Pre Fabricated Dwellings for Skill Development Centre at Banka Substation under CSR.

Name of Package : SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR..

Package No : NIT-456

Contract Period 3 Months

: Attachments : General guidelines for filling up the Attachments : CT Analyser -NIT-456 :

SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR..

Specification No.: 5002003906

1 Fill up only green shaded cells in the relevent attachments.

2 Attachments 3(QR), 4, 5, 6, 7, 9, 10, 11, 12, 13,14, 15, 16, 17 and Bid Form for 1st Envelope are included here.

3 Attachment 1 Bid Security : To be submitted as per proforma provided in the bidding document.

4 Attachment 2 Power of Attorney : No specific format is provided by POWERGRID. Bidder may use their own format.

5 Attachment 8 Manufacturer’s Authorisation Form : To be furnished as per proforma provided in the bidding document, on the letter head of the each Manufactures proposed to supply main items. This attachment is not included here.

6 Attachment 14 Integrity Pact : To be submitted as per ITB Clause No. 9.3(n) and as per remarks in the Attach 14-IP.

पावर ग्रिड कारपोरेशन ऑफ इण्डिया लिमिटेड

(भारत सरकार का उद्यम)

Power Grid Corporation of India Limited

(A Government of India Enterprises)

SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR..

5002003906 Individual Firm 1

Licensee of a Manufacturer 2

Enter following details of the bidder Representative of a Manufacturer

Specify type of Bidder [Select from drop down menu] #REF!

Name of Lead Partner

Address of Registered Office …….. …… ………. ……….

Name of Other Partner …….. …… ………. ……….

Printed Name …….. …… ………. ………. 01/Dec/25

Designation …….. …… ………. ……….

RFX No. :5002003906 Attachment-3(JV) NIT-456 #REF! NIT-456

SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR..

(Joint Venture Agreement and Power of Attorney for Joint Venture*)

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials #REF!

Name : Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. "Saudamini", Plot No. 2, Sector 29

…….. …… ………. ………. Gurgaon (Haryana) - 122001

Name(s) and Addresse(s) of other partner(s)

Name : #REF! #REF!

Address : #REF! #REF!

The Joint Venture Agreement (as per the proforma attached at no. 15 in Section-VI, Sample Forms and Procedures, Conditions of Contract, Vol.-I of the Bidding Documents) and Power of Attorney for Joint Venture (as per the proforma attached at no. 14 in Section-VI, Sample Forms and Procedures, Conditions of Contract, Vol.-I of the Bidding Documents) are enclosed herewith.

Date : Printed Name : …….. …… ………. ………. 0

RFX No. :5002003906 Attachment-3(QR) NIT-456

SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR..

(Qualifying Requirement Data)

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. Eastern Region Transmission System-I

…….. …… ………. ………. Vidut Board Colony,

…….. …… ………. ………. Shastri Nagar Patna 800023

For our Qualifying Requirements Data, please refer Schedule-QR of this volume.

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002003906 Attachment-4 NIT-456

SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR..

(Form of Certificate of Origin and Eligibility)

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. Eastern Region Transmission System-I

…….. …… ………. ………. Vidut Board Colony,

…….. …… ………. ………. Shastri Nagar Patna 800023

We hereby certify that equipment and materials to be supplied are produced in [Enter the name of country where from equipments & material shall be supplied] eligible source country. Equipments & Materials produced in [Name of countries] Company incorporated & registered in [Name of countries]

We hereby certify that our company is incorporated and registered in [Enter the name of country where from equipments & material shall be supplied] eligible source country.

Date : Printed Name : …….. …… ………. ……….

country. country. [Enter the name of country where from equipments & material shall be supplied] [Enter the name of country where from equipments & material shall be supplied]

RFX No. :5002003906 Attachment-4(A) NIT-456

SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR..

(List of Special Maintenance Tools & Tackles)

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. "Saudamini", Plot No. 2, Sector 29

…….. …… ………. ………. Gurgaon (Haryana) - 122001

We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles are included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:

Notwithstanding what is stated above, we further confirm that any additional special maintenance tools and tackles, required for the equipment under this package shall be furnished by us at no extra cost to the employer.

S.No. For Equipment Item Description Unit Quantity

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002003906 Attachment-4(B) NIT-456

SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR..

(List of Special Maintenance Tools & Tackles)

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. "Saudamini", Plot No. 2, Sector 29

…….. …… ………. ………. Gurgaon (Haryana) - 122001

We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles which are to be taken back after the completion of the work by us are not included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002003906 Attachment-5 NIT-456

SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR..

(Bought-out & Sub-contracted Items)

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. Eastern Region Transmission System-I

…….. …… ………. ………. Vidut Board Colony,

…….. …… ………. ………. Shastri Nagar Patna 800023

We hereby furnish the details of the items/ sub-assemblies, we propose to buy for the purpose of the subject Package:

Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details of the proposed sub-contractor/sub-vendor

Name Nationality

We hereby furnish the details of the items/ sub-assemblies propose to supply from our own works (i.e. as direct transactions) in additiona to the supplies the same from other vendors (i.e. as Bought-out transactions) as detailed in the table given above.

Sl. No. Item Description Quantity proposed to be supplied Details of the plant from where supplies are proposed.

Name of Plant Address

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002003906 Attachment-5 NIT-456

(Bought-out & Sub-contracted Items)

Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details of the proposed sub-contractor/sub-vendor

Name Nationality

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002003906 Attachment-6 NIT-456

SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR..

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. Eastern Region Transmission System-I

…….. …… ………. ………. Vidut Board Colony,

…….. …… ………. ………. Shastri Nagar Patna 800023

The bidder shall itemize any deviation from the Specifications included in his bid. Each item shall be listed (separate sheets may be used and enclosed with this Attachment) with the following information:

Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation

The above deviations and variations are exhaustive. We confirm that we shall withdraw the deviations proposed by us at the cost of withdrawal indicated in this attachment, failing which our bid may be rejected and Bid Security forfeited.

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002003906 Attachment-6 NIT-456

Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002003906 Attachment-7 NIT-456

SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR..

(Details of Alternative Bid)

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. Eastern Region Transmission System-I

…….. …… ………. ………. Vidut Board Colony,

…….. …… ………. ………. Shastri Nagar Patna 800023

No Alternative Bid

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002003906 Attachment-8 NIT-456

SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR..

(Manufacturer's Authorization Form)

Contracts and Materials

Power Grid Corporation of India Ltd.,

"Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001 Name of Manufecture Name/Description of Goods Factory Address Name & Address of Bidder package name alongwith project name

…(insert name of the Manufacturer) .. …(insert name and/or description of the goods) … ..(insert address of factory) .. SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR..

