REPAIRS/ REPLACEMENT OF LIFT CONTROL PANEL, ARD SYSTEM, DRIVE ASSEMBLY AND OTHER MISC ITEMS FOR JOHNSON MAKE LIFT OF JCOs/ ORs MD ACCN AT PIRU VIHAR UNDER GE(U) PM DELHI CANTT-10.

Amount

Taking down/out unserviceable control panel and Supply, installations, commissioning and testing of of MICRO PROCESSOR and latest technology based controller SP3 panel along with travelling cable, OSG assembly and complete shaft harness, all necessary wiring and all connected accessories for VVVF drive of 11 KW, 380/480 volts, 50 Hz as per sample suitable for 13 passengers lift (make of lift M/s Johnson Lifts Pvt. Ltd.) of serving Ground + Eight Floors (total Nine Landings) with electric power operated doors and comprising with following complete all as specified and as directed. (Make:- As per OEM recommendation). (i) Automatic call register and execution system. (ii) Automatic attendant system. (iii) Automatic closure of fan independent if the lift is not in operation for more than 45 seconds. (iv) Over load/ low voltage/ single phase protections. (v) Make of drive:- Yaskawa/ Emerson/ Fuji. (vi) Automatic phase reversal system. (vii) AC 3 phase 415 volts VVVF door drive of suitable capacity 2 HP for door operating system with wiring complete. (viii) Cooling fan for air circulation in controller. (ix) Includeing COP, read switch, limit switch and decoder etc. with wiring. (x) Hooter with battery fixed at ground floor with proper wiring with control panel in all blocks. (xi) Arrangement of Fire main switch at ground floor with wiring complete.

NOTES for item No. 1.00:- (a) The Controller should compatible to run the lift G+ Eight floors (total nine landings) having cooling fan and sufficient space for VVVF drive. (b) Main VVVF drive should be provide with calibration pad & proper mounting in controller alongwith any other connectection as required. (c) Any other arrangement/ alteration for smooth functioning of lifts should be done by contractor with out any extra cost. (d) The control wiring shall be secured & confirmed to standard wiring practice & it should be proper fixing on wall/ in duct cover with clamping, saddling, etc. complete. (e) The controller shall be required to connect, transfer & interrupt power supply & protect the motor against over load. (f) During the execution of work any civil/ cement work done by contractor with own arrangement and no extra cost.

Supply, fixing, testing and commissioning ARD 2.5KVA (Automatic Rescue Device) with panel and including necessary internal wiring work, suitable for 13 passenger Lifts (make of lift M/s Johnson Lifts Pvt. Ltd.) including ARD batteries of capacity 12V, 17AH - 04 Nos. including taking down old unserviceable ARD complete all as specified and directed by Engr-in-Charge. (Make of ARD:- As per OEM recommendation).(Make of battary:- EXIDE/ AMARON/ STANDARD FURKKAVA) .

Supply, installations, commissioning and testing of IR door beam sensor 12V/ 0.2A with 20 Nos of diodes, pattern of cri-cross beams meeting the requirements of EN 81-20 with IP-65 ratings and housed in slim aluminium profile alongwith all fixing accessories suitable for 13 passengers lift (make of lift M/s Johnson Lifts Pvt. Ltd.) including taking down old unserviceable one complete all as specified and directed. (Make:- As per OEM recommendation).

Supply, installation,commissioning & testing of full SS Cabin Operated Panel (COP) with push box along with all connected accessories complete suitable for 13 Passenger lifts (make of lift M/s Johnson Lifts Pvt. Ltd.) serving Ground + Eight (Total Nine landings) including taking down old unserviceable one complete all as specified and directed. (Make:- As per OEM recommendation).

Supply, installation,commissioning & testing of full Landing Operating Panel (LOP) with latest Braille push botton along with all connected accessories complete suitable for 13 Passenger lifts (make of lift M/s Johnson Lifts Pvt. Ltd.) serving Ground + Eight (Total Nine landings) including taking down old unserviceable one complete all as specified and directed. (Make:- As per OEM recommendation).

