement of Harmonic content of current(Measured in cold state)
(v) Measurement of Knee Point Voltage
3 160 MVA, 220/1321kV Auto Transformer (i) Temperature Rise test
(ii) Zero sequence reactance measurement
(iii) Acoustic Noise level measurement
(iv) Measurement of power taken by fan and oil pumps
(v) Measurement of harmonic level at no-load current
Total of Type Test Charges
Discount Sche-7 #REF! MPD Sche-7 #REF!
Date : 2-Sep-2020 Printed Name : xxx
Place : Shillong Designation : yyyy
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS. 0 0 0
(SCHEDULE OF RATES AND PRICES) 0 0 0
Bidder’s Name and Address (MSE) : 0
Address : bbb 0 0
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS. As per Lum-sum 0.00%
(SCHEDULE OF RATES AND PRICES : TYPE TEST CHARGES) AS per Percent #REF!
As per lum-sum on Sch-7 0.00%
Bidder’s Name and Address (MSE) : To: As per Percent on Sch-7 #REF!
Chief General Manager (C&M) Total Discount #REF!
Name : aaa Power Grid Corporation of India Limited
Address : bbb North Eastern Region
ccc Dongtieh, Lower Nongrah, Lapalang Multipackage Discount 0.0000%
ddd Shillong – 793 006 (Meghalaya).
Type Tests on Earthwire
SL. NO. Description of Test Unit Quantity Unit Test Charge Total Test Charges (Rs.) Total Test Charges After Discount (Rs.) Dis Alert Total Test Charges After MPD (Rs.)
(a) #REF! #REF! #REF! #REF! #REF!
(b) #REF! #REF! #REF! #REF! #REF!
Sub-Total (A.1) #REF!
TOTAL TEST CHARGES #REF!
Discount Sche-7 #REF! MPD Sche-7 #REF!
Dis Alert #REF!
Date : 2-Sep-2020 #REF!
Place : Shillong #REF!
Note : Bidder should indicate the name of test laboratories where type tests are proposed to be conducted
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS. 0 0 0
(SCHEDULE OF RATES AND PRICES : TYPE TEST CHARGES) 0 0 0
Bidder’s Name and Address (MSE) : 0
Address : bbb 0 0
SL. NO. Description of Test 0
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC (Guarantee Declaration)
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS. As per Lum-sum 0.00%
(GUARANTEED DECLARATION ) AS per Percent #REF!
As per lum-sum on Sch-7 0.00%
Bidder’s Name and Address (MSE) : To: As per Percent on Sch-7 #REF!
Chief General Manager (C&M) Total Discount #REF!
Name : aaa Power Grid Corporation of India Limited
Address : bbb North Eastern Region
ccc Dongtieh, Lower Nongrah, Lapalang Multipackage Discount 0.0000%
ddd Shillong – 793 006 (Meghalaya).
We declare that the ratings, performance figures and availability of the system furnished by us for subject Package covered under this specification are guaranteed by us. We further declare that in the event of any deficiencies in meeting the guarantees in respect of the characteristics mentioned below as established after conducting the factory test, you may at your discretion, reject or accept the equipment after assessing the liquidated damages as specified in the relevant clauses of Bid document.
Equipment Guaranteed losses at rated output (applicable for each item/unit of the facilities) per Unit in KW
Copper Loss at 75 degree C at rated current Iron loss at rated voltage and frequency Cooler loss (Power consumption by all fans & pumps, except standby one) at rated voltage & frequency
500 MVA, 400/220/33kV three Phase Auto Transformer
160 MVA, 220/132/33kV three Phase Auto Transformer
630kVA, 33/0.433kV LT Transformer
Guaranteed loss at rated Voltage & Frequency (applicable for each item/unit of the facilities) per Unit in KW
125 MVAR, 420kV 3ph. Bus Reactor
Discount Sche-7 #REF! MPD Sche-7 #REF!
Dis Alert #REF!
Date : 2-Sep-2020 #REF! xxx
Place : Shillong #REF! yyyy
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS. 0 0 0
(GUARANTEED DECLARATION ) 0 0 0
Bidder’s Name and Address (MSE) : 0
Address : bbb 0 0
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
Specification No: CC-CS/165-NER/SS-3864/3/G10 Schedule 7
Substation packages ARP-SS-05 including 132kV Class Transformer & Reactor under Comprehensive Scheme for Strengthening of Transmission & Distribution System in NER & Sikkim : Intra-State : Arunachal Pradesh As per Lum-sum 0.00%
(SCHEDULE OF RATES AND PRICES ) AS per Percent #REF!
As per lum-sum on Sch-7 0.00%
Bidder’s Name and Address (Lead Partner) : To: As per Percent on Sch-7 #REF!
Contracts Services, 3rd Floor Total Discount #REF!
Name : aaa Power Grid Corporation of India Ltd.,
Address : bbb "Saudamini", Plot No.-2
ccc Sector-29, Multipackage Discount 0.0000%
ddd Gurgaon (Haryana) - 122001
Type tests charges
SL. NO. PR No Line Item No Code HSN Code Whether HSN in column ‘2’ is confirmed. If not indicate applicable the HSN code * Rate of GST applicable ( in %) Whether rate of GST in column ‘4’ is confirmed. If not indicate applicable rate of GST * Description of Test Unit Quantity Unit Test Charge Total Test Charges (Rs.) name of test laboratories where type tests are proposed to be conducted Total GST as confirmed by Bidder Revaluation of M column Tax Calculation Total Test Charges After Discount (Rs.) Dis Alert Total Test Charges After MPD (Rs.)
NOT APPLICABLE 0 0.00
TOTAL TYPE TEST CHARGES
Total GST as confirmed by Bidder 0.00
Date : 2-Sep-2020 Printed Name : xxx
Place : Shillong Designation : yyyy
Note : Bidder should indicate the name of test laboratories where type tests are proposed to be conducted
Specification No: CC-CS/165-NER/SS-3864/3/G10
Substation packages ARP-SS-05 including 132kV Class Transformer & Reactor under Comprehensive Scheme for Strengthening of Transmission & Distribution System in NER & Sikkim : Intra-State : Arunachal Pradesh 0 0
(SCHEDULE OF RATES AND PRICES ) 0 0
Bidder’s Name and Address (Lead Partner) :
SL. NO. Description of Test #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
Spec. No.: NESH/CSM/SRM/OT/1500-1087/BPS-VOL-IC Letter of Discount
LETTER OF DISCOUNT
Contract Services
Power Grid Corporation of India Ltd.,
"Saudamini", Plot No.-2
Sector-29, (near IFFCO Chowk)
Gurgaon (Haryana) - 122001
Subject : Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS.
With reference to the subject tender, we hereby offer unconditional discount on the prices quoted by us as per details given here below : Eq Weightage of Rs/ % Final Discount Factor
1 Discount on lum-sum basis on total price quoted by us without Taxes & Duties. [The discount shall be proportionately applicable on all the items of all the Schdules i.e. Sch-1, Sch-2 and Sch-3] In Rs. #REF! #REF!
2 Discount on percent basis on total price quoted by us without Taxes & Duties. [The discount shall be proportionately applicable on all the items of all the Schdules i.e. Sch-1, Sch-2 and Sch-3 ] In Percent (%) #REF! 0.0000000000%
3 Discount on lum-sum basis on the Schedules as given below : [The discount shall be proportionately applicable on all the relevent items of the respective Schdules.] In Rs.
Schedule-1 : Ex works prices In Rs. #REF! #REF! Schedule-1 : Supply #REF! #REF! #REF! #REF!
Schedule-1 : Ex works prices (Bought Out Only) In Rs. #REF! #REF! Schedule-1 : (Bought Out Only) #REF! #REF! #REF!
Schedule-2 : Freight & Insurance In Rs. 0.00 0.0000000000% Schedule-2 : Freight & Insurance #REF! #REF! #REF! #REF!
Schedule-3 : Erection Charges In Rs. 0.00 0.0000000000% Schedule-3 : Erection Charges #REF! #REF! #REF! #REF!
Schedule-4 : Training Charges Not Applicable In Rs. 0.00 0.0000000000% Schedule-4 : Training Charges #REF! #REF! #REF! #REF!
0.0000000000% #REF! #REF! #REF! #REF!
Schedule-7 : Type tests Charges Not Applicable In Rs. 0.00 0.0000000000% Schedule-7 : Type tests Charges #REF! #REF! #REF! #REF!
4 Discount on percent basis on the Schedules as given below : [The discount shall be proportionately applicable on all the relevent items of the respective Schdules.] In Percent (%)
Schedule-1 : Ex works prices In Percent (%) #REF! 0.00%
Schedule-2 : Freight & Insurance In Percent (%) 0.00 0.00%
Schedule-3 : Erection Charges In Percent (%) 0.00 0.00%
Schedule-4 : Training Charges Not Applicable In Percent (%) 0.00 0.00%
Schedule-7 : Type tests Charges Not Applicable In Percent (%) 0.00 0.00%
5 Multipackage discount applicable on this package (S3) only if other packages covered under the same bidding document is also awarded to us. Discount on lum-sum basis on total price quoted by us without Taxes & Duties. [This discount shall be proportionately applicable on all the items of all the Schdules i.e. Sch-1 (without type test charges), Sch-2, Sch-3 & Sch-7] IN Rs. 0.00%
6 Multipackage discount applicable on this package (S3) only if other packages covered under the same bidding document is also awarded to us. Discount on percent basis on total price quoted by us without Taxes & Duties. [This discount shall be proportionately applicable on all the items of all the Schdules i.e. Sch-1 (without type test charges), Sch-2, Sch-3 & Sch-7] In Percent (%) 0.00%
Schedule-4 : Training Charges In Percent (%) 0.00 0.00%
Please consider this letter of discount as the integral part of our price bid.