WE …(insert name of the Manufacturer) .. who are established and reputable manufacturers of …(insert name and/or description of the goods) …. having production facilities at ..(insert address of factory) .., , , do hereby authorize , …….. …… ………. ………., …….. …… ………. ………., …….. …… ………. ……….(hereinafter, the “Bidder”) to submit a bid, and subsequently negotiate and sign the Contract with you against IFB for SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR.. including the above plant & equipment or other goods produced by us. 0

WE …(insert name of the Manufacturer) .. who are established and reputable manufacturers of …(insert name and/or description of the goods) …. having production facilities at We hereby extend our full guarantee and warranty for the above specified goods offered supporting the supply by the Bidder against these Bidding Documents, and duly authorize said Bidder to act on our behalf in fulfilling these guarantee and warranty obligations.

We hereby extend our full guarantee and warranty for the above specified goods offered supporting the supply by the Bidder against these Bidding Documents, and duly authorize said Bidder to act on our behalf in fulfilling these guarantee and warranty obligations. We also hereby declare that we and have entered into a formal relationship in which, during the duration of the Contract (including warranty/defects liability). We, the Manufacturer or Producer, will make our technical and engineering staff fully available to the technical and engineering staff of the successful Bidder to assist that Bidder, on a reasonable and best effort basis, in the performance of all its obligations to the Purchaser under the Contract. ..(insert address of factory) .., , , do hereby authorize , …….. …… ………. ………., …….. …… ………. ………., …….. …… ………. ……….(hereinafter, the “Bidder”) We also hereby declare that we and have entered into a formal relationship in which, during the duration of the Contract (including warranty/defects liability).

For and on behalf of the …(insert name of the Manufacturer) .. to submit a bid, and subsequently negotiate and sign the Contract with you against IFB for SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR.. including the above plant & equipment or other goods produced by us. We, the Manufacturer or Producer, will make our technical and engineering staff fully available to the technical and engineering staff of the successful Bidder to assist that Bidder, on a reasonable and best effort basis, in the performance of all its obligations to the Purchaser under the Contract.

In the capacity of

Date : Printed Name : …….. …… ………. ……….

Note :1 The letter of Undertaking should be on the letterhead of the Manufacturer and should be signed by a person competent and having Power of Attorney to legally bind the Manufacturer. It shall be included by the bidder in its bid.

2 Above undertaking shall be registered or notarized so as to be legally enforceable.

RFX No. :5002003906 Attachment-9 NIT-456

SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR..

(Work Completion Schedule)

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. Eastern Region Transmission System-I

…….. …… ………. ………. Vidut Board Colony,

…….. …… ………. ………. Shastri Nagar Patna 800023

We hereby declare that the following Delivery Schedule shall be followed by us for the subject Package i.e., SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR.. for the period commencing from the effective date of Contract to us :

Sl. No. Description of Work Period in months from the effective date of Contract

1 Submission of drawings for Approval

2 Production of samples for type testing

3 Completion of type tests

4 Commencement of Commercial Production

5 Offer of material for pre-despatch testing and inspection

6 Commencement of shipment

1 Completion of shipment (Receipt at final destination Site)

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002003906 Attachment-10 NIT-456

SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR..

(Guarantee Declaration)

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. Eastern Region Transmission System-I

…….. …… ………. ………. Vidut Board Colony,

…….. …… ………. ………. Shastri Nagar Patna 800023

We conform that the equipments offered shall have minimum performance specified in Technical Specification. We further guarantee the performance/efficiency of the equipments in response to the Technical Specifications.

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002003906 Attachment-11 NIT-456

SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR..

(Information regarding Ex-employees of POWERGRID in our Organisation)

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. Eastern Region Transmission System-I

…….. …… ………. ………. Vidut Board Colony,

…….. …… ………. ………. Shastri Nagar Patna 800023

We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002003906 Attachment-11 NIT-456

SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR..

(Information regarding Ex-employees of POWERGRID in our Organisation)

Name of Other Partner To:

Contracts and Materials

Name : …….. …… ………. ………. Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. Eastern Region Transmission System-I

…….. …… ………. ………. Vidut Board Colony,

We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002003906 Attachment-12 NIT-456

SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR..

(Price Adjustment Data)

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. Eastern Region Transmission System-I

…….. …… ………. ………. Vidut Board Colony,

…….. …… ………. ………. Shastri Nagar Patna 800023

We hereby furnish the relevant details pertaining to the price adjustment provisions for equipment as specified in your specifications and documents for the SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR..The necessary documentary evidence are enclosed :

Sl. No. Name of Materials Value of co-efficient Name of the published index * Value of index as 30 days prior to date set for opening of bids as on **

1 EC grade aluminium ingots, co-eifciant a = 0.65 CACMAI

High Tensile Galvanised Steel wires , co-efficient b = 0.15 CACMAI FALSE FALSE

High Carbon Steel Rods , co-efficient b = High Tensile Galvanised Steel wires , co-efficient b =

High Grade Electrolytic Zinc , co-efficient c =

3 Labour, Co-efficient l= 0.05 Indian Labour Bureau, Shimla, Govt. of India (monthly) (Base: 2001 = 100) (www.labourbureau.nic.in)

Note: * Indicate the publisher of the index.

** Indicate the date of indices for which the values are being furnished.

^ For bidders who intend to quote their prices based on High Tensile Galvanised Steel wire, the coefficient for the same (i.e. coefficient ’b’ for High Tensile Galvanised Steel wire) shall be 0.15 and coefficient ‘c’ shall not be applicable.

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002003906 Attachment-13 NIT-456

SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR..

(Declaration regarding Social Accountability)

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. Eastern Region Transmission System-I

…….. …… ………. ………. Vidut Board Colony,

…….. …… ………. ………. Shastri Nagar Patna 800023

We conform that we stand committed to comply to all requirements of Social Accountability Standards i.e., SA8000 (latest Standard available at www.sa-intl.org) and maintain the necessary records.

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002003906 Attachment-14 NIT-456

SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR..

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. Eastern Region Transmission System-I

…….. …… ………. ………. Vidut Board Colony,

…….. …… ………. ………. Shastri Nagar Patna 800023

Bidders are required to submit 02 copy of Integrity Pact as per format enclosed at vol-I

Date : Printed Name : …….. …… ………. ……….

Instruction for printing & submitting Integrity Pact

1. The requisite format of Integrity Pact (if required)is attached in Vol-I of Bid Documents.

2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other seven pages on plain A4 size paper. Such two sets shall be prepared by the bidder.

3. All the pages of both the copies of the Integrity Pact shall be signed by the authorised representative of the bidder and duly stamped.

4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.

5. For further details bidders may please refer ITB Clause 9.3 (n).

Specification No. : 5002003906 Attachment-15 NIT-456

SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR..

