Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.1 LAccepted-Finance | L1 | Accepted-Finance Being L1 Bidder | |
| 2 | L2₹45.1 L+₹3.9 L (9.49%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 Bidder | |
| 3 | L3₹45.7 L+₹4.6 L (11.2%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 Bidder | |
| 4 | L4₹45.8 L+₹4.7 L (11.4%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 Bidder | |
| 5 | L5₹46.0 L+₹4.9 L (11.8%)Rejected-Finance | L5 | Rejected-Finance Being other than L1 Bidder |
| Sl No | Description | Qty | Unit | M/s Ats Electricals L2 | M/S JAGANNATH SASMAL L3 | DHABALESWAR ENGINEERING WORKS L4 | JPR CONSTRUCTIONS AND ENGINEERS L6 | M/S SIWALIK AND CO L1 | M/s M M Engineering Systems L5 | P JAGANNADHARAJU L7 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off premises ,complete all as specified and directed | 60 | Sqm | 98 ₹5,880 Lowest | 102 ₹6,120 | 101 ₹6,060 | 100 ₹6,000 | 100 ₹6,000 | 100 ₹6,000 | 105 ₹6,300 |
| 2.00 | M&L for non skid ceramic coloured tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed. | 5 | Sqm | 1,000 ₹5,000 Lowest | 1,528 ₹7,640 | 1,514 ₹7,570 | 1,500 ₹7,500 | 1,300 ₹6,500 | 1,500 ₹7,500 | 1,575 ₹7,875 |
| 3.00 | M&L for non skid ceramic coloured tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed. | 20 | Sqm | 1,100 ₹22,000 Lowest | 1,528 ₹30,560 | 1,514 ₹30,280 | 1,500 ₹30,000 | 1,500 ₹30,000 | 1,500 ₹30,000 | 1,575 ₹31,500 |
| 4.00 | M&L for glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment. | 30 | Sqm | 1,150 ₹34,500 Lowest | 1,223 ₹36,690 | 1,250 ₹37,500 | 1,500 ₹45,000 | 1,250 ₹37,500 | 1,200 ₹36,000 | 1,575 ₹47,250 |
| 5.00 | M&L 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. | 5 | Sqm | 4,875 ₹24,375 | 5,095 ₹25,475 | 5,049 ₹25,245 | 6,000 ₹30,000 | 4,800 ₹24,000 Lowest | 5,000 ₹25,000 | 6,300 ₹31,500 |
| 6.00 | Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed. | 2 | Cum | 1,268 ₹2,536 | 1,325 ₹2,650 | 1,313 ₹2,626 | 1,300 ₹2,600 | 1,000 ₹2,000 Lowest | 1,300 ₹2,600 | 1,365 ₹2,730 |
| 7.00 | M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring average 25 mm thick surface finished even and rough (as in levelling course) to receive the topping layer complete all as specified and directed. | 10 | Sqm | 195 ₹1,950 Lowest | 204 ₹2,040 | 202 ₹2,020 | 200 ₹2,000 | 300 ₹3,000 | 200 ₹2,000 | 210 ₹2,100 |
| 8.00 | M & L for Vitrified Ceramic tiles light shade polished (square / rectangular) of 10mm thick, area of each tile not exc. 0.36sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed. | 10 | Sqm | 1,365 ₹13,650 Lowest | 1,426 ₹14,260 | 1,413 ₹14,130 | 1,400 ₹14,000 | 1,500 ₹15,000 | 1,400 ₹14,000 | 1,470 ₹14,700 |
| 9.00 | M & L for Vitrified Ceramic tiles light shade polished (square / rectangular) of 7 to 8mm thick, area of each tile exceeding 0.42 sqm but not exc. 1.00sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed. | 5 | Sqm | 1,463 ₹7,315 Lowest | 1,528 ₹7,640 | 1,600 ₹8,000 | 1,500 ₹7,500 | 1,550 ₹7,750 | 1,500 ₹7,500 | 1,575 ₹7,875 |
| 10.00 | Demolition of brickwork built in cement or cement lime mortar including all quoins, arches pillar etc complete all as specified and directed. | 1 | Cum | 488 ₹488 Lowest | 509 ₹509 | 504 ₹504 | 500 ₹500 | 500 ₹500 | 500 ₹500 | 525 ₹525 |
Tender Value
Refer Docs
EMD Value
₹8,000
Closing Date
6 Nov 2025, 6:00 pmClosed
GARRISON ENGINEER I GOS
GARRISON ENGINEER I GOPALPUR MILITARY STATION PO GOLABANDHA DIST GANJAM ODISHA 761052
WELCOME MAINTENACE INCL MISC BR NATURE WORKS AT OFFRS MD ACCN AT HILL VIEW QSS QUARTERS MAP QUARTERS HAPPY VALLEY AND REPAIR AND REPLACEMENT OF DETERIORATED FLAME PROOF UNDER GE I GOS
2025_MES_729919_2
8000/67/2025-26/0966/E8
Open Tender
Civil Works
Item Rate
270 days
GOS
AS PER TENDER DOCUMENTS
6 documents required · 6 mandatory
₹500
GARRISON ENGINEER I GOS
₹8,000
19 Dec 2025
22 Oct 2025
8 Nov 2025
22 Oct 2025
6 Nov 2025
30 Oct 2025
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off premises ,complete all as specified and directed
M&L for non skid ceramic coloured tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.
