COMPLETION OF INCOMPLETE WORK AGAINST CA NO CE AF ALD BKT 32 OF 2017 18 PROVISION OF ADDITIONAL MT GARAGES AND ESSENTIAL FACILITIES AT AF STN BKT

Amount

SCHEDULE A PART I (BUILDING WORKS)

Construction of Block of Medium Vehicle Parking Garrages (Type "B"), for 16 Vehicles as Shown in drawing no CE/ALD/906-AR Sheet 1/10 and Other corrected drawings, complete and specified and as shown in drawings. NOTE:- Apron shall be measured and paid for seprately.

Construction of Block of Medium Vehicle Parking Garrages (Type "A"), for 08 Vehicles as Shown in drawing no CE/ALD/906-AR Sheet 2/10 and Other corrected drawings, complete and specified and as shown in drawings. NOTE:- Apron shall be measured and paid for seprately.

Construction of Block of Medium Vehicle Parking Garrages (Type "A"), for 06 Vehicles as Shown in drawing no CE/ALD/906-AR Sheet 3/10 and Other corrected drawings, complete and specified and as shown in drawings.NOTE:- Apron shall be measured and paid for seprately.

Construction of Block of Medium Vehicle Parking Garrages (Type "A"), for 03 Vehicles including PCC ramp as Shown in drawing no CE/ALD/906-AR Sheet 4/10 and Other corrected drawings, complete and specified and as shown in drawings.

Construction of Block of Medium Vehicle Parking Garrages (Type "A"), for 03 Vehicles as Shown in drawing no CE/ALD/906-AR Sheet 5/10 and Other corrected drawings, complete and specified and as shown in drawings. NOTE:- Apron shall be measured and paid for seprately.

Construction of Block of Medium Vehicle Parking Garrages (Type "A"), for 01 Vehicles including PCC ramp as Shown in drawing no CE/ALD/906-AR Sheet 6/10 and Other corrected drawings, complete and specified and as shown in drawings.

Construction of Block of Technical Office, MT Store, MTD Stand Bay and Changing room etc (G+1) including PCC ramp as Shown in drawing no CE/ALD/906-AR Sheet,7/10 to 10/10 and Other corrected drawings, complete and specified and as shown in drawings.

Construction of Sentry Box (S/S) complete and specified and as shown in drawings.

Schedule A Part-II ( Internal Water Supply)

Lump sum price worked out by the contractor for Internal Water Supply as listed in Sch ‘A’ Part II representing* _______% (_________________ percentage) above/below ** the lump sum price of Rs. 30815.40 inserted by MES in Sch ‘A’ Part II.

Schedule A Part-III ( Internal Eleectrification)

Lump sum price worked out by the contractor for Internal Electrification as listed in Sch ‘A’ Part III representing* _______% (_________________ percentage) above/below ** the lump sum price of Rs. 248725.80 inserted by MES in Sch ‘A’ Part III.

Schedule A Part-IV ( External Electrification}

Lump sum price worked out by the contractor for External Electrification as listed in Sch ‘A’ Part IV representing* _______% (_________________ percentage) above/below ** the lump sum price of Rs. 340893.82 inserted by MES in Sch ‘A’ Part IV.

Schedule A Part-V ( Road, Path, Hard Standing)

Lump sum price worked out by the contractor for Road, Path, Hard Standing as listed in Sch ‘A’ Part V representing* _______% (_________________ percentage) above/below ** the lump sum price of Rs. 5531023.50 inserted by MES in Sch ‘A’ Part V.

Schedule A Part-VI ( Sewage Disposal )

Lump sum price worked out by the contractor for Sewage Disposal as listed in Sch ‘A’ Part VI representing* _______% (_________________ percentage) above/below ** the lump sum price of Rs. 127652.62 inserted by MES in Sch ‘A’ Part VI.

Schedule A Part-VII (Fencing & Gate)

Lump sum price worked out by the contractor for Fencing & Gate as listed in Sch ‘A’ Part VII representing* _______% (_________________ percentage) above/below ** the lump sum price of Rs. 190318.68 inserted by MES in Sch ‘A’ Part VII.

Schedule A Part VIII (Excavation and Earthwork)

Lump sum price worked out by the contractor for Excavation and Earthwork as listed in Sch ‘A’ Part VIII representing* _______% (_________________ percentage) above/below ** the lump sum price of Rs. 99886.40 inserted by MES in Sch ‘A’ Part VIII.

Sch A Part IX (Miscellaneous Items)

Supply and fixing ceilling fan with down rod, 1400mm sweep with 3 blade, 5 star rarting and connecting up including provn of three core PVC insulated multi stranded flexible copper conductor cable of size1.5 Sqmm copper wire from connector to fan of length not less than 1.0 mtr complete all as specified and directed.Make-Usha/Crompton Greaves/Havells/Bajaj/Orient

Supply and fixing Exhaust fan of 300mm sweep, heavy duty, single phase 230V AC,900RPM,with louvered shutters including mounting frame and connecting the fan to ceiling rose including provision of three core flexible copper conductor cable of size1.5 Sqmm copper wire not less than 0.5m long for connection complete all as specified and directed. Make-Usha/Crompton Greaves/Havells/Bajaj/Orient

S& Fixing wall/surface mounted type LED light fitting complete with LED lamp of 1x 20/22 watt (4 ft), extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable. Make:_ Philips Cat No- BN 550 WLED 20-6500, Havells Cat No. LHEWEBP7IN1W020, Wipro Cat No. LL20-221-XXX-60-XX.

