Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹37.2 LAccepted-AOC R O IQBAL MARKET AALI MAJID EIDGAH SRINAGAR KASHMIR | SRINAGAR | JAMMU AND KASHMIR | 190001 | L-1 | Accepted-AOC Being L-1 | |
| 2 | L-2₹38.5 L+₹32,868 (0.86%)Rejected-Finance | L-2 | Rejected-Finance Other than L-1 | |
| 3 | L-3₹40.5 L+₹2.4 L (6.25%)Rejected-Finance HOUSE NO 138 B HILL VIEW LANE NO 03 INDRA NAGAR SRINAGAR 190004 J K | SRINAGAR | JAMMU AND KASHMIR | 190004 | L-3 | Rejected-Finance Other than L-1 | |
| 4 | L-4₹40.9 L+₹2.7 L (7.13%)Rejected-Finance | L-4 | Rejected-Finance Other than L-1 | |
| 5 | L-5₹42.1 L+₹4.0 L (10.4%)Rejected-Finance | L-5 | Rejected-Finance Other than L-1 |
Tender Value
₹47.6 L
EMD Value
₹95,200
Closing Date
8 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Capt. Balakrishnan Chitnis, AGE EM, Offg. GE
GE 864 EWS, PIN-913864,C/o 56 APO
Spl repair to Bldg No P-530/03, P-530/05, P-534/01 and P-534/03 alongwith Garages and common area of Hawa Mahal, BB Cantt, Srinagar.
2023_MES_574388_1
864/WS-69/2022-23
Open Tender
Civil Works
Item Rate
270 days
B B Cantt.
AS PER TENDER
7 documents required · 7 mandatory
₹500
GE 864 EWS
₹95,200
Yes
27 Feb 2023
11 Jan 2023
10 Feb 2023
11 Jan 2023
8 Feb 2023
27 Jan 2023
Amount
Dismantling boarding/ linoleum sheet, any description, fixed in any position with nails complete all as specified and as directed.
Dismantling timber scantlings 40 sqcm and over in section, in any position framed work, complete all as specified and as directed.
S&F second class hard-wood in scantlings clean sawn, complete all as specified and directed by Engr-in-charge.
Description all as per srl item No 3.00 above but except timber scantling, complete all as specified and directed
Dismanting in fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section, complete all as specified and as directed.
Dismanting ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed.
Demolition of cement concrete (un reinforeced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) as in plinth protection / path/ hard standing/ floor etc. complete removal of debris out side of MD land.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete removal of debris out side MD land
M & L for 25 mm thick PCC B-0, 1:2:4 (12.5mm graded aggregate) as in floor base for tiles, complete all as specified and directed.
M&L for light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer 15 mm thick in CM (1:4), complete all as specified and directed.
M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile laid over and including screed bed or bedding layer 15 mm thick in CM (1:4), complete all as specified and directed.
M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm or 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm rendering in CM 1:3, complete all as specified and as directed.
Demolition of stone slabs and tiles of any description or thickness in floors aprons (laid, bedded and pointed in any mortar) etc. complete all as specified and as directed.
M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite over and including 15mm thick screed bed in CM (1:3), complete all as specified and directed.
Taking down cement plaster of any description on brick wall, concrete surface including mud plaster on brick of stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed.
Demolition of brick work or PCC solid block or stone/ boulder masonry built in cement mortar, complete all as specified and directed.
M & L for brick work sub class B old size brick straight or curved on plan exc 6m mean radius build in CM (1:6), complete all as specified and directed.
15 mm thick rendering in two layer (10mm + 5mm) on fair faces of brick /concrete on wall including facia chhajja etc.surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing Liquid water proofing compund in the proportion as mentioned in manufacturer's instructions complete all as specified and as directed by Engr-in-Charge. Note : Water proofing compund to be measured and paid for separately as supply only.
Supply only liquid water proofing compound, complete all as specified & directed. (Make : Dr Fixit, LW+, STP Ltd No 1 (L) & SIKA or equivalent as specified in PS)
M & L for Rendering 10mm thick on fair faces of brick work or concrete sur faces in CM (1:6) to be finished even and smooth without using extra cement, complete all as specified and directed.