Thanking you, we remain,
Yours faithfully,
For and on behalf of aaa
Date : 2-Sep-2020 Printed Name : xxx
Place : Shillong Designation : yyyy
Details of Octroi
Sl No. Description of Items Amount on which Octroi is applicable Rate of Octroi Octroi
Details of Entry Tax
Sl No. Description of Items Amount on which Entry Tax is applicable Rate of Entry Tax Entry Tax
Details of Other Taxes & Duties
Sl No. Description of Items Amount on which Other Taxes & Duties are applicable Description of Taxes & Duties Rate of Taxes & Duties Amount of Taxes & Duties
Bid Form 2nd Envelope Micro and Small Enterprise (MSE) 1 st 1 January
0 2 nd 2 February
BID FORM (Second Envelope) 3 rd 3 March
Bid Proposal Ref. No. 5 th 5 May
Date : 2-Sep-2020 6 th 2 6 June
To: 8 th September 8 August
Chief General Manager (C&M) 9 th 2020 9 September
Power Grid Corporation of India Limited 10 th 10 October
North Eastern Region 11 th 11 November
Dongtieh, Lower Nongrah, Lapalang 12 th 12 December
Shillong – 793 006 (Meghalaya). 13 th
Name of Contract : Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS. 15 th
Dear Ladies and/or Gentlemen, 16 th
1.0 #REF! In continuation of First Envelope of our Bid, we hereby submit the Second Envelope of the Bid, both of which shall be read together and in conjunction with each other, and shall be construed as an integral part of our Bid. Accordingly, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial Operation, Performance & Guarantee Test as per provision of Technical Specification) under the above-named package in full conformity with the said Bidding Documents for the sum of Rs. Plus applicable Octroi, Entry Tax, Other Taxes & Duties or such other sums as may be determined in accordance with the terms and conditions of the Bidding Documents. #REF! #REF! 17 th
Schedule 1 Plant and Equipment (Including Mandatory Spare Parts) to be supplied, including Type Test Charges. 21 st
Schedule 2 Local Transportation, Insurance and other Incidental services. 22 th
Schedule 3 Installation Charges. Micro and Small Enterprise (MSE) 23 th
Schedule 4 Training charges for training to be imparted. 24 th
Schedule 5 Taxes and Duties not included in Schedule 1 25 th
Schedule 6 Grand Summary [Schedule 1to 5] 26 th
Schedule 7 Break-up of Type Test Charges for Type Tests to be conducted 27 th
2.5 We declare that items left blank in the Schedules will be deemed to have been included in other items. The TOTAL for each Schedule and the TOTAL of Grand Summary shall be deemed to be the total price for executing the Facilities and sections thereof in complete accordance with the Contract, whether or not each individual item has been priced. 31 st
3.0 We confirm that except as otherwise specifically provided our Bid Prices in this Second Envelope include all taxes, duties, levies and charges as may be assessed on us/our Associate (applicable for Foreign Bidder), our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.
3.3 We also understand that, in case of award on us, you shall pay directly, if so required /reimburse to us octroi/entry tax as applicable for destination site/state on all items of supply including bought-out finished items, which shall be dispatched directly from the sub-vendor’s works to the Employer’s site (sale-in-transit). Further, Service Tax, if applicable, for the services to be rendered by us, the same is included in our bid price in this Second Envelope.
3.4 We confirm that we shall also get registered with the concerned Sales Tax Authorities, in all the states where the project is located.
3.5 We confirm that no Sales Tax/VAT in any form shall be payable by you for the bought out items which shall be despatched directly by us under the First Contract to the project site. However, you will issue requisite Sales Tax declaration/Vatable forms in respect of such bought out items, on production of documentary evidence of registration with the concerned Sales Tax Authorities.
4.0 # (For Joint Venture only) We, the partners of Joint Venture submitting this bid, do agree and confirm that in case of Award of Contract on the Joint Venture, we shall be jointly and severally liable and responsible for the execution of the Contract in accordance with Contract terms and conditions.
5.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.
Dated this 2nd day of September 2020
Thanking you, we remain,
Yours faithfully,
For and on behalf of aaa
Date : 2-Sep-2020 Printed Name : xxx
Place : Shillong Designation : yyyy
In case of bid from a Joint Venture, name & designation of representative of JV partner is to be provided and Bid Form is also to be signed by him.
Please provide additional information of the Bidder
Business Address :
Country of Incorporation :
State/Province to be indicated :
Name of Principal Officer :
Address of Principal Officer : 0
Note: Bidders may note that no prescribed proforma has been enclosed for Attachment 2 : Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.
STATEMENT OF QUOTED / CORRECTED PRICES
All Figures are in Rupees
Sl. No. Price Component Quoted Price Corrected Price
1 TOTAL SCHEDULE NO. 1:Ex-Works Price of Plant and Equipment including Type Test Charges 26,032,640.41 26,032,640.41
2 TOTAL SCHEDULE NO.2: Local Transportation, Insurance and other Incidental Services. 1,392,703.24 1,392,703.24
3 TOTAL SCHEDULE NO.3: Installation Charges 0.00 0.00
4 TOTAL SCHEDULE NO.4: Training Charges Not Applicable Not Applicable
5 TOTAL BID PRICE: (Excluding Taxes & Duties) 27,425,343.65 27,425,343.65
6 DISCOUNT #REF! #REF! #REF!
7 NET BID PRICE (Excluding Taxes & Duties) #REF! #REF!
8 TAXES & DUTIES PAYABLE ADDITIONALLY
A) EXCISE DUTY #REF! #REF!
B) CENTRAL SALES TAX 0 0.00
C) VAT #REF! #REF!
D) ENTRY TAX / OCTROI 0 #REF!
F) TOTAL TAXES & DUTIES #REF! #REF!
8 TOTAL BID PRICE (INCLUDING TAXES & DUTIES) #REF! #REF!
9 TOTAL SCHEDULE NO.7: Type Test Charges [Total of this Schedule is included in Schedule-1 above] #REF! #REF!
I) Bidder has indicated the following taxes and duties additionally applicable for their bid:
#REF! Excise Duty #REF! #REF!
#REF! VAT #REF! #REF!
Entry Tax/ Octroi as Entry Tax/ Octroi
Others as Others
II) With regard to Entry Tax, it may be mentioned that the substations covered under the subject pacakge falls in State of MP, where an entry tax @ 2% of Purchase Price is applicable. In view of the above, the taxes and duties inter-alia including entry tax applicable for the bids are calculated :
a) Ex-Works Price of Direct Supplies (after discount, if any) Rs. #REF!
b) Excise Duty, as applicable on (a) above at the rate : 10.00% Rs. #REF!
c) Amount on which Sales Tax is applicable 0.00 0
d) CST, as applicable on (a) + ED (b) above at the rate : 2.00% Rs. 0
e) VAT, as applicable on (a) + ED (b) above at the rate : 1.00% #REF!
g) Purchase Price for Entry Tax (Total Ex-Works+F&I+ED+CST+Others) Rs. #REF!
h) Entry Tax, as applicable on (e) above at the rate : Rs. #REF!
Construction of B-Type Residential Quarters along with dismantling of existing A-Type Residential Quarters under ADDCAP 2019-24 at 220kv Salakati SS. Statement of Quoted / Corrected Prices Page
Excise Duty #REF! #REF!
Sl. No. Clause Ref. No. Description of Clause Observation/ Comment of the Bidder Remarks CST
1 Clause 10 Taxes and Duties, Section-IV, GCC 10. Taxes and Duties VAT #REF! #REF!
10.1 The Supplier shall be entirely responsible for payment of all taxes, duties, licence fees ………………………. #REF! Entry Tax/ Octroi
10.2 The Supplier shall be solely responsible for the taxes that may be levied on the Supplier's persons ……………………….. CST % as Others
10.3 In respect of direct transaction between the Purchaser and the Supplier, the EXW price is inclusive………………………….. #REF!
10.4 Octroi/entry tax as applicable for destination site/state on all items of supply including bought-out finished items, which shall be dispatched directly from the …………………………………… Entry Tax/ Octroi as
10.5 Purchaser would not bear any liability on account of Service Tax. ………………. Others as
10.6 Sales Tax/VAT on Works Contract, Turnover Tax or any other similar taxes under the …………………………………..
10.7 For the purpose of the Contract, it is agreed that the Contract Price specified in Article 2(Contract Price and Terms of Payment) of the Contract Agreement is based on the taxes, duties, levies and charges prevailing at the date seven (07) days prior to the last date of bid submission (hereinafter called “Tax” in this GCC Sub-clause 10.7). .……………........................................
In respect of raw materials, intermediary components etc and bought out items, neither the Purchaser nor the Supplier shall be entitled to any claim arising due to increase or decrease in the rate of Tax, ……………………………………………....
2 Clause 29 Change in Laws and Regulations, Section-IV, GCC 29.1 If, after the date seven (07) days prior to the date of Bid Opening, any law, regulation, ordinance, order or by-law having the force of law is enacted, promulgated, abrogated or changed in India (which shall be deemed to include any change in interpretation or application by the competent authorities) ……………………………………….
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
#REF! #REF! #REF!
