CERTAIN MISC WORKS FOR EM INSTALLATIONS AT VARIOUS LOCATIONS UNDER AGE EM II OF GE 865 EWS

Amount

Supply, fixing, connecting and testing in replacement LED Flood Light suitable for working on 230 volts, 50 Hz, AC of 170 Watt Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65 flood light with high power LEDs as light source, suitable for highlighting architectural facade highmast and general purpose lighting incl connection of copper wire complete all as specified and directed.

Supply, fixing, connecting and testing in replacement LED Flood Light suitable for working on 230 volts, 50 Hz, AC of 210 Watt Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65 flood light with high power LEDs as light source, suitable for highlighting architectural facade highmast and general purpose lighting incl connection of copper wire complete all as specified and directed.

Supply, fixing, connecting and testing in replacement LED Flood Light suitable for working on 230 volts, 50 Hz, AC of 120 Watt Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65 flood light with high power LEDs as light source, suitable for highlighting architectural facade highmast and general purpose lighting incl connection of copper wire complete all as specified and directed.

Supply and fixing LED Solar street light fitting 24 Watt including galvanized steel pole in built, lithium ion battery, solar panel, charge controller with dusk down sensor complete all as spfd & directed

Supply & laying or fixing in replacement of 1100 volts grade duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape overall PVC sheathed solid conductor in service connections 4 Sqmm twin core flat/circular cable complete all as specified and directed.

All as per item No 5.00 above but 6 Sqmm 2 core. complete all as specified and directed.

All as per item No 5.00 above but 10 Sqmm 2 core. complete all as specified and directed.

All as per item No 5.00 above but 16 Sqmm 2 core. complete all as specified and directed.

S & F earth continuity conductor or main earthing lead buried in ground or fixed on installations/ poles for earthing etc of size 32 mm x 6 mm galvanised iron strip, including suitable clamps for fixing complete all as specified & directed.

S & F in replacement aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground. complete all as specified & directed.

S & F in replacement air termination, single pointed aluminium rod 12mm dia and 300mm long complete all as specified and directed.

Dismantling steel poles/struts, any size complete all as specified & as directed.

Supply, erecting and fixing in true vertical position Steel tubular swaged poles (9.0 metres long) complete with cast iron base plate, finial taper plug,bolts,nuts & screws as specified type 410 SP-31, complete all as specified. Note : - Earth work & PCC work will be measured & paid seprately under relavent item.

M&L for dismantling old unserviceable GOD and S&F Switch air break, gang operated triple pole mechanically operated (Vertical type) mounted on 9 insulator and steel frame, with operating mechanism worked from ground level, for current rating 200 Amps, working pressure 11000 volts, complete all as specified and directed

Dismantling for old unsv lighting arresters and S&F Lighting arresters expulsion type complete with all fittings, transmission class, discharge capacity 65 Kilo amps suitable for 11000 volts. complete all as specified and directed

Taking down unserviceable or burnt out MCCBs from existing LT Panel board duly disconnected all electrical connection & Supply and fixing MCCB 3 Pole, 415 V, fixed type, 25 to 100 Amps with breaking capacity 16 KA, complete all as specified and directed.

Dittto all as per item No 16 above but for 125 Amps,16 KA, 3P. complete all as specified and directed.

M&L in replacement MCCB 3 Pole, 415 V, with Microprocessor release 160 Amps with breaking capacity 36 KA rating with thermal relay. complete all as specified and directed.

All as per item No 18 but 250 Amps 25 KA rating with thermal relay complete all as specified and directed.

All as per item No 18 but 400 Amps 25 KA rating with thermal relay complete all as specified and directed.

All as per item No 18 but 630 Amps, 50 KA rating with thermal relay complete all as specified and directed.

M&L in replacement MCCB 3 Pole, 415 V, Adjustable type, 200Amps with breaking capacity 36 KA complete all as specified and directed.

Supply & fixing in replacement of OFF Load Change Change over ( Side Handel) switch 415 Volt in sheet metal inclosure 4 Pole of capacity 200 Amps with connecting acessories complete all as specified and directedby Engr in Charge.

Supply & fixing in replacement of OFF Load Change Change over ( Side Handel) switch 415 Volt in sheet metal inclosure 4 Pole of capacity 320 Amps with connecting acessories complete all as specified and directed by.

Supply & fixing in replacement of OFF Load Change Change over ( Side Handel) switch 415 Volt in sheet metal inclosure 4 Pole of capacity 400 Amps with connecting acessories complete all as specified and directed by .