Demolition reinforced cement concrete, (other than ground floors), shelves, chajjas, slabs and similar work carefully and matching to adjoining disturbed surfaces, complete all as specified and directed.
M&L for RCC 1:2:4 type B1 (20mm graded stone aggregate ) providing precast cement concrete in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face and setting in CM 1:4, complete all as specified and directed.
Dismantling water tanks exceeding 500 ltr but not exceeding 1000 ltr capacity and removing to store, complete all as specified and directed.
Taking down choukhat or frame with shutters ( without taking off shutters from the frames) not exceeding 1.5 sqm each, complete all as specified and directed.
Taking down choukhat or frame with shutters ( without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4.00 sqm each, complete all as specified and directed.
Taking down shutter of any description exceeding 1 sqm but not exceeding 2 sqm each, complete all as specified and directed.
M & L for 2nd class hard wood plain, solid, strainght, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.
S & F for 30mm thick flush shutters, solid core construction, with block board core and plywood both face panels, commercial type, complete all as specified and directed.
S & F for 30mm thick 1st class softwood glazed and skelton shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.20 (a), supplied and fitted to chowkats, complete all as specified and directed.
S & F for solid PVC Door frame of size 50mm x 47 mm made out of 5mm plain PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing, complete all as specified and directed.
S & F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples, complete all as specified and directed.
S&F for butt hinges 100mm heavy weight, cold rolled mild steel, complete all as specified and directed.
S&F for 150mm size aluminium handles, cast type anodised, complete all as specified and directed.
S&F for 200mm long, aluminium anodised barrel tower bolts of extruded section, complete all specified and directed.
S&F for 250mm long aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed.
S&F in repairs 20 mm dia aluminium anodised poweder coated decorative type curtain rods with fixing bracket, stoper,roller etc, complete all as specified and directed.
S&f for MS door spring with 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete as specified and directed.
M&L for Cutting holes in brick walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required exc half brick but not exc one brick all as specified and directed.
M&L for mild steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 completed as specified and directed
Providing 75 mm thick cement concrete 1:3:6 type C-2 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints through out the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed by Engr-in-Charge.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings omplete all as specified and as directed.
S&F for 0.63 mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275gm, complete all as specified and as directed.
S&F for 0.63 mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275gm, complete all as specified and as directed.
Applying two coat of synthetic enamel paint on new steel surface over one coat red oxide primer ,of any description not otherwise describe over 100mm width or girth, complete all as specified and directed.
S&F PVC flushing cistern, 10 ltr capacity low level, white, valve less syphonic action type, with inlet, ball valve, float and handle including bracktes, pvc 32 mm dia flushing pipe for cistren etc complete fixed in repairs complete all as specified and directed
S&F for Vitreous China wash basin, white, flat back, size 550x400mm excluding excluding taps, waste, chain and plug and porcelain stopper but including brackets fixing Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pip with Waste coupling of PTMT (half or full threaded) suitable for urinals, (Minimum eight 32mm-45gms)
S&F in repairs vitreous china squatting pan, Orissa pattern of size 580mm x 440mm white with including foot rests and including CI 'P' trap but excluding flushing cistern and flush pipe but including provision of PCC 1:4:8 type D-2 bedding, complete all as specified and directed.
S & F jet spray including CP flexible pipe for EWC fixed in repair, complete all as specified and as directed.
S&F chromium plated health faucet, telephonic type with CP flexible arms 1.0 mtr long, suitable to fixed to 15mm bore CP angle valves, complete all as specified and directed.
S&F vitreous chine wash down water closet (pedestal pattern) white, complete including connection to drain pipe and to flushing pipe, anti-syphonage pipe etc., complete all as specified and directed
S&F for CP towel rack size 58cmx22cmx13cm fixed in repair complete all as specified and directed.
S&F in repair centre hole CP mixer for mixing hot & cold water, suitable for wash hand basin, cast copper alloy with dual capstan head, chromium plated, fancy type, screwed down, high pressure with lettered Hot & Cold with long screwed shanks and fly nuts, screwed for iron pipe, suitable for 15mm bore, complete all as specified and directed by Engineer-in-Charge.