23 Twenty Three
27 Twenty Seven
28 Twenty Eight
33 Thirty Three
37 Thirty Seven
38 Thirty Eight
73 Seventy Three
74 Seventy Four
75 Seventy Five
77 Seventy Seven
78 Seventy Eight
79 Seventy Nine
83 Eighty Three
87 Eighty Seven
88 Eighty Eight
93 Ninety Three
97 Ninety Seven
98 Ninety Eight
100 One Hundred
Bill of Quantity and Schedule of Prices
SL. No. DSR (E&M0 2018 Item No. Description of Items Unit Qty Rate (Rs) Amount Amount (Exclusive of [email protected]%)
SUB HEAD -I: WIRING
1 1.10.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Group C) Point 82 990 81180 90298.25
2 1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Point 4 1057 4228 4702.90
3 1.12 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. Meter 219 200 43800 48719.68
4 1.57 Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. Each 9 639 5751 6396.96
5 SUB HEAD -II: TELEPHONE AND TV
6 1.18 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
8 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. Meter 138 33 4554 5065.51
9 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
11 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
12 1.24.6 Telephone socket outlet Each 9 119 1071 1191.30
13 1.24.7 TV antenna socket outlet Each 9 119 1071 1191.30
14 SUB HEAD -III: SUB MAIN
15 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
16 1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Meter 351 229 80379 89407.28
17 1.7.5 2 X 10 sq. mm + 1 X 6 sq. mm earth wire Meter 60 426 25560 28430.94
18 SUB HEAD -IV: FIXTURES
19 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. Each 15 495 7425 8258.99
20 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. Each 24 401 9624 10704.98
21 1.56 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Each 9 582 5238 5826.34
22 1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
28 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
30 1.24.4 3 pin 5/6 A socket outlet Each 12 111 1332 1481.61
31 1.25 Supplying and fixing two module stepped type electronic fanregulator on the existing modular plate switch box includingconnections but excluding modular plate etc. as required. Each 12 342 4104 4564.97
32 1.26 Supplying and fixing modular blanking plate on the existingmodular plate & switch box excluding modular plate asrequired. Each 13 32 416 462.73
33 1.33 Supplying and fixing 3 pin, 5 A ceiling rose on the existingjunction box/ wooden block including connections etc. as required. Each 41 65 2665 2964.34
34 1.58 Supplying and fixing PVC batten/ angle holder including connections etc. as required. Each 23 90 2070 2302.51
35 SUB HEAD -IV: INSTALATION, TESTING & COMMISSIONING
36 1.35 Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. Each 25 98 2450 2725.19
37 1.41 Installation, testing and commissioning of pre-wired,fluorescent fitting / compact fluorescent fitting of all types,complete with all accessories and tube/lamp etc. directly onceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. Each 14 168 2352 2616.18
38 1.44 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. Each 12 171 2052 2282.48
39 1.50.1 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required (Upto 450 mm sweep) Each 9 363 3267 3633.95
40 SUB HEAD -V: MCB'S AND MAIN DISTRIBUTION BOARDS
41 2.3 Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
42 2.3.4 16 way, Double door Each 3 2453 7359 8185.57
43 2.1 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
44 2.10.1 Single pole 6 Amp Each 12 199 2388 2656.22
45 2.10.1 Single pole 16 Amp Each 15 199 2985 3320.28
46 2.14 Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
48 NS Fabrication, supply, erection and commissioning of distribution panel duly painted with apprved shade (approx. dimensions: 1250 mm wide x 1000 mm ht x 250 mm deep) fabricated out of 2 mm thick CRCA sheet with cover, hinges on one side, locking arrangement on the other side with following MCBs energy meters etc alongwith 0-500 voltmeter(96x96 mm), indicating lamps, toggle swith, slide lock fuse etc including interconnections as required. (1) Incoming 100 A - 4 pole RCCB with 300 mA current sensitivity - 1 no (2) DP 32 A MCB - 7 nos (3) 10-40 A, 1 - ph static Energy Meter - 5 nos (4) 4 strips 100 A tinned Copper Bus bar(50mm x 5mm x 500 mm) - I Set Each 1 35000 35000 35000.00
49 2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. Each 15 8 120 133.48
50 SUB HEAD -V: EARTHING AND LIGHTNING PROTECTION
51 5.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm diaincluding accessories, and providing masonry enclosure withcover plate having locking arrangement and watering pipe etc.with charcoal/ coke and salt as required. Each 4 5308 21232 23616.81
52 5.12 Providing and laying earth connection from earth electrodewith 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earthelectrode including connection with G.I. thimble excavation and re-filling as required. Meter 15 188 2820 3136.75
53 6.2 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. Each 1 448 448 498.32
54 6.4 Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. Each 15 93 1395 1551.69
55 6.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) Meter 15 104 1560 1735.22
56 6.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) Meter 15 163 2445 2719.63
TOTAL SERVICE AMOUNT EXCLUSIVE OF GST RS. 449393
1 HEAD -2: Supply Unit Qty Rate exclusive of GST Amount Exclusive of GST
2 NS Ceiling Fan (1200 mm sweep, Double bearing) Nos 12 1400 16800.00
3 NS Exhaust fan (450 mm sweep for kitchen) Nos 3 4100 12300.00
4 NS Exhaust Fans 250 mm sweep for toilet (with louver having bird screen) Nos 6 1400 8400.00
5 NS 20 W LED Tube Light set Nos 14 350 4900.00
6 NS Bracket Light Nos 18 400 7200.00
7 NS Spot light/ Down light (9W LED Light) Nos 23 150 3450.00
8 NS Bulk Head Light Nos 4 300 1200.00
9 NS Modular Indicator for switchboard Nos 12 150 1800.00
10 NS Chandilier Nos 3 2500 7500.00
11 NS Bell Nos 3 190 570.00
12 NS Krone type Distribution Board 20 pair Nos 1 1000 1000.00
TOTAL SUPPLY AMOUNT EXCLUSIVE OF GST RS. 65120
TOTAL ESTIMATE OF B-1 TYPE BLOCK (03 QUARTER) (Exclusive of GST) Rs. 514513
Deputy Manager (SS-AM)
Bill of Quantity and Schedule of Prices
SL. No. DSR (E&M0 2018 Item No. Description of Items Unit Qty Rate (Rs) Amount Amount (Exclusive of [email protected]%)
SUB HEAD -I: WIRING
1 1.10.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Group C) Point 64 990 63360 70476.69
2 1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Point 4 1057 4228 4702.90
3 1.12 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. Meter 146 200 29200 32479.79
4 1.57 Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. Each 6 639 3834 4264.64
5 SUB HEAD -II: TELEPHONE AND TV
6 1.18 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
8 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. Meter 102 33 3366 3744.07
9 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
11 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
12 1.24.6 Telephone socket outlet Each 8 119 952 1058.93
13 1.24.7 TV antenna socket outlet Each 8 119 952 1058.93
14 SUB HEAD -III: SUB MAIN
15 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
16 1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Meter 264 229 60456 67246.50
17 1.7.5 2 X 10 sq. mm + 1 X 6 sq. mm earth wire Meter 40 426 17040 18953.96
18 SUB HEAD -IV: FIXTURES
19 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. Each 10 495 4950 5505.99
20 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. Each 18 401 7218 8028.74
21 1.56 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Each 6 582 3492 3884.23
22 1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
1.27.4 6 Module (200mmX75mm) Each 2 333 666 740.81
27 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
29 1.24.4 3 pin 5/6 A socket outlet Each 12 111 1332 1481.61
30 1.25 Supplying and fixing two module stepped type electronic fanregulator on the existing modular plate switch box includingconnections but excluding modular plate etc. as required. Each 10 342 3420 3804.14
31 1.26 Supplying and fixing modular blanking plate on the existingmodular plate & switch box excluding modular plate asrequired. Each 10 32 320 355.94
32 1.33 Supplying and fixing 3 pin, 5 A ceiling rose on the existingjunction box/ wooden block including connections etc. as required. Each 32 65 2080 2313.63
33 1.58 Supplying and fixing PVC batten/ angle holder including connections etc. as required. Each 17 90 1530 1701.85
34 SUB HEAD -IV: INSTALATION, TESTING & COMMISSIONING
35 1.35 Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. Each 20 98 1960 2180.15
36 1.41 Installation, testing and commissioning of pre-wired,fluorescent fitting / compact fluorescent fitting of all types,complete with all accessories and tube/lamp etc. directly onceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. Each 12 168 2016 2242.44
37 1.44 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. Each 10 171 1710 1902.07
38 1.50.1 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required (Upto 450 mm sweep) Each 6 363 2178 2422.64
39 SUB HEAD -V: MCB'S AND MAIN DISTRIBUTION BOARDS
40 2.3 Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
41 2.3.4 16 way, Double door Each 2 2453 4906 5457.05
42 2.1 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
43 2.10.1 Single pole 6 Amp Each 10 199 1990 2213.52
44 2.10.1 Single pole 16 Amp Each 10 199 1990 2213.52
45 2.14 Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
47 NS Fabrication, supply, erection and commissioning of distribution panel duly painted with apprved shade (approx. dimensions: 1250 mm wide x 1000 mm ht x 250 mm deep) fabricated out of 2 mm thick CRCA sheet with cover, hinges on one side, locking arrangement on the other side with following MCBs energy meters etc alongwith 0-500 voltmeter(96x96 mm), indicating lamps, toggle swith, slide lock fuse etc including interconnections as required. (1) Incoming 100 A - 4 pole RCCB with 300 mA current sensitivity - 1 no (2) DP 32 A MCB - 7 nos (3) 10-40 A, 1 - ph static Energy Meter - 5 nos (4) 4 strips 100 A tinned Copper Bus bar(50mm x 5mm x 500 mm) - I Set Each 1 35000 35000 35000.00
48 2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. Each 8 8 64 71.19
49 SUB HEAD -V: EARTHING AND LIGHTNING PROTECTION
50 5.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm diaincluding accessories, and providing masonry enclosure withcover plate having locking arrangement and watering pipe etc.with charcoal/ coke and salt as required. Each 4 5308 21232 23616.81
51 5.12 Providing and laying earth connection from earth electrodewith 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earthelectrode including connection with G.I. thimble excavation and re-filling as required. Meter 15 188 2820 3136.75