M&L for non skid ceramic coloured tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.
M&L for glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.
M&L 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.
M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring average 25 mm thick surface finished even and rough (as in levelling course) to receive the topping layer complete all as specified and directed.
M & L for Vitrified Ceramic tiles light shade polished (square / rectangular) of 10mm thick, area of each tile not exc. 0.36sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed.
M & L for Vitrified Ceramic tiles light shade polished (square / rectangular) of 7 to 8mm thick, area of each tile exceeding 0.42 sqm but not exc. 1.00sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed.
Demolition of brickwork built in cement or cement lime mortar including all quoins, arches pillar etc complete all as specified and directed.
M&L Brick work with flyash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
Taking down cement or cement lime plaster, of any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) complete all as specified and directed.
M&L for rendering 5 mm thick in CM 1:3 on RCC ceiling surface and finished even and smooth with out using extra cement complete all as specified and directed .
Taking down chowkhat or frames n exc 1.50 Sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed
Taking down chowkhat or frames exc 1.50 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed
Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor includes cost of glass and includes all other connected accessories.) (Area not exceeding 2.00 sqm)
S & F Powder coated three track Aluminium sliding window with frame not less than 1.8 mm thick excluding aluminium grill and including 4 mm thick tinted glass, beading & necessary rubber packing, locking & opening arrangement, all fitting and fixture complete all as specified and directed.
S&F 7mm thick aluminium grills of make "Decogrill' model DG 104 surrounded by aluminium 'C' channel with mesh size 75 X 75mm all as specified and directed.
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and averagewidthof aperture1.40mm and fixed with stainless steel wire staples ,complete all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube in opening as per specification and shown on drg SSR Part-II 2010 ,complete all as specified and directed.
S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rails lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement , as per specification and shown on drawing in SSR Part-II (2010),complete all as specified and directed.
S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
S&F Flush shutters 35 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sidescomplete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Taking down shutter of any description area exceeding 1 sqm but n exc 2 sqm each and removing to store complete all as specified and directed.
Taking down shutter of any description not exceeding 1 sqm each leaf and refixing, in same opening after easing and adjusting building hard ware etc complete all as specified and directed
Taking down shutter of any description exceeding 1 sqm but not exiding 2 Sqmeach leaf and refixing, in same opening after easing and adjusting building hard ware etc complete all as specified and directed
M&L Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
S&F mild steel flat iron as in bands straps, supports or stays for rainwater, ventilating pipes including bolt if required, hooks (stay) heavy for large gates,hook and pintle hinges,large hasps and staples, brackets for WHB, hold fasts, wall ties, hooks for hanging fans ,cleats for securing purlins to wood trusses or rafters and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and directed.
M&L for Cutting holes in brick walls exc half brick but not exc one brick built in cement mortor or cement lime mortor and stone walls built in lime mortor for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.
S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed.
S&F 100 mm long aluminium handles cast type, anodized complete all as specified and directed
S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed
S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed
S&F in repair 100 mm long aluminium anodized handles fabricated type complete all as specified and directed
S&F in repair 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed.
S&F in repair 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed
S&F in repair 75 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed
S&F in repair 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed
S&F in repairs 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
Hacking out old broken glass (any thickness, size quality or description) form wooden frames or stone, concrete or brick surrounds glazed with oil putty or fixed with beads complete all as specified and directed.
S&F 3 mm thick sheet glass ordinary quality and gazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.
S&F 3 mm thick figured glass pin headed type and gazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.
S&F in repairs aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.
S&F in repairs 18/19 mm thick high density PVC/ WPC solid fibre board with prelaminated PVC sheet as Kitchen cupboard and frame including taking down the old cupboard shutters and removing to store complete all as specified and directed.
S&F continuous (piano) hinges of width of flaps (when open) 30 mm, mild steel, bright finish or electrogalvanised complete all as specified and directed
S & F magnetic catcher catcher with nut and screw of mild steel bright finish all as specified and directed
S & F 40 mm dia cupboard knobs fixed with nuts screw and washer of mild steel bright finish complete all as specified and directed.
S & F in repair 40 mm dia cupboard knobs fixed with nuts screw and washer of mild steel bright finish complete all as specified and directed.
S & F in repair hasp and stapple safety type aluminium anodised 75 mm long with mild steel hinge pin including bolt to hinge plate fixed with screw complete all as specified and directed.
S&F in repairs 15 mm dia Curtain rods, mild steel, chromium plated with fixing brackets complete all as specified and directed.
S&F in repair SS Curtain rod Bracket fancy type for curtain rod 25 mm dia of any colour as approved complete all as specified and directed.
S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, over all length of cover plate 140 mm with hard drawn steel spring fixed in door etc complete all as specified and directed.
S&F in repair single door PVC cabinet mirror of size 300 mm x 450 mm with internal shelves all as specified and directed
S & F in repair sheet Glass Shelf assembly consisting of 5.5 mm glass sheet shelf 12 cm wide with cromium plated bracket guard and railing 60 cm long complete all as specified and directed..
Taking up or down steel tubing and connections including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed.
Taking up or down steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed.
S&F GI tubes medium grade (ISI marked) with all fittings fixed complete to walls, ceilings or laid in floors of 15 mm bore of pipe complete all as specified and directed.