S&F single lever CP wall mixture with telephonic type 15mm bore, complete all as specified and directed by Engineer-in-Charge.
S&F in replacement CP shower rose, over head type, size 100x100mm, square in shape, single flow, complete all as specified and directed by Engineer-in-Charge.
S & F in repair 15mm Bib taps chromium plated fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed
S&F in replacement 15mm bore angle valve, cast copper alloy, chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for union, complete all as specified and directed by Engineer-in-Charge.
S &F Towel Rail 600mm long of CP Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms)
S&F in repair corner glass shelf 300mm x 300 mm (with brackets), complete all as specified and directed by Engineer-in-Charge.
S&F in replacement glass shelf assembly, consisting of 5.50mm thick sheet glass, 12cm wide with chromium plated brackets, guard and railing 60cm long, complete all as specified and directed by Engineer-in-Charge.
S&F for PVC connections 15mm size with PTMT nuts of length 450, complete all as specified and directed.
Description all as per Srl item No.61.00 above but 600 length.
S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to d warf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mmt complete all as specified and directed
S&F in repair sink CP mixer chromium plated fancy type Brass CP mixer for mixing hot & cold water screwed down for iron pipe with necessary extension nipple screwed for 15mm dia complete all as specified and as directed
S&F Lagging to pipes 20mm used in internal water supply or plumbing all round with, 25min thick bonded ineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842, incl chicken mesh wire netting 25 gauge, 20mm mesh and POP, complete all as specified and as directed
S&F Lagging to pipes 15mm used in internal water supply or plumbing all round with, 25min thick bonded ineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842, incl chicken mesh wire netting 25 gauge, 20mm mesh and POP, complete all as specified and as directed complete all as specified and as directed
S&F in repair plate rack of stainless steel of size 900mm x 750mm x 250 mm with steel shelves and hanging arrangments for utensil, complete all as specified and directed.
S&F for Powder Coating (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
S&F for powder coating of any colour (Thickness or powder coating not less than 50 micron) Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 75mm long (2 Nos.) suitable handle (1 No.) complete all as specified
S&F for Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.
S&F for 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.
S & F for in repair Gypsum Board 12mm thick size 600 x 600 in ceiling fixed with Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.
S&F in repairs 19-20 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed
S&F for 20x5mm wooden decorative moulding/ beading of fancy type, complete all as specified and directed
S&Ffor 30mm Continuous (piano) hinges, mild steel, bright finish or elec trogalvanised complete all as specified and directed
S&F for Brass knobs 35-40mm dia for cupboard and as approved by GE, complete all as specified and as directed.
S&F for 100 mm Brass handles, cast type, polished bright, complete all as specified and as directed.
S&F for IInd class HW 20mm thick boarding fixed with nails in shelves partition and shelves of built in cupboards,almirahs, almirahs book case, toilet boxes racks, pelmet and similar work plain one side with bult joints, complete all as specified and as directed.
S&F for IInd class HW plain fillets square rectangular or trangular in section clean sawn screwed with rails area sec exceeding 6 and not exceeding 13 Sqcm, complete all as specified and as directed.
M&L for TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.
Dismantling of cast iron or reinforced concrete drain pipes or PVC pipes , joints in cement mortar and taking our of treches, if required complete all as specifed and directed
S&F 100 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.
S&F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.
S&F 75 mm Stack clamps out of 50 mm by 5 mm MS flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and as directed.
S&F 100 mm Stack clamps out of 50 mm by 5 mm MS flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and as directed.
Rotational moulded polyethylene water storage tank , two layers, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in repair to position all as specified in SSR Part-I of Capacity 500 litres each including all accessories (i.e GI nipples and Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of bore 20mm/25mm (Minimum weight 210 gram) etc), complete all as specified and as directed by Engr-in-Charge.
M&L for complete removal of existing treatment including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots from old plastered or un plastered surfaces of walls and preparation of wall surfaces to receive next treatment complete all as specified and directed
M & L for applying wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.