(Information for E-payment, PF details and declaration for Micro/Small and Medium Enterprise)

Bidder's Name and Address (Sole Bidder [Individual Firm]): To:

Contracts and Materials

Name: 0 Power Grid Corporation of India Ltd.,

Address: …….. …… ………. ………. Eastern Region Transmission System-I

…….. …… ………. ………. Vidyut Board Colony,

…….. …… ………. ………. Shastri Nagar Patna 800023

We are furishing the following details of Statutory Registration Numbers and details of Bank for electronic payment

1 Name of the Supplier/ Contractor in whose favour payment is to be made

2 Address with PIN Code and State

Registered Office:

Correspondence Address:

3 Status- Company/others [Declaration of Micro/ Small/Medium Enterprtise ]

4 Permanent Account [PAN] No.

5 Goods & Services Tax [GST] No.

6 PF Registration No. Of the Company

7 PF Regional Office covered (with Address)

8 Name of Contact Person

9 Telephone No(s)

10 Bank Details for Electronic Payment

Name ofthe Bank:

Address of the Branch:

Type of Account: Savings/Current

11 9 digit MICR code printed at bottom in middle, next to cheque no.

12 IFSC (for RTGS)/NEFT Code (to be obtained from the Bank) Sample Cancelled Cheque to be enclosed

We hereby declare that the above information are true and correct and we agree that thepayment onaccount of this Contract, in the event of Award, be made in the above account maintained in theabove mentioned Bank.

RFX No. :5002003906 Attachment-16 NIT-456

SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR..

(Additional Information)

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : ……………………………… Eastern Region Transmission System-I

…….. …… ………. ………. Vidut Board Colony,

…….. …… ………. ………. Shastri Nagar Patna 800023

In support of the additional information required as per ITB Sub-Clause 9.3 (p) of the Bidding Documents, we furnish herewith our data/details/documents etc., alongwith other information, as follows (the stipulations have been reproduced in italics for ready reference):

1.0 The Bidder shall furnish

A certificate from their Banker(s) (as per prescribed formats in Form 16, Section-VI: Sample Forms and Procedures) indicating various fund based/non fund based limits sanctioned to the Bidder and the extent of utilization as on date. Such certificate should have been issued not earlier than three months prior to the date of bid opening. Wherever necessary the Employer may make queries with the Bidders’ Bankers. [Reference ITB clause 9.3(p)(i)]

1.1 In accordance with 1.0, certificate(s) from banker as per requisite format, indicating various fund based/non fund based limits sanctioned to the bidder or each member of the joint venture and the extent of utilization as on date is/are enclosed, as per the following details:

Name of the (Lead Partner) :

Name of the Banker by whom certificate issued

Date of certificate (should not be earlier than 3 months prior to date of bid opening)

Whether fund based/non fund based limits are indicated in the certificate

Whether extent of utilization is indicated in the certificate

1.2 The Bidder should accordingly also provide the following information/documents

(i) Details of Banker:

Address of Banker

Contact Name and Title

(ii) As per para 1.0, Authorization Letter(s) from the bidder addressed to the Banker(s), authorizing POWERGRID to seek queries about the bidder with the Banker(s) and advising the Banker(s) to reply the same promptly, is/are enclosed as per following details:

Sl. No. Letter Ref. Date Addressed to (name of the Bank)

2.0 Litigation History

The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years. A consistent history of awards involving litigation against the Bidder or any partner of JV may result in rejection of Bid. [Reference ITB clause 9.3(p)(ii)]

2.1 Details of litigation history resulting from Contracts completed or under execution by the bidder over the last five years

Year Name of client, cause of litigation/arbitration and matter in dispute Details of Contract and date Award for or against the bidder Disputed amount

3.0 Description of the plant for carrying out the work

Bidders should provide information of the plant(s) for carrying out the work including the proposal of manufacturing methods in sufficient detail to demonstrate the adequacy of the bidder’s proposals to meet the technical specification.

4.0 OTHER INFORMATION

4.1 Current Contract Commitments of works in progress

Bidders should provide information on their current commitments on all contracts that have been awarded, or for which a letter of intent or acceptance has been received, or for contracts approaching completion, but for which an unqualified, full completion certificate has yet to be issued.

Details of Contract Type of Conductor Ordered Quantity as per Contract Balance Quantity to be supplied as on Completion Period for balance quantity

Commencement Completion

4.2 Financial Data:

Details Actual (Previous five years) Projection for next five years

Total Liability

Current Liability

Profit before taxes

Profit after taxes

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002003906 Attachment-17 NIT-456

SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR..

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. Eastern Region Transmission System-I

…….. …… ………. ………. Vidut Board Colony,

…….. …… ………. ………. Shastri Nagar Patna 800023

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002003906 Bid Form 1st Envelope NIT-456 1 one 1 st 1 January

2 two 2 nd 2 February

BID FORM (First Envelope) 3 three 3 rd 3 March

4 four 4 th 4 April

Bid Proposal Ref. No. 5 five 5 th 5 May

Date : 6 six 6 th #VALUE! 6 June

7 seven 7 th #VALUE! 7 July

To: 8 eight 8 th #VALUE! 8 August

Contracts and Materials 9 nine 9 th #VALUE! 9 September

Power Grid Corporation of India Ltd., 10 ten 10 th 10 October

Eastern Region Transmission System-I 11 eleven 11 th 11 November

Vidut Board Colony, 12 twelve 12 th 12 December

Shastri Nagar Patna 800023 13 thirteen 13 th

14 fourteen 14 th

Name of Contract : SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR.. 15 fifteen 15 th

Dear Ladies and/or Gentlemen, Enter details here. 16 sixteen 16 th

1.0 Having examined the Bidding Documents, including Amendment Nos. dated 00/01/1900 the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial operation, Performance & Guarantee Test as per the provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently). the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial operation, Performance & Guarantee Test as per the provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently). 17 seventeen 17 th

2.0 Attachments to the Bid Form (First Envelope) Bank Draft 18 eighteen 18 th

In line with the requirement of the Bidding Documents, we enclose herewith the following Attachments: Enter details here. Pay Order 19 nineteen 19 th

(b) Attachment 2(NIT-456) : A power of attorney duly authorized by a Notary Public indicating that the person(s) signing the bid have the authority to sign the bid and thus that the bid is binding upon us during the full period of its validity in accordance with the ITB Clause 14. Please note that if bid validity is less than 07 (seven) months, your bid may be rejected Bank Guarantee (0) 21 st

(c) Attachment 3(NIT-456) : The documentary evidence that we are eligible to bid in accordance with ITB Clause 2. Further, in terms of ITB Clause 9.3(c) & (e), the qualification data has been furnished as per your format enclosed with the bidding documents Attachment-3(QR). 22 th