S&F GI tubes medium grade (ISI marked) with all fittings fixed complete to walls, ceilings or laid in floors of 20 mm bore of pipe complete all as specified and directed.
Supplying and laying as in repair of CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge.
Supplying and laying as in repair of CPVC pipes 32mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed.
Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 15 mm bore of pipe complete all as specified and directed.
Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 20 mm bore of pipe complete all as specified and directed.
S&F in repair Chromoium plated Bib cock with flanges Quarter turn 15 mm bore complete all as specified and directed. Make-Jaquar , Cera & equivalent as approved by GE and Engineer in Charge.
Taking down bib tap /wash basin tap/pillar tap/stop cock/mixture tap and refixing the same after repair and replacement of washer only for 15 mm bore size without replacing spindles complete all as specified and directed.
Taking down bib tap /wash basin tap/pillar tap/stop cock/mixture tap and refixing the same after repair and replacement of spindles for 15 mm bore size complete all as specified and directed.
S & F in repair Brass chromium plated wall mixer non-telephonic shower arrangement with connecting legs & wall flanges for 15 mm bore of pipe all as specified and directed.
S & F in repair Brass chromium plated hole bidet mixer (Basin mixer) with pop-up waste system with 300 mm long braided hoses complete all as specified and directed.
S & F in repair Brass chromium plated Sink mixer with raised J shaped swinging spout (Wall mounted model) with connecting legs & Wall flanges complete all as specified and directed.
S&F in repair Chromoium plated angular stop cock for 15 mm bore complete all as specified and directed.
S&F in repair Chromoium plated Two-way angular stop cock for 15 mm bore complete all as specified and directed.
S&F in repair, 15 mm bore stop cock, cast copper alloy with long shank and cup (concealed type) fancy type chromium plated screwed down high pressure with crutch & butterfly handle screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F in repair 15 mm bore stop cock, cast copper alloy screwed down high pressure with crutch & butterfly handle fancy type chromium plated screwed both ends for iron pipe and fixed complete all as specified and directed
S&F in repair pillar tap cast copper alloy with capstan head chromium plated crewed down high pressure with or without lettered hot or cold with long screwed sharks and ply nuts 15 mm dia complete all as specified and directed
S & F in repair bottle trap chromium plated for WHB as per approved quality all as per specified and directed.
S&F in repair PVC waste pipe for WHB etc all as specified and directed.
S&F in repairs 32 mm bore dia waste coupling of (min weight 32 mm-45 gm of PTMT) (half or full threaded) etc complete all as specified and directed
S&F in repair CP grating 100 mm dia with waste hole (minimum weight 40 gm) complete all as specified and directed
S & F in repair CP Jet spray for 15 mm bore all as specified and directed.
S & F in repairs Hand shower (Health faucet) with 1 mtr long Easy flex tube in crome finish & wall hook Make-Jaquar , Cera as approved by GE and Engineer in Charge.
M&L in repairs for vitreous china wash basin, white,flat back, size 550 x 400 mm including supply & fixing of brass chromium plated coupling 32 mm etc complete all as specified and directed.
M&L in repair Wash down water closet vitreous china white pedestal pattern with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding flushing cistern and flush pipe complete all as specified and directed.
S&F in repairs plastic water closet seat cover, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
M&L in repairs vitreous china squatting pan , ‘Orissa’ Pattern, size 580 X 440 mm white, with integral foot rests etc. complete all as specified and directed.
S & F in repair Kitchen sink made of stainless steel 1 mm thick with plug washer and waste pipe incl bedding fixing cantilever brackets and connetction union to pipe overall size 915 X 460mm bowl size 405X 355 mm complete all as specified and directed
S& F in repair 1 mm thick stainless steel plate rack of size 900X600X200 incl fixing with rawal plug and screws complete all as specified and directed.
S & F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litre capacity hoisted and fixed in position including dismantling of old u/s water tank and removing to store complete all as specified and directed
S & F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litre capacity hoisted and fixed in position including dismantling of old u/s water tank and removing to store complete all as specified and directed
S&F ball valves for 20 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed.
S&F ball valves for 25 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 455 gms) complete all as specified and directed.
S&F in repairs ball valves for 20 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed.
S&F in repairs ball valves for 25 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 455 gms) complete all as specified and directed.
S & F in repair PVC Tank cover for 500 Ltr capacity fixed in position with nuts and bolt complete all as specified and directed
S & F in repair PVC Tank cover for 1000 Ltr capacity fixed in position with nuts and bolt complete all as specified and directed
S&F in repairs, PVC valveless symphonic action type low level flushing cistern, 10 ltrs capacity with inlet, ball valve, float and handle including bracket complete all as specified and directed
S & F in repair internal fitting for low level flushing cistern (Syphon) complete all as specified and directed.
S&F in repairs flush pipe 32 mm dia of polyethylene of low or high density or PVC, for low level cistern complete all as specified and directed.
S & F in repair 125 mm dia chromium plated shower rose of with or without swivel joint incl fixing to steel pipe complete all as specified and directed.
S&F in repair PVC connection 15 mm bore, 450 mm long complete with both ends unions complete all as specified and directed.
S&F in repairs CP anodised tubular tower rail, 20 mm dia, D type, 60 cm long between flanges etc.
