8412 SPECIAL REPAIR TO TOILET OF ASHOK CHAKRA LIBRARY BLDG NO P 216 AND SPECIAL REPAIRS TO EXISTING DRAIN UNIT MANDIR AND FOREIGN OFFRS ACCN AREA AT AFMC UNDER GE (CENTRAL) PUNE

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), rand rubbish off the premises / out side of defence land complete all as directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, walls, aprons etc and rubbish off the premises / out side of defence land complete all as directed.

Material and labour for Non skid coloured ceramic tiles of size 400mm x 400mm x 7 to 8mm thick (Square / rectangular) over & including 15mm thick screed bed in CM 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles all as directed and specified.

M & L for coloured glazed ceramic tiles of size 450 x 300 x 7 to 8mm thick as in vertical surface set and jointed in neat cement slurry and pointed flush in white cement with pigment over and including 10mm thick baking coat of CM 1:4 complete all as specified.

M & L for Raking, cutting and waste on any thickness and size of tiles all as directed.

M & L 20mm thick granite (of any type) work table rubbed and polished in steps, jambs, pillars, window cills, cooking platforms, floor / skirting / risers or as in vertical support or counter top for wash basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite over and including 15 mm thick screed layer in CM 1:3 with edges polished / rounded as ordered incuding cutting circular or eliptical hole in granite slab and fixing in position complete and ensure best adhesion to surface complete all as specified and as directed.

M & L 20-25mm thick machine cut cudappah stone slab for vertical supports of kitchen platforms and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing of the exposed face complete all as directed and specified

Rounding to edges of stone slabs one edge, such as in steps, Cooking platform, and other similar situations complete all as directed

Taking down cement plaster on stone / Brick walls including raking out joints, hacking for key, scrubbing down with water complete all as directed.

M & L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished the surface even and Smooth without extra cement complete all as directed and specified.

M & L rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished the surface even and Smooth without extra cement complete all as directed and specified.

M & L for rendering 5 mm thick in CM 1:3 on ceiling surfaces finished the surfaces even & Smooth without using extra cement complete all as directed and specified.

M & L Preparation of newly plastered or unplastered surfaces of wall and applying three coats of white wash all as directed and specified.

M & L Preparation of newly plastered or unplastered surfaces of ceiling and applying three coats of white wash all as directed and specified.

M & L for preparation of newly plastered surfaces of walls and applying two coats of oil bond distemper over over one coat primer over a thin layer of wall care putty complete all specified and directed.

M & L for Complete removal of existing treatment of ceiling and applying a three coat of white wash complete all as specified & directed.

M & L for Complete removal of existing treatment of ceiling and applying two coats of oil bond distemper over coat of primer complete all as specified & directed .

M&L for Complete removal of existing treatment of walls and applying two coat of white wash complete all as specified & directed.

Taking down Chowkats or frames with shutters (Without taking of shutters from the frame) area not exc 1.5 Sqm & removing from site all as directed.

Taking down Chowkats or frames with shutters (Without taking of shutters from the frame) area exc. 1.5 Sqm but not exc. 4.00 Sqm & removing from site all as directed.

S & F 2nd class hard wood plain, solid, straight chowkats & frames , wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete complete all as specified & directed .

S & F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, both face is covered with decorative face veneer with lipping / frame to match all as specified and as directed.

S & F Solid PVC Double door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube fixed in opening all as shown in sketch of SSR Part-II complete all as specified and directed.

S & F Factory made solid PVC moulded door shutter with wood free EPS , 28 to 30mm thick (stiles) with 2, 4, or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face fixed in frame all as shown in sketch of SSR Part-II complete all as specified and directed.

S & F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8mm sheet metal CSK screws all as shown in sketch of SSR Part-II complete all as specified and directed.

S & F Factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x 19mm of MS pipe as stiffner fixed in frame all as shown in sketch of SSR Part-II complete all as specified and directed.

S & F 100mm long mild steel butt hinges medium weight , cold rolled all as specified & directed.

S & F 150mm long Aluminium powder coated handle, cast type all as specified and as directed.

S & F 150mm long Aluminium powder coated barrel tower bolt of extruded section all as specified and as directed.

S & F 300mm long Aluminium powder coated sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminiu alloy all as specified and as directed. .

S & F Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

Powder coated Powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, neoprene rubber packing, anodised aluminium snap beading, screws etc. complete all as specified. (Note :- Glass pane shall be measured and paid sepertely under relevant item)

Supply & Fix 4.00mm thick Figured glass, pinhead type area in squares not exc 0.5 Sqm each pane all as specified and directed.

S & F stainless steel wire 0.36mm nominal dia of wire and average width of aparture 1.40mm complete all as specified & directed .

S & F in repair stainless steel wire 0.36mm nominal dia of wire and average width of aparture 1.40mm complete all as specified & directed .

S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; door chowkats of angle or other section and similar works complete of Grade Fe-290 Grade E-165 including welding etc complete all as specified and as directed.

M & L preparation of new or previously untreated steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of a red oxide zinc primer complete all as specified and as directed.

Taking up or down 15mm bore dia steel tubing and connections including cleaning for refixing or removremoving from site complete all as directed.

Taking up or down 20mm bore dia steel tubing and connections including cleaning for refixing or removremoving from site complete all as directed.

Cutting chases, pinning in, and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing and including making good to facings where required cutting not exc 10 cm girth complete all as specified and directed.

Supply and Fix 15mm bore dia of CPVC pipes SDR 11 concealed & Plain CPVC SDR 11 fittings fixed to walls / ceiling or laid in floors / trenches including all required fittings complete all as specified.

Supply and Fix 20mm bore dia of CPVC pipes SDR 11 concealed & Plain CPVC SDR 11 fittings fixed to walls / ceiling or laid in floors / trenches including all required fittings complete all as specified.

S & F in repairs 15mm bore dia Gun metal globe or gate valves ISI Marked with iron wheel head screwed, both end for iron pipe complete all as specified and directed.

S & F in repairs 20mm bore dia Gun metal globe or gate valves ISI Marked with iron wheel head screwed, both end for iron pipe complete all as specified and directed.

S & F in repairs 15mm bore dia stop cock cast copper alloy, fancy type, chrominum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repairs 15mm bore dia bib taps cast copper alloy , chromoum plated , fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs Vitreous china coloured Wash Hand Basin Counter Top , Oval shape of Size 510mm x 405mm x 180mm with including replacement of 15mm bore dia swan neck pillar taps with right hand operating , 32mm dia SS waste coupling chromium plated and fixing brackets but excluding waste pipe complete all as specified.

S & F in repair vitreous China wash down water closet (pedestal pattern), white with including cast iron 'P' or 'S' trap and connection to trap , fixing bolts, seat cover and jet spray etc (excluding flushing cistern and flush pipe) complete connected to drain complete all as specified and directed.

Supply and fix in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440mm white, with integral foot rests including cast iron 'P' or 'S' trap and connection to trap (but excluding flushing cistern and flush pipe) includintg cement concrete bedding etc if required and including making good to floor complete all as specified and directed.

Supply and fix in repairs Vitreous China bowl urinal flat back, white of size of 465 x 355 x 265mm (minimum), with fixing accessories , fixing plugs, grating and union (Exclusive of supply & fixing of flushing cistern, trap and waste pipe) fixed to walls and connect complete all as directed and specified.

S & F in repairs plastic water closet seat cover black , closed pattern with flat bottom and cover and mild steel chromium plated or aluminum hinging device complete all as specified and directed.

S & F in repair 10 Litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed.

S & F in repairs chromium plated, Health faucet spray with 1.5m long flexible cord with hose and hook complete all as specified and directed.

Supply and fix in repairs 15mm bore dia Bib taps , two way type, cast copper alloy chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs 32mm bore dia PVC waste pipe for kitchen sink, WHB , Urinal etc complete all as specified and directed.

S & F in repairs 15mm PVC connections with PTMT nuts, length 450mm complete all as specified and directed.

S & F in repairs 20mm dia Brass, Chromium plated, Tubular towel rail, , D type, 60cm long between flanges complete all as specified and directed.

S & F in repairs Soap dish, Stainless steel or Chromium plated, fixed to plugs with chromium plated brass screws all as specified and directed.

S & F 1000 Litre capacity Rotational moulded polyethelene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position including all necessary GI fittings such as nipple, union / sockets etc and connecting up pipes etc including dismantling old water tanks complete all as specified and directed.

Cutting holes in to or through in brick or stone walls built in cement mortar and making good in CM 1:3 or cement concrete 1:2:4 , type B-1 as required area exc 150 Sqcm & not exc 400 Sqcm complete all as specified and directed.