#REF! Applicable 23 th

#REF! Not Applicable 24 th

(d) Attachment 4(NIT-456) : The documentary evidence establishing in accordance with ITB Clause 3, Vol.-I of the Bidding Documents that the facilities offered by us are eligible facilities and conform to the Bidding Documents has been furnished as Attachment 4. 25 th

(e) Attachment 5(NIT-456) : The details of all major items of services or supply which we propose subletting in case of award, giving details of the name and nationality of the proposed subcontractor/sub-vendor for each item. 26 th

(f) Attachment 6(NIT-456) : The variation and deviations from the requirements of the Conditions of Contract, Technical Specification and Drawings (excluding critical provisions as mentioned at clause 6.0 below) in your format enclosed with the Bidding Documents, including, inter alia, the cost of withdrawal of the variations and deviations indicated therein. 27 th

(g) Attachment 7(NIT-456) : The details of Alternative Bids made by us indicating the complete Technical Specifications and the deviation to contractual and commercial conditions. [NOT APPLICABLE] 28 th

(h) Attachment 8(NIT-456) : Manufacturer’s Authorisation Forms. 29 th

(i) Attachment 9(NIT-456) : Work Completion Schedule. 30 th

(j) Attachment 10(NIT-456): Guarantee Declaration. 31 st

(k) Attachment 11(NIT-456): Information regarding ex-employees of Purchaser in our firm.

(l) Attachment 12(NIT-456): Filled up information regarding Price Adjustment Data as per the format enclosed in the bidding documents.[NOT APPLICABLE]

(m) Attachment 13(NIT-456): Declaration regarding Social Accountability.

(n) Attachment 14(NIT-456): Integrity Pact, in a separate envelope, duly signed on each page by the person signing the bid.[NOT APPLICABLE]

(o) Attachment 15(NIT-456): Information for E-payment, PF Details & declaration regarding Micro/Small & Medium Enterprises.

(p) Attachment 16(NIT-456): Additional Information.

(q) Attachment 17(NIT-456): Declaration.

3.0 We are aware that, in line with Clause No. 27.1 (ITB), our Second Envelope (Price Part) is liable to be rejected in case the same contains any deviation/omission from the contractual and commercial conditions and technical Specifications other than those identified in this First Envelope.

4.0 We confirm that except as otherwise specifically provided our Bid Prices in Second Envelope include all taxes, duties, levies and charges as may be assessed on us, our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Goods, in and outside of India.

4.1 100% of applicable Taxes and Duties, which are payable by the Purchaser under the Contract, shall be reimbursed by the Purchaser after despatch of goods on production of satisfactory documentary evidence by the Supplier in accordance with the provisions of the Bidding Documents.

4.3 We also understand that, in case of award on us, you shall reimburse to us octroi/entry tax as applicable for destination site/state on all items of supply. Further, Service Tax, if applicable, for the services to be rendered by us, the same is included in our bid price in Second Envelope.

4.4 We confirm that we shall also get registered with the concerned Sales Tax Authorities, in all the states where the project is located.

5.0 Construction of the Contract

5.1 We declare that we have studied clause GCC 2.1 relating to mode of contracting for Domestic Bidders and we are making this proposal with a stipulation that you shall award us the Contracts covering all goods and related services.

6.0 We have read the provisions of following clauses and confirm that the specified stipulations of these clauses are acceptable to us:

[a] Bid document Fee Clause 3.0 of SCC.

[b] Bid Security/ Bid Guarantee Clause No 13.0, ITB, Section -II, and cl. 4.0 of SCC, Section-IV, Volume-I.

[c] Terms of Payment Clause No.64.0, Conditions of Contract (GCC) & Clause 12.0, SCC

[d] Contract Performance Guarantee/Performance Security Clause No.14, Section GCC, Vol.-I, Conditions of Contract & Clause 13.0 of SCC, Section-IV, Vol-I.

[e] Liquidated Damages Clause No 11.0 of SCC, Volume-I

[f] Price & Price Basis Clause No 11.0 of ITB,

[g] Guarantee & Defect Liability Period Cl.No.45.0 & 46.0 Section. GCC, Vol. I, Conditions of Contract & Clause 9.0 of SCC, Volume- I

[h] Work schedule Clause No. 10.0 of SCC, Volume -I

Further we understand that deviation taken in any of the above clauses by us may make our bid non-responsive as per provision of bidding documents and be rejected by you.

7.0 We undertake, if our bid is accepted, to commence the work immediately upon your Notification of Award to us, and to achieve the delivery of goods and related services within the time stated in the Bidding Documents.

8.0 If our bid is accepted, we undertake to provide an Advance Payment Security and Performance Security(ies) in the form and amounts, and within the times specified in the Bidding Documents.

9.0 We agree to abide by this bid for a period of six (06) months from the date fixed for opening of bids as stipulated in the Bidding Documents, and it shall remain binding upon us and may be accepted by you at any time before the expiration of that period

10.0 Until a formal Contract is prepared and executed between us, this bid, together with your written acceptance thereof in the form of your Notification of Award shall constitute a binding contract between us.

11.0 We understand that you are not bound to accept the lowest or any bid you may receive.

12.0 Commissions or gratuities, if any, paid or to be paid by us to agents relating to this Bid, and to contract execution, if we are awarded the contract, are listed below:

Name and address of agent Amount and Currency Purpose of Commission or gratuity

(If none, state “none”)

13.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.

Thanking you, we remain,

Yours faithfully,

For and on behalf of

Date : Printed Name : …….. …… ………. ……….

Please provide additional information of the Bidder

Business Address :

Country of Incorporation :

State/Province to be indicated :

Name of Principal Officer :

Address of Principal Officer :

Note: Bidders may note that no prescribed proforma has been enclosed for Attachment 2 (NIT-456) : Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.

ElectronicForms™

View - Template of ElectronicForm™

To close this Screen, click on the [Close] button located on the bar above, or at the bottom of the Screen

Template of ElectronicForm™

Relevant Bid-Part Techical

ElectronicForm™ Template ID 7PG-2010-FT000010

Template Reference TECHNO-COMMERICIAL (First Envelope)

Template Description Tower Package NIT-456 RFX No. : 5002003906

SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR..

Bidders's Name #REF!

Section-2 (Outline of Requirements)

* 1 Integrity Pact Details

Submitted (Doc. Code No. DC-9008-April-2009-Rev-0) Yes

* 2 BID SECURITY DETAILS

2 (a) Submitted Yes

* 2 (b) Bid Security No.

* 2 (c) Issued by (Name of Bank)

* 2 (d) Bid Security Amount 0 0.00

* 2 (e) Valid upto

* 1. AUTHORIZED SIGNATORY (Sole Bidder / Lead Partner of JV)

1 (b) Designation …….. …… ………. ……….

2. AUTHORIZED SIGNATORY (Other Partner of JV)

(If Bidder is JV)

2 (a) Name #REF!

2 (b) Designation #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

23 Twenty Three

27 Twenty Seven

28 Twenty Eight

33 Thirty Three

37 Thirty Seven

38 Thirty Eight

73 Seventy Three

74 Seventy Four

75 Seventy Five

77 Seventy Seven

78 Seventy Eight

79 Seventy Nine

83 Eighty Three

87 Eighty Seven

88 Eighty Eight

93 Ninety Three

97 Ninety Seven

98 Ninety Eight

100 One Hundred

Name of the Package SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR.

SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR.

1 Fill only Green shaded cells in Details and Schedule-I.

2 All the cells in Summary will be auto filled, therefore no cell is required to be filled in that sheet.

3 Instructions ,if any will be displayed automatically after selecting the cell.

Click here to proceed.

पावर ग्रिड कारपोरेशन ऑफ इण्डिया लिमिटेड

(भारत सरकार का उद्यम)

Power Grid Corporation of India Limited

(A Government of India Enterprises)

SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR.

Enter the following details of the bidder

Name of the bidder

Alternative E-mail

SUPPLY AND INSTALLATION OF PREFABRICATED DWELLINGS FOR SKILL DEVELOPMENT CENTRE AT BANKA SUBSTATION UNDER CSR.

Schedule-I of Price Bid

Name of the bidder To,

Address Contracts and Materials Department

POWER GRID CORPORATION OF INDIA LIMITED

VIDYUT BOARD COLONY, SHASTRINAGAR, PATNA-23

S.no. DSR 2023 item no. Item Description Unit Qty. DSR 2023 Rate Base price excl. GST Amount excl. GST GST rate as per present prevailing Amount incl. GST

1 2.6 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge All kinds of soil. Cum 2866.50 177.50 150.42 431189.62 18% 77,614.13

2 2.26.1 Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials All kinds of soil. Cum 1433.25 126.80 107.46 154013.64 18% 27,722.46

3 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). Cum 105.60 6812.00 5772.88 609596.79 18% 109,727.42

4 5.1.2 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). Cum 256.57 9045.75 7665.89 1966827.09 18% 354,028.88

5 5.22.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 25656.87 107.85 91.40 2344994.08 18% 422,098.93

6 5.9 Centering and shuttering including strutting, propping etc. and removal of form for 0.00

i) 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete Sqm 226.33 392.15 332.33 75214.96 18% 13,538.69

ii) 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. Sqm 487.36 736.40 624.07 304145.42 18% 54,746.18

iii) 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 370.52 961.30 814.66 301847.18 18% 54,332.49

7 11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm. Sqm 941.00 1553.45 1316.48 1238810.55 18% 222,985.90

8 11.46.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm. Sqm 45.60 1623.05 1375.47 62721.25 18% 11,289.83

9 11.41A.3.1 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm. Sqm 82.35 1464.85 1241.40 102229.15 18% 18,401.25

10 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Sqm 242.42 1267.95 1074.53 260483.13 18% 46,886.96

11 6.1.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 20.00 7132.25 6044.28 120885.59 18% 21,759.41

12 6.12.1 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1:3 (1 cement : 3 coarse sand) Sqm 680.48 931.75 789.62 537319.69 18% 96,717.55

13 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. Sqm 680.48 104.80 88.81 60435.85 18% 10,878.45

14 13.4.1 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) Sqm 950.48 357.35 302.84 287842.40 18% 51,811.63

15 13.2.1 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand) Sqm 640.48 399.45 338.52 216813.34 18% 39,026.40

16 13.48A.1 Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. Sqm 1315.20 181.25 153.60 202016.95 18% 36,363.05

17 13.82.2 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats. Sqm 2073.80 137.45 116.48 241562.55 18% 43,481.26

18 13.8 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Sqm 2073.80 156.05 132.25 274251.26 18% 49,365.23

19 Existing LOA rate Providing & laying of 7mm PVC false ceiling with all fittings & fixing materials complete. Sqm 861.00 1584.45 1342.75 1156111.40 18% 208,100.05

20 26.86.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 45 x 70 mm Mtr. 132.60 705.85 598.18 79318.40 18% 14,277.31

21 26.87.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick Sqm 46.80 4346.70 3683.64 172394.54 18% 31,031.02

22 9.1.2 Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood. Cum 0.66 116520.30 98746.02 65468.61 18% 11,784.35

23 9.20.2 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Sqm 35.70 3167.95 2684.70 95843.91 18% 17,251.90

24 13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. Sqm 200.00 155.90 132.12 26423.73 18% 4,756.27

25 9.147.A5.1 Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 – Part 3 (ii) Sites with structure height more than 20m for all wind speeds. Three track three panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R2 series with frame (70mm & above) x (40mm & above) & sash (25mm & above) x(50mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre). Sqm 129.33 8748.35 7413.86 958833.99 18% 172,590.12

26 21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm). Sqm 129.33 1505.25 1275.64 164977.95 18% 29,696.03

27 21.8.1 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width. Mtr. 334.80 96.75 81.99 27450.76 18% 4,941.14

28 9.81.1 Providing and fixing bright finished brass handles with screws etc. complete: EA 50.00 256.65 217.50 10875.00 18% 1,957.50

29 21.13 Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. EA 24.00 528.85 448.18 10756.27 18% 1,936.13

30 9.74.1 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm EA 50.00 441.60 374.24 18711.86 18% 3,368.14

31 10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Kg 30000.00 133.70 113.31 3399152.54 18% 611,847.46

32 Rate Analysis Providing and fixing Onduline sheet of Unduline, Everest or equivalent make supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Sqm 1080.60 1178.00 998.31 1078768.47 18% 194,178.33

33 12.51.1 Providing and fixing unduline using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) Mtr. 99.30 532.35 451.14 44798.61 18% 8,063.75

34 12.51.6 Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Gutter (600 mm over all girth) Mtr. 198.60 1313.70 1113.31 221102.39 18% 39,798.43

35 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. Cum 1000.00 196.00 166.10 166101.69 18% 29,898.31

36 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zoneIII) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. Sqm 228.00 749.30 635.00 144780.00 18% 26,060.40

37 4.13 Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. Sqm 79.12 146.15 123.86 9799.48 18% 1,763.91

39 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) Cum 0.63 7878.50 6676.69 4172.93 18% 751.13

40 2.27 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. Cum 94.10 2123.75 1799.79 169360.06 18% 30,484.81

41 Derived from 11.2 Dry brick on flat flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks. Sqm 941.00 475.23 402.74 378975.79 18% 68,215.64

42 13.52.1 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work. Sqm 600.00 241.75 204.87 122923.73 18% 22,126.27

43 16.86.1 Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. With granite stone of area less than 0.50 sqm. Sqm 50.00 4746.20 4022.20 201110.17 18% 36,199.83