Supply, installations, commissioning and testing of POD Door accessories {Door Roller (U & V Roller/ Bearing) , CW shoe liner, gate lock etc.} alongwith all fixing accessories suitable for 13 passengers lift (make of lift M/s Johnson Lifts Pvt. Ltd.) including taking down old unserviceable one complete all as specified and directed. (Make:- As per OEM recommendation).

Taking down/out unserviceable control panel and Supply, installations, commissioning and testing of of MICRO PROCESSOR and latest technology based controller SP3 panel along with travelling cable, OSG assembly and complete shaft harness, all necessary wiring and all connected accessories for VVVF drive of 7.5 KW, 380/480 volts, 50 Hz as per sample suitable for 08 passengers lift (make of lift M/s Johnson Lifts Pvt. Ltd.) of serving Ground + Eight Floors (total Nine Landings) with electric power operated doors and comprising with following complete all as specified and as directed. (Make:- As per OEM recommendation). (i) Automatic call register and execution system. (ii) Automatic attendant system. (iii) Automatic closure of fan independent if the lift is not in operation for more than 45 seconds. (iv) Over load/ low voltage/ single phase protections. (v) Make of drive:- Yaskawa/ Emerson/ Fuji. (vi) Automatic phase reversal system. (vii) AC 3 phase 415 volts VVVF door drive of suitable capacity 2 HP for door operating system with wiring complete. (viii) Cooling fan for air circulation in controller. (ix) Includeing COP, read switch, limit switch and decoder etc. with wiring. (x) Hooter with battery fixed at ground floor with proper wiring with control panel in all blocks. (xi) Arrangement of Fire main switch at ground floor with wiring complete.

NOTES for item No. 7.00:- (a) The Controller should compatible to run the lift G+ Eight floors (total nine landings) having cooling fan and sufficient space for VVVF drive. (b) Main VVVF drive should be provide with calibration pad & proper mounting in controller alongwith any other connectection as required. (c) Any other arrangement/ alteration for smooth functioning of lifts should be done by contractor with out any extra cost. (d) The control wiring shall be secured & confirmed to standard wiring practice & it should be proper fixing on wall/ in duct cover with clamping, saddling, etc. complete. (e) The controller shall be required to connect, transfer & interrupt power supply & protect the motor against over load. (f) During the execution of work any civil/ cement work done by contractor with own arrangement and no extra cost.

Supply, fixing, testing and commissioning ARD 1.5KVA (Automatic Rescue Device) with panel and including necessary internal wiring work, suitable for 08 passenger Lifts (make of lift M/s Johnson Lifts Pvt. Ltd.) including ARD batteries of capacity 12V, 7AH - 04 Nos. including taking down old unserviceable ARD complete all as specified and directed by Engr-in-Charge. (Make of ARD:- As per OEM recommendation).(Make of battary:- EXIDE/ AMARON/ STANDARD FURKKAVA) .

Supply, installation,commissioning & testing of door screen sensor full set along with all connected accessories complete suitable for 08 Passenger lifts (make of lift M/s Johnson Lifts Pvt. Ltd.) serving Ground + Eight (Total Nine landings) including taking down old unserviceable one complete all as specified and directed. (Make:- As per OEM recommendation).

Supply, installation,commissioning & testing of full SS Cabin Operated Panel (COP) with push box along with all connected accessories complete suitable for 08 Passenger lifts (make of lift M/s Johnson Lifts Pvt. Ltd.) serving Ground + Eight (Total Nine landings) including taking down old unserviceable one complete all as specified and directed. (Make:- As per OEM recommendation).

Supply, installation,commissioning & testing of full Landing Operating Panel (LOP) with latest Braille push botton along with all connected accessories complete suitable for 08 Passenger lifts (make of lift M/s Johnson Lifts Pvt. Ltd.) serving Ground + Eight (Total Nine landings) including taking down old unserviceable one complete all as specified and directed. (Make:- As per OEM recommendation).

Supply, installations, commissioning and testing of POD Door accessories {Door Roller (U & V Roller/ Bearing) , CW shoe liner, gate lock etc.} alongwith all fixing accessories suitable for 08 passengers lift (make of lift M/s Johnson Lifts Pvt. Ltd.) including taking down old unserviceable one complete all as specified and directed. (Make:- As per OEM recommendation).

Supply, installation,commissioning & testing of OSG unit including OSG wheel, rope, auto limit, etc., along with all connected accessories complete suitable for 08/13 Passenger lifts (make of lift M/s Johnson Lifts Pvt. Ltd.) serving Ground + Eight (Total Nine landings) including taking down old unserviceable one complete all as specified and directed. (Make:- As per OEM recommendation).

Dismantling/ taking down existing worn out door without causing any damaged to door sensor and supply, fixing commissioning and testing of complete car door, suitable to existing lift SS hairline/ Honeycomb finish metal sheet minimum 1.25mm thickness SS sheet standard 304 and scratch resistant and complete door operator assembly system (i.e. door motor, door drive air card) and car sill for smooth opening of car doors suitable for 13 passenger lift (make of lift M/s Johnson Lifts Pvt. Ltd.) width of centre opening 900mm, height of opening 2000mm, two way centre opening, 2 hours fire rating with gate lock, door shoe and other all fittings and refixing of taking down door sensor as per site requirement complete all as specified and directed by Engr-in-Charge. (Make:- As per OEM recomendation) NOTE:- (i) Rate quoted by the contractor are deemed to be inclusive of minor spares such as gate lock, door rollers, skates, door shoe, door rope, etc. (ii) Any damaged done by the contractor shall be replace with same make and model of the door sensor while taking down and rectify the same free of cost by the contractor.)

Dismantaling/Taking down old unserviceable landing door and Supply , fixing, testing and commossioning of complete Landing door, SS hairline/ Honeycomb finish metal sheet (18 gauge approx) 1.2 mm thickness SS sheet standard 304 scratch resistance including complete door header assy (i.e door hanger roller) and landing sill suitable for 13 Passenger lift (make of lift M/s Johnson Lifts Pvt. Ltd.), width of centre opening 900mm, height of opening 2000mm, two way centre opening, 2 hours fire rating with gate lock, door shoe and other all fittings as per site requirement complete all as specified and directed by Engr-in-Charge. (Make:- As per OEM recomendation) NOTE:- (i) Rate quoted by the contractor are deemed to be inclusive of minor spares such as gate lock, door rollers, skates, door shoe, door rope, etc. and any other civil work required at site for taking out/old door assy and fixing new door assy and making good disturbed surfaces complete as per direction. (ii) Any damaged done by the contractor shall be replace with same make and model of the door sensor while taking down and rectify the same free of cost by the contractor.)

Dismantling/Taking down old unserviceable Car door and supply, fixing, testing and commissioning of complete Car door SS hairline/ Honeycomb finish metal sheet (18 gauge approx) 1.25 mm thickness SS Sheet standard 304 and scratch resistant & complete door operator assembly system (i.e door motor, door drive, air card) and car sill for smooth opening of Car doors suitable for 08 passenger lift (make of lift M/s Johnson Lifts Pvt. Ltd.), width of centre opening 800mm, height of opening 2000mm, two way centre opening, 2 hours fire rating with gate lock, door shoe and other all fittings as per site requirement complete all as specified and directed by Engr-in-Charge. (Make:- As per OEM recomendation) NOTE:- (i) Rate quoted by the contractor are deemed to be inclusive of minor spares such as gate lock, door rollers, skates, door shoe, door rope, etc. and any other civil work required at site for taking out/old door assy and fixing new door assy and making good disturbed surfaces complete as per direction. (ii) Any damaged done by the contractor shall be replace with same make and model of the door sensor while taking down and rectify the same free of cost by the contractor.)

Dismantaling/Taking down old unserviceable landing door and Supply , fixing, testing and commossioning of complete Landing door, SS hairline/ Honeycomb finish metal sheet (18 gauge approx) 1.2 mm thickness SS sheet standard 304 scratch resistance including complete door header assy (i.e door hanger roller) and landing sill suitable for 08 Passenger lift (make of lift M/s Johnson Lifts Pvt. Ltd.), width of centre opening 800mm, height of opening 2000mm, two way centre opening, 2 hours fire rating with gate lock, door shoe and other all fittings as per site requirement complete all as specified and directed by Engr-in-Charge. (Make:- As per OEM recomendation) NOTE:- (i) Rate quoted by the contractor are deemed to be inclusive of minor spares such as gate lock, door rollers, skates, door shoe, door rope, etc. and any other civil work required at site for taking out/old door assy and fixing new door assy and making good disturbed surfaces complete as per direction. (ii) Any damaged done by the contractor shall be replace with same make and model of the door sensor while taking down and rectify the same free of cost by the contractor.)

Supply & fixing MS landing door frame 800mm opening and 3mm thick as per sample suitable for 08 passenger lifts (make of lift M/s Johnson Lifts Pvt. Ltd.) including taking down old unserviceable landing doors and complete all as specified and directed. (Make:- As per OEM recomendation)

Supply & fixing MS landing door frame 900mm opening and 3mm thick as per sample suitable for 13 passenger lifts (make of lift M/s Johnson Lifts Pvt. Ltd.) including taking down old unserviceable landing doors and complete all as specified and directed. (Make:- As per OEM recomendation)

Supply & fixing Valance plate assembly (Door Header) suitable for 08/13 passenger lifts (make of lift M/s Johnson Lifts Pvt. Ltd.) including taking down old unserviceable one complete all as specified and directed. (Make:- As per OEM recomendation)

Supply & fixing MS Guide rail bracket including nuts, bolts, washers with necessary drilling, grouting of bolts and necessary cement work as per required at site suitable for 08 passenger lifts (make of lift M/s Johnson Lifts Pvt. Ltd.) including taking down old unserviceable one complete all as specified and directed. (Make:- As per OEM recomendation)

Supply & fixing MS Guide rail bracket including nuts, bolts, washers with necessary drilling, grouting of bolts and necessary cement work as per required at site suitable for 13 passenger lifts (make of lift M/s Johnson Lifts Pvt. Ltd.) including taking down old unserviceable one complete all as specified and directed. (Make:- As per OEM recomendation)

Supply & fixing aluminium car door sill for (Size :- 1700mm x 50mm x 30mm thick as per sample suitable for 13/08 passenger lifts of make M/s Johnson Lifts Pvt. Ltd. including taking diown old uncerviceable car door Sill complete all as specified and directed. (Make:- As per OEM recommendation)

Supply & fixing aluminium landing door sill for (Size :- 1700mm x 50mm x 30mm thick as per sample suitable for 13/08 passenger lifts of make M/s Johnson Lifts Pvt. Ltd. including taking diown old uncerviceable landing door Sill complete all as specified and directed. (Make:- As per OEM recommendation)

Notes :- (i) The work shall be done throuhg OEM of existing lifts i.e. of M/s Johnson Lifts Pvt Ltd (ii) The contractor will have to submit MOU on stamp paper of Rs 100/- duly notarized, as per specified Performa given on page No 96 & 97 from OEM of existing lifts i.e of M/s Johnson Lifts Pvt Ltd. within Twenty Eight days from date of Acceptance of tender, failing which the contract will be liable to be cancelled and further action to be taken as per policy in vogue of the contractors default.

CH. Ram Chander

M/s Adhikari construction co.