M&L for Preparation of New plastered surfaces, and applying two coats of cement base paint over a coat of alkali resistant cement based priming paint complete all as specified and directed
M&L for Preparation of old plastered surfaces (by removing existing teratment), and applying two coats of cement base paint over a coat of alkali resistant cement based priming paint complete all as specified and directed
M&L for Preparing new surfaces plastered or unplastered distempering walls with 2 coat of distemper oil emulsion white or tinted over a coat of alkali resistant cement based priming paintcomplete all as specified and directed
M&L for Preparing old surfaces plastered or unplastered (by removing existing teratment), distempering walls with 2 coat of distemper oil emulsion white or tinted over a coat of alkali resistant cement based priming paint, complete all as specified and directed
Preparation of new wooden surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of pink primer complete all a specified and directed.
Taking up or down 15/20 mm steel tubing and connections, including cleaning for re fixing or removal to store
S&F GI tubing 15mm dia medium grade with all fittings and fixed to wall, floor and ceiling etc, complete all as specified and as directed.
S&F GI tubing 20mm dia medium grade with all fittings and fixed to wall, floor and ceiling etc, complete all as specified and as directed.
S & F 12 mm thick ply wood grade BWR type BB fixed with nails to timber frame work, complete all as per specified and directed.
S & F 9 mm thick ply wood, 5 Nos of ply, grade BWP, type BB fixed with screws to timber frame work complete all as per specified and directed.
S&F in repair chromium plated toilet paper holder fixed with brass screw, complete all as specified and directed.
S&F for hand shower (telephonic shower), chromium plated, with 900mm long 15mm bore chrome finish flexible pipe, fixed in repair complete all as specified and directed
Wooden laminated flooring of size 1200 x 200 x 6 to 8 mm thick having fire rating class B1 fixed above PVC sheet and cushion including 9mm thick plywood grade BWR type BB 5 Nos of ply fixed with nails to timer, beading and tee all as per manufactures instruction and dircetion fixed, complete all as specified and directed. Make:- Action Tesa, Pergo or equivalent.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets , light fittings etc. removing material for taking credit and making good distrubed surfaces to walls, floors etc complete all as specified and directed.
M&L for point wiring with single runs PVC insulated FRLS grade, 1100V grade cable with multistranded copper conductor of size 1.5 Sq. mm (Nominal area) (ISI Marked) drawn in and including PVC Casing capping /PVC conduit of suitable size with all fittings and accessories including PVC flush box/ Metal flush box/ sunken box of suitable size and drawing continuous earth wire of PVC insulated FRLS grade, unsheathed stranded copper conductor of size 1.5 Sqmm(ISI Marked) terminated the box for following type of point wiring including making good disturbed of wall completed all as directed by Engineer-in- Charge.
One light point or one fan point controlled by one switch SP 230 Volts
One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent bd.
One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.
One bell point controlled by one switch
Description all as per item No 104 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 2.5 sqmm green solid copper conductor cable as continuous earth wire with lugs complete all as specified and directed.
S & F Modular Bell push 6A,1way, 1module with white cover plate and frame, complete all as specified and directed.
Supply and fixing switch modular 6 Amps 230 Volts 1module with white cover plate and frameone way switch.
S&F Switch modular type AC 230 volts 16/20 Amps one way with white cover plate and frame complete all as specified and as directed.
S&F socket modular 6 Amps AC 230 Volts 2/3 pin combined with white cover plate and frame complete all as specified and as directed.
S&F socket modular 6A/16 Amps-2/3 pin combined AC 230 Volts with white cover plate and frame complete all as specified and as directed.
S&F for modular fan regulator step type 120 watts with white cover plate and frame complete all as spd and directed complete all as spd and directed.
S & F Ceiling rose three terminals polycarbonate , isolated body complete all as specified and directed.
S&F Bell Ding Dong Type, AC 230 volt, Single Pole
S & F LED light fitting fixture 20W, 6500K, 2000 lm decorative ultra slim with co extruded channel in thermally conductive material with plastic housing, heat sink, environmental friendly having power factor >0.95, surge protection 2.5KV energy efficient ready to use complete all as specified.
S&F exhaust fan steel body AC single Phase 230 volt of size 300mm sweep with blades and frame and louvers complete all as specified and directed.
Supply & fix ventilating fan made out of high quality engineering plastic, resistant to colour change with anti static properties, 200mm sweep suitable to work on 230 Volts 50 Hz, 1200 RPM, coper winding compete all as specified and directed.
S & F LED Mirror light fitting 2 feet 10 W 6500K decorative ultra slim linear LED lighting fixture with extruded AL. heat sink, environmental friendly, energy efficient, complete all as specified and directed.
S&F decorative wall mounting chrome finish 3/5 watt LED fixture 6000K complete all as specified and directed by Engr-in-Charge.
S&F in replacement 10 Watt, 6000 K LED bulk head luminaire with opal diffuser etc. complete with accessories, complete all as specified and directed.
S&F post top lantern LED type 20 watt 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as spd and directed.
M & L Sub main wiring with two runs of 10.0 Sqmm FRLS grade, (ISI mark) PVC insulated, multi stranded, unsheathed, copper conductor and two runs of, PVC insulated multistranded FRLS, grade (ISI mark) unsheathed copper conductor of size 10.0 Sqmm green colour as earth lead including PVC casing capping of suitable size, complete all as specified and directed, including taking down old unservicable one.
S & F distribution board iron clad, double door with IP-43 1K-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link confirming to cat pt No DBVTL004DD of L&T or equivalent of make Legrand / Schnider complete with one MCCB 4 pole 415 Volts 100 Amps rating with rupturing cap 25 KA and 12 Nos MCB SP 63 Amps 'C' Curve of the same make as of distribution board & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge.
S&F MCB DB 8 way, 230 volt, sheet metal enclosure for MCB's, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified.
S&F MCB DB 4 way, 230 volt, sheet metal enclosure for MCB's, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified.
S&F MCB SPN 40 to 63 Amps, 240 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity complete all as specified.
S&F MCB SP 6 to 32 Amps, 240 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity complete all as specified.
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1,5 mtrs in depth for laying of cables including getting out in any kind of soil complete all as specified and directed. (cable shall be laid 60 cm below ground level )
Returning filling in including spreading, leveling ,and well ramming, in layers not exceeding 25 cm each layer of any kind of soil.
Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point.
Dry coarse sand as cushioning to under ground cable provided with layer of 8 cms deep before laying the cable and 15 cms deep after laying and stretching the cable, punned to 18 cm thick complete all as specified and as directed. Note:- Only punned thickness shall be measured for payment purpose.
Brick covering with width equal to length of brick as mechanical protection to cable using sub class ‘B’ bricks laid flat of size 230mmx115mmx75mm complete all as specified and as directed by Engr-in-Charge.
Material and labour for replacement of GI tubing light grade 40 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed .
Supply and laying of cable XLPE insulated armoured heavy duty electric cable with aluminium counductor, 1100 volts grade of crosssectional area 4 Sqmm x 2 Core, complete all as specified and directed .
Supply and laying of cable XLPE insulated armoured heavy duty electric cable with aluminium counductor, 1100 volts grade of crosssectional area 6 Sqmm x 2 Core, complete all as specified and directed .
Supply and laying of cable XLPE insulated armoured heavy duty electric cable with aluminium counductor, 1100 volts grade of crosssectional area 10 Sqmm x 2 Core, complete all as specified and directed .
Supply and fixing LED street light fitting 45 Watt with lense, toughned glass, IP 66 protection 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant with impact and corrosion resistant complete with bracket for fixing of fitting complete all as specified and directed.
Material and labour for earthing, complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (Earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connecting to the galvanised iron earth lead wire of 4mm dia by means of bolts, nuts, check nuts and washers of galavanised iron and earth strip protected by provision of GI light grade pipe 20mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and with 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate common salt and charcoal filling test point made out of 40mm/6mm flat iron with fixing arrangement funnel wire mesh and earth work in hard dense soil returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electrical plate No 03 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion.
M/S DFA Enterprises
M/S Vivek Gupta and Co
M/S TAJ DIN KHARI
M/S Ghulam Mohammad Shalla
Alishan Builders
M/S AKMAL CONSTRUCTIONS
M/S SHAH CONSTRUCTION COMPANY
M/s Lal Enterprises
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .