WELCOME MAINTENANCE B AND R AND E AND M AND CERTAIN CONNECTED WORKS AND REPAIR TO DRAIN, FOOTPATH, PLINTH PROTECTON, FENCING ETC IN OFFICERS MESS ENCLAVE AT 20 WING AF STATION UNDER GE AF BAGDOGRA

Amount

M&L for preparation of old decorated plastered/ unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on wall surfaces complete all as specified and directed.

All as per item No 1 here in above, but on ceiling surfaces complete all as specified and directed.

M&L for preparation of old decorated plastered/ unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper on wall surfaces complete all as specified and directed.

All as per item No 3 here in above, but on ceiling surfaces complete all as specified and directed.

M&L for complete removal of existing treatment of any description on old decorated wall surfaces and applying 1.5mm thick JK/Birla wall care putty and two coats of oil bound distemper complete all as specified and directed.

M&L for preparation of old painted wood or wooden based surfaces of any description not otherwise described exc. 10 cm in width or girth and applying one coat of synthetic enamel paint white or tinted complete all as specified and directed.

All as per item No 6 here in above, but on steel surfaces complete all as specified and directed.

Taking down cement plaster on brick wall surfaces including reeking out joints hacking for key scrubbing down with water etc and removing the rubbish out of MoD land complete all as specified and as directed.

M&L for 15mm thick rendering on brick work or concrete surfaces in Cement mortar 1:6 finish even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered wall surfaces and applying two coats of oil bound distemper over 1.5mm thick Brila/JK wall care putty over a coat of alkali resistant priming complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish out of MoD land complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surface 350 x 250 x 7 mm or 450 x 350 x 7 mm thick with matching highlighter over 10 mm thick rendering in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles (Size and design/colour of tiles will be approved by GE) complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed in Cement mortar 1:6 as in floor (Size and colour of tiles will be approved by GE) complete all as specified and directed.

M&L for vitrified ceramic tiles 10 mm thick (square /rectangular) polished light shade, area of each tiles not exc 0.36 sqm over and including 20 mm thick cement mortar 1:6 screed bed in floors set and jointed in neat cement slurry and pointed in white or coloured cement match complete all as specified and as directed.

M&L for vitrified ceramic tiles 10 mm thick (square /rectangular) polished light shade, area of each tiles not exc 0.36 sqm over and including 10 mm thick rendering in cement mortar 1:4 as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement match complete all as specified and as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F for Powder coated galvanised iron snap grid frame work of size 600 x 600 mm for false ceiling comprising of Main runner 'T' section of size 38mm x 24mm x 0.40mm thickness, Cross 'T' of size 29mm x 24mm x 0.3mm thickness and wall angle of size 24mm x 24mm x 0.43mm thick suspended with 4mm dia GI wire from purlin @ 1.20m c/c and fixed with 4mm thick designer ceiling boards complete all as specified and directed.

Taking down shutters of any description exc 1.00 sqm each but n.exc 2.00 Sqm complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but not exc 4 Sqm each and removing from the site including making good the disturbed surfaces of wall etc to match with existing adjoining surfaces complete all as specified and as directed

S&F 2nd class hard wood plain solid straight chowkhat or frame, wrought, framed, rebated on the solid, put together with glue and pinned at joint complete all as specified and as directed..

M&L for Treating ends of posts back of chowkats etc of area tarred exceeding 0.1 Sqm but n.exc 0.5 Sqm each with tar or coal tar black paint including sanding with clean sharp sand of newly tarred or painted surfaces complete all as specified and as directed.

S&F Mild steel hold fast made of flat iron conforming to Fe-290 Gde E-165 of size 25 x 3 mm bent to shape required with splitting end and drilling holes for fixing nuts & bolts (including nuts & bolts) including treating the steel surfaces with tar or coal tar black paint and sanding neatly newly tarred surfaces with clean sharp sand all complete as specified and as directed.

