REPAIRS TO JOINERY PLUMBING AND OTHER MISC WORK IN TB I AREA IN THE AOR OF AGE B R MEG UNDER GE N BLORE

Amount

Taking down Chowkats or frames with shutters (without taking off shutters from the frames) area of opening not exceeding 1.5 sq m each all as specified and as directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frames) area of opening exceeding 1.5 sq m, but not exceeding 4 sq m each all as specified and as directed.

Dismantling of Single layer Mangalore pattern or similar tiles in roofing, ridges bedded in cement mortar complete all as specified and as directed

Dismantling of timber battens, for tiles, shingles etc, of any size including fillets spaced at a distance exc 15 complete all as specified and as directed

Dismantling timber scantlings 40 sq. cm and over in section, in any position as in Framed work etc complete all as specified and as directed

Demolition of un-reinforced cement concrete as in pavings not exceeding 15 cm thickness (below or above ground level), complete all as specified and as directed.

Demolition of brick work /stone masonry/pcc block masonry built in cement mortar of any description all as specified and directed.

Taking down cement plaster on brick or concrete or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete and etc complete all as specified and directed.

Material and labour, for Pre-cast cement concrete block masonry with grade ‘C’ solid blocks exceeding 10 cm in width, having minimum average compressive strength of 50 Kg / Sq cm as per IS 2185 (Part- I) 2005 and set in CM 1:6 complete all as specified and as directed.

Material and labour for Plain Cement Concrete (1:3:6) type C0, using 12.5 mm graded stone aggregate as in filling the Chowkats/frames complete all as specified and as directed.

Material and labour for, Plain Cement Concrete, (1:2:4), type B0, using 12.5 mm graded stone aggregates as in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs and the like including weathering, lightly rounded or chamfered angles and throating, including necessary forms and moulds all as specified and as directed.

S&F Flush door shutters 35mm thick, factory made as per IS:2202 (Part-I 1999) solid core construction, with block board core with decorative laminaion of both faces with lipping/frame to match as per drawing fixed to chowkhats all as speified and directed

Material and labour, for 9/10 mm thick Prelaminated particle board, exerior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber frame work of cupboards, aluminium partitions, etc., complete all as specified and as directed.

Material and labour for Rolled sections as in main and cross beams, (conforming to Fe 410-W (Grade E-250) Quality A, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates all as specified and as directed.

Material and labour Hollow / Solid steel section for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etcall as specified and as directed.

Material and labour for 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm in each pane all as specified and as directed.

Material and labour for 5.5 mm thick tinted Sheet glass, ordinary quality and glazing with oil putty in squares exceeding 0.5 sqm in each pane all as specified and as directed.

Supply and fix in repairs, Aluminium (Die cast), door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

Supply and fix, stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm, fixed with mild steel screw & bolts all as specified and as directed.

Supply and fix 150mm long Aluminium anodised barrel tower bolts of extruded section complete all as specified

Supply and fix Extruded alloy handles cast type anodised of size 150 mm all as specified and as directed.

Supply and fix Butt hinges stainless steel of size of hinges 100mm all as specified and as directed.

S&F powder coated Galvanised iron, grid suspended false ceing grid system of size 600x600mm with main runner 29x24.7x0.8mm cross tee 29x24.7x0.8mm and wall angle 22.2x22.2x0.65mm. Ceiling suspended with 3mm dia GI wire hanger fixed with steel dash fastner, butter fly clips, hold down clips etc (Main runner, cross tee& wall angle of MS galvanised with PPPCGS) including 4mm thick HPSC self textured design pre primered non asbestos fibre cement building board fixed to false ceiling complete including taking down old celing of any description .

Demolition of floor, hearth or wall tiling including cement mortar bedding (including backing) and providing Material and labour, for light coloured Virified Ceramic tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

Demolition of floor, hearth or wall tiling including cement mortar bedding (including backing) and providing Material and labour, for light coloured Virified Ceramic tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in vertical surfaces such as skirting, dado etc., set and jointed in neat cement slurry and pointed in epoxy grout to match with the colour of tiles, laid over and including provision of backing coat of 10 mm thick rendering in CM 1:3, complete all as specified and directed.