S & F in repair 75 mm PVC(SWR) floor trap with grating incl jointing with solvent cement complete all as specified and directed
S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe of 20 mm bore dia of pipe complete all as specified and directed.
S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends (ISI marked) for iron pipe of 25 mm bore dia of pipe complete all as specified and directed.
S & F in repair Soap dish any type fixed to plug with chromoium plated brass screw complete all as specified and directed. Make-Jaquar , Cera & equivalent as approved by GE and Engr-in -Charge .
S & F in repair corner glass shelf with brackets complete all as specified and directed. Make-Jaquar , Cera & equivalent as approved by GE and Engr-in -Charge .
S & F in repair double coat hook complete all as specified and directed. Make-Jaquar , Cera & equivalent as approved by GE and Engr-in -Charge .
S&F in repairs door seal with aluminium beading and 50 mm wide rubber seal complete fixed to aluminium/ Wooden doors complete all as specified and directed.
M&L for applying 2mm thick Birla / JK Putty in two layers on newly plastered wall surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.
M&L for applying 2mm thick Birla / JK Putty in two layers on newly plastered ceiling surfaces absolutely even and smooth, rubbing with sand paper ,complete all as specified and directed.
M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper ,complete all as specified and directed.
M&L for applying 2mm thick Birla / JK Putty in two layers on old Ceiling surfaces including complete removal of existing Ceiling finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.
M&L preparation of old painted surfaces and applying one coat of white wash on walls complete all as specified and as directed.
M&L preparation of old painted surfaces and applying one coat of white wash but on ceiling complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of walls and apply three coat of white wash complete all as specified and directed.
M&L for preparation of newly plastered surfaces of ceilings and apply three coat of white wash complete all as specified and directed.
M&L preparation of old painted surfaces and applying one coat of oil bound distemper on walls complete all as directed.
M&L for Complete removal of existing treatment and applying two coats of OBD over a coat of alkali resistant primer on wall complete all as directed by Engineer-in-Charge.
M&L for applying two coats of oil bound distemper on Ceiling surfaces over & including on prepared surfaces including, rubbing with sand paper complete all as specified and directed.
M&L for preparation of old wood or wood based surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L preparation of old decorated wooden painted surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old steel surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L preparation of old decorated Steel painted surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for two coats synthetic enamelled paint to new steel surfaces after preparation over a coat of red oxide primer area over exc 10cm in width or girth etc complete all as specified and directed.
M&L applying onr coats Cement based paint on old decorated wall surfaces, includes complete removal of existing wall finish of any type with wire brush, brooming, dusting & finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc complete all as specified and directed.
M&L applying two coats Cement based paint on old decorated wall surfaces, includes complete removal of existing wall finish of any type with wire brush, brooming, dusting & finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc complete all as specified and directed.
M & L for2 coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour ( Plastic Emulsion Paint )complete, as per manufacturer's specification after Preparation of plastered surface including a coat of primer on prepared surfaces including, rubbing with sand paper and applying ,complete all as specified and directed.
M&L applying two coats of acrylic exterior weather proof emulsion paint over a coat of exterior primer on newly plastered wall surfaces/ old decorated wall surfaces, in case of old decorated wall surfaces includes complete removal of existing wall finish of any type with wire brush, brooming, dusting & finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc complete all as specified and directed.
Demolition of Cement Concrete (unreinforced) of any description & in any position not otherwise specifically provided for complete all as specified & directed.
Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed
M&L for Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed.
M&L for Cleaning the concerned RCC surface by means of wire brush to expose the concrete surface which should be free from all loose particles, dust, laitance, etc complete all as specified and directed.
M&L for Making corner fillets with Polymer modified cementitious (PMC) mortar (PMC:C:M :: 1:2:4 by weight) at all joints of horizontal and vertical surface and doing bore packing with PMC mortar complete all as specified and directed.
M&L for the joints of pipes and concrete/masonry are to be sealed with epoxy putty or epoxy mortar (PMC:C :: 1:2 by weight) and the same is semi-rounded upto 5mm above surface level all along the periphery of PVC pipes complete all as specified and directed.
M&L for application of one coat of Acrylic Polymer Modified Cementitious (APMC) slurry (APMC:C :: 1:2 by weight) coating over the RCC slab surface and carried upto finished floor level on vertical portion (walls) complete all as specified and directed. (Note : This coat is allowed to get dry for 4-6 hours.)
M&L for application of one coat of Acrylic Polymer Modified Cementitious topping rendering (APMC:C:M :: 1:2:2) 1-1.5mm thick over the first coat Acrylic Polymer Modified Cementitious complete all as specified and directed. (Note : This coat is cured for 48 hours.)
M&L for Rendering 5 mm thick in CM 1:3 on RCC ceiling surface and finished even and smooth with out using extra cement complete all as specified and directed.
M&L Rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finish the surfaces even and smooth without using extra cement complete all as specified and directed. Note : Liquid WPC will be measured and paid separately.
M&L Water proofing treatment on "Non approachable / non accessible and approachable roof" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete (i) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm (ii) Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces complete all as specified and directed. (iii) Laying evenly over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction complete all as specified and directed. (iv) Applying two coats of bituminous aluminium paint including preparation complete all as specified and directed.
Taking down eaves gutters and rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.
S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.
S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.
S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.
