REPAIRS TO WOODEN FURNITURE SOFA SET REPAIRS AND RECANNING OF CHAIRS AND POLISHING OF WOODEN FURNITURE AT GE AF TAMBARAM

BED PLYTOP: FD-246 Removing the old unserviceable head board including legs from bed plywood top, supply and fix new head board of size 900 mm x 660 mm made out of 2 Nos of verticals of size 60 mm x 60 mm x 660 mm using 1st class hard wood (verticals shall be shaped as legs of size 60 mm x 60 mm at top and 30 mm x 30 mm at bottom) and 2 Nos of stiffeners 40 mm x 60 mm ( Top and bottom round shaped) with 75 mm width and 22 mm thick soft wood battens between stiffeners covered with 4 mm thick plywood OST exterior grade on both side and 12 mm half rounded teak wood beading around the edges of plywood by providing 2 Nos of 25 mm size round head brass screws for MNF set key holes and complete all as specified and as per drawing & as directed.

All as per item No 1 above but foot board of bed plywood top of size 900 mm x 500 mm.

supply and fix long rail of bed plywood top of size 90 mm x 35 mm,1980 mm long made from Ist class hard wood and providing brackets 2 Nos made from flat iron of size 35 mm x 5 mm thick, 200 mm long on both ends and finishing the exposed wooden surface with including removing the old unserviceable long rail complete all as specified and as per drawing & as directed.

Removing the old unserviceable plywood from bed plywood top, supply and fix new plywood BWR type, exterior grade (Make: Green Ply/Century/Archid Ply), approved quality of size 1900 mm x 900 mm, 12 mm thick with suitable size of MS screws as per required for fixing of ply top, complete all as specified and as per drawing & as directed.

Removing the existing unserviceable /broken wooden stiffeners (supporting pieces) and supply and fix 1st class hard wooden stiffeners of size 45mmx 45mm x 900mm long duly fixed between both long rail at equal distance to support top of Bed with ply wood top as specified all as shown on drg and as directed by Eng-in-Charge.

Repairs to shaking of Bed hard with ply top and provided new MS L clamp 75mm x 75mm x 50mm ,5mm thick 4 Nos of each set for Bed hard with ply top complete all as specified as per drawing.

TABLE DINING 8 PERSONS : FD-239 & 273 Removing the unserviceable top of table dining 8 persons, supply and fix new top of size 1800 mm x 900 mm made out of 18 mm thick commercial ply wood, BWR grade, approved make/quality fixed with 1mm thick plastic laminated sheet-matt finished and 4mm thick teakwood beading all around the table top and complete all as specified and as per drawing & as directed.

Removing the old unserviceable damaged leg of table dining 8 persons, supply and fix new leg of size 75 mm x 40 mmx 722 mm long made from 1st class hard wood shape equal to match with the other extending legs and the existing complete all as specified and as per drawing & as directed.

Replacing the long rails of table dining 8 persons by removing the unserviceable old long rail, supply and fix new long rail made of 1st class hard wood of size 25 mm x 100 mm x 1800 mm long approved quality and complete all as specified and as per drawing & as directed.

Replacing the short rails of table dining 8 persons by removing the unserviceable old side rail, supply and fix new side rail made out of 1st class hard wood of size 25 mm x100mm X 900 mm long approved quality and complete all as specified and as per drawing & as directed.