44 8.1.1.1 Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble.Area of slab upto 0.50 sqm Sqm 100.00 5742.56 4866.58 486657.63 18% 87,598.37

45 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Kg 300.00 772.40 654.58 196372.88 18% 35,347.12

46 26.42.2 Providing and fixing of external wall system on Light gauge steel frame work with outer face cement boards as per standard sizes fixed with self- drilling / taping screws / fasteners @60cm c/c of approved make. A groove of 2 mm to 3mm shall be maintained and grooves shall be sealed with silicon based sealant. The board shall be fixed in a staggered pattern. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm and. Internal face 12.5 mm thick gypsum plaster board fixed on cement board as per standard sizes fixed with self- drilling / taping screws / fasteners @ 60cm c/c of approved make, proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cost of frame work to be paid for separately). Outer face: Outer face having 8 mm thick cement bonded particle Board fixed on 10 mm thick cement bonded particle board. (Termite, Fire and Moisture Resistance) as per IS 14276:1995. Inner face:-12.5 mm thick gypsum plaster board conforming to IS 2095:2011 fixed on 8 mm thick cement bonded particle board (Termite, fire and moisture resistance) conforming to IS:14276:1995). Sqm 1363.20 3167.85 2684.62 3659672.14 18% 658,740.98

47 Supply, Installation, Testing and commissioning of CCTV Camera 0.00

i) Existing LOA rate POE Switch-10100-MBPS-8-PORTor equivalent Each 3.00 3971.40 3971.40 11914.20 18% 2,144.56

ii) POE Switch-10100-MBPS-16-PORTor equivalent Each 2.00 11517.06 11517.06 23034.12 18% 4,146.14

iii) NVR 32 Channel-HIK-Vision or equivalent Each 2.00 59570.97 59570.97 119141.94 18% 21,445.55

iv) Bullet Camra-HIKVISION-2MP-IP(OUTDOOR)or equivalent Each 5.00 2739.92 2739.92 13699.60 18% 2,465.93

v) Doom Camra-HIKVISION-2MP-IP(INDOOR)or equivalent Each 15.00 2660.49 2660.49 39907.35 18% 7,183.32

vi) 6U-RACK-DLINKor equivalent Each 1.00 5162.82 5162.82 5162.82 18% 929.31

vii) 2U-RACK-DLINKor equivalent Each 4.00 1985.70 1985.70 7942.80 18% 1,429.70

viii) HHD-6TB-SEGATE or equivalent Each 5.00 11517.06 11517.06 57585.30 18% 10,365.35

ix) DLINK Wire-305M or equivalent Each 5.00 6354.24 6354.24 31771.20 18% 5,718.82

x) PT-Z Camra(Rooftop) or equivalent Each 1.00 21842.69 21842.69 21842.69 18% 3,931.68

xi) Supplying of wires & medium class PVC pipes and laying of wires in medium class PVC pipes. Mtr. 300.00 621.61 621.61 186483.00 18% 33,566.94

xii) Installation and commissioning of above supplied CCTV & system LS 1.00 43939.41 43939.41 43939.41 18% 7,909.09

48 Supply and installation of Geyser all complete 0.00

i) Geyser of 25Ltrs. Of BAJAJ,HAVELLS,CROMPTON or equivalent make. Each 15.00 12640.00 12640.00 189600.00 18% 34,128.00

ii) Geyser of 10Ltrs. Of BAJAJ,HAVELLS,CROMPTON or equivalent make. Each 3.00 11460.00 11460.00 34380.00 18% 6,188.40

49 Supply and installation of Double door fridge of size- 48"x24"x72" 202 grade steel of Jonree, Whirlpool, LG,Samsung or equivalent make. Each 1.00 74200.00 74200.00 74200.00 18% 13,356.00

50 Supply and installation of deep freezer of size- 48"x24"x34" under counter 202 grade steel customised of Jonree, Whirlpool, LG,Samsung or equivalent make. Each 1.00 67790.00 67790.00 67790.00 18% 12,202.20

51 Supply and installation of wall clock: 0.00

i) Wall clock of size- 30cm diameter of TITAN make or equivalent. Each 5.00 1168.22 1168.22 5841.10 18% 1,051.40

ii) Wall clock of size- 39.35Cm diameter of TITAN make or equivalent. Each 9.00 1438.85 1438.85 12949.65 18% 2,330.94

52 Supply and installation of Television 0.00

i) Supply and Installation of Smart HD TV of size-43" 20W, Smart FHD TV, wide colour enhancer, Triple protection,USB Movie with two years warranty of make- of SONY,LG,SAMSUNG or equivalent make. Each 5.00 22640.63 22640.63 113203.15 28% 31,696.88

ii) Supply and Installation of Smart HD TV-50" 4K UHD TV, Crystal Display, HDR, 20W Sound,Q Symphony, 3 side Bazel less design, Motion Xceletor, Universal Guide, TV Plus, Tap view, Smart Broser, PC on TV, Music system with Two years warranty of make-SONY,LG,SAMSUNG or equivalent. Each 1.00 40429.69 40429.69 40429.69 28% 11,320.31

53 Supply and installation of split AC all complete: 0.00

i) 1.5 TR 3 star/TS inverter Split Air-conditioner with R32 Refrigerant of make-Hitachi, Daikin,Voltas, Carrier,Blue star or equivalent Each 33.00 39499.00 39499.00 1303467.00 28% 364,970.76

54 Supply and installation of 30L mini Refrigerator Qube personal cooling solution with teo years warranty of make- Whirlpool, LG, Godrej, Samsung or equivalent. Each 4.00 6578.39 6578.39 26313.56 18% 4,736.44

55 26.23.1 Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on inter-locking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile (white/black),comprising of main-T runners of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles. Sqm 100.00 2630.40 2229.15 222915.25 18% 40,124.75

56 12.41.2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter Mtr. 100.80 377.40 319.83 32238.92 18% 5,803.00

57 12.43.2 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4coarse sand) and making good the wall etc. complete. 110 mm. Each 84.00 371.30 314.66 26431.53 18% 4,757.67

58 LETTERING 0.00

i) Supply and Installation of Back lit acrylic letters with LED fittings as directed by Engineer-in-charge. Per Inch 100.00 170.00 170.00 17000.00 18% 3,060.00

ii) Providing and fixing brass letters as directed by Engineer-in-charge. Per Inch 100.00 90.00 90.00 9000.00 18% 1,620.00