S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F Stack clamps made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110 mm PVC pipe complete all as specified and directed.
S&F Stack clamps made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 75 mm PVC pipe complete all as specified and directed.
S&F PVC(SWR) bends, any radius of 110 mm bore without access door complete all as specified and directed.
S&F PVC(SWR) bends, any radius of 110 mm bore with access door complete all as specified and directed.
M/L PVC(SWR) Tee of 110mm dia etc complete all as specified and directed.
S&F PVC(SWR) bends, any radius of 75 mm bore without access door complete all as specified and directed.
S&F PVC(SWR) bends, any radius of 75 mm bore with access door complete all as specified and directed.
S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door complete all as specified and directed.
S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 75 mm dia with access door complete all as specified and directed.
S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed.
S&F in repairs PVC (SWR) floor trap of diameter of outlet 75 mm, plain with grating including jointing with solvent cement 75mm dia etc complete all as specified and directed.
S&F in repairs PVC (SWR) 'P' trap for 110 mm dia etc complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs /blankets, any thickness, including cover fillets complete all as specified and directed.
S&F 12 mm thick plain Gypsum Board False Ceiling with GI frame including all necessary drilling cutting to fix electric items complete all as specified and directed with following:- (a) GI Grid channel 30x25x20 mm of 24 gauge fixed with rawl plug and screw 450 mm centre to centre alongwith perimeter walls. (b) GI channel made to shape 50x40x40 mm of 24 gauge placed @ 600 mm centre to centre from perimeter at wall except long wall (in one span). (c) GI intermediate runners of size 45x10x10 mm of 24 gauge fixed @ 1200 mm centre to centre leaving frame of one side walls (in other span). (d) GI sheet 25 mm wide and 20 mm gauge suspended fixed with steel fastner to roof ceiling and 1200 mm centre to centre including pluging of RCC Slab. (e) 12 mm thick gypsum board filling joints with POP and finishing complete with two coat of plastic emulsion paint over one coat of primer on ceiling.
M&L for Cleaning and removing all scale and dirt, etc, from RCC/PVC tanks exc 250 ltr n.exc 500 ltr capacity incl washing of water tank with the use of Tank cleaning motor jet pressure machine and using bleaching powder @ 0.25 Kgs per tank with writing the date of cleaning with any type of paint and from mouths of circulating pipes, including disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.
M&L for Cleaning and removing all scale and dirt, etc, from RCC/PVC tanks exc 500 ltr n.exc 1000 ltr capacity incl washing of water tank with the use of Tank cleaning motor jet pressure machine and using with bleaching powder @ 0.50 Kgs per tank with writing the date of cleaning with any type of paint and from mouths of circulating pipes, including disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
M&L for 12 mm thick designer anti-skid tread tiles for steps with bull nose edge and self-embossed grooves complete all as specified and directed.
M&L for 12 mm thick designer anti-skid riser tiles for steps with bull nose edge complete all as specified and directed.
M&L for 10 mm thick designer landing tiles with matching shade and colour with riser and treads complete all as specified and directed.
S&F in repairs door closer hydraulically regulated designation No 2, universal type, suitable for door shutter of weight between 36 to 60 Kg of aluminium (Die cast) body complete all as specified and directed.
S & F in repair Europian WC floor mounted cascade pattern vitreous china with dual core flushing cistern incl all fitting flush pipe etc make Hindware cat 92048 (starwhite) or equivalent of specified make complete all as specified and directed.
S&F in repairs Stainless Steel Towel Rack 600 mm long with Lower Hangers but with 3 hooks.
S & F repair Over head Shower 100 mm round shape single flow (ABS body chrome plated with gray face plate ) with rubit cleaning system complete all as specified and directed.
S & F in repair chromium plated towel ring with bracket complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones or stone, concrete or brick surrounds, glazed with putty or fixed with bead all as specified and directed
M&L 12 mm Toughned glass as in hinged doors , parttions automatic door and similar work incl cutting to shape , drilling holes required .
M&L in repairs for vitreous china wash basin, white,flat back, size 550 x 400 mm with pedestal including supply & fixing of brass chromium plated coupling 32 mm etc complete all as specified and directed.
S & F in repair Brass chromium plated wall mixer fancy type with telephonic shower arrangement with connecting legs & wall flanges for 15 mm bore of pipe all as specified and directed.
S & F in repair Brass chromium plated fancy type hole bidet mixer (Basin mixer) with long bodypop-up waste system with 300 mm long braided hoses complete all as specified and directed.
S & F in repair Brass chromium plated Sink mixer with raised swan shaped shaped swinging spout (Wall mounted model) with connecting legs & Wall flanges complete all as specified and directed.
