8327 REPAIR / MAINT TO WATER TREATMENT SYSTEM, CI / GI PIPE LINES, INCL SWIMMING POOL AND ALLIED WORKS AT MIL STN SHAHJAHANPUR UNDER GE (E) BAREILLY.

Amount

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr depth in soft / loose soil and getting out for removing / laying of pipe lines complete all as specified.

Demolition of cement concrete (un-reinforced) in ground, floors or pavings not exceeding 15 Cm thick below or above ground level complete all as specified.

All as per item No 1 above but hard surfaces such as in road cutting / hard standing etc including making good disturbed surfaces to match with original complete all as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed

Removing of surplus soil to a distance not exceeding 50 Mtrs and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified.

M&L PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in floor / hard-standing, surface finished even and smooth without using extra cement to match with the existing surface complete all as specified.

Supply, Laying, jointing and leakage testing GI Pipe medium grade including all fittings such as bend, tee, elbow, union, reducer etc, laid in trenches and including dismantling and taking down unserviceable / cracked steel tubing with all fittings of the following sizes as complete all as specified and as directed :- Note :- Excavation and other earth work will measured and paid separtely for steel tubes / pipes laid in trench. directed at site of the following sizes :-

(b) 20 mm dia

(c) 25 mm dia

(d) 40 mm dia

(e) 50 mm dia

Dismantling and taking up or down unserviceable / cracked steel tubing with all fittings including separting the serviceable tubes cleaning the same and Re-laying, jointing old steel tubing and connections in new or old position including new fittings such as bends, elbows, union, tees, reducers etc; as required at site laid in trenches or on floors complete all as specified and as directed of the following sizes :- Note :- Excavation and other earth work will measured and paid separtely for steel tubes / pipes laid in trench

(a) 20 mm dia

(b) 25 mm dia

M&L for Run/Spn lead joint for CI/DI/GI water mains / fittings and finishing complete all as directed of the following sizes :-

(a) 80mm dia

(b) 100mm dia

(c ) 150mm dia

M&L for rectifying the leakage of any type dia of joint with Run/Spn lead or Flange joint with washer &nuts bolts etc Excavation & Returning filling and make good surface the disturbed portion:- Note: SPN and lead &flange washer will be measured and paid separately.

Attending the complaint of water supply of any type such as, no water supply in OH tanks in Accn or brokage of pipe any dia & rectifying the complaint within 24 hrs fitting and taking down /refixing of any dia pipe will be included in the quote rate.

Labour only for cutting of CI/DI/GI pipe 80mm to 200 mm dia carefully in repairs for inserting fittings such as bend, tee, socket pieces, collar etc; complete all as specified and as directed.

S&F gun metal iron gate valve with iron wheel head, screwed both ends for iron pipe, ISI marked including dismantling the old unserviceable existing valve complete all as specified of the following sizes:-

(a) 20mm dia

(b) 25mm dia

(c) 40mm dia

(d) 50mm dia

(e) 15mm dia

S&F in replacement, PVC Float valve (PTMT) 100 mm size with epoxy coated aluminium rod and high density polythene ball complete all as specified and as directed.

S&F in replacement, 25 mm dia, PVC bib cock , standard with male thread, complete all as speciifed and as directed.

M&L for opening up of leaking sluice valve stuffing box of 100/150 mm dia size and replacement of gland packing, nuts, bolts and washers etc all as specified and directed.

M&L for Earthing complete with using GI earth plate electrode 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness off 15 cm all around the plate with using GI Strip 25x4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel as earth lead moulded and retreived to earth plate at one end and connected to main switch / control board at another end with and including 40 mm dia GI light grade from upper end of earth plate upto external face of the wall of the building including 20 mm dia bore GI pipe light grade as water pipe from chamber to upper edge of the plate GI funnel with wire mess fixed on water pipe and provison of PCC 1:2:4 type B-1 (Using 20 mm Dia graded stone aggregate) duly reinforced with mild steel round bar 6 mm dia @ 150 mm c/c both ways with 10 mm dia mild steel bars as in lifting handle with and including necessarry excavation and earth work including laying the pipe concealed in floor / wall allas per plate NO-3 of SSR Part-I complete all as specified and directed and testing on completiopn (Note:- If the desired resistance is not found earthing shall be done by the contractor at no extra cost to Govt).

