GE (N) P/TOKEN- 78 OF 2022-2023 REPAIRS TO ROOF TREATMENT, SUNKEN FLOOR AND WALL SEEPAGE AND ALL OTHER CONNECTED MISC ITEMS ETC IN THE AREA OF AGE B/R (EAST) UNDER GE (N) PUNE

Amount

Complete removal of existing water proofing treatment of any thickness and cement mortar screed in existing roof including scrapping out old treatment/ bitumen etc. The roof surface shall be thoroughly wire brushed, cleaned to eliminate all sharp projections, washed, dried up and cleaned of all foreign material and dust to receive new water proofing treatment and removal of rubbish off the premises to a distance exc. 500m and not exc 1.5 Km complete all asper specified and as directed.

Demolition of cement concrete of any description and in any position not therwise specifically provided for complete all asper specified and as directed.

Material and labour for PCC (1:2:4) type B-0 (using 12.5mm graded broken stone aggregate) averaging 50mm thick as in leveling course on roof slab including finishing the surface of concrete even and fair to receive screed complete all as specified and as directed.

Material and labour for water proofing treatment to RCC roof slab complete all as specified below and as directed by Engineer-in-Charge including testing :-(a) 10mm thick rendering in cement mortar (1:3) mixed with and including integral water proofing compound @ 3% by weight of cement on roof slab finished even and fair complete (b) On the dried plastered surface, one coat of approved bituminous primer @ 0.70Kg/Sqm shall be applied. (c) On this primered surface, APP modified bituminous memberance 3mm thick with non woven polyster mat as reinforcement weighing not less than 3.60 Kg/Sqm with plain finish shall be laid by torch application method (d) Apply two coat of bituminous aluminium paint @ 0.15 Kg/Sqm. (e) The overlap while torching shall be 100mm at the longitudinal edges and 150mm at the ends. (f) The treatment shall be carried as per manufacturer instructions through authorised applicator. Note: Temporary arrangement has to be made for supply of water during roof treatment work.

Dismantling water tanks exc. 500 litres of capacity and not exc.1000 litres capacity and removing to store complete all asper specified and as directed.

Dismantling water tanks exc. 250 litres of capacity and not exc.500 litres capacity and removing to store complete all asper specified and as directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale, dirt etc from tanks, mouths of circulating pipes for capacity of tank exc.500 litres and n.exc. 1000 litres complete all as directed

All as per serial item No.7.00 here-in-before but for tank capacity exc.250 litres and n.exc. 500 litres complete all asper specified and as directed.

Supply and fix, rotational moulded polythelene water storage tanks 3 layer white colour water tank non toxic effect,algea formation protection (made from virgin grade of polyethylene material which is duly stablized with anti-oxident plastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top),the internal and external surfaces of tanks are smooth,clean and free from any hidden internal defects, hoisted and fixed in postion including S & F necessary GI fittings,inlet/outlet washout,overflow pieces long nipples,checknuts & washer,20mm dia PTMT valves igh pressure of PTMT with epoxy coated aluminum rod & high density plastic ball and 20 mm brass stop cock etc.complete all as specified and as directed.

Supply and fix, rotational moulded polythelene water storage tanks 3 layer white colour water tank non toxic effect,algea formation protection (made from virgin grade of polyethylene material which is duly stablized with anti-oxident plastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top),the internal and external surfaces of tanks are smooth,clean and free from any hidden internal defects, hoisted and fixed in postion including S & F necessary GI fittings,inlet/outlet washout,overflow pieces long nipples,checknuts & washer,20mm dia PTMT valves igh pressure of PTMT with epoxy coated aluminum rod & high density plastic ball and 20 mm brass stop cock etc.complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all asper specified and as directed.

Taking up or down 20 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as per specified and as directed.

Taking up or down 25 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all asper specified and as directed.

Supply and fix for 15 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Supply and fix for 20 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Supply and fix for 25 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Refixing 15mm dia old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) complete all asper specified and as directed.

Refixing 20mm dia old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) complete all as per specified and as directed.