Attending day to day Complaint related to carpenter works like door easing, door repair, kitchen cup board repair, window/door wire mesh/glass pane repair, refixing of building hardware etc by deploying carpentor and mazdoor. Note : (a) The complaints related to carpenter works, plumbing works, cement works and welding works against serial item Nos 198 to 200 shall be completed in 48 hours time after lodging/ receipt of complaints. Contractor shall ensure that all the complaints shall be attended and completed within above prescribed schedule/ time period, failing which, a penalty at the rate of double the quoted rate for that particular trade work/complaint per day till the satisfactorily completion of complaint shall be levied on the contractor and recovery for the same shall be affected from contractor's dues. (b) Complaint slip and complaint register etc. shall be provided by the contractor without any extra cost to the department and cost there of shall be deemed to be included in quoted rates by the contractor against respective items. (c) Necessary transportations, tools, plants, ladders, including nails, screws, PVC washers, brass spindle, for bib taps/ stop cocks/ pillar cocks, cotton thread, Jumper valves, white lead, flush washers, internal fitting of low level flushing cistern, nipple, tee, elbow, plug, socket, reducer (GI/UPVC), M-seal, glass putty, hinges, handle, tower bolt, aldrop,stopper, cement, white cement, sand other similar minor accessories required to complete the jobs/complaints shall be provided by the contractor without any extra cost to the department and cost there of shall deemed to be included in quoted rates by the contractor against respective item of schedule 'A'.
Attending day to day Complaint related to plumbing works like repair/refixing of Bib tap, Stop cock, Angle cock Connection pipes, waste pipes, Flush tank, Flush pipe,Shower, Pvc tank, ball valves, towel rail ,WHB,EWC, waste coupling, Grating,Pillar tap etc.by deploying plumber and mazdoor. Note : (a) The complaints related to carpenter works, plumbing works, cement works and welding works against serial item Nos 198 to 200 shall be completed in 48 hours time after lodging/ receipt of complaints. Contractor shall ensure that all the complaints shall be attended and completed within above prescribed schedule/ time period, failing which, a penalty at the rate of double the quoted rate for that particular trade work/complaint per day till the satisfactorily completion of complaint shall be levied on the contractor and recovery for the same shall be affected from contractor's dues. (b) Complaint slip and complaint register etc. shall be provided by the contractor without any extra cost to the department and cost there of shall be deemed to be included in quoted rates by the contractor against respective items. (c) Necessary transportations, tools, plants, ladders, including nails, screws, PVC washers, brass spindle, for bib taps/ stop cocks/ pillar cocks, cotton thread, Jumper valves, white lead, flush washers, internal fitting of low level flushing cistern, nipple, tee, elbow, plug, socket, reducer (GI/UPVC), M-seal, glass putty, hinges, handle, tower bolt, aldrop,stopper, cement, white cement, sand other similar minor accessories required to complete the jobs/complaints shall be provided by the contractor without any extra cost to the department and cost there of shall deemed to be included in quoted rates by the contractor against respective item of schedule 'A'.
Attending day to dayComplaint related to cement works like repair to floors/ wall plaster in patches/ filling of holes, tiles repairs etc. by deploying mason and mazdoor. Note : (a) The complaints related to carpenter works, plumbing works, cement works and welding works against serial item Nos 198 to 200 shall be completed in 48 hours time after lodging/ receipt of complaints. Contractor shall ensure that all the complaints shall be attended and completed within above prescribed schedule/ time period, failing which, a penalty at the rate of double the quoted rate for that particular trade work/complaint per day till the satisfactorily completion of complaint shall be levied on the contractor and recovery for the same shall be affected from contractor's dues. (b) Complaint slip and complaint register etc. shall be provided by the contractor without any extra cost to the department and cost there of shall be deemed to be included in quoted rates by the contractor against respective items. (c) Necessary transportations, tools, plants, ladders, including nails, screws, PVC washers, brass spindle, for bib taps/ stop cocks/ pillar cocks, cotton thread, Jumper valves, white lead, flush washers, internal fitting of low level flushing cistern, nipple, tee, elbow, plug, socket, reducer (GI/UPVC), M-seal, glass putty, hinges, handle, tower bolt, aldrop,stopper, cement, white cement, sand other similar minor accessories required to complete the jobs/complaints shall be provided by the contractor without any extra cost to the department and cost there of shall deemed to be included in quoted rates by the contractor against respective item of schedule 'A'.
Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings i.e removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made for conditions separately ) and including making good the disturbed surfaces to match with existing surface and colour shade with putty for smooth finishing without andulations complete all as specified and directed
Material and labour for cutting chasing,pinning of brick/ stone/concrete wall at any height wall cutting and chases for concealed wiring for 20/25 mm PVC conduit dia pipe,water tubing,etc and making good to facings where required and pointing in cement motor 1:3 to ends or edges of landigs,wall surfaces etc,cutting not exc 10 cm girth and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed
M&L for flame proof and weather proof point wiring using approved colour coding incl providing circuit wiring with 1.5 sqmm PVC insulated, FRHR/FRLS type, ISI marked,conf to IS-694/2010 unsheathed, multistranded, single core, copper cable 1100 volts grade cables drawn through in flame proof and weathere proof ss conduit pipes (stove enamelled steel Conduit) 25 mm dia medium grade(MMS) including providing all steel conduit accessories such as bend, tee,elbow,short pieces etc at any height are surface/consealed in walls / roofs / floors / ceiling as per site requirement etc. flame proof flush mounting modular MS box made out of 1.60mm thick suitable for flame proof switches,sockets,fan regulators, blank plate etc and including 1.5 Sqmm PVC insulated multistranded FRHR type unsheathed(Green colour),single core cable with copper cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade with necessary putty for smooth finishing complete all as specified and directed for the One light point controlled by one switch.
All as per item no. 184 but for One fan point controlled by one switch and one regulator.
All as per item no. 184 but for One exhaust fan point controlled by one switch .
All as per item no. 184 but for One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .
All as per item no. 184 but forOne 5 pin 6 amps socket point controlled by one 6 amps switch on same board .
All as per item No.184 above,but point wiring with 2.5 sqmm and earth conductor of size 1.5 sqmm complete all as specified and directed for One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on independent board.
All as per item No.189 One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on same board.
All as per item No 189 above ,but point wiring with 4.0 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed.
Supply & fixing flame proof and weather proof switches rotary type with termination box in LM6,16 A, Single pole, 250V,AC, ISI Marked complete all as specified and directed.
Supply & fixing flame proof and weather proof switches rotary type with termination box in LM6,16 A, double pole 16A, 250V,AC, ISI Marked complete all as specified and directed.
Supply & fixing flame proof and weather proof switches rotary type with cable termination box in LM6, double pole 25A, 250V,AC, ISI Marked complete all as specified and directed.
Supply & fixing flame proof and weather proof switch socket & plug combied in LM6,cable termination box in LM6,16A,250v,2P+earth with termination box ISI Marked complete all as specified and directed.
Supply & fixing flame proof and weather proof switch socket & plug combied in LM6,cable termination box in LM6,25A,250v,2P+earth with termination box ISI Marked complete all as specified and directed.
Supply & fixing flame proof and weather proof fan regulator in LM6,cable termination box in LM6,25A,250v,2P+earth with termination box ISI Marked complete all as specified and directed.
Supply and fixing flame proof and weather proof LED batten suitable for single and twin T8 Tube of 16/18/20watt with recommended/suitable for gas/vapor group IIA & IIB and zoe 1&2 of IP65 protective and connecting of electrical connections and testing for its satisfactory performance and incl removing old unserviceable fittings complete all as specified and as directed
Supply & fix LED T-8 tubular lamp 20 watt with extruded aluminium/PC body and PC diffuser complete with inbuilt LED driver complete all as specified and directed.
Supply and fixing inrepairs flame proof weather proof LED flood light fittings and fixtures 90 watt rating ,240 volts and including providing necessary fixing arrangements,drivers,nuts,bolts and washers and removing old unserviceable items complete all as specified and directed.
Supply and fixing inrepairs flame proof weather proof LED flood light fittings and fixtures 100 watt rating ,240 volts and including providing necessary fixing arrangements,drivers,nuts,bolts and washers and removing old unserviceable items complete all as specified and directed.
Supply and fixing inrepairs flame proof weather proof LED flood light fittings and fixtures 120 watt rating ,240 volts and including providing necessary fixing arrangements,drivers,nuts,bolts and washers and removing old unserviceable items complete all as specified and directed.
Supply and fixing inrepairs flame proof weather proof LED bulkhead light fittings and fixtures 30 watt rating ,240 volts and including providing necessary fixing arrangements,drivers,nuts,bolts and washers and removing old unserviceable items complete all as specified and directed.
Supply and fixing inrepair flame proof and weatherproof plug in switch and socket 16A,3pin,2P+E incl all necessary accessories arrangements,nuts,bolts and washers and removing old unserviceable items complete all as specified and directed.
Supply and fixing inrepair flame proof and weatherproof 3 way junction box,100mm dia incl all necessary accessories arrangements,nuts,bolts and washers and removing old unserviceable items complete all as specified and directed.
Supply and fixing inrepair flame proof and weatherproof 4 way junction box,100mm dia and incl all necessary accessories arrangements,nuts,bolts and washers and removing old unserviceable items complete all as specified and directed.
Supply and fixing inrepair flame proof and weatherproof SS conduit flexible type pipe 300mm dia and incl all necessary accessories arrangements,nuts,bolts and washers and removing old unserviceable items complete all as specified and directed.
Supply and fixing inrepair flame proof and weatherproof SS conduit flexible type pipe 500mm dia and incl all necessary accessories arrangements,nuts,bolts and washers and removing old unserviceable items complete all as specified and directed.
M & L for flame proof and weatherproof sub main wiring with approved colour coding as per IS complete with 2 run of 6 sqmm single core copper conductor cable 1100 volts grade, ISI marked,FRHR/FRLS type,conf to IS-694/1990 as amended, PVC insulated, unsheathed,flexible,multi stranded copper cables drawn through in flame proof and weathere proof ss conduit pipes (stove enamelled steel Conduit) 25 mm dia medium grade(MMS) including providing all steel conduit accessories such as bend, tee,elbow,short pieces,flexible steel pipe etc at any height are surface/consealed in walls / roofs / floors / ceiling as per site requirement etc and including one run of 6 sqmm single core copper cable 1100 volts grade, ISI marked,FRLS type,as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of ss conduit shall be measured as one unit.
M & L for flame proof and weatherproof sub main wiring with approved colour coding as per IS complete with 2 run of 4 sqmm single core copper conductor cable 1100 volts grade, ISI marked,FRHR/FRLS type,conf to IS-694/1990 as amended, PVC insulated, unsheathed,flexible,multi stranded copper cables drawn through in flame proof and weathere proof ss conduit pipes (stove enamelled steel Conduit) 25 mm dia medium grade(MMS) including providing all steel conduit accessories such as bend, tee,elbow,short pieces,flexible steel pipe etc at any height are surface/consealed in walls / roofs / floors / ceiling as per site requirement etc and including one run of 4 sqmm single core copper cable 1100 volts grade, ISI marked,FRLS type,as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 4 sqmm single core copper conductor cable and one run of 4 sqmm single core copper conductor cable as earth continuity and one run of ss conduit shall be measured as one unit.