M&L for PCC type C1,1:3:6 (using 20 mm graded aggregate) for holdfast blocks complete all as specified and as directed.

S&F 40mm thick factory made designer door shutters,solid core construction with particle board core and covered with decorative face veneer with lipping on both sides and fitted to chowkats complete all as specified and as directed.

S&F 40mm thick flush shutters, solid core construction with particle board core and ply wood face panels, commercial type on both sides and fitted to chowkats complete all as specified and as directed.

S&F 2nd class hard wood 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed Note: Wire mesh in panels shall be measured separately.

M & L for Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified and as directed.

S&F galvanised steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F for 100mm long Stainless steel butt hinges, medium weight, complete all as specified and directed.

S&F 150mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S & F 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing with complete accessories all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 200mm long complete all as specified and directed.

S&F in repairs, 18/19 mm thick prelaminated particle boards, exterior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work complete all as specified and directed.

S&F 75mm long Stainless steel butt hinges, medium weight, complete all as specified and directed.

S&F 75 mm hasp & staple, safety type, aluminium anodised with mild steel steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F 100mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 100mm long complete all as specified and directed.

S&F in repairs, galvanised steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repairs, 3mm thick sheet glass, ordinary quality and glazing with oil putty/ wooden beadings complete all as specified and directed.

S&F in repairs, Figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sq.m in each pane complete all as specified and directed.

S&F in repairs, 1000 to 1400 mm long and 20 mm wide door seal incl 10 mm wide cotton complete all as specified and directed .

S&F in repairs, corner shelf of PTMT fixed with chromium plated brass screws and wooden/ plastic cleats (Minimum weight 300gms) complete all as specified and directed.

S&F in repairs, glass corner shelf with chromium plated guard and fixing arrangements complete of size 300mm complete all as specified and directed.

S&F in repairs, sheet glass shelf glass assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed with chromium plated brass screws complete all as specified and as directed

S&F in repairs, CP toilet paper holder with flat recessed type stainless steel fixed to walls with chromium plated brass screws complete all as specified and directed

S&F in repairs, CP soap dish fixed to wall with screw complete all as specified and directed.

S&F in repairs, brass chromium plated shower rose 125mm size with or with out swivel joints, any size including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs, 15 mm bore health faucet with 1 mtr tube & hook complete all as specified and directed.

S&F in repairs, 150mm long aluminium anodised tower bolts of extruded section and fixed, complete all as specified and directed.

S&F in repairs, 300mm long aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixed clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast- aluminium alloy and fixed complete all as specified and directed .

S&F in repairs, 100mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S&F in repairs, 75mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-21 complete all as specified and directed.

S&F in repairs, 300mm , mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repairs, 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F in repairs, 100mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F in repairs, 75 mm hasp & staple, safety type, aluminium anodised with mild steel steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repairs, 25mm dia, fancy type stainless steel drapery rod (curtain rod) complete all as specified and directed.

S&F in repairs, 25mm dia stainless steel decorative type bracket and side cups for curtain rods fixed with screws complete all as specified and directed.

S&F in repairs, 20 mm dia brass chromium plated tubular towel rail, D type, 60 cm long between flanges fixed with brass screws complete all as specified and directed.

S&F in repairs, 200mm dia brass chromium plated towel ring complete all as specified and directed.

S&F in repairs, 140 mm length door stopper aluminium alloy body and tongue, anodized, with hard drawn steel spring, complete all as specified and directed.

S&F in repairs, ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F in repairs, aluminium (extruded section body) door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters 851 mm to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repairs, double action type floor spring hydraulically regulated made up of min 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot of brass, other parts made of Mild steel complete all as specified and directed.

S&F in repairs, 15 mm bore chromium plated fancy type angle valve with elegant knob screwed down high pressure, with crutch or butter fly handle screwed for iron pipe or for unions complete all as specified and directed.

S&F in repairs, 15 mm bore chromium plated fancy type stop cock (concealed type) with long shank and cup with elegant knob screwed down high pressure, with crutch or butter fly handle screwed for iron pipe or for unions complete all as specified and directed.

S&F in repairs, 15 mm bore chromium plated fancy type two way angle valve with elegant knob screwed down high pressure screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs, 15 mm bore chromium plated fancy type long body bib taps with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs, 15 mm bore chromium plated fancy type two way bib taps with elegant knob screwed down high pressure complete all as specified and directed.

S&F in repairs, 15 mm bore chromium plated fancy type pillar tap for WHBs with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs, Chromium plated 15mm bore centre hole basin mixer with extended casted spout with 450mm long braided hoses fancy type complete all as specified and directed.

S&F in repairs, 15mm bore brass CP Wall mixer with long bend pipe for connection to over head shower and fixed complete all as specified and directed.

S&F in repairs, 15mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or union and fixed complete all as specified and directed

S&F in repairs, 20mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or union and fixed complete all as specified and directed

S&F in repairs, 25mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or union and fixed complete all as specified and directed

S&F in repairs, 32mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repairs, 32 mm bore PVC waste pipe for WHB/urinals 600mm long with union etc complete all as specified and directed.

S&F in repairs, 15mm bore Bib tap standard of PTMT(Minimum weight 90 gms) any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. (Make: Prayag or equivalent as approved).

S&F in repairs, ball valve 15mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. (Make: Prayag or equivalent as approved).

S&F in repairs, ball valve 20mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. (Make: Prayag or equivalent as approved).

S&F in repairs, ball valve 25mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. (Make: Prayag or equivalent as approved).

S&F in repairs, PVC connection 15mm dia and 450 mm long with 2 Nos PTMT nuts with washers complete all as specified and directed.

S&F in repairs, CI bracket for WHB or kitchen Sink etc complete all as specified and directed.

S&F in repairs, 125 mm dia CP grating doom with or without waste hole complete all as specified and directed.

S&F in repairs, plastic water closet seat cover white/coloured closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs, 10 Ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repairs, flush pipe of polyethylene of low or high density or PVC 32mm dia, for low level flushing cistern complete all as specified and directed.

S&F in repairs, vitreous china wash down water closet pan (pedestal pattern) white including connection to drain (or outgoing pipe) and to flush pipe, antishonage pipe and Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed.

S&F in repairs, wash hand basin vitreous china white, (flat back or angle back type) of size 550X400 mm including cutting for and pinning in ends of brackets or erecting stand including CP waste coupling and waste pipe complete all as directed

S&F in repairs, Cascade type europen water closet coloured floor mounted, with seat cover , seat cover hanging devices complete all as specified and directed.

S&F in repairs, PVC tank covers suitable for 500 litres to 2000 litres tanks complete all as specified and directed

S&F in repairs, 75mm dia PVC (SWR) pipes, single socketed, in any length, with rubber rings fixed to walls complete all as specified and directed.

S&F in repairs, 110mm dia PVC (SWR) pipes, single socketed, in any length, with rubber rings fixed to walls complete all as specified and directed.

S&F in repairs, stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory, with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, over all size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs, Steel plate rack made of 1mm thick stainless sheet of overall size 900x 900x 250mm with providing necessary partition shelves & hanging arrangement etc as per manufacturer trade pattern and fixed to wall with wooden plug with brass chromium plated screws complete all as specified and as directed.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 20 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 25 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15mm bore of medium grade galvanised steel water tubing, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20mm bore of medium grade galvanised steel water tubing, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 25mm bore of medium grade galvanised steel water tubing, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F for 3-layer PP-R P o l y p r o p y l e n e random copolymer) 20mm dia concealed pipes SDR 7.4 (PN-16) stabilised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed.

Dismantling 500 ltrs capacity water tanks and removing to store complete all as specified and directed

Dismantling 1000 ltrs capacity water tanks and removing to store complete all as specified and directed

S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) triple layer (ISI marked) complete all as specified and directed.

S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) triple layer (ISI marked) complete all as specified and directed.

Cleaning and removing all scale and dirt, etc. from 500 ltrs PVC tanks and from mouths of circulating pipes, etc. complete all as specified and directed.

Cleaning and removing all scale and dirt, etc. from 1000 ltrs PVC tanks and from mouths of circulating pipes, etc. complete all as specified and directed.

Demolition of brickwork/stone masonry built in cm including all quoins ,arches ,pillars, etc, but excluding ashlar facings ,dressed stonework and precast concrete articles complete all as specified and directed

M & L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Repairing of floor mounted Cascade type europen water closet including replacement of internal assembly (syphon, float valve, push buttons etc) of cistern and make it function in all respect complete all as specified and directed

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar complete all as specified and directed

M&L for 18 to 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including pointing with admixture of pigment to match with shade of granite, laid over and including 20 mm thick cement mortar 1:4 including rounding the edges complete all as specified and directed.

Taking down carefully copper/aluminium point wiring complete (light, fan, plug point & power complete along with fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets , removing materials to store and offering credit & making good of disturb surfaces of wall/floors etc as specified & directed.

M& L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FRLS type drawn through and including PVC concealed conduit (ISI marked) of adequate size and its accessories with sunk cast iron/pressed steel terminal boxes of size 1.6mm thick, with 3mm thick plastic laminated sheet cover of adequate size for one light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistrand), FRLS type, PVC insulated and unsheathed with colour code earth wire connected to common earth dolly at one end and metalic bodies of luminaires/ fan at other end complete as per site requirement and all as specified & directed by Engr-in-Charge for the following:- (a) One light point or one fan point controlled by one switch with cables 1.5 sq. mm size Note:- Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

All as per ser item No. 118 above here in before but for One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.

All as per ser item No. 118 here in before but for One 5 Amp 5 pin socket outlet point on independent board.

All as per ser item No. 118 here in before but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 5 pin socket outlet point including PVC cable 4 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to common earth & earth terminals including boards for mounting purposes.

All as per ser item No.118 here in before but one light point controlled by 2 way switches.

All as per ser item No.118 here in before but one bell/buzzer point controlled by one bell push button on the same board with other switches or independent.

Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FR type drawn through and including PVC casing caping/ PVC Conduit (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, columns/ beams along with 1.5 Sqmm (nominal area) copper conductor cable (multistranded) PVC insulated and unsheathed as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boards with sunmica top for mounting switches, sockets, fan Regulators, accessories etc as per site requirement and all as specified & directed by Engr-in-Charge for the following:- (a) One light point or one fan point controlled by one switch with cables 1.5 sq. mm size.

All as per ser item No.124 above here in before but for One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.

All as per ser item No. 124 here in before but for One 5 Amp 5 pin socket outlet point on independent board.

All as per ser item No.124 here in before but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 5 pin socket outlet point including PVC cable 4 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to common earth & earth terminals including boards for mounting purposes.

All as per ser item No. 124 above here in before but one bell/buzzer point controlled by one push button on the same board with other switches or independent.

All as per ser item No.124 here in before but one light point controlled by 2 way switches.

Supply and Fixing bell push, flush type, 5 Amp single pole, 230 volts white finish all as specified & directed.

Supply and fixing switch piano flush button 5 Amp single pole 2 way 230 volts white finish all as specified & directed.

Supply and fixing in replacement switch piano flush button 5 Amp single pole one way 230 volts white finish all as specified & directed.

Supply and fixing in replacement of socket outlet flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & directed.

Supply and fixing in replacement switch socket combination flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish.

Supply and fixing in replacement of switch socket combination multipurpose flush type 2 in 1 type (3 and 5 pin) 5/15 Amps, 230V, AC.

Supply and fixing in replacement ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish.

Supply and fixing in replacement surface and wall mounted LED batten 20 watt - 4Ft White with Aluminium housing & integrated electronic driver, high performance batten and efficacy should not less than100 lumen/watt and all as specified and directed.

Supply and fixing in replacement surface and wall mounted LED batten 10 watt - 2Ft White with Aluminium housing & integrated electronic driver, high performance batten and efficacy should not less than 100 lumen/watt and all as specified and directed.

Supply & fixing in replacement LED light fitting 1x9W/ 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size as per site requirement and all as specified and directed.

Supply and fixing in replacement energy efficient Street/ Roadway/Building Security Luminaire LED fitting upto 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, including brackets and all accessories needed to fixed to the wall or pole all as per site requirement and as specified and directed.

Supply and Fixing in replacement Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting complete.

Supply & fixing in replacement stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd all as specified and directed of approved make.

Supply & fixing in replacement exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete as per site requirement and all as specified and directed of approved make.

Taking down carefully copper/aluminium sub main wiring complete along with all connected accessories etc as specified & directed.

Supply and fixing of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 6 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note:- (i) Two runs of cables and one run of continuous earthing cable drawn in conduit/ casing and caping will be measured as one length of sub main. (ii) PVC conduit / casing caping and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

Supply and fixing of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 10 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 10 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note:- (i) Four runs of cables and two run of continuous earthing cable drawn in conduit/ casing and caping will be measured as one length of sub main. (ii) PVC conduit / casing caping and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

Supply and fixing of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 6 Sqmm drawn through in and including rigid PVC heavy duty PVC casing caping upto 32mm or PVC conduit upto 25mm on wall surface/ recessed as required at site including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note:- (i) Two runs of cables and one run of continuous earthing cable drawn in conduit/ casing and caping will be measured as one length of sub main. (ii) PVC conduit / casing caping and its accessories is deem to be included in this item rates.

Supply and fixing of submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 4 Sqmm drawn through in and including rigid PVC heavy duty PVC casing caping upto 32mm or PVC conduit upto 25mm on wall surface/ recessed as required at site including 4 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note:- (i) Two runs of cables and one run of continuous earthing cable drawn in conduit/ casing and caping will be measured as one length of sub main. (ii) PVC conduit / casing caping and its accessories is deem to be included in this item rates.

Taking down carefully DB/ Sheet Metal Enclosure with existing MCBs complete & making good of disturb surfaces of wall/floors etc as specified & directed.

Supply and fixing distribution board sheet metal enclosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 415 volts, 200 Amp rated bus bar with front openable cover suitable for TP & N 4 ways all as specified & directed.

Supply and fixing distribution board sheet metal enclosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 4 ways all as specified & directed.

Supply and fixing distribution board sheet metal enclosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways all as specified & directed.

Supply and fixing sheet metal enclosure (factory made), VTPN Vertical Distribution Boards, IP43 protection suitable for MCCB's upto 125A as as incomer, Double Door, 4 way with 250 Amps rated copper busbar all as specified and directed of make as approved.

Supply and fixing sheet metal enclosures with plug socket single pole and neutral with two pin and earth plug and with one MCB of 20 Amps (SP) complete all as specified .

Supply and Fixing in replacement of MCB SP 6-32 Amps/ 40 Amps, 230 Volts, 50 Hz with 10 KA ,'C' series all as specified & directed by Engineer-in-charge.

Supply and Fixing in replacement of MCB SPN/DP upto 32 Amps, 230 Volts, 50 Hz with 10 KA ,'C' series all as specified & directed by Engineer-in-charge.

Supply and Fixing in replacement of MCB TPN upto 32 Amps, 230 Volts, 50 Hz with 10 KA ,'C' series all as specified & directed by Engineer-in-charge.

Supply and Fixing in replacement of MCB TPN upto 40 to 63 Amps, 230 Volts, 50 Hz with 10 KA ,'C' series all as specified & directed by Engineer-in-charge.

Supply and Fixing Decorative wall light fixture made up of Polycarbonate, suitable for lamp (B-22 base) including one LED Lamp upto 1 x 9/10 W LED Lamp (B22) complete with all accessories prewired incl three core copper cable 23/0.0076 from ceiling rose to light fittings. Make : Havells (GLOBE) or MARS or equivalent in Bajaj/Phillips/Jaquar/C&S as approved)

Supply and fixing Round/Square surface mounted LED panel 6 Watts, PDC aluminium housing and high translucent frosted plastic diffuser makes it a robust Luminaire, Efficacy not less than100lm/w, suitable for fixing at roof/ceiling including connecting up with three core flexible copper conductor cable of suitable size complete as per site requirement and as directed.

Supply and fixing Round/Square surface mounted LED panel 12 Watts, PDC aluminium housing and high translucent frosted plastic diffuser makes it a robust Luminaire, Efficacy not less than100lm/w, suitable for fixing at roof/ceiling including connecting up with three core flexible copper conductor cable of suitable size complete as per site requirement and as directed.

S & F in replacement of Post top, 30W LED lamp, LED post top Lantern E-Top with low glare optical design acrylic diffuser wired with all accessories, 240V, including connecting up with three core flexible copper conductor cable of suitable size complete as per site requirement and as directed.

Supply and fix in replacement of MCCB 125 Amp, TP/TPN/FP, 415 volts with rupturing capacity 16KA as per site requirement complete all as specified and directed.

Material & Labour in replacement of Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion.

M&L in replacement submain wiring PVC insulated FRLS single core with stranded copper cable of size 6 Sqmm in 2 runs and 6 Sqmm one run for earth drawing through existing surface, casing/caping, recessed steel/PVC conduct complete as per site requirement and all as directed. (Note:- Two runs of main cable and one run of earth cable all-together shall be considered as one length).

M&L in replacement of submain wiring PVC insulated FRLS single core with stranded copper cable of size 4 Sqmm in 2 runs and 4 Sqmm one run for earth drawing through existing surface, casing/caping, recessed steel/PVC conduct complete as per site requirement and all as directed. (Note:- Two runs of main cable and one run of earth cable all-together shall be considered as one length).

Replacement of plastic laminated sheet top cover 3mm thick of approx size 4" x 4" or 6" x 4" as per site requirement and fitted with MS galvanised screws and cup washer in repairs including cutting of sheet and shifting of all fixtures from the old switch board and connection complete, all as specified and directed by Engr-in-charge. (Make :- Anchor/ Hylum/Mayur).

All as per item No 167 here in after but for plastic laminated sheet top cover 3mm thick of approx size 8"x 5" or 9" x 7". (Make :- Anchor/ Hylum/Mayur).

All as per item No 167 here in after but for plastic laminated sheet top cover 3mm thick of approx size 11"x 9". (Make :- Anchor/ Hylum/Mayur).

Taking down hanging laminated sheet cover of any size and re-fixing the same in repairs by replacing rusted screws and cup washers etc., complete, all as directed.

Supply and fixing in repairs for Circular Hylam Sheet upto 10 Cm dia of 3 mm thick including brass machine screws of suitable size as per site requirement (for using as Junction box Cover) all as directed.

All as per item No 171 above here-in-after but for Circular Hylam Sheet of 15 Cm dia of 3 mm thick (for using at ceiling as Canopy Cover for ceiling fan) all as directed.

Demolition of (Un reinforced) Cement Concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) including disposal of debris out side MD land complete all as specified and directed.

M&L for 75 mm thick, PCC (1:4:8), type D2 (using 40 mm graded stone aggregate) as in sub base etc complete all as specified and as directed.

M&L for designed, pre polished chequered cement concrete tiles 25mm thick with grey cement and pigments set, jointed & pointed in neat cement slurry, laid over 20mm thick screed bed in CM 1:6 mixed with pigments match the shade of tiles complete all as specified and directed.

M & L for PCC 1:3:6 type C2 (using 40mm graded aggregate) 75mm thick as in plinth protection/ path/ paving laid in panels, finishing the top surface even and smooth with out using extra cement complete all as specified and directed.

M&L for Forming Contraction (Dummy) joints 50mm deep X 10 mm wide, filled with sealing compound Grade 'A' etc complete all as specified and as directed.

M & L for 50mm thick sand cushioning to receive interlocking tiles incl spreading, levelling in layers complete all as specified and directed.

M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade With Grey Cement and pigment complete all as specified and directed.

Demolition of cement concrete of any description and in any position etc including disposal of debris out side MD land complete all as specified and as directed.

M&L for Cement concrete (1:2:4), type B1 (using 20mm graded aggregate) as in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement complete all as specified and directed.

M&L for PCC (1:2:4) type B1, (using 20mm graded stone aggregate) as in coping, kerbs etc complete all as specified and as directed.

M &L for Brickwork with subclass ‘B’ old size bricks, straight or curved on plan exc 6m mean radius built in 1:4 complete all as specified and as directed.

All as per item No 184 above but except bricks.

M & L for Brickwork with subclass ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls built in built in cement mortar 1:4 complete all as specified and as directed.

M&L for 15mm thick rendering in two layers ,1st coat 10mm thick in cement mortar 1:6 and 2nd coat 5mm thick in cement mortar 1:4 mixed with water proofing compound on brick work or concrete surfaces finish even and fair complete all as specified and as directed.

Supply only integral water proofing compound ISI marked.

Demolition of RCC of any description and in any position not otherwise specifically provided for etc including disposal of debris out side MD land complete all as specified and as directed.

M&L for precast cement concrete (1:2:4) type B-1 (20mm graded aggregate) in cover slab for drain and placing in position etc complete all as specified and as directed.

M&L for Mild steel bars (TMT bars) 10mm dia and over cut to length, bent to shape required including cranking bending, spirally for hoping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia, complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Supply only 4mm dia Chain link MS galvanised fencing, weight not exceeding 4kg per sqm complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

S&F in repairs, Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed

Restraining and resecuring including making good staples etc. of Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

Dismantling structural steel work including doors, gates, fencing posts etc but excluding framed truss etc complete all as specified and directed.

M&L for mild steel farmed work as in doors, gates of angle iron, flat iron or other section with gusset plates, rails, braces, hold fast, pin and pintol hinges, sliding bolt etc. complete, drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides ) and hanging; also fastening and fixing complete all as directed.

Dismantling posts or struts ( steel or RCC) any section including taking out embedded portion in concrete, brick work, masonry etc and making good disturbed ground to match with the existing surface complete all as specified and directed.

S&F for mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to e-290 Gde E-165 complete all as directed.

M&L for PCC (1:3:6) type C 2 (using 40 mm graded stone aggregate ) as in foundation filling and mass concrete complete all as specified and directed.

Supply only Steel round bar 10 mm dia and over for tying chain link fencing etc complete all as specified and directed.

Supply and fixing screw bolts (machine made) with hexagonal or square head at one end and rounded the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5 cm but n.exc 10 cm and dia of shank 11 to 15mm and fixed in position complete all as specified and directed.

M&L for preparation of new or untreated steel and iron surfaces of any description not exc.10 cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new or untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.

NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule A notes for details. 3. For measurement purposes in respect of those building for which audited periodical services measurement books are available; quantities shall be taken from PSMBs direct and entered in Measurement Book (IAFW-2261) and in respect of those buildings for which audited PSMBs are not available, detailed measurements of works shall be taken and entered in Measurement Book(IAFW-2261) in the usual manner.

M/s Chakraborty Enterprise

SREE SWAPAN KUMAR GHOSH

BUILDERS ASSOCIATE

SHRI P P SHARMA

MESSERS D S ENTERPRISE

M/S B K ENTERPRISE

M/S SUNNY ENTERPRISE

NIRANJAN SARKAR