Refixing 25mm dia old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) complete all as per specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 110mm dia single socketed with rubber ring joints/ adhesive fixed to walls with PVC clamps incl taking down pipe of any type (AC/Iron/PVC) complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 75mm dia single socketed with rubber ring joints/ adhesive fixed to walls with PVC clamps incl taking down pipe of any type (AC/Iron/PVC) complete all as specified and as directed.

Removing of vegetation / plantation on the wall/ roof/ any position of up to double storey building including necessary scaffolding upto 6 m height and roots superfacial area n.exc 2 sqm each and making good of surface by applying chemical treatment with GLYPHOSATE 41% including removing /refixing of CI/GI pipe lines complete.(Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately)

Supply and fix in repair PVC (SWR) bends any radius of 110mm dia with oval and access door complete all as specified and as directed.

Supply and fix in repair PVC (SWR) bends any radius of 75mm dia with oval and access door complete all as specified and as directed.

Material and labour for making hole and fixing the metalic packer for hydrophobic PU foam and sealer without disturbing existing structure as per manufacturer's instructions and forming agent like coreseal 357A/ core seal 357 CAT for carrying out non destructive water proofing treatment of sunken portion slab, floors and walls of bathroom, WC WHB and floor traps (combined unit) by using construction chemical methods such as hydrophobic PU grouting, epoxy coatings etc. including cleaning of surfaces with wire brush, detecting the sources of leakage and repairing, removing/ taking down unsound treatment/ surfaces and followed by material and labour for second course injection of resin like coreseal 135A/ 135B without disturbing existing structure complete all as per manufacturer's instructions and as directed by Engr-in-Charge. Make:Buildcore chemicals/ Pidilite/ Chemistic/ Fosrock as approved.

Material and labour for cleaning carefully the existing ceramic tiles with tile cleaner with jet, washing with jet water, scratching and cleaning the joint and filling the same with epoxy tile grout of white/ matching colour, curing complete all as specified and as directed. Make: STP, Asian paint, Berger paint, Pidilite, Fosrock

Material and labour for opening the fittings like Y bend, T etc. from the outlet pipe, fills properly the loose joint between bend and out let pipe with solvent and fixing properly to ensure leakage free joint and plastering the hole of size of 50/75/110mm including taking out old unserviceable PVC/ CI fittings complete all asper specified and as directed.

M & L for preparation of external surfaces of walls and appying two coats of chemical water proofing treatment on wall and chajja terrace and parapet walls, grooves etc. such as , CEMISTIK PU 50 heavy Duty watererproofing coating or equivalent complete all asper specified and as manufacturer instruction as directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L non-skid coloured ceramic tiles 7 to 8mm thick joint free (square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:6 complete all asper specified and as directed.

M&L glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:3 complete all asper specified and as directed. Make : Kajaria /NITCO/Johnson.

M & L Water proofing treatment to sunken slab, walls, etc, shall be carried out as specified below and as directed by Engineer-in-Charge. (a) Clean the sunken portion of toilet/Baths/WCs/Kitchen thoroughly remove laitance, dirt, dust etc. (b) Form angle fillet of size 40 mm x 40 mm along the junction of wall and floor using polymer modified mortar (“ Dr fixit” Pidicrete URP” or eqvt). (c) Sanitary pipes entering through walls and floor shall be sealed with “Dr Fixit Bathseal Tape” and the gaps to be grouted with non-shrink cementitous grout “Dr Fixit Bathseal Grout” or eqvt. Nahani traps etc to be fitted securely and the gaps around it to be grounted in the same manner. (d) Apply one coat of a Bitumen-modified polymer coating “Dr Fixit Bathseal Plus” or eqvt on all angle fillets by brush and cover it with 100mm open woven mesh when it is still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely. (e) In the remaining area, in dry substrate condition brush apply first coat of the same coating and further apply second coat when first is dry. Extend the coating upto 150mm above the FFI. Above FFI, another cementitious waterproofing waterproof coating “Dr Fixit Pidifin 2 K” or eqvt can be further applied right upto 2.1 m to waterproof the shower area also, if it is a bathroom or bath cubicles of a sanitary annex and pply second coat after 6-8 hoours and allow to dry completely. (f) After 2 to 3 days, sunken portion must be overlaid with a 50 mm thick concrete screed 1:3:6 type B0 mixed with integral WPC (Liquid) laid to slope 1:60 towards outer face of wall. Provide 40 mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 1:5:10 type E2. (g) After completing plumbing work in the toilet/WC/Bath/Kitchen floor, tiling work (floor and dado) can be carried out using suitable Tile Adhesives and ready to make tile grouts of appd makes such as Dr Fixit, FOSROC SIKA, MC BUCHEMIE, ROFF, etc.