52 6.2 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. Each 1 448 448 498.32
53 6.4 Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. Each 10 93 930 1034.46
54 6.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) Meter 10 104 1040 1156.81
55 6.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) Meter 10 163 1630 1813.08
TOTAL SERVICE AMOUNT EXCLUSIVE OF GST RS. 345575.72
HEAD -2: Supply Unit Qty Rate exclusive of GST Amount Exclusive of GST
1 NS Ceiling Fan (1200 mm sweep) Nos 10 1400 14000.00
2 NS Exhaust fan (450 mm sweep for kitchen) Nos 2 4100 8200.00
3 NS Exhaust Fans 250 mm sweep for toilet (with louver having bird screen) Nos 4 1400 5600.00
4 NS 20 W LED Tube Light Nos 12 350 4200.00
5 NS Bracket Light Nos 14 400 5600.00
6 NS Spot light/ Down light (9W LED Light) Nos 18 150 2700.00
7 NS Bulk Head Light Nos 2 300 600.00
8 NS Modular Indicator for switchboard Nos 10 150 1500.00
9 NS Chandilier Nos 2 2500 5000.00
10 NS Bell Nos 2 190 380.00
11 NS Krone type Distribution Board 20 pair Nos 1 1000 1000.00
TOTAL SUPPLY AMOUNT EXCLUSIVE OF GST RS. 48780.00
TOTAL ELECTRICAL ESTIMATE FOR TYPE B-2 (BLOCK OF 2 QUARTERS) RS. 394356
Deputy Manager (SS-AM)
Bill of Quantity and Schedule of Prices
SL. No. DSR (E&M0 2018 Item No. Description of Items Unit Qty Rate (Rs) Amount Amount (Exclusive of GST)
SUB HEAD -I: WIRING
1 1.10.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Group C) Point 94 990 93060 103512.63
2 1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Point 5 1057 5285 5878.62
3 1.12 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. Meter 243 200 48600 54058.82
4 1.57 Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. Each 9 639 5751 6396.96
5 SUB HEAD -II: TELEPHONE AND TV
6 1.18 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
8 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. Meter 171 33 5643 6276.83
9 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
11 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
12 1.24.6 Telephone socket outlet Each 12 119 1428 1588.40
13 1.24.7 TV antenna socket outlet Each 12 119 1428 1588.40
14 SUB HEAD -III: SUB MAIN
15 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
17 1.7.5 2 X 10 sq. mm + 1 X 6 sq. mm earth wire Meter 60 426 25560 28430.94
18 SUB HEAD -IV: FIXTURES
19 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. Each 15 495 7425 8258.99
20 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. Each 27 401 10827 12043.10
21 1.56 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Each 9 582 5238 5826.34
22 1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
29 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
31 1.24.4 3 pin 5/6 A socket outlet Each 18 111 1998 2222.42
32 1.25 Supplying and fixing two module stepped type electronic fanregulator on the existing modular plate switch box includingconnections but excluding modular plate etc. as required. Each 15 342 5130 5706.21
33 1.26 Supplying and fixing modular blanking plate on the existingmodular plate & switch box excluding modular plate asrequired. Each 18 32 576 640.70
34 1.33 Supplying and fixing 3 pin, 5 A ceiling rose on the existingjunction box/ wooden block including connections etc. as required. Each 47 65 3055 3398.14
35 1.58 Supplying and fixing PVC batten/ angle holder including connections etc. as required. Each 26 90 2340 2602.83
36 SUB HEAD -IV: INSTALATION, TESTING & COMMISSIONING
37 1.35 Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. Each 29 98 2842 3161.22
38 1.41 Installation, testing and commissioning of pre-wired,fluorescent fitting / compact fluorescent fitting of all types,complete with all accessories and tube/lamp etc. directly onceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. Each 17 168 2856 3176.79
39 1.44 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. Each 15 171 2565 2853.10
40 1.50.1 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required (Upto 450 mm sweep) Each 9 363 3267 3633.95
41 SUB HEAD -V: MCB'S AND MAIN DISTRIBUTION BOARDS
42 2.3 Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
43 2.3.4 16 way, Double door Each 3 2453 7359 8185.57
44 2.1 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
45 2.10.1 Single pole 6 Amp Each 15 199 2985 3320.28
46 2.10.1 Single pole 16 Amp Each 15 199 2985 3320.28
47 2.14 Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
49 NS Fabrication, supply, erection and commissioning of distribution panel duly painted with apprved shade (approx. dimensions: 1250 mm wide x 1000 mm ht x 250 mm deep) fabricated out of 2 mm thick CRCA sheet with cover, hinges on one side, locking arrangement on the other side with following MCBs energy meters etc alongwith 0-500 voltmeter(96x96 mm), indicating lamps, toggle swith, slide lock fuse etc including interconnections as required. (1) Incoming 100 A - 4 pole RCCB with 300 mA current sensitivity - 1 no (2) DP 32 A MCB - 7 nos (3) 10-40 A, 1 - ph static Energy Meter - 5 nos (4) 4 strips 100 A tinned Copper Bus bar(50mm x 5mm x 500 mm) - I Set Each 1 35000 35000 35000.00
50 2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. Each 12 8 96 106.78
51 SUB HEAD -V: EARTHING AND LIGHTNING PROTECTION
52 5.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm diaincluding accessories, and providing masonry enclosure withcover plate having locking arrangement and watering pipe etc.with charcoal/ coke and salt as required. Each 4 5308 21232 23616.81
53 5.12 Providing and laying earth connection from earth electrodewith 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earthelectrode including connection with G.I. thimble excavation and re-filling as required. Meter 20 188 3760 4182.33
54 6.2 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. Each 1 448 448 498.32
55 6.4 Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. Each 15 93 1395 1551.69
56 6.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) Meter 15 104 1560 1735.22
57 6.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) Meter 15 163 2445 2719.63
TOTAL SERVICE AMOUNT EXCLUSIVE OF GST RS. 494220.79
HEAD -2: Supply Unit Qty Rate exclusive of GST Amount Exclusive of GST
1 NS Ceiling Fan (1200 mm sweep) Nos 15 1400 21000.00
2 NS Exhaust fan (450 mm sweep for kitchen) Nos 3 4100 12300.00
3 NS Exhaust Fans 250 mm sweep for toilet (with louver having bird screen) Nos 6 1400 8400.00
4 NS 20 W LED Tube Light Nos 17 350 5950.00
5 NS Bracket Light Nos 21 400 8400.00
6 NS Spot light/ Down light (9W LED Light) Nos 26 150 3900.00
7 NS Bulk Head Light Nos 5 300 1500.00
8 NS Modular Indicator for switchboard Nos 15 150 2250.00
9 NS Chandilier Nos 3 2500 7500.00
10 NS Bell Nos 3 190 570.00
11 NS Krone type Ditribution Board 20 pair Nos 1 1000 1000.00
TOTAL SUPPLY AMOUNT EXCLUSIVE OF GST RS. 72770.00
TOTAL ELECTRICAL ESTIMATE FOR TYPE B-3 (BLOCK OF 3 QUARTERS) RS. 566991
Deputy Manager (SS-AM)
Calculation sheet
Name of the work: Construction of 3 Nos. B1-Type building, 02 Nos B-2-Type building, 03 Nos B3-Type Building and dismantling of existing 08 Nos A-type building at 220/132 kV Salakati Sub-station under ADD CAP 2019-24.
1 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
2.8.1 All kinds of soil.
SN Location Unit Nos. of Bldg. Nos. Length Breadth Height Qty
2/2.26 Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
2.26.1 All kinds of soil.
3/2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
SN Location Unit Nos. of Bldg. Nos. Length Breadth Height Qty
Toal Excavation Cum 1 1 391.75 1.000 1.000 391.75
Less RCC Below Plinth Cum 1 1 36.345 1.000 1.000 36.34
4/4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :
4.1.9 1:4:8 (1 cement : 1fine sand : 8 graded stone aggregate 40 mm nominal size)
SN Location Unit Nos. of Bldg. Nos. Length Breadth Height Qty
5.33 DESIGN MIX CONCRETE Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately).
5/5.33.1 All works upto plinth level
SN Location Unit Nos. of Bldg. Nos. Length Breadth Height Qty
Total RCC (1:1:2) quantity up to Plinth level cum 49.76
6/5.33.2 All works above plinth level upto floor V level
Lintels GF DW1 Cum 1 12 2.600 0.230 0.180 1.29
Stairs waist slab Cum 1 2 2.950 1.100 0.150 0.97
Sunshade terrace Cum 1 1 1.500 0.600 0.150 0.14
7/5.22 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.
SN Location Unit Nos of bldg. Nos. No. of bar length Unit Wt. Qty
Considering @100kG per Cum of RCC.upto plinth Kg 1 155.93 100 15592.60
8/6.1 B R I C K W O R K
Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in:
6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand)
SN Location Unit Nos of bldg. Nos. Length Breadth Height Qty
9/6.4 Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :
6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 2357.4
SN Location Unit Nos of bldg. Nos. Length Breadth Height Qty
10/6.13 Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level.
6.13.2 Cement mortar 1:1(1 cement :1coarse sand) sqm 302.8
SN Location Unit Nos of bldg. Nos. Length Breadth Height Qty
LESS OPENNING Sqm 1 -1 1.135 - 2.000 -2.27
LESS OPENNING Sqm 1 -1 1.135 - 2.000 -2.27
LESS OPENNING Sqm 1 -1 1.500 - 2.000 -3.00
LESS OPENNING Sqm 1 -1 1.135 - 2.000 -2.27
LESS OPENNING Sqm 1 -1 1.135 - 2.000 -2.27
LESS OPENNING Sqm 1 -1 1.500 - 2.000 -3.00
11/6.15 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
SN Location Unit Nos of bldg. Nos. Length Breadth Height Qty
LESS OPENNING Sqm 1 -1 1.135 - 2.000 -2.27
LESS OPENNING Sqm 1 -1 1.135 - 2.000 -2.27
LESS OPENNING Sqm 1 -1 1.500 - 2.000 -3.00
LESS OPENNING Sqm 1 -1 1.135 - 2.000 -2.27
LESS OPENNING Sqm 1 -1 1.135 - 2.000 -2.27
LESS OPENNING Sqm 1 -1 1.500 - 2.000 -3.00
12/13.1 12 mm cement plaster of mix :
13.1.2 1:6 (1 cement : 6 fine sand) sqm 67.65
SN Location Unit Nos of bldg. Nos. Length Breadth Height Qty
Mumty slab Sqm 1 2 4.530 - 3.325 30.12
LESS OPENNING Sqm 1 -1 1.135 - 2.000 -2.27
LESS OPENNING Sqm 1 -1 1.135 - 2.000 -2.27
LESS OPENNING Sqm 1 -1 1.500 - 2.000 -3.00
LESS OPENNING Sqm 1 -1 1.135 - 2.000 -2.27
LESS OPENNING Sqm 1 -1 1.135 - 2.000 -2.27
LESS OPENNING Sqm 1 -1 1.500 - 2.000 -3.00
13/13.2 15 mm cement plaster on the rough side of single or half brick wall of mix :
13.2.2 1:6 (1 cement : 6 fine sand) sqm 78.55
SN Location Unit Nos of bldg. Nos. Length Breadth Height Qty
Mumty slab Sqm 1 2 4.530 - 3.325 30.12
LESS OPENNING Sqm 1 -1 1.135 - 2.000 -2.27
LESS OPENNING Sqm 1 -1 1.135 - 2.000 -2.27
LESS OPENNING Sqm 1 -1 1.500 - 2.000 -3.00
LESS OPENNING Sqm 1 -1 1.135 - 2.000 -2.27
LESS OPENNING Sqm 1 -1 1.135 - 2.000 -2.27
LESS OPENNING Sqm 1 -1 1.500 - 2.000 -3.00
14/2.27 Supplying and filling in plinth with Jamuna sand under floors including, watering, ramming consolidating and dressing complete.