59 WUXGA 8,000 (1920 * 1200 pixels), High brightness 3 LCD laser projector offer stunning image quality, 85% corner to corner zone ratio, 2,304,000 (1920* 1200) pixels * 3,20,000 hours (NORMAL/QUIET)/24,000 hours (ECO) HDMI IN-HDMI 19-pin * 3 (Compatible with HDCP 2.3, Deep colour, 4K/60p*5 signal input) , CEC supported, operating temperature: 0-45⁰C (32-113⁰F)*10 Approved make -SONY/PANASONIC/CHRISTIE NO 1.00 402500.00 402500.00 402500.00 18% 72,450.00

60 Heavy Duty Ceiling Mount Kit NO 1.00 8483.00 8483.00 8483.00 18% 1,526.94

61 180 inch Fiber glass ME Tubular Screen with RF remote & LVC, Aspect Ratio - 16:10 NO 1.00 146377.00 146377.00 146377.00 18% 26,347.86

62 Trolley for above display NO 1.00 22625.00 22625.00 22625.00 18% 4,072.50

63 2- way Loudspeaker system with 1 * 12" LF, Frequency response (+-3 dB): 43 Hz - 18 Hz, Frequency Range ( -10dB):37 Hz- 20kHz, Coverage Pattern : 120⁰ * 60⁰ , Crossover modes : Bi-amp/ Passive switchable, Passive Crossover frequency: 1.5kHz, Passive mode power: NO 300W (1200W peak), SPL : 127dB peak, System sensitivity ( 1 W @ 1m ) : 96dB SPL, nominal impedance: 8ohms, input connector : NL4 Neutrik Speakon, barrier strip terminals, approved make - JBL/BOSE/B&W NO 1.00 120130.00 120130.00 120130.00 18% 21,623.40

64 Wireless handheld microphone system, wireless microphone system with MHZ career frequency band up to 16 pre programs frequencies with the same frequency band, Audio bandwidth 35-20,000 Hz, THD at 1 kHz :< 0.3% ( Receiver), Signal -to-noise : 120 dB (A) ( Receiver),wideband FM modulkation,upto 48 simultaneous channels, upto 14 hours operation with one single A A battery or better , Pilot tone,transmission to know the transmitter battery status, receiver should have microphone and line level output, transmitter should have display to show the battery and LED to show the muted/unmuted status, sensitivity 6.3 dB V/-100 dBm,should have microprocessor -controlled diversity,T.H.D,:0.7%(transmitter),infrared programmable ,RF output power:10 or 50 mW. NO 1.00 41920.00 41920.00 41920.00 18% 7,545.60

65 8 port Gigabit Poe Unmanaged Switch Approved make - CISCO/Netgrear/Airpro NO 1.00 11430.00 11430.00 11430.00 18% 2,057.40

66 Providing and fixing of factory assembled 50mm thick Puff(overall average density 40Kg/Cum+/- 2Kg/Cum as per IS:11239 part-2) sandwitched panels shall be provided. Panels shall be made of puff insulation sandwitched between twoo high tensile steel sheets each of 0.5mm thickness. Sheets shall confirm to ASTM 792M with minimum yield strength of 340 MPA. External coating in SMP and colour in standard RAL shade, crest height 34.5mm spaced at 250 mm intervals, two baby ribs in between the valley. Sqm 50.00 1265.00 1265.00 63250.00 18% 11,385.00

67 Providing and fixing of factory assembled 50mm thick Puff(overall average density 40Kg/Cum+/- 2Kg/Cum as per IS:11239 part-2) sandwitched panels shall be provided. Panels shall be made of puff insulation sandwitched between twoo high tensile steel sheets each of 0.5mm thickness. Sheets shall confirm to ASTM 792 M with minimum yield strength of 340 MPA. External coating in SMP and colour in standard RAL shade, Outer rib type: Micro Ribbed & Inner Rib Type:Micro ribbed. Sqm 50.00 1252.35 1252.35 62617.50 18% 11,271.15

68 17.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid . Each 34.00 8006.60 6785.25 230698.64 18% 41,525.76

69 17.7A Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer. Each 34.00 3960.55 3356.40 114117.54 18% 20,541.16

70 18.64 Providing and fixing PTMT swivelling shower, 15mm nominal bore, weighing not less than 40 gms. Each 34.00 121.40 102.88 3497.97 18% 629.63

71 17.34.1 Providing and fixing toilet paper holder :C.P. brass Each 5.00 803.70 681.10 3405.51 18% 612.99

72 17.10.1.2 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board- 510x1040 mm bowl depth 225 mm. Each 5.00 7514.65 6368.35 31841.74 18% 5,731.51

73 17.22B Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia Each 34.00 6940.75 5881.99 199987.71 18% 35,997.79

74 18.56.1 Providing and fixing PTMT pillar cock of approved quality and colour. 15mm nominal bore, 107 mm long, weighing not less than 110 gms. Each 5.00 208.45 176.65 883.26 18% 158.99

75 18.49.1 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore Each 68.00 506.80 429.49 29205.42 18% 5,256.98

76 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. Each 34.00 1034.80 876.95 29816.27 18% 5,366.93

77 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. Each 34.00 1083.50 918.22 31219.49 18% 5,619.51

78 Supplying and fixing approved make UPVC multi inlet floor trap with 100 mm dia outlet and C.P. cover on top etc., complete with cement concrete support around the floor trap. Each 102.00 627.73 627.73 64028.46 18% 11,525.12

79 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 0.00

80 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 0.00

80 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 0.00

81 18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 0.00

82 19.4.1.1 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. Each 34.00 2707.65 2294.62 78017.03 18% 14,043.07

83 Supplying, laying, jointing, testing and commissioning approved make UPVC pipes SWR grade B confirming to IS 13592 with rubber ring joints confirming to IS 5382. The quoted rate shall include necessary fittings like Tees, Bends, Offsets etc., including M.S angle with G.I clamps complete. 75 mm dia. Mtr. 136.00 500.61 500.61 68082.96 18% 12,254.93

84 Supplying, laying, jointing, testing and commissioning approved make UPVC pipes SWR grade B confirming to IS 13592 with rubber ring joints confirming to IS 5382. The quoted rate shall include necessary fittings like Tees, Bends, Offsets etc., including M.S angle with G.I clamps complete. 110 mm dia. Mtr. 102.00 557.98 557.98 56913.96 18% 10,244.51

85 Supplying, laying, jointing, testing and commissioning approved make UPVC pipes SWR grade B confirming to IS 13592 with rubber ring joints confirming to IS 5382. The quoted rate shall include necessary fittings like Tees, Bends, Offsets etc., including M.S angle with G.I clamps complete. 160 mm dia. Mtr. 25.00 1032.27 1032.27 25806.75 18% 4,645.22

86 17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. Each 34.00 168.35 142.67 4850.76 18% 873.14

87 8.5 Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. Each 10.00 978.70 829.41 8294.07 18% 1,492.93

88 18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore. Each 60.00 574.30 486.69 29201.69 18% 5,256.31

89 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Each 34.00 1607.95 1362.67 46330.76 18% 8,339.54

90 17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. Each 34.00 708.95 600.81 20427.37 18% 3,676.93

91 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. Each 5.00 231.95 196.57 982.84 18% 176.91

92 17.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern. Each 5.00 6258.75 5304.03 26520.13 18% 4,773.62

93 8.10.2 Providing and fixing 75 mm high, 50 mm deep and 18 mm thick stone slab table rubbed, edges rounded and polished, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.Granite Stone of approved shade Sqm 5.00 4051.85 3433.77 17168.86 18% 3,090.39

94 14.80.2 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.Orissa pattern W.C Pan of size 580x440 mm Each 5.00 4478.75 3795.55 18977.75 18% 3,416.00

95 12.42.6.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.:Shoe (Plain)-110 mm Shoe Each 28.00 131.85 111.74 3128.64 18% 563.16

96 12.42.5.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5°-110 mm bend Each 28.00 150.35 127.42 3567.63 18% 642.17

INTERNAL ELECTRIFICATION 0.00

97 2.3.3 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator): 12 way , Double door. Each 10.00 2315.00 2066.96 20669.64 18% 3,720.54

98 Supply and laying of Power Cables 0.00

i) SOR Mar'24 1.1KV GRADE 3.5CX70 SQMM (PVC) POWER CABLE RM 3000.00 311.78 311.78 935327.76 18% 168,359.00

ii) SOR Mar'24 1.1KV GRADE 4CX10 SQMM (PVC) POWER CABLE RM 500.00 125.84 125.84 62920.62 18% 11,325.71

99 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. 0.00

100 2.19 Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. Each 33.00 2590.00 2312.50 76312.50 18% 13,736.25

101 Existing LOA supply + DSR22(1.35) installation Supply and installation of 8W tube light of Havells/Crompton/Bajaj/Philips or equivalent make. Each 40.00 292.44 292.44 11697.60 18% 2,105.57

102 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 0.00

103 1.24.6 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket outlet. Each 25.00 148.00 132.14 3303.57 18% 594.64

104 5.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. Each 10.00 6855.00 6120.54 61205.36 18% 11,016.96

105 5.8 Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) Mtr. 100.00 972.00 867.86 86785.71 18% 15,621.43

106 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 0.00

107 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 0.00

v) 1.24.6 Telephone socket outlet Each 20.00 148.00 132.14 2642.86 18% 475.71

108 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. Mtr. 50.00 47.00 41.96 2098.21 18% 377.68

109 1.53 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 0.00

110 17.1.2 Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. Each 30.00 1071.00 956.25 28687.50 18% 5,163.75

111 17.1.6 Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. Each 40.00 557.00 497.32 19892.86 18% 3,580.71

112 1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 0.00

113 Delhi Jal board(20.1.2)+DSR'22(1.44) Supply, Installation, testing and commissioning of 1200 sweep ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. Each 48.00 1775.18 1775.18 85208.57 18% 15,337.54

114 Delhi Jal board(20.2.1)+DSR'22(1.50.1) Supply and Installation of 300mm exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Each 30.00 2475.79 2475.79 74273.57 18% 13,369.24

115 Delhi Jal board(19.9.2)+DSR'22(1.41) Supply and Installation, testing and commissioning of LED decorative diffuser 2x2 panel light FLAT 2X2PLR 36/40W pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. Each 60.00 2839.93 2839.93 170395.71 18% 30,671.23

116 Delhi Jal board(19.1.2)+DSR'22(1.41) Supply and Installation, testing and commissioning of pre-wired , Decorative ultra slim LED tube lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack. Lamp Type Order fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.20 W LED 6000 K Each 90.00 365.89 365.89 32930.36 18% 5,927.46

117 Supply and installation of solar light for roof top terrace make- D-light power controls/Geeta or equivalent. Each 32.00 5672.13 5672.13 181508.10 18% 32,671.46

118 Supply and installation of Bollard for park lighting Model no.MAMBOOBLS8WLED830PSYMTOPC(0.6M) Make Havells or equivalent. Each 25.00 5672.13 5672.13 141803.20 18% 25,524.58

119 SOR Mar'24 Supply and installation of Wall Mounted fan 400mm sweep. Make- Havells, crompton, bajaj, Philips or equivalent. Each 47.00 2244.44 2244.44 105488.68 18% 18,987.96

120 SOR Mar'24 Supply and installation of 4.5 kg CO2 type Portable Fire extinguisher. Each 8.00 9125.00 9125.00 73000.00 18% 13,140.00

121 SOR Mar'24 PORTABLE FIRE EXTINGUISHER-DCP TYPE 4.5/5 KG Each 8.00 6086.52 6086.52 48692.16 18% 8,764.59

122 Supply and fixing of first aid box. Each 4.00 1000.19 1000.19 4000.76 18% 720.14

123 Supply, installation, testing and commissining feeder pillar, supply of LT kiosk outdoor type, IP55 stand/floor/plinth mounted powder coated made out of 16SWG CRCA steel sheet for body and 14SWG CRCA steel sheet for door, sectionalised copper bus bar with bus coupler cum breaker & two incomer,earthing bus bar consisting of following components: Set 1.00 350000.00 350000.00 350000.00 18% 63,000.00

Incomer-(2 nos. incomer circuit breaker and 1no. Bus coupler circuit breaker)

400A 4P MCCB 50 KA- 3no.

100A TPN MCCB-13no.

Voltmeter 0-500V Analog with selector switch, phase indicating LED lamp,Ameter with CT, HRC backup fuse etc complete.- 2 set

124 Supply, installing, testing and commissining meter DB, supply of LT kiosk indoor type, stand/floor/plinth mounted powder coated made out of 16SWG CRCA steel sheet for body and 14 SWG CRCA steel sheet for door, 100A copper busbar consisting of following components. Set 1 50000 50000 50000 18% 9,000.00

100A TPN MCCB 50kA- 3no.

40A DP MCB- 8 No.

Voltmeter 0-500V Analog with selector switch, phase indicating LED lamp,Ameter with CT, HRC backup fuse etc complete.- 3 set

Single phase energy meter-8no.

125 CPWD PAR'23 Consultancy services for designing and planning of project LS 1 287264.06 287264.06 18% 51,707.53

Above and below (in %): To be quoted by bidder

Quoted Price excl. taxes 32,349,601.17

Total quoted GST 5,968,638.19

Total amount including taxes 38,318,239.36

Note: (I) Bidders may please note that the percentage low/high quoted by the bidder in their bid with respect to the estimated value mentioned shall be considered proportionately on arriving the rates of each individual items of the BOQs enclosed as Annexures against each line item.

(II) In case of "At Par", "0.00%" to be quoted by the bidder.

Date Printed name

Place Designation