S & Fixing wall/surface mounted type LED light fitting for mirror light complete with LED lamp of 1x 10 watt (2 ft), extruted aluminium heat sink provided for efficient heat dissipation and intergrated electronic driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable. Make- Make:- Havells Cat No. LHEWEBP7PLINW010 or equivalent in Wipro, Bajaj, Philips as approved by GE.

Supply and fixing LED street light fittings 1x20/25 watt complete fitting having pressure dia cast aluminium housing with heat resistant toughened glass & IP 65 protection including fixing arrangement comprising of suitable size dia of GI pipe 40mm dia light grade 1.5 mtr long bend at 120 fixed to wall with 2 Nos clamps made of FI 50x6 mm and necessary nut, bolts and washers complete with all accessories duly connection with three core flexible copper cable all as specified and directed. Make- Make:- Philips Cat No. BRP020 1x 10 LED, Wipro Cat No. LR01-018-XXX-WH-XX, Havells Cat No. LHETAXU7PA6J025, Bajaj Cat No. BCLST 25W, CG Cat No. LSTO-25-CDL.

M&L for lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete including 5W LED all as specified and directed by Engr-in-Charge.

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less the 1.5 mtrs below normal ground level, connected to galvanized iron wire 4 mm as Earthing lead by means of bolts, nuts check-nuts, and washers of galvanized iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, GI pipe light grade 15mm bore for protection of GI wire from earth electrode to and including the earth test point of galvanized iron/steel of size 75x75x25mm, supplying and laying charcoal dust, common salt, PCC 1:2:4 type B1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B0 using 12.5 mm graded stone aggregate reinforced with 6mm dia round bars @ 75mm C/C both ways with MS handle 12mm dia, PGI funnel and wire mesh, 20mm dia pipe medium grade for watering all as shown in plate No 3 of SSR Part I of 2009 and connected to earth test point including testing complete all as specified and directed.

M & L earthing complete with Gl electrode 600x600x6.00mm thick buried directly in ground vertically in pit of depth not less than 2.25 mtr below normal ground level with top edge of the earth plate not less than 1.50 mtr below normal ground level connected to Gl strip 32 x 6 mm as earthing strip by means of bolts, nuts, check nuts and washers of iron connected including gun metal or phosphorus bronze of size 75x75x25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screwed all as specified including excavation and earth work and disposal of surplus soil incl 40 mm Gl tubing light grade and necessary fitting for protection of Gl strip incl laying of charcoal, dust and common salt, PCC (1:2:4) type B-l using 20 mm graded stone aggregate earth pit with 40x40x3mm MS angle iron frame and RCC cover 40mm thick (1:2:4) type B-0 using 12.5mm graded stone aggregate reinforced with 8mm dia round bar @ 75mm C/C both way with MS handle 20mm dia plastering 15mm thick CM (1:6:) internally and upto 150mm below ground level externally. PGI funnel with wire mesh 20mm dia Gl pipe for watering complete all as shown on electrical plate No.3 of SSR Part -1 2009 and connected in earth test incl testing completed all specified and directed.

S&F MCB TPN 4 pole 63 A, 415V volt complete all as specified and directed. Make - Legrand/ L&T / ABB

S&F MCB SPN 2 Pole 63 A, 240V volt complete all as specified and directed. Make - Legrand/ L&T / ABB

S&F MCB SP 6-30 A, 240V volt C curve 10 KA complete all as specified and directed. Make - Legrand Cat No603237 or equivalent make of L&T / ABB

Supply , installation , testing and commissioning of 16 mtr long high mast light system in two section of hot dip galvanized not less than 3mm thick with base plate of not less than 25mm thick, head frame galvanised lantern carriage, double drum winch suitable for 8 luminaires symmerically incl steel wire rope, foundation bolt nut washer anchore plate and lighting protection final with control gear box installed inside and templets. LED single dome aviation obstruction light incl PCC (1:3:6) type C-2 foundation earth work complete as per manufacturer recommendation all as directed and specified by Engr-in-Charge Make: CG/Bajaj/Philips.

Supply and fixing of LED light fitting of capacity 120 watt complete all as directed. Make: Crompton CG-LFLM-120-CDL/60/havells Cat No LHEPCZU7P46J120/ or equivalent make of Bajaj/Philips

Construction of brick masonay septic tank of 50 users capacity all as specified and shown in drawing including earth work in ordinary type soil, 150mm dia SGSW inlet and outlet pipes upto 3.0m from outer face of wall, RCC M-25 design mix in slab and precast RCC manholes covers, sludge chambers, reinforcement and CI vent pipe complete all as specified and shown on drawings. (TD/217 Sheet No.1/2 & 2/2)

Construction of soak well excavation of earth work in ordinary type of soil, PCC lean concrete in foundation, honey combed brick work and solid brick work in cement mortar in cm 1:4, PCC band, PCC and brick work in dwarf wallm form work to side and sofit of RCC slab, TMT bars in reinforcement and RCC M-25 design mix in cover slab of size 1.80m dia and 3.0m effective depth including RCC precast manhole cover including brick bats for filling complete all as specified and shown on drawing and directed. (TD/576 Sheet No.1/2 & 2/2)

B.K.ASSOCIATES

M/s DHARAM VIR GHAI

M/S Amar Enterprises

yash enterprises