SN Location Unit Nos of bldg. Nos. Length Breadth Height Qty
15/11.36 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
SN Location Unit Nos of bldg. Nos. Length Breadth Height Qty
16 11.37 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:1(1 Cement : 1Coarse sand), including pointing the joints with white cement and matching pigment etc, complete.
SN Location Unit Nos of bldg. Nos. Length Breadth Height Qty
17 VITRIFIED FLOOR TILE 14.1 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
14.41.2 Size of Tile 600x600 mm
SN Location Unit Nos of bldg. Nos. Length Breadth Height Qty
Living room Sqm 1 4 4.500 3.200 - 57.60
18 Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:1(1 cement : 1coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :
11.23.5 Udaipur green marble
SN Location Unit Nos of bldg. Nos. Length Breadth Height Qty
19/11.24 Extra for pre finished nosing to treads of steps of marble stone. Metre 1 35 1.100 38.50
20/17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Each 1 8 8
8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
8.2.2 Granite of any colour and shade
21/8.2.2.2 Area of slab over 0.50 sqm sqm
Along L sqm 1 4 2.6 0.6 6.24
Along B sqm 1 4 1.6 0.6 3.84
8.3 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
22/8.3.2 Granite work Metre 1 4 4.2 16.8
23/22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm) sqm
Flooring (Both floors)
Kitchen floor sqm 1 4 2.6 3.3 34.32
Kitchen walls above platform (Along L) sqm 1 4 2.6 0.6 6.24
Kitchen walls above platform (Along B) sqm 1 4 1.6 0.6 3.84
Toilet-1 (2.2mx1.5m) floor sqm 1 8 2.2 1.5 26.40
Toilet-2 (1.5mx2.15m) floor sqm 1 8 1.5 2.15 25.80
Walls (up to 2.1 m)
12.21 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design
24/12.21.1 In 75x75 mm deep chase Metre
Left side (In two rows) Metre 1 1 4.9 4.9
Right side (In two rows) Metre 1 1 2.86 2.86
25/12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. each 1 2 6
26/18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. each 1 8 8.00
27/22.7 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following perations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment etc.. All above operations to be done in order and as directed and specified by the Engineerin-Charge :
22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
SN Location Unit Nos of bldg. Nos. Length Breadth Height Qty
28/10.17 Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. each 75.2
SN Location Unit Nos of bldg. Nos. Length Breadth Height Qty
Fans Each 1 20 - - - 20.00
29 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer.
SN Location Unit Nos of bldg. Nos. Length Unit Wt Height Qty
Balluster (20dia) Kg 1 26 0.710 1.58 - 29.17
Railing Terrace (50mm) Kg 1 4 3.5 5.1 - 71.40
Providing and fixing soil waste and vent pipes
Sand cast iron S&S pipe as per IS:1729
Location Unit Nos of bldg. Nos Length Breadth Height Quantity
Toilets Metre 1 4 10.800 - - 43.20
Kitchen Metre 1 2 10.300 - - 20.60
Sand cast iron S&S pipe as per IS:1729
Location Unit Nos of bldg. Nos Length Breadth Height Quantity
Vent pipe Metre 1 4 6.00 24.00
32 Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 (1cement:2fine sand) in SCI/ CI
Location Unit Nos of bldg. Nos Length Breadth Height Quantity
Waste pipe each 1 4 4.00
33 Providing lead caulked joint to SCI/ centrifugally cast (Spun) iron pipes and fittings of diametre.
Location Unit Nos of bldg. Nos Length Breadth Height Quantity
soil pipe each 1 12 12.00
34 Providing and fixing MS holder bat clamps of approved design to SCI/ CI (Spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:1mix including cost cutting holes and making good the walls.
For 75mm dia pipe
Location Unit Nos of bldg. Nos Length Breadth Height Quantity
Vent pipe each 1 8 8.00
35 Providing and fixing plain bend of required degree.
Sand cast iron S&S pipe as per IS:1729
Location Unit Nos of bldg. Nos Length Breadth Height Quantity
soil pipe each 1 8 8.00
36 Providing and fixing square- mouth S.W. gully trap grade A complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300mm size ( inside) the weight of cover to be not less than 4.50kg and frame to be not less than 2.70 kg as per standard design
. 100x100mm size P type with FPS brick class designation 75
Sl.No Location Unit Nos of bldg. Nos Length Breadth Height Quantity
external each 1 6 - - - 6.00
37 Providing and fixing wash basin with C.I brackets 15 mm C.P. brass pillar taps 32 mm C.P. brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever require .
17.7.1White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap
Sl.No Location Unit Nos of bldg. Nos Length Breadth unit wt. Quantity
Washing each 1 8 - - - 8.00
38 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
17.2.1 W.C. pan with ISI marked white solid plastic seat and lid
Sl.No Location Unit Nos of bldg. Nos Length Breadth unit wt. Quantity
Toilets each 1 8 - - - 8.00
39 Providing and fixing Stainless Steel A ISI 301(18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
17.10.1 Kitchen sink with drain board
17.10.1.1 510x1040 mm bowl depth 250 mm
Location Unit Nos of bldg. Nos Length Breadth Height Quantity
washing Each 1 4 - - - 4.00
40/17.70 Providing and fixing PTMT Bottle Trap for Wash basin and sink Total 4.00
41/17.70.2 Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gm each 1 8 8.00
42 Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fitting complete
17.28.1 semi regid pipe
Location Unit Nos of bldg. Nos Length Breadth Height Quantity
washing Each 1 4 - - - 4.00
43 Providing and fixing 100mm SCI iron grating for gully trap.
Location Unit Nos of bldg. Nos Length Breadth Height Quantity
external Each 1 8 - - - 8.00
44 Providing and fixing mirror of superior glass (pf approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing
17.32.2 Rectangular Shape 453x357mm
Location Unit Nos of bldg. Nos Length Breadth Height Quantity
Dinning Each 1 8 - - - 8.00
45 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
17.73.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
Location Unit Nos of bldg. Nos Length Breadth Height Quantity
Dinning Each 1 8 - - - 8.00
Conceal pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall.
46 18.11.1 15mm dia nominal bore
Location Unit Nos of bldg. Nos Length Breadth Height Quantity
Bathroom Mtr 3 4 1.500 - - 18.00
47 18.11.2 20mm dia nominal bore
Location Unit Nos of bldg. Nos Length Breadth Height Quantity
Bathroom Mtr 1 4 3.000 - - 12.00
48 Providing and fixing brass bib cock of approved quality
Location Unit Nos of bldg. Nos Length Breadth Height Quantity
Bathroom Each 1 8 - - - 8.00
Kitchen Each 1 4 - - - 4.00
49 Providing and fixing stop cock of approved quality
Location Unit Nos of bldg. Nos Length Breadth Height Quantity
Sub line Each 1 5 - - - 5.00
50 Providing and fixing CP brass shower rose with 15 to 20mm inlet
Location Unit Nos of bldg. Nos Length Breadth Height Quantity
Bathroom Each 1 8 - - - 8.00
51 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
With F.P.S. bricks
Location Unit Nos of bldg. Nos Length Breadth Coeff Quantity
Near septic tank Each 1 1 - - - 1.00
52 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
SN Location Unit Nos of bldg. No Cap. Breadth Height Qty.
18.75 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.
53/18.75.1 15 mm nominal bore, weighing not less than 32 gms each 1 4 12.00
54/13.47 EXTERIOR FINISHING Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:
13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Location Unit Nos of bldg. Nos Length Breadth Height Quantity
Left/ Right Sqm 1 2 4.76 - 7.80 74.26
55 Distempering with oil bound washable distemper of approved brand and manufacture to give and evenshade .
13.41.1 (New work (two or more coats) over and including priming coat with cement primer.
Location Unit Nos of bldg. Nos Length Breadth Height Quantity
Living room Sqm 1 8 4.500 - 3.00 108.00
Less opening Sqm 1 -2 1.135 - 2.10 -4.77
56 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
Location Unit Nos of bldg. Nos Length Breadth height Quantity
All round of building Sqm 1 3 76.11 0.75 - 171.25
57 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:
13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
Location Unit Nos of bldg. Nos Length Breadth Factor Quantity
58 Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes
12.41.2 110 mm diameter
Location Unit Nos of bldg. Nos Length Breadth Factor Quantity
Rain Water Mtr 1 5 7.500 - - 37.50
Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
59 12.42.1Coupler
Location Unit Nos of bldg. Nos Length Breadth Factor Quantity
Rain Water Each 1 5 - - - 5.00
Location Unit Nos of bldg. Nos Length Breadth Factor Quantity
Rain Water Each 1 10 - - - 10.00
61 Providing and fixing Unplasticised -PVC pipe clips of approved design to Unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:1(1 cement : 1coarse sand) and making good the wall etc. complete.
Location Unit Nos of bldg. Nos Length Breadth Factor Quantity
Rain Water Each 1 70 - - - 70.00
62 Constructing brick masonry manhole in cement mortar 1:1( 1 cement : 1coarse sand ) R.C.C. top slab with 1:2:1mix (1 cement : 2 coarse sand : 1graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 1coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:1(1 cement : 2 coarse sand : 1graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design :
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
19.7.1.1 With F.P.S. bricks with class designation 75
Location Unit Nos of bldg. Nos Length Breadth Factor Quantity
Waste Line Each 1 1 - - - 1.00
63 Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.1mm in both directions with wire of dia 0.63 mm as per IS :1568, for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, as per directions of Engineer-in-charge: (Note:- Butt hinges and necessary screws shall be paid separately)
9.31.1 35 mm thick shutters
Location Unit Nos of bldg. Nos Length Breadth thickness Quantity
D5 (Terrace door) sqm 1 1 2 0.9 - 1.80
Door Portion sqm 1 12 2.55 0.9 - 27.54
Window portion sqm 1 12 1.65 1.65 - 32.67
64/NS-1 Supplying and installing uPVC sliding windows made out of lead free, UV resistant green profile of BIS standard uPVC multichambered sections with corners fusion welded, fully reinforced with Galvanized steel atleat 1.5/2mm thick including interlock profile, glaxzing bead, grooving bead, brush seal, aluminium sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop-up handle, keeper, drain cap, fisher screws, packing pieces with all necessary SS screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside/outside of dowcorning/GE or equivalent complete as directed. with 5mm clear glass.(b) 2 track sliding window/openable without flyscreen using uPVC section of minimum sizes 58mm X 53mm X 2.4mm thick wall for frame, 37mm X 61mm X 2.4mm thick wall for glass sash & interlock: 43mm X 23mm (glass panel). Make: Sintex, Fenesta , Ozone ) (i) 2-3 panel with 5mm clear float glass Item has been considered from ongoing work LOA No-NESH/CSM/2936/LOA/32 dtd. 28.07.15 Sl No 163-NS30A.