Material and labour, for 75 mm thick Plain Cement Concrete (1:3:6), type C1, using 20 mm graded stone aggregates as in paving / plinth protection, laid in panels, finishing the surfaces even and fair, incuding mastic filling in joints comprising of one part of bitumen 85/25 grade with 3 parts of sand by weight complete all as specified and as directed.

Material and labour for Plain cement concrete, 75 mm thick, type D- 2, 1:4:8 (40mm graded aggregate) as in sub base of flooing etc complete all as specified and as directed

Material and labour for, 25 mm thick, Plain Cement concrete type B0 1:2:4 (12.5 mm graded agg) as in floorings, with surfaces, finished even and fair complete all as specified and as directed

Material and labour for, rendering 15 mm thick on fair faces of brick work or concrete surfaces stone masonry in cement mortar 1:6 finished plastered surface even and smooth without using extra cement complete all as specified and as directed

Material and labour for, rendering 15 mm thick on other than fair faces of brick work or concrete stone masonry surfaces in cement mortar 1:4 with WPC, finished plastered surface even and smooth without using extra cement complete all as specified and as directed. Note :- Supply only WPC will be measured and paid separately

Supply only water proofing liquid complete all as specified and as directed

Material and labour for applying 1 mm thick wall care putty on wall / ceiling surfaces complete all as specified and as directed.

Complete removal of existing treatment on wall surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and providing material and labour for, two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and as directed.

Preparation of old treated plastered or unplastered wall surfaces of any description including brooming down with steel wire brushing scrapping down smoke soot’s, moulds, moss and efflorescence, salts, trading oil and greasy spots and filling holes with wall care putty including scrubbing with sand paper to obtain smooth surface of wall etc and applying one coat of oil bound emulsion distemper of approved tint complete all as specified and as directed.

Preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistent primer over and including 1 mm thick wall care putty, complete all as specified and as directed. Note : Quoted rate shall deemed to include for cost of wall care putty.

Preparation of new or previously untreated plastered wall surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of cement base paint over a coat of cement primer, complete all as specified and as directed.

Supply and fix in repairs, Vitreous china snow white, wash hand basin of size 550 mm x 400 mm excluding chain and plug and porcelain stopper including brackets, supply and fixing of 32 mm dia, PVC corrugated / flexible waste pipe, 800 mm long and with brass waste coupling of 32 mm dia, complete all as specified and as directed. Make : CERA, Cat No S2040103 or techno commercial equivalent in other makes, complete all as specified and as directed.

Taking down unserviceable steel / PVC pipes, supply and fixing new CPVC pipes, outer dia 20 mm, SDR 11 Plain with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed.

Taking down unserviceable steel / PVC pipes, supply and fixing new CPVC pipes, outer dia 25 mm, SDR 11 Plain with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed.

Supply and fix in repairs 15mm dia Pillar tap PTMT fancy type (Minimum weight 15mm-120gms), any colour screwed, for iron pipe and fixed complete all as specified and as directed

Supply and fix in repairs 15mm dia angle stop valve of PTMT (Minimum weight 15mm-90gms), any colour pressed screwed, for iron pipe and fixed complete all as specified and as directed

Supply and fix in repairs PVC connection (Suitable for Cold Water Supply) 15 mm size with PTMT nuts of length 450 mm, all as specified and as directed.

Supply and fix in repairs Mirror 600x450 x 5-6mm thick with frame cat No BLM-01F of PRAYAG or equivalent make complete all as specified and directed

Supply and fix, 150 mm long floor door stopper of aluminium alloy powder coated, with hard down steel spring all as specified and as directed.