Supply & fix flame proof and weather proof sheet metal enclosure size 330x350x190mm, flame proof lighting distribution panel incoming :- MCB 2P,32Amps-01 Nos,outgoing :- MCB, SP, 6 Amps-06 Nos double door 240 volts AC,SPN,DB, 8 way, flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer,MCB SPN/DP, and MCB SP as outgoing and incl removing old unserviceable DBs complete all as specified and as directed. Make: - Shyaam switchgear product code SSPL/MCDB/186 or equivalent as approved.
Supply & fix flame proof and weather proof MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked complete all as specified and directed.
Supply & fix flame proof and weather proof and MCB SPN 32 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked complete all as specified and directed.
Supply and fixing flame proof and weatherproof exhaust fan with out side louvers 18'',0.25HP,SP 240 Volts of IP65 protective and connecting of electrical connections and testing for its satisfactory and incl removing old unserviceable DBs complete all as specified and as directed.
Supply and fixing flame proof and weatherproof ceiling fan with regulator 48'',SP 240 Volts of IP65 protective and connecting of electrical connections and testing for its satisfactory and incl removing old unserviceable item complete all as specified and as directed.
Supply and fixing flame proof and weatherproof wall fan with out side louvers 18'',0.25HP,SP 240 Volts of IP65 protective and connecting of electrical connections and testing for its satisfactory and incl removing old unserviceable DBs complete all as specified and as directed.
Supply and fixing flame proof and weatherproof pedestal fan with out side louvers 18'',0.25HP,SP 240 Volts of IP65 protective and connecting of electrical connections and testing for its satisfactory and incl removing old unserviceable DBs complete all as specified and as directed.
Takig down old unsv all types of ceiling fans/exhaust fans/wall fans etc of any sweep after disconnecting all necessary electrical connections from ceiling rose to fans and deposited to custodian/MES store yard of AGE E/M Complete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, and connected accessories, 230 V, 1200/1400mm sweep,regulator. Min air delivery 225 CFM with service value 6.00 BEE,Star rated with brushless direct current motor and including removing old unsv items complete all as specified and directed.
Hanging/fixing only of ceiling fans and connecting up including provision of cable from ceiling rose to fan connector complete all as specified and directed. (Item operated for supply only fans)
Supply and fix new exhaust fan, steel body AC single phase.230Volts of size 300 mm sweep with blades and frame with louvers complete all as specified and directed.
Supply and fix new exhaust fan, steel body AC single phase.230Volts of size 200 /250 mm sweep with blades and frame with louvers complete all as specified and directed.
Supply and fix new exhaust fan, steel body AC single phase.230Volts of size 380 mm sweep with blades and frame with louvers complete all as specified and directed.
Supply and fix new exhaust fan, steel body AC single phase.230Volts of size 450 mm sweep with blades and frame with louvers complete all as specified and directed.
Supply anf fixing new exhaust fan made of sturd engineering plastic PVC type complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep 300 mm complete all as specified and directed.
Supply anf fixing new exhaust fan made of sturd engineering plastic complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep 250 mm complete all as specified and directed.
Supply anf fixing new exhaust fan made of sturd engineering plastic complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep 200 mm complete all as specified and directed.
Material and labour for PVC insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 25 sqmm ,2 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers,saddeling on wall properly etc and testing and including removing old unsv UG cables complete all as specified and directed.
Material and labour for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM,RCC/(PVC hevy duty cover) cover 1:2:4 type B1 of size 45X45X6 CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old item complete all as specified and directed.
Boaring holes horizontally under road without damaging the surface of road (minimum 1.0 Mtr bellow the road surface) with the help of GI tubing of any dia not exc 80mm dia for passing of UG cable all as specified and as directed.
Material and labour for PCC 1:2:4 type B1 using (20 mm graded stone aggregate) for making good cutting portion coping of pole and filling of foundation etc including necessary use and waste of form work complete all as specified and directed.Note:- Top surface of pole coping to making smooth finishing and white washing made by the contractor cost deemed into quoted rete only.
Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed.
Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil complete all as specified and directed.
Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed
Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed
M & L for brick sub class 'B' 250mm x 115mm x 0.75mm and laid in trenches as in protection of UG cable complete all as specified and directed.
Material & labour for GI pipe 50 mm "light grade" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and directed.
Material & labour for GI pipe 80 mm "light grade" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and directed.
Supply and fix copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade 3 core ;2.5 sqmm and including electric connection through PVC conduit in concealed/casing caping in surface from ceiling fan to ceiling rose and including removing old unserviceable item complete all as specified and directed.
M/s Ats Electricals (BID ID -3468009)
M/S JAGANNATH SASMAL (BID ID -3468057)
DHABALESWAR ENGINEERING WORKS (BID ID -3468080)
M/s M M Engineering Systems (BID ID -3468849)
JPR CONSTRUCTIONS AND ENGINEERS (BID ID -3468163)
P JAGANNADHARAJU (BID ID -3468201)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.53 MB
tender67.pdf
Tender Documents • 1.35 MB
BOQ_824500.xls
BOQ • 3.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .