SPECIAL REPAIR TO BLDG NO P32 OR MD ACCN AT AKHNOOR UNDER GE NORTH AKHNOOR

Amount

Taking down old treatment including paddding, removing existing bitumen felt treatment incl brushing,cleaning top surfaces of roof slab,broming etc.

M&L for rendering 15mm thick cement plaster with cement mortar(1:4) on fair finishes of brick work or concrete surface of roof slab all as specified.

Roof treatment :- (a) Apply a coat of biruminous primer conforming to IS - 3384 @ 0.40 Kg/Sqm on prepardd surfaces. (b) After drying of primer apply a coat of hot blown 85/25 penetration grade blown bitumen conforming to (IS-702 @ 1.20 Kg/Sqm of surfaces. (c) Provide APP modified polymeric five layed membrane with central core of 100 micron high molecular high density film. Minium width of APP modified water proofing membrane shall be 3 Kg per Sqm. Product Name Multi p[lus manufactured by M/S STP texa Ltd Gurgoan/Hyper Plus Standard Manufactured by IWL India ltd Chennai, Bengal Acquaflux manufactured by Bengal bitumen New Delhi/Superior plus 310 by STP Lfd and any other product as appproved by E-in-C Br will be used. APP membranne will be laid across the slop from lowest line of slopping roof toward ridge with minimum end lap of 150mm and side lap of 75mm bonded with hot blown. (d) Over the APP membrane apply semi hot blown 85/25 grade bitumen penetration of bitumen when tested as perIS 1203 will not be more than 40/Confiming to IS 702 @ 1.20 Kg/Sqm and blinded with fine sand in dry condition @ 0.50 Kg/Sqm dusted over the bvitumen coat. (e) Coved fillet in PCC (1:2:4) type BO radius 75mm shall be provided at the junction of roof and vertical surface such as parapet wall around opening and treatment mentioned above (except fine sand) shall be applied followed by a cement plaster 20mm thick in CM 1:6.

Sunken Floor treatment :- Providing and laying of water proofing treatment to sunken portion by applying cement slurry mixed with acralic based polymer modified cementitious composite compound of make as approved including demolation and filling of sunken floor. (a) First layer of slurry of cement @ 0.488 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @0.253 Kg/Sqm. This layer allowed to air cure for 4 Hours. (b) Second layer of slurry of cement @ 0.242 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.125 Kg/ Sqm his layer allowed to air cure for 4 Hours. Note :-Concrete for sunken slabs shall be mixed with WP comounds as manufacturdrs instructions before carrying out water proofing treatment the sunken slab slab shall be tested with water for 48 hrs for any leakage/dampeness is seen in ceiling below, then treatment is again carried out to RCC slab and it is again tested ( Water proof compound rate is seperatly.

Fixing 10mm dia PVC nozzles and injection grouting using Dr Fix IT URP 301 of M/s Pidilite Industries or equivlent as in sunken floor/ceiling all as per manufacturer's instrutions. Note : Nos and loc shall be as directed by Engr-in-charge.

Dismantling asbestos cement (corrugated, semi corrugated) sheets including ridges as in roof covering.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as directed.

M&L Pre-painted galvalume aluminium zinc coating GI based plain steel piece adjustable unserrated ridge , hips,or in Eaves board and fixed with L hook or cranked bolts .

Dismantling structural steel work in framed trusses n.exc 10m in any section and shape.

S & F Mild Steel Roof trusses (framed) trussed, purlins, fastening and heavy brackets framing (Beam, tee, angle, channel or flate sections) including distance piece cleates Fe 290 Gde E165 all as specified and directed.

Dismantling of wall and ceiling boards ( fibre ,pulp, insulation,etc,) or insulation boards/slabs/blankets any thickness,including cover fillets.

S&F GI frame work 605 x 605mm for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and wev of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre intermediate channel 0.9mm thick having two equal flanges of 15mm each web of 45mm suspended from sofit itat approx x 900mm c/c with GI cleat and steel expansion fasteners with and including celing section (n.exc 1.2m length) of 0.55mm thickness having kruled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 c/c incliding 4mm thick Non absetos desinger board in grid and applying three coats of white wash including preparation of surfaces.

Restraining,resecuring including making good of loose/disturbed GI snap grid ceiling frame work incl carefully taking down ceiling board and refixing in position, complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster from brick or stone walls incl racking out joints hacking for key, scrubbing down with water etc.

M&L for rendering 15mm thick cement plaster with cement mortar(1:4) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement .

M&L for rendering 10 mm thick cement plaster with cement mortar(1:6)on other than fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement.

M&L for rendering 5mm thick cement plaster with cement mortar(1:3) on concrete surface as in ceiling finished even and smooth without using extra cement.

Supply only integral water proofing compound

M & L Perparatrion of newly / Old plastered surfaces of walls and applying two coat of oil bound distemper over one coat of primer all as speicfied and directed.

M&L for preparation of new / old treated surfaces and apply two coat of white wash to walls.

M&L for preparation of new /old surfaces and apply two coat of cement base paint to walls.including one coat of cement primer.

M& L for preparation of new /old treated surface and apply two coat white wash on ceiling.

M&L for preparation complete removal of exising treatment of old surfaces.

Repairs to balcony/Facia and soffit of chajjas etc by taking down old rendering 20 to 25 mm thick to match with the existing thickness in CM 1:3 and hacking clearly the edges and corners smooth and rounded for new plastered area exceeding 30sqm cm in width or girth incl preparatoin of suface and two coat of cement base paint /apex as reqd over one coat of primer/scaffolding work upto height of 7.0m complete all as specified.

Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demoltion complete all as specified.

M& L reinforcement cement concrete (nominal mix) type B1 1:2:4 (20mm graded stone aggregatge) for Chajjas/Balcony/Landing work if any all as per specified.

S & F mild steel bars 10mm dia Fe 410W Gde E-250 and over cut to length bent to shape required including cranking, bending sprially for hopping for columns, hooking ends and binding with and includig mild steel wire not less than 0.9mm dia or securing with clips complete fixed in repairs all as specified and directed.

M & L Formwork to sides and soffits/faccia of floor or roof beams, beam haunch?ings, girders, bressummers, lintels, chajja, cantilevers, shelves including sup- ports, overhangs, etc. complete all as specified.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store andd rubbish off the premises

M & L Green Marble work 18mm to 20mm thick (tabel rubbed and polished) in steps of staircase/kitchen platform and like in cement mortar (1:4) inclduing pointing in white cment (1:2) using marble dust with admixture of opigment ot match with marble shade of Green marble including 15mm thick screed bed/base in CM 1:4, roughening/cleaning to existing surface of old concrete floor by pickin, sweeping clean and washing down with water to remove dirt/dust and brushing neat cement slurry with 3.0 kg of cement per sqm all as specified and as approved by the GE/Engr-in-Charge.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed in cement and sand mortar 1:4.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors/Skirting etc. Set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed in cement and sand mortar 1:4.

M&L Glazed ceramic tile 300 x 200 x 06-7mm thick (coloured) on vertical surfaces such as dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick screed bed in cement and sand mortar 1:4.

M&L for machine cut kota stone slab flooring 18-20mm thick as in riser of steps ,skirting, dado and pillar , over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade or the slab including rubbing and polishing complete including 20 mm thick in CM 1:3 screed for laying Kota Stone.

Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) exc 1.50 m and n.exc 4.00 Sqm each.

Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) nexc 1.50 sqm complete all as specified and directed.

Re-fixing shutters of any description in same opening exc 1.00 m and n.exc 2.00 Sqm.

M & L Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of red oxide primer, providing mild steel 6 mm dia thresh old bar and filling hollow of frame of following sizes of frame :-125X60mm.

Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of red oxide primer, providing mild steel 6 mm dia thresh old bar and filling hollow of frame of following sizes of frame :-105x60mm.

PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame.and including 50 mm parapet coping all as specified etc.

S & F 35mm thick Flush shutters, solid core with particle board exterior grade as per IS-2202 of 199 (Part-I). Flush door shutter shall be internally lipped as per clause 8.52.2 of SSR-2009 Part-I complete all as specified and directed by Engr-in-Charge.

S&F Glazed and skelton shutters 30 mm thick second class hard wood, opened rebated and prepared to receive wire mesh etc, edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for sucuring witre mesh etc. Size of members of shutters as specified in SSR Part-I, Sec-8, clause 8.24(a).

Mild steel springs for doors, 150 mm, ordinary rat tail rod pattern springs including roller and roller plate complete.

S&F 100 mm butt hinges, medium weight cold rolled mild steel.

S&F 75 mm butt hinges, medium weight cold rolled mild steel.

S&F Aluminium handles cast type anodised of size 150mm long ISI marked complete.

S&F Aluminium anodised barrel tower bolt 200 mm, extruded section.

S&F Hasp and stapple safety type of aluminium anodised 100 mm long as a cupboard locker.

S&F aluminium anodised sliding door bolts with hasp and stapple extruded section or cast aluminium alloy 300 mm long.

S&F 2nd class hard wood as small fittings not exceeding 200 cu.cm. each such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours.

S & F Steel window/ventilator (Box type) factory made with double shutter (wire gauged shutter and glass/glazzed shutter, wire cloth and glass paned shall be measured and paid separately of size 79mm x 39 mm, 16 guage rectangular tubular frame with side hung.

All as per item No 51 here-in-before but without glazing bars.

S&F Galvanised steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed in repairs.

S&F Glazing with sheet, 4mm thick, ordinary quality and glazing with oil putty and glazing pins in squares not exceeding 0.5 Sqm in each pane.

S&F figured glass sheet, 4mm thick, ordinary quality and glazing with oil putty and glazing pins in squares not exceeding 0.5 Sqm in each pane.

S&F Floor door stopper 140mm overall length of cover plate of aluminium alloy body and tongue,nodised,with hard drawn steel spring,fixed in floor

M&L pre laminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screw to timber frame in repairs as cupboard shelve and shutter, 19 mm thick.

M&L pre laminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screw to timber frame in repairs as cupboard shelve and shutter, 12 mm thick. (Kitchen cup board/covered bottom shelf of cooking platform).

M & L extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as a gap insert for top rail and bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles and nails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at side as per specification and drawings.

Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as in door and in cupboard frame as per specification and drawing.

S&F curtain rail ,20 mm dia anodised aluminium alloy ,cromium plated fixed with braket, incl taking down of old curtain rods, all as directed.

M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier.

M&L for preparation of new untreated wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer.

Providing cement concrete type C-1, 1:3:6 ( using 20mm graded stone aggregate), 50 mm thick as in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair on top without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete bays and in between the walling and plinth protection, filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand ( all by weight).

Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete.

Taking up or down steel water tubing and connections of following descriptions :-20mm.

Taking up or down steel water tubing and connections of following descriptions :-15 mm.

Mild steel galvanized steel tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete of following descriptions :-20 mm.

All as per Srl Item No 69 here-in-above but re-fixing old steel tubing of following descriptions:-20 mm.

Mild steel galvanized steel tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete of following descriptions :-15 mm .

All as per Srl Item No 71 here-in-above but re-fixing old steel tubing of following descriptions:-15mm.

S&F bib tap Long Body cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe 15 mm dia fixed in repairs.

S&F stop valves cast copper alloy screwed down high pressure , 15 dia bore fixed in repairs.

S&F stop valves cast copper alloy serwed down high pressure with crutch or butterfly handle 20mm dia bore fixed in repairs.

S&F ball valve high pressure PTMT with epoxy coated aluminium rod & high density plastic ball 20mm dia bore.

PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete, fixed in repairs.

S&F vitreous china squtting pan "Orissa Pattern" size 580 x 440 mm in any coloured with integral foot rest incl lime motor, 'S' trap and complete all as specified, fixed in repairs.including taking down all as specified.

S&F PVC connection 15 mm size with PTMT nuts 450 mm long.

S&F Aluminium anodised towel rail 20mm dia 'D' type 60 cm long between flanges .

S&F stainless steel gratings 100mm bore size fixed with cement motar.

S&F Swivel shower of PTMT any colour for fixing with 15 mm pipe ,with shower arm of size 195 mm long with bend of 54 digree with flange of any colour (minimum weight 40 gm), supplied and fixed in repairs complete.

Taking down eaves gutters, soil and waste pipe (any size or pattern ), includding all fittings, heads , shoes bends , swan-necks etc . All as specified.

S & F 110mm bore PVC SWR Type-B pipes single socket in any length with rubber joints fixed in floors etc all as specified and directed.

S & F in replairs PVC SWR bends any radius 75 mm bore all as specified.

S & F sand PVC waste pipes 110mm dia in any length fixed to walls with PVC//MS holder but clamps and conforming to IS-1729 complete all as specified and directed.

All as description of Srl No 86 above but 75mm bore.

S&F PVC Type-B Bends (any radius) diminishing pieces or tapers (larger bore measured) for pvc pipes fixed in repairs, 110 mm bore complete all as specified and directed.

S & F PVC Type- B branch pipes 110mm single equal or unequal ordinary or inverted (spigot or socket type) fixed in repair with paralled branches all as specified and directed.

S & F PVC branch pipes 110mm double equal or unequal ordinary or inverted (spigot or socket type) fixed in repair with paralled branches all as specified and directed.

S & F PVC junction, single, equal or unequal, ordinary or inverted with spigot or socket branch of 75mm bore complete all as specified and directed.

Add to above item if provided 110mm bore with access door pvc cover complete all as specified.

S & F PVC cowls 110mm fixed in repairs all as specified directed.

S & F PVC 75mm vent horn fixed in repairs complete all as specified.

S & F PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified.

S&F sinks with drainage board made of stainless steel 1mm thick for kitchen with plugs, CP waste coupling, waste pipe and including in cement mortar to wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm.

S &F Brass Cp mixer for sink, cast copper alloy (ISI Marked) fancy type chromium plated for mixing hot and cold water screwed down high pressure with capstain head screwed both ends for iron pipe 15mm bore incl add if fixed in repairs complete all as specified and directed.

S & F Pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ wih long screwed shanks and fly nuts, screwed for iron pipe and fixed in repairs, 15 mm bore dia of pipe, fixed in repairs.

S&F Plate rack made of stainless steel 0.8mm thick overall size 750mm x 600mm complete all as specified and directed.

S&F CP Brass wall mixture with Telephonic shower arrangement for mixing hot cold water supply screwed down incl connecting legs & wall flanges for iron pipe 15mm dia bore fancy type in repair complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches , pillars etc.

M&L Brick work with sub class 'B' bricks , straight or curved on plan exc. 6 mtr mean radius built in CM 1:6

Demolition and breaking up drain pipes set in cement mortar of any diameter incl bends, complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as require complete all as specifed & directed.

Concrete bed to drain pipes 1:3:6 type C-2 using 40mm graded crushed stone aggregate including packing under and haunching against the side of pipes after they are laid and tested for 150mm internal dia of pipe.

Providing pre-cast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in landings, cover slab (for manholes etc) end similar articles set in CM (1:4), complete all as specified and directed.

M & L for TMT Bar 8mm dia bar and over cut to length, bent to shape required including cranking, bending, hooking ends, binding, with and including mild steel wire (annealed) not less than steel wire 0.9mm dia or securing with clips and confirming to FE 410-S and 310-0), complete all as specified and directed.

Excavation in trencehs n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for fdn/ deep for foundation of laying cable etc in any type of soil, complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc. 25cm, complete all as specified and directed.

Removing excavated material n.exc 50 mtr and depositing where directed at a leven n.exc 1.5 mtr abovee the starting point in any type of soil, complete all as specified and directed.

M & L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any position not specifically provided all as per directed by Engr-in-Charge.

Pre cast reinforced cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregates) as in manhole cover slabs and finishing the surface as per clause 4.11.16 and MES SSR Part 1

PCC 1:2:4 type B0 using 12.5mm graded stone aggregates as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles

S & F 100mm Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floor all as specified and directed by Engr-in-Charge.

Taking down carefully, copper / aluminium point wiring for light, fan, bell, socket or power socket etc complete with fittings such as switches, sockets, ceiling roses, pendant holders, bracket holder, light fittings, regulators etc, including making good to the disturbed surfaces to match with existing surface and colour shade with putty and white cement at necessary holes for smooth finishing complete complete, all as specified & directed.

Material and labour for point wiring complete with 1.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through PVC Conduit 20 mm dia medium grade including cutting, chasing work at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. metal flush box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of modular top cover plate as per numbers of switch modules for modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved coloures including 1.5 Sqmm PVC insulated multistranded FRLS type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface complete all as specified and directed for the following:- (a) One light point/fan /bell point controlled by one switch. Make of Cables: Havells, L&T, Finolex, Anchor (Note:- All necessary accessories such as modular steel box,top cover plate, blank plate, screws,washers and all modular electrical fixtures are to be used of same make/brand only and shall be deemed in to included in quoted rate only.)

All as per item no 118 above but for One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .

All as per item no 118 above but for One 5 pin 6 amps socket point controlled by one 6 amps switch on same board .

All as per item no 118 above but one light point controlled by two 2 way switches

All as per item no 118 above but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed.

S & F modular bell push 6Amps , 1/2 module, single pole, 240V, ISI Marked Complete all as specified and directed. Make ANCHOR (ROMA), HAVELLS (CRABTREE), LEGRAND

Supply & fixing modular type socket shuttered type 6A/16 Amps- 6 Pin combined shuttered socket 2/3 module with light indication, 240V, AC ISI Marked Complete all as specified and directed. Make ANCHOR (ROMA), HAVELLS (CRABTREE), LEGRAND

S & F modular type switch 6Amps , single pole, 1 way, 1/2 module, 240V, ISI Marked Complete all as specified and directed. Make ANCHOR (ROMA), HAVELLS (CRABTREE), LEGRAND

Supply & fix fan regulator modular type electronic, stepped type (01 to 4/5), 100 to 120 Watts, 240Volts, AC ISI marked complete all as specified and directed. Make ANCHOR (ROMA), HAVELLS (CRABTREE), LEGRAND

Supply & fix call bell AC, 230 Volts single pole, multi music type ISI marked complete all as specified and directed.

Supply & fix in replacement 1 x 10 W LED lamp of suitable size complete all as specified and directed. Make- Havells cat part No LHLDERUEML8X010 OR equivalent in Philips/ Crompton/ Bajaj/ Wipro/Syska LED/GE lighting/Surya.

Supply & fix angle lamp holder, insulated body with back plate for batten fittings complete all as specified and directed.

Supply & fix and in repair ceiling rose, 3 terminal, PVC\polycarbonate body ISI marked, complete all as specified and directed.

Supply & fix decorative box type 20 watt light fitting, blue coloured end caps, pre-wired and including providing single side LED tube rod 20 watt-01 No including PVC/Wooden round/square block-02 Nos and connected with LED fitting to ceiling rose and including removing old unserviceable fitting complete all as specified and directed.

Supply and fixing sheet metal enclosure made for DBs, protection class IP-36, phosphatised powder coated, double door when MCB's to be used, triple pole & neutral, 415 volts with 200 amps rated copper bus bar & neutral link earthing stud, 4 way, complete all as specified and directed.

S&F MCB triple pole & neutral, (SPN) 63 Amp, AC, 10 KA repturing capacity, ISI marked 415 Volt, 'C' series, including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified & directed.

Supply and fixing sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, conf to Cat Pt No 607711 of Legrand or equivalent of make Hager/Merlin Gerin multi-9 fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification (Note-MCBs will be measured separately).

Supply & fix and in repair MCB SP 6 to 32 Amps 10 KA,"C" series,AC, 240Volts, 50Hz, ISI marked complete all as specified and directed Make : Legrand, Schiender, Havells etc.

Supply & fix and in repair MCB SPN 32 to 40 Amps 10 KA,"C" series,AC, 240Volts, 50Hz, ISI marked complete all as specified and directed Make : Legrand, Schiender, Havells etc.