Dismantling of water tanks of 1000 litres capacity from roof top and supply and fixing Rotational moulded polyethylene water storage tanks (double layered) of 1000 Litres capacity with ISI mark embossed on it, (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

Dismantling of water tanks of 2000 litres capacity from roof top and supply and fixing Rotational moulded polyethylene water storage tanks (double layered) of 2000 Litres capacity with ISI mark embossed on it, (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

Supply and fix in repairs, 25 mm dia Ball float valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and as directed.

Supply and fix in repairs, gun metal, globe or gate valves 25 mm bore (ISI marked) with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

Supply and fabrication of steel as in framed work such as grills, gratings, ladders, balusters, walk ways, railing, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framework of water tanks and similar work confirming to Fe.290.Gde-E-165 complete all as specified and as directed.

Supply and fix, Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

Supply and fix, Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding ridges / valley gutter to wall, fixed with self tapping screws all as specified and as directed.

Supply and fix, Pressed steel door frame of size 125 x 60 mm using 1.25 mm thick sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and as directed.

Supply and fix powder Coated aluminium frames (minimum thickness of powder coating 50 microns) and fabricating of doors, windows, ventilators and fixed with one or more rebates including necessary joining cleat, glazing clips, rubber packing, snap bending crews etc. complete all as specified and as directed. Note :- i) For payment purpose weight of aluminium section shall be measured and paid, ii) Cost of aluminium mongery. lock, rubber packing, rollers for sliding shall be deemed to include in the quoted rate, iii) Sheet glass, panel inserts and wire gauge shall be measured and paid for separately under respective items.

S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. Note - Glass and particle board shall be measured and paid separately under respective items.

S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed/Sliding type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as specified etc. complete shall as specified and as directed Note - Wire Cloth & Glass shall be measured and paid separately under respective items.

S&F Box type Steel Windows/Ventilators double side shutters (Windows side hung type, Ventilators top hung) pressed steel frames made out CRC Sheet of 80x60x1.25mm double rebated, Shutters box type made out of CRC Sheet of 40x20x1.0mm, windows & ventilator shutter fixed made of glass and gauge fixed with box type hinges, Aluminium die cast handles for glass shutters, Iron flat type handles for mesh shutters, Telescopic stays, etc complete all as specified incl 12mm square guard bars/grill welded with steel frame (100c/c horizontically) all as specified and directed by Engineer-in-Charge. NOTE: (i) Payment under this item will be make combined for steel frames, steel shutters and Guard bard / Grill, However unit rate quoted shall deemed to include cost of beading, fittings such as handles, hinges, Telescopic stays, locking arrangements and fixing of glass and wiremesh etc. (ii) Supply only sheet glass and stainless steel wire mesh be measured and paid separately. (iii) Weight of Grill/Guard Bars, handle,hinges and locking arrangements shall not be accounted for payment purpose . (Note : All Windows/Vent design as per CECZ TD drg No 539)

Material and labour for, Preparation of old wooden surfaces of any description not other wise described over 10 cm width or girth applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour, for preparation of new or previously untreated steel surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Material and labour, for preparation of old steel surfaces and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Demolition of existing stone sett paving tiles inculding screed bed 15 mm thick in CM 1:6, providing Material and labour for exterior grade, coloured glossy finish, rubber pressed, plain cement concrete chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specifed and as directed

Demolition of stone sett paving tiles, and providing material and labour for, Rubber moulded pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigments, laid over and including 50 mm thick M sand cushioning complete all as specified and as directed.

Removing building materials etc to a distance of exc 1.0 Km but not exc 1.50 Km, beyond the lead included in the rates, including loading, uploading and stacking at the destination etc complete all as specified and as directed

D NAGI REDDY

deepak kumar vishwakarma

RAJINDER SINGH RATAN

Sangam Construction

Atom Engineers and Builders

J PUSHPALATHA ENGINEER AND CONTRACTOR

MAA ENGINEERING SERVICERS

PRANAVI CONSTRUCTION

Sreyas Enterprises