Dismantling of cast iron RCC, AC or PVC pipe of any bore dia jointed in CM complete all as directed.

Supply and fix 75mm bore dia outlet PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as directed and specified.

Supply and fix 75mm bore dia outlet PVC (SWR) Multi floor trap with grating including jointing with solvent cement complete all as directed and specified.

S & F in repair 110mm bore dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as directed and specified.

S & F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as directed and specified.

S & F stack clamps suitable for 100mm bore dia pipe made out of 50mm x 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof complete all as directed and specified.

S & F 110mm bore dia PVC (SWR) bends with access door, any radius complete all as directed and specified.

S & F 75mm bore dia PVC (SWR) bends with access door , any radius complete all as directed and specified.

S & F 110mm bore dia PVC (SWR) bends , any radius complete all as directed and specified.

S & F 75mm bore dia PVC (SWR) bends , any radius complete all as directed and specified.

S & F 100mm bore dia PVC (SWR) vent cowl, complete all as directed and specified.

M& L for brushing neat cement slurry @ of 3.00 Kg of cement per Sqm all as directed.

M & L for rendering 15mm thick in cement motor 1:3 on concrete surfaces with using liquid water proofing chemicals surface finished even and Smooth without using extra cement complete all as directed and specified.

M & L for applying a coat of industrial bitumen 85/25 grade @ of 1.20 Kg/Sqm including cleaning the existing plaster / concrete surfaces of sunken portion complete all as directed and specified.

M & L for PCC 1:5:10 type E-2 using 40mm graded stone agreegates as in filling under floor complete all as directed and specified .

Demolition of cement concrete unreinforced in ground floors and pavings not exc 15cm thickness below or above ground level complete all as directed and specified .

M & L for 75mm thick Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregates as in sub base course complete all as directed and specified.

M & L for 25mm thick Cement concrete 1:2:4 type B-1 using 20mm graded stone aggregates as in sub base course complete all as directed and specified.

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in any type of soil in foul water position complete all as directed and specified.

Excavation in trenches not exc 1.50 Metre wide and not exc 1.50 Metre in depth for foundations, manholes , laying of cables , laying of pipes etc and getting out in any type of soil complete all as directed and specified.

Excavation in trenches not exc 1.50 Metre wide and not exc 1.50 Metre in depth for foundations, manholes etc and getting out in any type of soil in foul water condition complete all as directed and specified.

Excavation in trenches not exc 1.50 Metre wide , exc 1.50 Metre and not exc 3.00 Metre in depth for foundations, manholes etc and getting out inany type of soil in foul water condition complete all as directed and specified.

M & L for cement concrete1:4:8 , type D-2 , using 40mm graded stone aggregates as in foundations, filling and mass concrete complete all as directed and specified.

Dismantling of brick work or stone / boulders masonry, built in cement mortar including all quoins, arches, pillars etc. (but excluding ashlars facing, dressed stone work and precast concrete articles) complete all as specified and directed.

M& L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) grade D-5 and set in CM 1:6 complete all as specified and directed.

M & L cement concrete 1:2:4 , type B-1 using 40mm graded stone aggregates as in window cill, coping etc and similar works complete all as specified.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of 300mm bore dia complete all as specified.

M & L for 40mm thick cement concrete 1:2:4 , type B-1 using 20mm graded stone aggregates as in drain floors complete complete all as directed and specified.

Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred / stopped ends etc complete all as specified.

Extra for forming fair finished drain or channel 60 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred / stopped ends etc complete all as specified.

M & L 300mm dia RCC pipes class NP-2 with collars laid in treches and jointed in CM 1:2 and tested complete all as specified and directed .

M & L 600mm dia RCC pipes class NP-2 with collars laid in treches and jointed in CM 1:2 and tested complete all as specified and directed .

M & L for PCC 1:4:8 , type D-2 using 40mm graded stone aggregates as in bed to drain pipes including forming cradles for 300mm bore dia pipe complete all as specified and directed .

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soil complete all as specified and directed .

Removing the excavated surplus soils to a distance exceeding 50 Metre but not exceeding 250 Metre and depositing where as directed at a level not exceeding 1.5 Metre above the starting point complete all as specified and directed .

Cutting to road surfaces, taking out material of SDAC, BM, WBM etc and remoiving from site to a distance upto 500 Metre all as specified.