M&L for Sub main wiring with two runs of 4.0 Sqmm single core FRLS PVC insulated unsheathed, flexible upto and including 1100 volts grade with multistranded copper conductor drawn through in and including PVC surface conduit or casing caping of 20/30mm, 2.0 mm wall thickness (ISI marked) with all fittings and fixing accessories, surface type on walls, roofs etc including one run of 4.00 Sqmm FRLS PVC insulated copper conductor for earth continuity wire in green color including taking down carefully existing copper submain wiring with PVC surface conduit or casing caping and making good disturbed surfaces complete all as specified & directed by Engineer-in-Charge. Note:- Two runs of copper conductor 4.0 sqmm and one run of 2.5 Sqmm copper earth wire including PVC casing caping will be measured and paid as one unit only.

M&L for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr depth below normal ground level) with top edge of earth not less than 1.5 metre below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of steel bolts, nuts, check nuts and washers, test point made of GI strip 40x8mm, 10cm long PCC 1:2:4, type B-1 in pit with precast RCC 1:2:4 type B-1 in cover reinforced with XPM not less than 4 Kg per Sqm with 15mm bore GI light grade protection pipe, 20mm bore GI medium grade watering pipe with funnel including charcoal, dust, salt, all as shown in electrical plate No 3 of SSR Part-I (2009) with necessary earth work in any type of soil, removal to a distance not exceeding 50 mtr, including testing on completion, complete all as specified & directed. Note : (a) The cost of earth work, PCC pit of size shown in electrical plate No.3, funnel, watering pipe, wire mesh, charcoal, dust, common salt, 20mm bore medium grade watering pipe & 15mm bore light grade GI pipe as protection to earth lead wire etc shall be deemed included in the unit rate for earthing. (b) After completion, during testing, if the earth resistance equal or less 2 ohms is not obtained, earthing will be regenerated at no extra cost till the desired earth resistance is obtained.

Supply and fixing ceiling fans complete with blades. Down rods, electronic regulator and accessories, 230 volt, 1200mm sweep, min air delievery 210 CFM with service value 6 BEE five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Taking down old unserviceable Exhaust fan of any type/size from existing location and deposit in MES store yard and Supply and fix exhaust fan single phase metal body, AC 230 Volt, 50 Hz of size 300mm sweep with louvers shouter complete with all accessories including connecting up from ceiling rose to motor all as specified and directed. Make : Havells, Bajaj, Cromption etc.

Material & Labour for surface & wall mounted LED tube light fitting 10 W, 2 feet long extruded PVC housing provided for efficient heat dissipation to polycarbonate diffuser & integrated electronic driver with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make- Havells cat part No ENDURALINEARNEOBS10W LED865SPCWH OR equivalent in Philips/ Crompton/ Bajaj/ Wipro/Syska LED/GE lighting/Surya.

S & F in replacement of 35 Watt LED energy saving light fitting environment friendly long life LED street light made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK 07 with GI bracket made of light grade GI pipe 40 mm dia of 1.2 mtr long bend to shape with 02 Nos of FI clamp 32 x 4mm with suitable size nuts, bolts, washers etc. and making the connection from ceiling rose to fitting with suitable size twin core copper conductor cable complete all as specified and directed . (Make- Havells, cat part No ENDURACITYLITEPLATSL20WLED757SASYBOPC or Bajaj/Philips/Crompton Greaves or its equivalent).

Supply, laying and testing XLPE insulated, electric cable (heavy duty) with stranded aluminium conductor, 1100 volts grade, heavy duty cable, cross-sectional area 50 Sqmm 3.5 core connected with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed, laid in trenches or passing through pipes including taking down old existing unserviceable cable complete all as specified and directed. (Earth work, brick protection and sand cushioning shall be measured and paid for separately) Make POLYCAB, GLOSTER, GRANDLAY

Sand cushioning to under ground cable, laid in trenches 8cm thick below the cable and 15cm thick above the cable after laying and stretching the cable complete punned to 18cm, complete all as specified and directed. Note:- Punned thickness of sand will be measured and paid.

Brick covering with width equal to length of brick as mechanical protection to cable with well burnt sub class 'B' bricks laid dry flat.

M/s Sekinder Paul Sharma

M/s Kuldeep Kumar Sharma

JR CONSTRSTRUCTION CO.

M/S KARAN SINGH CONTRACTOR