65/NS-2 Supplying and installing uPVC sliding windows made out of lead free, UV resistant green profile of BIS standard uPVC multi chambered sections with corners fusion welded, fully reinforced with Galvanized steel atleast 1.5/2mm thick including interlock profile, glazing bead, grooving bead, brush seal, aluminum sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop-up handle, keeper, drain cap, fisher screws, packing pieces with all necessary SS screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside/outside of dowcorning/GE or equivalent complete as directed. with 5mm clear glass.(b) 2 track sliding window/openable without fly screen using uPVC section of minimum sizes 58mm X 53mm X 2.4mm thick wall for frame, 37mm X 61mm X 2.4mm thick wall for glass sash & interlock: 43mm X 23mm (glass panel). Make: Sintex, Fenesta , Ozone )(ii) 4-panel or more with 5mm clear float glass Item has been considered from ongoing work LOA No-NESH/CSM/2936/LOA/32 dtd. 28.07.15 Sl No 163-NS30B.
DW1 (Glass portion) sqm 1 8 1.65 1.2 15.84
66 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
Location Unit Nos of bldg. Nos Length Breadth thickness Quantity
50x5 mm MS plate embedded on RCC pardi @ 0.0981 kg/m2 kg 1 1 20 0.0981 1.96
40x6 mm MS Flats @ 1.88 kg/m kg 1 1 2 1.88 3.76
Hold fast 20x5 MS 100mm long @ 0.8 kg/m kg 1 1 40 0.8 32.00
Balcony Railings 1 1 0.00
MS Hollow sections 49.5x49.5x3.6 @ 4.98 kg/m kg 1 1 29.1 4.98 144.92
MS Hollow sections 25x25x3.2 @ 1.98 kg/m kg 1 1 45.9 1.98 90.88
MS Hollow sections 25x25x3.2 @ 1.98 kg/m-Horizontal portion kg 1 1 43.2 1.98 85.54
Angular portion (1) -MS Hollow sections 25x25x3.2 @ 1.98 kg/m Length = sqrt ((0.45*0.45)+(0.45+0.45)) = 0.61m kg 1 1 30.72 1.98 60.83
Angular portion (2) -MS Hollow sections 25x25x3.2 @ 1.98 kg/m Length = sqrt ((0.225*0.225)+(0.225+0.225)) = 0.32 m kg 1 1 30.72 1.98 60.83
Doors & Windows 1 1 0.00
MS Flats 25x5 mm @ 1kg/m kg 1 1 73.2 1.00 73.20
MS Flats 25x5 mm @ 1kg/m kg 1 1 28.8 1.00 28.80
MS Flats 25x5 mm @ 1kg/m kg 1 1 45.6 1.00 45.60
MS Flats 25x5 mm @ 1kg/m kg 1 1 25.2 1.00 25.20
MS Flats 25x5 mm @ 1kg/m kg 1 1 22.8 1.00 22.80
67 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
9.48.1Fixed to steel windows by welding
Location Unit Nos of bldg. Nos Length Ut. Wt thickness Quantity
Vertical portion-12mm square bar @ 1.1 kg/m as per Indian steel table kg 1 1 88.8 1.1 97.68
Horizontal portion-12mm square bar @ 1.1 kg/m as per Indian steel table kg 1 1 19.8 1.1 21.78
Inclined portion @125 mm c/c = (1850-125-125)/125= 13Nos. 12mm square bar @ 1.1 kg/m as per Indian steel table kg 1 1 128.7 1.1 141.57
Vertical portion-12mm square bar @ 1.1 kg/m as per Indian steel table kg 1 1 16.8 1.1 18.48
Horizontal portion-12mm square bar @ 1.1 kg/m as per Indian steel table kg 1 1 4 1.1 4.40
Inclined portion @125 mm c/c = (1050-125-125)/125= 7 Nos. 12mm square bar @ 1.1 kg/m as per Indian steel table kg 1 1 31.5 1.1 34.65
Vertical portion-12mm square bar @ 1.1 kg/m as per Indian steel table kg 1 1 52.8 1.1 58.08
Horizontal portion-12mm square bar @ 1.1 kg/m as per Indian steel table kg 1 1 13.2 1.1 14.52
Inclined portion @125 mm c/c = (1650-125-125)/125= 12Nos. 12mm square bar @ 1.1 kg/m as per Indian steel table kg 1 1 79.2 1.1 87.12
Vertical portion-12mm square bar @ 1.1 kg/m as per Indian steel table kg 1 1 21.6 1.1 23.76
Horizontal portion-12mm square bar @ 1.1 kg/m as per Indian steel table kg 1 1 9 1.1 9.90
Inclined portion @125 mm c/c = (1350-125-125)/125= 10Nos. 12mm square bar @ 1.1 kg/m as per Indian steel table kg 1 1 37.5 1.1 41.25
Vertical portion-12mm square bar @ 1.1 kg/m as per Indian steel table kg 1 1 26.4 1.1 29.04
Horizontal portion-12mm square bar @ 1.1 kg/m as per Indian steel table kg 1 1 9 1.1 9.90
Inclined portion @125 mm c/c = (1650-125-125)/125= 12Nos. 12mm square bar @ 1.1 kg/m as per Indian steel table kg 1 1 30 1.1 33.00
68 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
Location Unit Nos of bldg. Nos Length breadth thickness Quantity
1Buildings 1 32 32.00
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
Location Unit Nos of bldg. Nos Length breadth thickness Quantity
1Buildings 1 40 40.00
70 9.97.1150x10 mm (Wire mesh door)
Location Unit Nos of bldg. Nos Length breadth thickness Quantity
1Buildings 1 16 16.00
71 9.97.5 100x10 mm (cupboard)
Location Unit Nos of bldg. Nos Length breadth thickness Quantity
1Buildings 1 32 32.00
72 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
Location Unit Nos of bldg. Nos Length breadth thickness Quantity
1Buildings 1 30 30.00
73 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
9.101.2 Twin rubber stopper
Location Unit Nos of bldg. Nos Length breadth thickness Quantity
1Buildings 1 36 36.00
74 9.88 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
Location Unit Nos of bldg. Nos Length breadth thickness Quantity
1Buildings 1 24 24.00
75 Providing and fixing stainless steel (SS-301grade) friction hinges to the side/top hung uPVC windows, of approved quality, with necessary stainless steel screws etc. as per direction of Engineer-in-charge.
Location Unit Nos of bldg. Nos Length breadth thickness Quantity
DW1 (window portion) each 1 48 - - - 48.00
76 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:1(1 cement : 2 coarse sand(zone-III) : 1graded stone aggregate 20mm nominal size).
4.11 Cupboard (opening from 1550 to 2000 mm)
Location Unit Nos of bldg. Nos Length breadth thickness Quantity
77/4.12 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. per 50kg of cement 30 30
Ceement quantity= (PCC cement used +RCC cement used) = ( 31.88*4.13) + (155.93*8.17) = 1405 Kg. (say 1500kg) Cement (in bags) =(1500/50) =30 bags
78/4.13 Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. sqm 1 2 76.11 0.23 35.01
2.35 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :
2.35.1 Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:
79/2.35.1.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration Metre 2 76.11 152.22
80 9.45 Providing and fixing teak wood lipping of size 25x3 mm in pelmet.
Location Unit Nos of bldg. Nos Length breadth thickness Quantity
Bldg Metre 1 8 4.15 - - 33.20
81 Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.
9.90.2 Size 50 mm
Location Unit Nos of bldg. Nos Length breadth thickness Quantity
Bldg each 1 8 - - - 8.00
82 Providing and fixing chromium plated brass handles with necessary screws etc. complete:
9.92.2 100 mm (1Nos. handles per cupboard)
Location Unit Nos of bldg. Nos Length breadth thickness Quantity
Bldg each 1 32 - - - 32.00
83 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.
9.114.2 Double strip (horizontal type) (12 Nos. magnetic catcher per cupboard)
Location Unit Nos of bldg. Nos Length breadth thickness Quantity
Bldg each 1 96 - - - 96.00
84 Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete.
9.61.1 Overall width 35 mm
Location Unit Nos of bldg. Nos Length breadth thickness Quantity
Bldg Metre 1 8 12 - - 96.00
85 9.112 Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge.
Location Unit Nos of bldg. Nos Length breadth thickness Quantity
Bldg Metre 1 8 30.4 - - 243.20
86 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : (Hanger rods)
9.47.1 20 mm dia (heavy type) -1 metre long
Location Unit Nos of bldg. Nos Length breadth thickness Quantity
Bldg Metre 1 8 1 - - 8.00
87 Providing and fixing cup board shutters with 25 mm thick veneered particle board IS : 3097 marked, exterior grade (Grade I), of approved make, including IInd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge.
9.130.1 With decorative veneering on one side and commercial veneering on other side
Location Unit Nos of bldg. Nos Length breadth thickness Quantity
88 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).