M & L for precast cement concrete 1:2:4 , Type B-1 using 20 mm graded stone aggregates as in cover slabs for man holes / drains etc and set in CM 1:6 complete all as specified and directed .

M & L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips all as specified and directed .

Taking down old unserviceable point wiring (light, fan, socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendants, regulators sockets, light fitting etc and making good disturbed surfaces of walls, floors, etc.complete all as directed.

Taking down MCBs and Industrial sockets etc and making good the disturbed surfaces complete all as specified.

Taking down exhaust fan of any sweep, keeping with safe custody , replacement of unserviceable 3 core PVC insulated, PVC sheated 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal , overhauling the exhaust fans, replace the condensor of suitable size, painting of exhaust fans complete with synthetic enamel paint by spray painting including filling cavities with filler one coat after cleaning all dust etc and and refixing the same to its originalposition in servicable conditions complete all as specified.

M & L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sqmm (Nominal area) single core, PVC insulated and unsheathed stranded FRLS H cable 1100 Volts grade, ISI-694 marked in PVC rigid conduits heavy duty ISI marked of suitable size totally concealed in wall / floor / roof including all accessories etc with Modular sunken boxes including modular frame / cover plate suitable for mounting switches / sockets etc and PVC insulated standed copper conductor 1.5 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified and directed for the following :- Note :- (i) Cutting in chases and pointing in will be done by contractor withou any extra cost. (ii) Making good of distrubed surfaces matching with existing finishes will be done by contractor without any extra cost. (iii) Rates quoted by the contractor shall deemed to be included of above provision.

(a) One light / fan point controlled by one, One-way switch complete all as specified

(b) One 5 pin 5 Amps socket outlet point controlled by one, one way switch on independent board complete all as specified.

One 5 pin 5 Amps socket outlet point controlled by one, one way switch on same board complete all as specified.

All as per Item No. 104 above but with stranded copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS H cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent board, including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly. Note :- Making good of disturbed surfaces will be done by contractor without any extra cost.

S & F Modular Switch flush type, single pole, one way, 230 Volts, 6/10 Amps complete all as specified..

S & F Modular Switch flush type, single pole, one way, 230 Volts , 15 Amps complete all as specified..

S & F Modular Socket outlet multipurpose Socket, 6 Amps , 2/3 pin , 230 Volts , combined flush type complete all as specified..

S & F Modular Socket outlet multipurpose Socket 6 Amps / 16 Amps , 2/3 pin 230 Volts, combined flush type complete all as specified..

S & F ceiling rose , surface bakelie type , ISI marked , three terminals complete all as specified .

M & L for sub main wiring complete with two single core 6 Sqmm 1100 Volts grade PVC insulated stranded copper conductor FRLS cable with continuous copper earth conductor of 6 Sqmm in and including non-metallic PVC conduit including all accessories including taking down old unserviceable / worn out sub main wiring of any type and size complete all as specified. Note :- (i) Making good of disturbed surfaces wiil be done by contractor without any extra cost. (ii) 2 Runs of 6 Sqmm conductor , one run of 6 Sqmm earth conductor and one run of PVC conduit 25mm dia shall be measured as one unit length

Supply and fix in replacement LED Tube light fittings wall / Ceiling mounted, 4 Feet, 20 Watt LED batten works automatically through motion detection within 5 Metre range and turn off within 30 seconds of non movement, polycarbonate tube light with very high efficiency provided with high efficient integral constant current LED driver 230 Volt complete with mounting batten including all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from ceiling rose to connector complete all as specified and directed .

Supply and fix in replacement LED Tube light fittings wall / Ceiling mounted, 2 Feet, 9/10 Watt LED batten works automatically through motion detection within 5 Metre range, polycarbonate tube light with very high efficiency provided with high efficient integral constant current LED driver 230 Volt complete with mounting batten including all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from ceiling rose to connector complete all as specified and directed .

Supply and Fix in replacement wall mounted LED tube light fitting 5 Watt, plastic batten with white acrylic cover, 230 Volts with integrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements provision of multistranded copper conductor of suitable size from ceiling rose to fitting complete all as specified and as directed.

S & F sheet metal enclosures single pole and neutral enclosure with a three pin and earth plug and socket complete with one MCB SP 20 / 32 Amps completeall as specified and directed .

S & F MCB SP rated capacity 5 to 32 Amps, 240 Volts , breaking capacity 10 KA, 'B' Curve complete all as specified and directed .

