Diprang Buraburi Road

Amount

Construction of embankment with materials obtained from borrowpits, with initial lead up to 3km, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2 (including land compensation of earth)

Construction of earthen shoulders & Subgrade with approved materials obtained from borrow pits with all lifts and leads, transporating to site, spreading, grading to required slope and compacting to meet required of table 300.2 (including compansation of earth)

Construction of granular sub-base by prevelling well gradeed material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achive the desired, conplete as per Technical Specification Clause.401 (ii) For Grading Material (Gr-II) GSB

Water Bound Macadam:- Providing, laying, spreading and compacting stone agreegates of specific size to WBM specification including spreading in uniform thickness, hand packing rolling with vibrator 80-100KN static roller in stages to proper grade and camber applying and brooming, requisite type of screening /binding materials to fill up the inter slices of coarse aggregate, watering and compacting to the required density Grading-II (B) By manual Means (c. using screening type-B) 11.2mm aggregate

Water Bound Macadam:- Providing, laying, spreading and compacting stone agreegates of specific size to WBM specification including spreading in uniform thickness, hand packing rolling with vibrator 80-100KN static roller in stages to proper grade and camber applying and brooming, requisite type of screening /binding materials to fill up the inter slices of coarse aggregate, watering and compacting to the required density Grading-III (B) By mechanical Means (c. using screening type-B)

Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90- 1.2 kg/sqm using mechanical means as per Technical Specification Clause 502.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510

Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. in ordinary soil, manual means

Plain cement concrete M10 (1:3:6) nominal mix) in levelling course below open foundation of Head walls as per drawingfs & technical specfication claquse 1109

Plain/Reinforced Cement Concrete in Sub-structure complete as per Drawing and Technical Specifications. C. RCC Grade M20, Case-I: Using Concrete mixer

Supplying, fitting and placing TMT (Fe-500 D) reinforcement bar (From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202

Providing and laying cement concrete wearing course M 30 grade including reinforcement complete as per drawing and technical specifications Clauses 800 and 1206.3, With crushed stone

Construction of R.C.C. railing of M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000 mm as per drawing and technical specifications Clauses 800, 900 and 1208.3

Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Table 1300.1, no fragment weighing less than 25 kg laid dry complete as per drawing and technical specifications Clause 1301

Arpana Deka

North East Plantations & Commercial Pvt Ltd

Gautam Bagaria