9.1.1 Second class teak wood (For frame of Wire mesh door & window)
Location Unit Nos of bldg. Nos Length breadth thickness Quantity
75x38 mm frame (For frame of Wire mesh door & window)
D5 (Terrace door) sqm 1 1 4.9 0.075 0.038 0.01
Door Portion sqm 1 8 6 0.075 0.038 0.14
Window portion sqm 1 8 6.6 0.075 0.038 0.15
89 Supplying and fixing C.I. cover without frame for manholes :
19.18.2 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg
Location Unit Nos of bldg. Nos Length breadth thickness Quantity
Bldg each 1 4 - - - 4.00
19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :
90/19.1.5 300 mm diameter metre 1 5 15
19.3 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :
91/19.3.5 300 mm diameter S.W. pipe metre 1 5 15
5.9 Centering and shuttering including strutting, propping etc. and removal of form for :
92/5.9.1 Foundations, footings, bases of columns, etc. for mass concrete
Location Unit Nos of bldg. Nos Length /Width depth Quantity
Raft Shuttering
93/5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers
Floor beams sqm Same as plinth beam Quantity 110.46
Top floor beams sqm Same as plinth beam Quantity 110.46
Total for beams Total = 331.38
94/5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts
95/5.9.7 Stairs, (excluding landings) except spiral-staircases
Staircase slab including landing (Ground floor)-RCC part
Upto mid-landing level
Inclined portion sqm 1 3.16 1.3 4.11
Landing portion sqm 1 2.4 1.2 2.88
Upto start of First floor
Inclined portion sqm 1 2.78 1.3 3.61
Landing portion sqm 1 2.4 1.2 2.88
Staircase slab including landing (Terrace)-RCC part
Upto mid-landing level
Inclined portion sqm 1 2.55 1.3 3.32
Landing portion sqm 1 2.4 1.2 2.88
Upto start of Mumty slab floor
Inclined portion sqm 1 3.05 1.3 3.97
Landing portion sqm 1 2.4 1.2 2.88
RCC Pardi -150mm high sqm 2 8 0.1 1.6
96/5.9.3 Suspended floors, roofs, landings, balconies and access platform
Balcony-Ground floor top (Assuming balcony slab depth = 120mm)
Living Room Balcony sqm 2 2.965 1.35 8.01
Living Room Balcony edge beams (150mm x 550 mm) sqm 1 2.965 0.15 0.44
Dining Room Balcony sqm 2 3.135 1.35 8.46
Dining room balcony edge beams (150mm x 550 mm) sqm 1 3.135 0.15 0.47
Bed Room-2 Balcony sqm 2 3.33 1.35 8.99
Bed Room -2 Balcony edge beams (150mm x 550 mm) sqm 1 3.33 0.15 0.5
Balcony-First floor top (Assuming balcony slab depth = 120mm)
Living Room Balcony sqm 2 2.965 1.35 8.01
Living Room Balcony edge beams (150mm x 550 mm) sqm 1 2.965 0.15 0.44
Dining Room Balcony sqm 2 3.135 1.35 8.46
Dining room balcony edge beams (150mm x 550 mm) sqm 1 3.135 0.15 0.47
Bed Room-2 Balcony sqm 2 3.33 1.35 8.99
Bed Room -2 Balcony edge beams (150mm x 550 mm) sqm 1 3.33 0.15 0.5
Septic tank (15mx4.46m)
RCC Raft sqm 1 15 4.46 66.9
RCC Wall (both sides) sqm 4 4.46 3 53.52
RCC lintel (2 Nos. Inverted to each other) sqm 2 3 0.23 1.38
RCC Slab sqm 1 15 4.46 66.9
Soak pit cover sqm 1 1.375 1.375 1.89
Sub-Total = 326.15
97/5.22A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.
SN Location Unit Nos of bldg. Nos. No. of bar length Unit Wt. Qty
Considering @100kG per Cum of RCC.above plinth Kg 10616.57
98A/9.141 Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge. Metre
D1 Metre 4 5.25 21
D2 Metre 12 5.1 61.2
D5 (Terrace door) Metre 1 4.9 4.9
Door Portion Metre 8 6 48
9.142 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer-in-charge.
98B/9.142.1 Decorative finish (wood grained finish) sqm
D5 (Terrace door) sqm 1 2 0.9 1.8
Door Portion sqm 8 2.55 0.9 18.36
Name of the work: Construction of 3 Nos. B1-Type building, 02 Nos B-2-Type building, 03 Nos B3-Type Building and dismantling of existing 08 Nos A-type building at 220/132 kV Salakati Sub-station under ADD CAP 2019-24.
Sl No. Item no. (as per DSR-18/PSOR 2020) Description of items Unit Qnty Rate Rate + CI @22.86% for Kokrajhar Rate exclusive of GST 12% Amount (Rs) Activity Number
1 2.8.1 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 120000349
2 2.26 Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. 0.00 120000392
3 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. cum 329.27 253.95 312.00 278.57 91,725.02 120000391
4 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 0.00 0.00 120000443
4.1.8 1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40 mm nominal size) cum 26.13 6326.05 7,772.19 6939.46 181,334.26
5.33 DESIGN MIX CONCRETE Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). 0.00
6 5.33.2 All works above plinth level upto floor V level cum 106.17 10080.15 12,384.47 11057.56 1173933.34 120000564
7 5.22.6 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. 0.00 120000543
5.22.6 Thermo-Mechanically Treated bars. Kg 15592.60 89.65 110.14 98.34 1,533,376.67
8 6.1 Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in: 0.00 120000601
6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 15.77 6658.25 8,180.33 7303.87 115,165.71
9 6.4 Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : 0.00 120000607
6.4.1 Cement mortar 1:4 (1 cement : 6 coarse sand) cum 65.92 8512.10 10,457.97 9337.47 615,510.57
10 6.13.2 Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level. 0.00 120000618
6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) cum 225.97 1018.05 1,250.78 1116.77 252,360.09
11 6.15 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. sqm 225.97 86.45 106.21 94.83 21,429.04 120000620
12 13.1.2 12 mm cement plaster of mix : 0.00 120001400
13 13.2.2 15 mm cement plaster on the rough side of single or half brick wall of mix : 0.00 120001402
14 2.27 2.27 Supplying and filling in plinth with Jamuna sand under floors including, watering, ramming consolidating and dressing complete. cum 20.28 2161.20 2,655.25 2370.76 48,087.54 120000394
15 8.31 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. sqm 115.08 1063.45 1,306.55 1166.56 134,247.72 120001245
16 11.37 11.37 Providing and laying Antiskide Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc, complete. sqm 61.44 935.60 1,149.48 1026.32 63,057.10 120001246
17 11.41 VITRIFIED FLOOR TILE Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 0.00 120001177
18 11.23.5 Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : 0.00 120001227
19 11.24 Extra for pre finished nosing to treads of steps of marble stone. Metre 38.50 593.30 728.93 650.83 25056.96 120001229
20 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Each 8 842.15 1,034.67 923.81 7390.48 120001946
21 8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 0.00
8.2.2 Granite of any colour and shade 0.00
22 8.3 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 0.00
23 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm) sqm 281.40 774.25 951.24 849.32 238998.65 170001022
24 12.21 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design 0.00 120001318
25 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. each 6 266.60 327.54 292.45 1754.7 120001319
26 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. Each 8.00 96.75 118.87 106.13 849.04 120001946
27 22.7.1 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following perations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment etc. All above operations to be done in order and as directed and specified by the Engineerin-Charge : 0.00 120002837
22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm. sqm 218.53 1522.95 1,871.10 1670.63 365,087.79
28 10.17 10.17 Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. each 20.00 185.95 228.46 203.98 4,079.60 120001146
29 10.26.1 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer. 0.00 120001154
30 Providing and fixing soil waste and vent pipes 0.00 120001949
17.35.1.1 Sand cast iron S&S pipe as per IS:1729 Mtr 63.80 1018.05 1,250.78 1116.77 71,249.93
17.35.2.1 Sand cast iron S&S pipe as per IS:1729 Mtr 24.00 931.55 1,144.50 1021.88 24,525.12
32 17.36.1 Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 (1cement:2fine sand) in SCI/ CI 0.00 120001953
33 17.58.1 Providing lead caulked joint to SCI/ centrifugally cast (Spun) iron pipes and fittings of diametre. 0.00 120002026
34 17.37.2 Providing and fixing MS holder bat clamps of approved design to SCI/ CI (Spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix including cost cutting holes and making good the walls. 0.00 120001956
35 17.39.1.1 Providing and fixing plain bend of required degree. 0.00 120001961
36 Sand cast iron S&S pipe as per IS:1729 0.00
19.4.1.1 Providing and fixing square- mouth S.W. gully trap grade A complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300mm size ( inside) the weight of cover to be not less than 4.50kg and frame to be not less than 2.70 kg as per standard design 0.00 120002639
19.4.1.1 100x100mm size P type with FPS brick class designation 75 Each 6.00 2453.55 3,014.43 2691.46 16,148.76
37 17.7.4 Providing and fixing wash basin with C.I brackets 15 mm C.P. brass pillar taps 32 mm C.P. brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever require . 0.00 120001889
17.7.4 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap Each 8.00 2731.45 3,355.86 2996.30 23,970.40
38 17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 0.00 120001870
17.2.1 W.C. pan with ISI marked white solid plastic seat and lid Each 8.00 5540.55 6,807.12 6077.79 48,622.32
39 17.10.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 0.00 120001900
17.10.1 Kitchen sink with drain board 0.00
40 17.70 Providing and fixing PTMT Bottle Trap for Wash basin and sink 0.00 120002051
17.70.2 Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gm each 4.00 325.10 399.42 356.63 1426.52
41 17.28.1.1 Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fitting complete 0.00 120001935
17.28.1 semi regid pipe 0.00
42 17.29 17.29 Providing and fixing 100mm SCI iron grating for gully trap. Each 8.00 45.25 55.59 49.63 397.04 120001939
43 17.32.2 Providing and fixing mirror of superior glass (pf approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing 0.00 120001943
44 17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 0.00 120002055
17.73.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. Each 8.00 600.35 737.59 658.56 5,268.48
18.11.2 Conceal pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall. 0.00
Providing and fixing GI pipes complete with GI fitings including trenching and refilling, etc 0.00
External work 0.00
47 18.15.1 Providing and fixing brass bib cock of approved quality 0.00 120002141
48 18.16.2 Providing and fixing stop cock of approved quality 0.00 0.00 0.00 120002144
49 18.22.1 Providing and fixing CP brass shower rose with 15 to 20mm inlet 0.00 120002173
50 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 0.00 120002731
51 18.48 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Ltr. 4000.00 9.70 11.92 10.64 42,560.00 120002286
52 18.75 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 0.00
18.75.1 15 mm nominal bore, weighing not less than 32 gms each 12.00 43.05 52.89 47.22 566.64 120002400
53 13.47 EXTERIOR FINISHING Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 0.00 100003114
13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Sqm 589.37 162.35 199.46 178.09 104,960.19
54 13.41.1 Distempering with oil bound washable distemper of approved brand and manufacture to give and evenshade . 0.00 120001461
13.41.1 (New work (two or more coats) over and including priming coat with cement primer. Sqm 1183.25 153.45 188.53 168.33 199,175.65
55 4.17 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Sqm 171.25 681.65 837.48 747.75 128,050.32 120000477
56 13.62.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 0.00 120001491
13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture Sqm 20.84 191.40 235.15 209.96 4,374.89
57 12.41.2 Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 0.00 120001351
58 12.42.1.2 Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 0.00 120001353
59 12.42.1Coupler 0.00
61 12.43.2 Providing and fixing Unplasticised -PVC pipe clips of approved design to Unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 0.00 120001365
62 19.7.1.1 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : 0.00 120002665
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : 0.00
19.7.1.1 With F.P.S. bricks with class designation 75 Each 1.00 11687.10 14,358.77 12820.33 12,820.33
63 9.31.1 Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568, for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, as per directions of Engineer-in-charge: (Note:- Butt hinges and necessary screws shall be paid separately) 0.00 120000832
64 NS-1 Supplying and installing uPVC sliding windows made out of lead free, UV resistant green profile of BIS standard uPVC multichambered sections with corners fusion welded, fully reinforced with Galvanized steel atleat 1.5/2mm thick including interlock profile, glaxzing bead, grooving bead, brush seal, aluminium sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop-up handle, keeper, drain cap, fisher screws, packing pieces with all necessary SS screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside/outside of dowcorning/GE or equivalent complete as directed. with 5mm clear glass.(b) 2 track sliding window/openable without flyscreen using uPVC section of minimum sizes 58mm X 53mm X 2.4mm thick wall for frame, 37mm X 61mm X 2.4mm thick wall for glass sash & interlock: 43mm X 23mm (glass panel). Make: Sintex, Fenesta , Ozone ) (i) 2-3 panel with 5mm clear float glass cum 14.22 7516.51 7,516.51 7516.51 106884.77 Rate has been considered from ongoing work LOA No-NESH/CSM/2936/LOA/32 dtd. 28.07.15 Sl No 163-NS30A.