S & F for MCB SP / SPN of rated capacity 6 to 32 Amps, 240 Volts breaking capacity 10 KA, C-curve complete all as specified and directed .

Taking down old unserviceable / worn out HT/LT UG Cables of any type and size complete all as directed.

Supply, laying, testing & commissioning of LT cable XLPE insulated armoured heavy duty electric cable including end termination with necessary cable glands, lugs etc laid in trenches / poles / walls , passing through pipes etc ISI Marked (1100 Volt grade) with multistranded aluminiuim conductor, cross sectional area 70 Sqmm 3.5 Core including taking down old unserviceable / worn out LT UG Cables of any type and size complete all as specified

Supply, laying, testing & commissioning of LT cable XLPE insulated armoured heavy duty electric cable including end termination with necessary cable glands, lugs etc laid in trenches / poles / walls , passing through pipes etc ISI Marked (1100 Volt grade) with multistranded aluminiuim conductor, cross sectional area 35 Sqmm 3.5 Core including taking down old unserviceable / worn out LT UG Cables of any type and size complete all as specified

Supply, laying, testing & commissioning of LT cable XLPE insulated armoured heavy duty electric cable including end termination with necessary cable glands, lugs etc laid in trenches / poles / walls , passing through pipes etc ISI Marked (1100 Volt grade) with multistranded aluminiuim conductor, cross sectional area 10 Sqmm 4 Core including taking down old unserviceable / worn out LT UG Cables of any type and size complete all as specified

Supply, laying, testing & commissioning of HT cable , XLPE insulated, screended, PVC bedded, galvanised steel strip or wire armoured, electic power cable (heavy duty) with aluminium conductor, conforming to IS, 22 KV "E" grade, ISI marked, cross sectional area 95 Sqmm, 3 core laid in trenches / poles / walls , passing through pipes under road etc all as specified and as directed. Note for Item No 122 t0 125 :- (a) Excavation and earth work, PCC cable cover and protection pipe shall be measured and paid separately in respective items.

S & F cable route marker made out of PCC block 1:3:6 , type C-1 using 20mm graded stone aggregated of size 900 mm x 300mm x 100mm thick (45 Cm burried in ground) and properly painted as per approved colour brown (HT) and written both side with signal red colour paint (MES HT cable 22 KV) on route marker with including necessary excavation& earthwork, and PCC complete all as specified and as directed.

M & L Cable jointing kit for 22 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm complete all as specified.

Removing excavated material to a distance not exc 50 Metre and depositing where as directed at level not exceeding 1.5 Metre above the starting point all as specified & directed.

M & L 40mm bore dia light grade galvanized pipe with all fitting ISI marked, laid in trenches, under road / hard standing / roads or fixing on wall / pole / crossing nallah etc complete all as specified and as directed .

M & L for Reinforced concrete pipes class NP-2 of size 150mm bore dia in 1 RM each half round (for bottom and top ) all as directed. Note :- Two half round pipe (Bottom and top) will be measured as one RM.

M & L for Reinforced concrete pipes class NP-2 of size 80mm bore dia in 1 RM each half round (for bottom and top ) all as directed. Note :- Two half round pipe (Bottom and top) will be measured as one RM.

M & L cutting existing 80mm bore dia GI pipe and inserting of new Tee branch of suitable sizes with incuding necessary fittings such as nipple, socket, union etc complete all as directed

M & L cutting existing 50mm bore dia GI pipe and inserting of new Tee branch of suitable sizes with incuding necessary fittings such as nipple, socket, union etc complete all as directed

Taking down old unserviceable GI / CI pipe of any type and size complete all as directed

M & L 80mm bore dia medium grade galvanized pipe with all fitting ISI marked, laid in trenches / under floor or fixing on wall / pole / crossing nallah etc complete all as specified and as directed .

M & L 50mm bore dia medium grade galvanized pipe with all fitting ISI marked, laid in trenches / under floor or fixing on wall / pole / crossing nallah etc complete all as specified and as directed .

M & L 40mm bore dia medium grade galvanized pipe with all fitting ISI marked, laid in trenches / under floor or fixing on wall / pole / crossing nallah etc complete all as specified and as directed .

REKHA ELECTRICALS

L.T Associate

Parhar Enterprise

Suma Construction

M/s.BAJRANG CONSTRUCTION

M/S NAVNEET S MORDE