Supply & fixing in replacement of OFF Load Change over ( Side Handle) switch 415 Volt in sheet metal inclosure 4 Pole of capacity 630 Amps with connecting acessories complete all as specified and directed

S & F (in repair) Timer Switch with sensor alongwith pre-down swiching off timer( nature switche),single phase inclusive of MCB 32 Amps, operating illumination level for switching ON should be less than 60 lux for 30 seconds and for switching off must be greater than 10 lux for 30 seconds, multiple option switch for automatic and manual operations, capable to handle lightning load up to 5 KW per phase, including Power contactor capacity 25 Amp conforms to IEC 60947-4-1, IS 13947-4-1 completely enclosed with plastic body panel conforming to IP 66 degree of protection complete all as specified and directed. Make : Kakatiya Energy systems Pvt Ltd, Model No SWADEEP- 02 EC 3KW1P or equivalent.

All as per item No-27 above but for three phase model 02EC5kW3P complete all as specified and directed.

S&F Timer switch with sensor alongwith pre-dawn switching off timer, 4-8 Hrs (nature switch) single phase, confirms to IP 64 degree of protection all as specified and directed. (Make- Kakatiya Energy Systems Ltd. Model No - Nature switch-02 or equivalent make.

M & L Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint all as specified and directed by engr-in-charge.

M&L for painting of chain link fencing and steel sections with two coats aluminum paint over a coat of aluminium red-oxide complete including preparatiuon of previously untreated surfaces all as specified and directed by engr-in-charge.

Supplying and laying synthetic Rubber insulated mats 20 mm thick for voltage upto 11 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m. complete all as specified and directed.

M & L for retro reflective with print with aluminium 3 mm thick sheet including fixing to wall or by means of frame work including rawl plug screws, nuts and writing of letters, arrows, dashesh, lines etc complete all as specified and as directed by Engineer in charge. Note: Matter will be provided by the dept.

M&L of Stainless steel pipe SS 304 of 40 mm dia, all as per specified and as directed.

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete. complete all as specified & directed.

M&L for day and night light vision board with 3 mm thick aluminium sheet covered in three sides and with wiring for sufficient lighting with switches etc incl fixing on wall with screw, nuts/ fastners and writing of letters and arrows, dashesh, line etc on acrylic sheet complete all is specified and as directed

Excavation in trenches, n.exc 1.5m wide & n.exc 1.5m in depth for foundation etc in Hard and Dence soil & getting out for laying of cable complete all as specified & directed.

All as per item No 1 above but additional 1.5 mtrs or part there of in depth beyond the first 1.5 m complete as specified & directed.

Removing of surplus excavated soil to a distance n.exe 50 Mtr and depositing where directed at a level n.exe 1.5 mtr above the starting point complete all as specified.

Returning filling in including spreading leveling watering & well ramming in layers n exc. 25cm Cum thick complete all as specified and directed.

Material & labour for PCC 1:4:8, type D2 ( using 40 mm graded stone aggregate) as in base for foundation of the pole, all as specified and directed.

Material & labour for Providing PCC 1:3:6, type C2 (using 40 mm graded stone aggregate) as in mass filling all as specified and directed.

Material & labour for providing PCC 1:2:4 type B1 (Using 20 mm graded stone aggregate) for plinth coping all as specified and directed.

S&F GI tubing 40mm dia "light grade" with all fittings, laid in trenches, fixed on pole/under road crossing or passing through gutters etc incl taking down old one, complete all as directed.

S&F GI tubing 50mm dia "light grade" with all fittings, laid in trenches, fixed on pole/under road crossing or passing through gutters etc incl taking down old one, complete all as directed.

S&F GI tubing 80mm dia "light grade" with all fittings, laid in trenches, fixed on pole/under road crossing or passing through gutters etc incl taking down old one, complete all as directed.

M&L in replacement for Earthing complete with galvanised steel earth plate electrode 60 cm X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to and inclduing GI Strip 32X6 mm as earthing lead, by means of bolts, nuts, check nuts and washers of galvanised iron all as shown in electrical plate No 5 of MES SSR Part I and testing on completion inclduing excavation and earth work in any type of soil, PCC (1:3:6) type C1 chamber, MS frame and cover 6 mm thick in cement concrete (1:2:4) type B1 reinforced with welded steel wire fabric or XPM (weight not less than 4 Kg per Sqm) with cast iron frame, funnel with wire mesh, GI watering pipe 20mm dia medium grade and lugs complete all as specified and directed.

All as per itme no: 47 above but 4 mm GI wire omplete all as specified & as directed.

national engineering (BID ID -3140298)

S S BUILDERS (BID ID -3140050)

M/s Devendera construction (BID ID -3139394)

Rajesh Agencies (BID ID -3139861)