M&L for providing cement concrete 1:5:10, typ E2, (using 20mm graded stone aggregate) in mass concrete, sub base, filling sunken floor and similar items complete all as specified and directed.

M&L cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth complete all asper specified and as directed.

S&F in repairs Vitreous China wash down water closet pan (pedestel pattern) ETWC white, including trap connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC jet for Pedestal pattern pan and plastic water closet seat of white in colour, back closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete all asper specified and as directed. Make : Cera/Prayag/Johnson Pedder.

S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including long Arm P-trap (CI) 100 mm dia of lenght up to 700 mm or as per site requirement ,complete including making good to floor complete all asper specified and as directed. Make : Cera/Prayag/Johnson Pedder.

S&F in repair dual flush 5&10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified. Make : Cera/Prayag/Johnson Pedder.

Supply and fix in repairs for vitreous china wash hand basin, white, size 550 mm x 400 mm flat back excluding taps but including CI brackets, chromium plated brass waste coupling, chain and plug, waste fittings, union and PVC waste pipe 32mm dia, of required length, cutting for and pinning in ends of bracket or errecting stand complete all as specified and as directed.

S&F in repair 15mm dia brass chromium plated fancy type, pillar tap with extension body with fly nuts capstan head screwed down high pressure with or Without lettered hot or cold with long scewed shank complete all asper specified and as directed. Make: Jaquar Cat No.VGP-81021N or equivalent

S&F in repair PVC connection 15mm bore size with PTMT nuts and washers of length 450mm complete all as specified and as directed. Make : Prayag/Polytuff.

S&F in repairs hand shower (health faucet) of ABS body with 1.0m long easy flexible tube in chrome finish and wall hook complete all as specified and directed by Engr-in-charge. Make : Jaquar Cat No ALE-ESS-585 or of equivalent make as per Appx 'A' as approved by GE

S & F in repair brass Chromium plated soap dish , fixed to wall with CP brass screws complete all asper specified and as directed. Make: Johnson Fusion series Cat part No: T3252C or of equivalent make as per Appx 'A' as approved by GE

S & F in repair Brass Chromium plated towel rail all as specified and directed. Make: Johnson Fusion series Cat part No: T1350C or of equivalent make as per Appx 'A' as approved by GE

S&F in repair Brass Chromium plated towel ring all as specified and directed. Make: Johnson Fusion series Cat part No: T1351C or of equivalent make as per Appx 'A' as approved by GE

S&F in repairs Bib Cock long nose quarter turn suitable for 15mm bore pipe long body with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified. Johnson VIVA new series Cat part No: T4806C or of equivalent make as per Appx 'A' as approved by GE

S&F in repairs wall mixer brass chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make: Jaquar Cat Part No FUS- 29273UPR FUSION SERIES or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair angle cock with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified. Make: Johnson Eco Cat part No: T3910C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs Two Way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete all as specified. Make Johnson VIVA new series Cat part No: T4808C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair cast copper alloy CP shower arm square 230mm long with flange complete all as specified and directed by Engr-in-charge. Make : Johnson Cat part No: S0001C1 or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair brass chromium plated shower rose 115mm size square (without arm) with swivel joints including fixing arm/ pipe all as specified. Make Johnson Cat part No: S0006C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair Toilet paper holder of stainless steel, all as specified and directed. Make: Johnson Fusion series Cat part No: T3254C or equivalent as approved by the GE.

S&F in repair 75mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate complete all as specified.

Dismantling plain or corrugated steel sheeting , any gauge, thickness including Nainital or similar pattern roof coverings complete all as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws with two corrugation side lap complete all as specified and as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling timber scantling in fillets, rails, rafter, purlins etc, under 40 Sqcm in section, unframed work complete all asper specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Supply and fix for mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 as in batterns for roofs complete all as specified and as directed.

Supply and fix for rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming Fe 410-W(Gde-E-250) quality -B complete all as specified and as directed.

Supply and fix for rolled mild steel frame work as in grills, doors or gates of angle or other sectioin with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings also fastenings and fixing etc. conforming Fe 290-W(Gde-E-165) quality -B complete all as specified and as directed.

Material and labour for mild steel Fe 410-W(Gde-E-250) quality-B in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and as directed.

S &F in repair Stainless steel wire cloth ISI marked, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples at any height all as specified & directed.

M/L 2 coats of synthetic enamel paint over a coat of red oxide primer on newly steel surface including preparation complete all as specified and directed.

Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out in soft/loose soil, returning, filling in & ramming earth or broken rubbles mixed with earth around in layers n.exc 25 cm complete all as specified and directed.

M&L for cement concrete type C1 (1:3:6) using 20mm graded aggregates as in post holes complete all as specified and directed.

Dismantling asbestos cement (plain, corrugated, semi corrugated etc.) sheets in roof coverings complete all asper specified and as directed.

Material and labour for 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof, fixed with L-type or J-type or cranked hook bolts etc. complete all as specified and as directed.

- Ditto- all as per serial item No 68 but except sheet complete all as specified and as directed. (Note : Serviceable materials obtained from dismantled shall be re-used.)

Material and labour for 6mm thick asbestos cement, two piece adjustable plain serrated ridge for corrugated or semi corrugated sheets fixed with L-type or J-type or cranked hook bolts etc. all as specified and as directed.

- Ditto- all as per serial item No 70 but except sheet complete all as specified and as directed. (Note : Serviceable materials obtained from dismantled shall be re-used.)

Material and labour for PCC (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) as in coping on top of wall, bed blocks, lintel band upto 1.5 m. span and the like including weathering, slightly rounded or chamfered angles and throating including use of necessary form work all as specified and as directed.

Dismantling of wall/ceiling board of any description and any thickness including cover fillets etc complete all asper specified and as directed.

M&L position suspended false ceiling system using T-grid suspended ceiling grid system. The size of grid shall be 600x600mm, with GI frame work main runner 38 x 24 x 3600mm, cross 'T' 25 x 24 x 60mm/25 x 24 x 1200mm and wall angle 24 x 24 x 2540mm (thickness of the material of 0.30mm ), using 9mm thick ceiling panel laminated with PVC film on front face and foil back available in due drop texture as per IS-2095, part-I-1996, fixed in the grid of T-grid suspended ceiling grid system duly suspended by 4mm dia GI bar hanger from the purlins of the roof with butterfly clips all as specifed and directed by Engineer- in -charge. Make:-Gyproc/Armstrong.

M&L for plaster of paris sheets false ceiling with 600 X 900 X 10 mm thick, sheet fixed with machine screws on and including grid system of GI channel 18 gauge thick, main joist placed at 750mm centers, secondary joists placed at 450 mm centers, GI angle suspenders from roof and treating the plaster of Paris sheets with thin layer of POP with gypsum binder, sanding the surfaces till smooth surfaces is obtained and finally applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

M & L for rainwater gutter system of SWR pipe 250 mm nominal dia. half round type alongwith all accessories/ fittings complete all as specified and directed. Make : Prince Model HPR18R or equivalent of Infra, Supreme, Kisan, Astron Plastic, Amogh Plast, Finolex

Demolition of brick work /stone boulder built in cement mortarcomplete all as specified and as directed.

M & L for old size fly ash brck in CM 1:6 . straight or curved on plan exc 6M mean radius , built in CM 1:6 complete all as specified and as directed.

Labour only for brickwork with old size bricks straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed

Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, plaster with two coats of OBD of any tint over a with putty complete all as specified and as directed.

M&L for 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement with two coats of cement base paint on new surface complete all as specified and as directed.

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

Sai Construction

M/S Sharvi Construction

VISALAKSHI WATER PROOFINGCOMPANY PRIVATE LTD

Gauri Associates

Parhar Enterprise

M/S CHANDAN BUILDERS

NSK ENTERPRISES

SHAH BUILDERS

ANIL CONSTRUCTION CO.

GRACE CONSTRUCTIONS