Material and labour for construction of block masonry valve pit / chambers of size 1.0m x 1.0m x 1m including necessary excavation in any type of soil. PCC 1:3:6 type C2 using 40mm graded stone aggregate as in bedding foundation / coping, PCC block masonry, 15 mm thick plaster in CM 1:4 on both side of valve with and including MS fabricated cover with angle iron frame of size 32mm x 32mm x 4mm and CRCA sheet 2mm thick with locking arrangement and applying two coats of synthetic enamel paint over a coat of red oxide primer on both side of the cover complete all as specified and directed.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried inground or drawn inconduit /pipe or fixed to poles or any other indicated situation for loop earthing etc as required Aluminium Strip 25x3mm complete all as specified and directed .

Taking down/refixing of Suction sweeper pump, Submersible, Submersible non clogging, Mono Block and booster pump after repair/ replacement of the following spare parts :-

Winding with PVC supper enameled insulated copper wire.

Nuts, Bolt and washers

Gland packing

Gasket suitable for 5 to 41 HP

Disconnecting electric connection from starter, lifting up the submersible motor and pump with the help of chain pulley and diconnecting the GI column pipe by opening nut and bolts. transportation the submersible motor from pump house to workshop for repair to submersible pump assembly 3/4 stage and replacement of old rusted shaft, S/S bush , impeller , impeller lock nut complete and transportation of repaired submersible motor to pump, connecting electrical connection to star delta starter and lowering down pump set with the help of chain pulley and connecting GI column pipe 150mm by proving 5mm thick new gasket with the help of nut and bolt suitable for 25 to 40 HP and testing complete all as specified and directed.

Disconnecting electric connection from starter Lifting up the Non Clog submersible motor and pump by disconnecting star delta connection from starter with the help of chain pulley and disconnection the GI coloum pipe by opening nut and bolts and replacement of old rusted GI Column Pipe heavy grade of size100 / 150 mm dia in pieces of 3.3 metre long, both ends flanged in the bore/open wells and joining the GI column pipe by providing 5mm thick rubber gasket, nuts and bolt and lowering down pump set with the help of chain pulley, connecting electrical star delta connection to starter, testing complete all as specified and directed.

S&F PVC insulated submerssible cable water proof flat type 3 core with stranded copper conductor cable, 10 Sqmm, 1100 volts grade including cable lugs/joints, connection to submerssible motor and other end to aluminium armoured cable including jointing complete as directed.

All as per item No 23 but of 16 Sqmm, 1100 volts submerssible cable

S&F for PVC flexible green pipe 40 mm dia for swimming pool.

S&F for PVC flexible green pipe 100 mm dia all as directed.

S&F star Delta starter fully automatic in sheet steel inclosure type ML-1.5F for 10 HP centrifugal monoset.

S&F star Delta starter fully automatic in sheet steel inclosure type ML-1.5F for 15 HP centrifugal monoset.

S&F Fully Automatic Star Delta motor starter in sheet steel enclosure for motor rating AC-3 Duty , 415 V , 50 HZ , 3 Phase 25/30 HP with ISI marked.

S&F Fully Automatic Star Delta motor starter in sheet steel enclosure for motor rating AC-3 Duty , 415 V , 50 HZ , 3 Phase 40/41 HP with ISI marked.

Taking out old unserviceable chemical dozing pump electric operated of taking out defective part, refixing the serviceable/new part reassembing the same after carrying out the necessary repair complete all as directed/ (Note New parts required for replacing shall be measured and paid separately under relevant items)

Opening the body of motor taking out burnt winding wire cleaning the the slot, rewinding the same with super enamelled copper winding wire of existing gauge, insulating material, varnishing and greasing and testing complete all as directed.

Supply and fixing the follwing parts of dozing pump for incorporating under following following spare parts :- Suction valve seat

Discharge valve housing

Antisyphon

Low level switch

Dia phragm

Foot valve assembly

Tubing

Housing

EPU assembly

Stroke knob

PP ring

M&L for GI fittings ISI marked VIZ bends, Flanges, washers, reducers, tees, elbows, sockets, dummy plugs, complete all as specified up to 100 mm bore pipe complete all as specified

Supply, laying,connecting and testing 150 mm bore, ductile iron pipes tyton joint class K- 9 suitable for including rubber joint in standard working length conforming to IS 8329 laid in trenches complete all as specified and directed.

Supply, laying,connecting and testing 100 mm bore, ductile iron pipes tyton joint class K- 9 suitable for including rubber joint in standard working length conforming to IS 8329 laid in trenches complete all as specified and directed.

M&L for Ductile special fitting such as bends,tapers.tee pieces(single and double branch) any type and angle/radius and straight connecting pieces but all end flanged complete all as specified and directed .

M & L for cleaning of RCC over head reservoirs of Capacity 50,000 Glns - 01 (Swimming Pool) by brooming down all the side walls and bottom and top, removing fungus, scales, dirt, sludge etc from inside and depositing the same at a distance not more than 100 mtr after emptying the tank completely and washing the tank inside with water and chemicals such as bleaching powder, caustic soda etc and applying one coat of white wash on internal surface of the tank and writing date of cleaning in white capital letters on black back ground in sizes letter 80x10 mm with synthetic enamel paint and marking the direction of flow and painting one coat of black bitumen's paint to all inlets, outlets, washouts and over flow pipes all as specified & directed.

All as per Sl item No 38 here-in- before but Capacity 50,000 Glns - 01 (CMH Pump House)

All as per Sl item No 38 here-in- before but Capacity 100,000 Glns - 01 (GGS Pump House)

All as per Sl item No 38 here-in- before but Capacity 100,000 Glns - 01 (MAP Pump House)

All as per Sl item No 38 here-in- before but Capacity 50,000 Glns - 01 (New Pump House)

All as per Sl item No 38 here-in- before but Capacity 50,000 Glns - 01 (MG Road Pump House)

All as per Sl item No 38 here-in- before but Fire Fitting Water Tank C-04 (SASF )

All as per Sl item No 38 here-in- before but Swimming pool well -01

All as per Sl item No 38 here-in- before but Cleaning of swimming pool drains -01

Supply only spun yarn shall be hemp and good quality it shall be free of oil, tar or greasy substance and shall be sterilized quality complete all as specified and directed.

Supply only Pig lead or uniform quality and comply with IS specification complete all as specified and directed .

S&F cast iron air realease valve with double chamber flanged type IS 14845 of 150mm bore complete all as specified and directed.

Collecting and testing of water sample bottle from Pump houses of GGS, MG Road, New Pump House, Map Pump house and CMH pump house through govt authorised laboratory for testing of various parameters as per IS 10500 complete all as specified and directed. Note :- Test result will be submitted to AGE B/R office Each Pump House -03 Times

M&L for ferric Alum

Supply only copper Sulphate

M&L for SQ Potassium Permagnate cat part No-26788,

M&L for Sodium Hypochlorite solution 4% -6% , cat part No-.S0865, Grade-LR

M&L for Calcium Hypoclorite 65-70% (High strength calcium based granular chlorination chemical) more stable than Chlorine Gas and free from toxicity and safe for drinking water.

M&L for Crystal bright swimming pool & Spa clarifier and conditioner complete all as specified and directed.

Supply and fix fully automatic water level controller and indicator ,3 sensor for OH Tank 2 HP Load capacity each switch 220V 50HZ complete internal and external wiring included in quote rate complete all as specified and directed.

Supply only toe chain of 16 mm dia mild steel wire rope in which both side should be looped with looping hook complete all as specified and directed .

Supply only nylon rope of size 25 mm for suction sweeper motor.

Supply only 40 mm dia rope made out of san complete all as specified and directed.

Supply only helix swimming pool 18 inch vaccum head , heavy duty aluminium weighted swimming pool vaccum head on wheels for all type of pool floor cleaner complete all as specified and directed.

Supply and fix testing and commissioning Integral LED aviation light luminaires comprising of aluminium hsg. with polycarbonate enclosure including making connection twin core twisted flexible wire complete all as specified and directed.

Supply & Fixing MCCB, 4 Pole, 160 Amps, 415 Volt, 36 kA including connecting up using suitable size of lugs.

Supply & Fixing MCCB, 4 Pole, 250 Amps, 415 Volt, 36 kA including connecting up using suitable size of lugs.

Supply & Fixing MCCB, 4 Pole, 200 Amps, 415 Volt, 36 kA including connecting up using suitable size of lugs.

Supply & Fixing MCCB, 4 Pole, 125 Amps, 415 Volt, 36 kA including connecting up using suitable size of lugs.

Supply & Fixing MCCB, 4 Pole, 100 Amps, 415 Volt, 16 kA including connecting up using suitable size of lugs.

M&L for boring on existing CI pipe 80 mm to 200 mm dia size for branch connections of 25mm to 50mm dia by fixing of MS clamp 50x4mm cut to length and bent to shape, drilled and welded with GI socket of suitable size including rubber packing, nut, bolt etc and testing complete all as specified and direted.

Supply , Laying, jointing and testing GI Column Pipe heavy grade of size 150 mm dia in pieces of 3.3 metre long , both ends flanged in the bore/open wells and joining the GI column pipe by providing 5mm thick rubber gasket, nuts and bolt and lowering as specified and as directed

Supply, Laying, jointing and testing GI Column Pipe heavy grade of size 100 mm dia in pieces of 3.3 metre long, both ends flanged in the bore / open wells and joining the GI column pipe by providing 5mm thick rubber gasket, nuts and bolt and lowering as specified and as directed

Disconnecting electric connection from starter, lifting up the Centrifugal motor and pump with the help of chain pulley and diconnecting the GI column pipe by opening nut and bolts, transportation the Centrifugal motor from pump house to workshop for repair to Centrifugal motor assembly and replacement of old rusted shaft, S/S bush, impeller, impeller lock nut complete and transportation of repaired submersible motor to pump, connecting electrical connection to star delta starter and lowering down pump set with the help of chain pulley and connecting GI column pipe by proving 5mm thick new gasket with the help of nut and bolt suitable for 5 to 10 HP and testing complete all as specified and directed.

S & F 100mm dia, NRV, class PN-1.6, heavy duty, both ends flanged all nuts, bolts, washers, gaskets etc; including dismantling of old unserviceable NRV complete all as specified and directed

All as per Sl item No 72 here-in- before but 150mm dia

S & F 80mm dia sluice valve, class PN-1.6, heavy duty, both ends flanged with steel spindle & check nut, CI operating wheel and all nuts, bolts, washers, gaskets etc; including dismantling of old unserviceable sluice valve complete all as specified and directed.

All as per Sl item No 74 here-in- before but 100mm dia

All as per Sl item No 74 here-in- before but 150mm dia

Supply and fixing chlorination dosing pump chemical feeder for injecting calcium hypochlorite employing motor driven reciprocating chemical pump having upto 2 U.S GPD to 40 U.S GPD and adjustable high pressure of upto 100 PSI and 100 ltrs FRP tank with lid & level guage along with agitator and shaft & blade in olastic mounted tank complete all as specified and as directed.

Supply only chlorine test kit for Pump houses and for swimming pool with liquid to check the PPM of water complete all as specified and directed.

Supply and fixing in replacement of solar water heating element as per existing complete as specified and directed.

Supply and fixing in replacement of Thermostat for solar water heater system complete all as specified and directed.

Supply and fixing in replacement of solar waterproof floating LED Pool light, 3 W 1.2 V 4 color changing lights all as specified and directed.

M & L for painting of existing panel with the same existing colour and repair and replacement of the doors of the existing panel complete all as specified and directed.

Repairing and servicing of complete accessories of solar water Heater also check leakage of the pipe, tanks, panels, and check loose wire connections and replace wires complete all as specified and as directed

HASINI ENTERPRISES

M/S SHAHABUDDIN AND SONS

M/S CHAUHAN ELECTRIC WORKS