65 NS-2 Supplying and installing uPVC sliding windows made out of lead free, UV resistant green profile of BIS standard uPVC multi chambered sections with corners fusion welded, fully reinforced with Galvanized steel atleast 1.5/2mm thick including interlock profile, glazing bead, grooving bead, brush seal, aluminum sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop-up handle, keeper, drain cap, fisher screws, packing pieces with all necessary SS screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside/outside of dowcorning/GE or equivalent complete as directed. with 5mm clear glass.(b) 2 track sliding window/openable without fly screen using uPVC section of minimum sizes 58mm X 53mm X 2.4mm thick wall for frame, 37mm X 61mm X 2.4mm thick wall for glass sash & interlock: 43mm X 23mm (glass panel). Make: Sintex, Fenesta , Ozone )(ii) 4-panel or more with 5mm clear float glass cum 78.3 8728.57 8,728.57 8728.57 683447.03 Rate has been considered from ongoing work LOA No-NESH/CSM/2936/LOA/32 dtd. 28.07.15 Sl No 163-NS30B.
66 10.25.2 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 0.00 120001153
10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works Kg 676.31 142.30 174.83 156.10 105,571.87
67 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 0.00 120000866
9.48.1Fixed to steel windows by welding Kg 625.13 181.00 222.38 198.55 124,119.56
68 9.96.1 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 0.00 120000987
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 0.00
72 9.100.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 0.00 120000996
73 9.101.2 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 0.00 120001000
9.101.2 Twin rubber stopper Each 36.00 62.25 76.48 68.29 2,458.44
74 9.88 9.88 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. Each 24.00 817.50 1,004.38 896.77 21,522.48 120000965
75 9.148.1 Providing and fixing stainless steel (SS-304 grade) friction hinges to the side/top hung uPVC windows, of approved quality, with necessary stainless steel screws etc. as per direction of Engineer-in-charge. 0.00 120001093
76 4.11 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size). 0.00 120000471
4.11 Cupboard (opening from 1550 to 2000 mm) Sqm 35.01 452.25 555.63 496.10 17,368.76
77 4.12 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. per 50kg of cement 30 57.15 70.21 62.69 1880.7 120000472
78 4.13 Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. sqm 35.01 113.85 139.88 124.89 4372.4 120000473
79 2.35 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment: 0.00
2.35.1 Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete: 0.00
2.35.1.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration Metre 152.22 32.30 39.68 35.43 5393.15 120000408
80 9.45 9.45 Providing and fixing teak wood lipping of size 25x3 mm in pelmet. Mtr 49.20 61.50 75.56 67.46 3,319.03 120000860
81 9.90 Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. 0.00 120000968
82 9.92.2 Providing and fixing chromium plated brass handles with necessary screws etc. complete: 0.00 120000973
9.92.2 100 mm (4 Nos. handles per cupboard) Each 32.00 199.20 244.74 218.52 6,992.64
83 9.114.2 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. 0.00 120001020
9.114.2 Double strip (horizontal type) (12 Nos. magnetic catcher per cupboard) Each 96.00 34.15 41.96 37.46 3,596.16
84 9.61.1 Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete. 0.00 120000987
85 9.112 9.112 Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge. Mtr 8.00 85.60 105.17 93.90 751.20 120001017
86 9.47.1 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : (Hanger rods) 0.00 120002950
9.47.1 20 mm dia (heavy type) -1 metre long Mtr 8.00 152.65 187.55 167.46 1,339.68
87 9.130.1 Providing and fixing cup board shutters with 25 mm thick veneered particle board IS : 3097 marked, exterior grade (Grade I), of approved make, including IInd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge. 0.00 120001044
9.130.1 With decorative veneering on one side and commercial veneering on other side sqm 48.00 1668.30 2,049.67 1830.06 87,842.88
88 9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). 0.00 120000756
89 19.18.2 Supplying and fixing C.I. cover without frame for manholes : 0.00 120002693
19.18.2 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg Each 4.00 3219.00 3,954.86 3531.13 14,124.52
90 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 0.00 120002628
91 19.3 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 0.00 120002637
5.9 Centering and shuttering including strutting, propping etc. and removal of form for : 0.00
92 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete sqm 134.23 307.95 378.35 337.81 45345.89 120000499
93 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers sqm 331.38 608.35 747.42 667.34 221143.13 120000503
94 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts sqm 313.32 804.25 988.10 882.23 276420.3 120000504
95 5.9.7 Stairs, (excluding landings) except spiral-staircases sqm 28.13 657.75 808.11 721.53 20296.64 120000505
96 5.9.3 Suspended floors, roofs, landings, balconies and access platform sqm 326.15 766.55 941.78 840.88 274253.01 120000501
97 5.22A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. 0.00 120000549
5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 10616.57 89.65 110.14 98.34 1044033.26
98 9.141 Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge. Metre 194.50 462.25 567.92 507.07 98625.12 120001070
99 9.142 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer-in-charge. 0.00 120001072
9.142.1 Decorative finish (wood grained finish) sqm 70.56 3467.20 4,259.80 3803.39 268367.2
Bill of Quantity and Schedule of Prices
SL. No. DSR (E&M0 2018 Item No. Description of Items Unit Qty Rate (Rs) Amount Amount (Exclusive of [email protected]%)
1 7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
TOTAL SERVICE AMOUNT EXCLUSIVE OF GST RS. 91822.13
HEAD -2: SUPPLY Unit Qty Rate exclusive of GST Amount Exclusive of GST
11 PSOR,Sept21 1.1kV Grade PVC insulated Power Cable 3½ X 35 sq. mm kM 0.5 194512.00 97256.00
TOTAL SUPPLY AMOUNT EXCLUSIVE OF GST RS. 97256.00
Total Estimate for POWER CABLE 189078
Deputy Manager (SS-AM)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html
Bid Forms and Attachment.xlsx
xlsx • 1.61 MB
Price_schedule.xlsx
xlsx • 1.81 MB
Annexure H-Online Payment Through POPU.pdf
pdf • 0.09 MB
Annexure-A QR.docx
docx • 0.03 MB
Annexure-B_EMD BG.doc
doc • 0.03 MB
Annexure-C-CPG_BG_Format.doc
doc • 0.04 MB
Annexure-C1-List of Banks.docx
docx • 0.01 MB
Attachment-I-(SCC)_Affidavit for self-certification.DOCX
docx • 0.02 MB
Non-Divisible.docx
docx • 0.02 MB
IP.DOC
doc • 0.06 MB
Sample-Integrity Pact.pdf
pdf • 0.08 MB
Thumbs.db
db • 0.01 MB
Annexure-F Safety.docx
docx • 0.02 MB
Annexure-F1 Safety Plan.doc
doc • 0.09 MB
Annexure-G e-RA Sample Form.docx
docx • 0.03 MB
Attachment-II to Annexure G of SS.docx
docx • 0.02 MB
SCC Repairing Salakati.doc
doc • 0.37 MB
B1.xlsx
xlsx • 0.02 MB
B2.xlsx
xlsx • 0.02 MB
B3.xlsx
xlsx • 0.02 MB
Cost of 3 Nos Civil -F&A.xlsx
xlsx • 0.20 MB
Power Cable.xlsx
xlsx • 0.01 MB
1] Main Cover Page.doc
doc • 0.18 MB
2] Detail NIT_Repairing of Qtr Salakati.doc
doc • 0.45 MB
05-GCC-Civil works(Feb 2019).doc
doc • 0.37 MB
Standard Field Quality Plan Civil Works for Site Packages Revision 04.pdf
pdf • 2.22 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .