VEGETATION CLEARANCE OF RUNWAY, TAXIWAY, AND DISPERSAL SHOULDERS AND CERTAIN MISC WORK FOR CHAKERI, KANPUR

Amount

Cutting of grass by tractor with jungle jeem (machnical slasher) where ever required including removing material obtained from cutting up to 100 m from adjoining edge of runway / taxi-way complete all as specified and directed. Notes:- (i) Contractor will deploy his own set-up of tractor with jungle jeem with POL and MT driver for cutting of grass. (ii) In first three months, the contractor will deploy 02 Nos tractor with one jungle jeem per day for cutting of grass and there after 01 No tractor with one jungle jeem will be continue for the balance period. The number of tractor to be deployed per day may be increased or decreased as per Air Trafic Control (ATC) Unit requirement as directed by Engr-in-Charge. (iii) Each tractor with jungle jeem will be in operation from 09.00 AM to 5.00 PM (08 Hours) including lunch break of 0.50 Hours at mid day. (iv) The Motor/Tractor will be run/operated by person having vehicle licence for heavy vehicle from the state transport authority. (v) Availability of working hours and site for cutting of grass by Jungle jeem will depend on Air Trafic Control (ATC) Unit . Nothing extra shall be admisible if intermittent working hours is available due to operational activity.

Cutting of grass by manualy operated bush cutter machine of areas around various sign boards. Installation, post, DTGM and runway shoulders and where mechanical means can not be deployed including cleaning away all grass vegetations, sampling shrubs, brushes weeds and roots of trees etc. and removing rubbish at low line area exceeding 200 m complete all as specified and directed. Note : (i) Availability of working hours for cutting of grass will depend on Air Trafic Control (ATC) Unit. Nothing extra shall be admisible if intermittent working hours for cutting of grass are available due to operational activity.

Repair to existing construction and dummy joints on rigid pavement of runway, taxiway and dispersal of air field with following activities complete all as specified and directed : (i) Raking out old decayed/damaged existing sealing compound with backup rod of any description and cleaning the joints thoroughly by removing dust, dirt, foreign material by appropriate electric cutter and air blower. (ii) Removing the existing sealing compound from the edges, bottom and sides of the joints by cutting the edges, bottom and sides of the joints by mechanical tool (diamond cutter) to make the cross section of joint truly rectangular. Cutting of edges/sides/bottom of joints shall be done by using diamond cutter only. (iii) Once again cleaning the joints with compressed air and applying two primer coats (with interval of 30 minutes between each coat) upto the full depth & width of the existing joints. (iv) Sealing the joints with polyurethane joints sealant ( upto full depth of existing joint) all as per manufacturers instruction including applying masking tap on edges of joints to prevent accidental spillage of sealant on top surface and removing the tap after sealant is applied complete all as specified and directed. (v) The quoted unit rate deemed to be include supplying and fixing of back up rod /slab of appropiate diameter / thickness as per site requirement. (vi) Electric supply shall be arranged by the contractor at his own arrangements without any extra cost to government.

Ditto all as per Item No 3.00 here-in-before but for expansion joints.

M&L for preparation of old painted steel surfaces of any description and applying one coat of synthetic enamel paint of any colour complete all as specified and directed.

DHARM ENTERPRISES

DHEERENDRA PRAKASH GUPTA

BVV ENTERPRISES

A.B.Enterprises