Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.7 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹31.0 L+₹2.3 L (7.94%)Rejected-Finance | L2 | Rejected-Finance BEING L2 | |
| 3 | L3₹31.6 L+₹2.9 L (9.97%)Rejected-Finance | L3 | Rejected-Finance BEING L3 | |
| 4 | L4₹31.9 L+₹3.1 L (10.9%)Rejected-Finance 60 MADHUVAN BANK COLONY ALWAR | L4 | Rejected-Finance BEING L4 | |
| 5 | L5₹31.9 L+₹3.1 L (11.0%)Rejected-Finance | L5 | Rejected-Finance BEING L5 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
30 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE HISAR
HQ CWE HISAR HISAR MIL STN HISAR
CERTAIN REPAIR TO JOINERY, KITCHEN CABINATE, CUPBOARD AND OTHER MISC ITEMS IN MD ACCN UNDER THE AOR OF AGE B/R-II AT ITARANA CANTT ALWAR
2023_MES_630847_1
CWE/HSR/ALW-38 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
ALWAR MILITARY STATION
AS PER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE ALWAR
₹60,000
17 Jan 2024
2 Dec 2023
2 Jan 2024
2 Dec 2023
30 Dec 2023
16 Dec 2023
Amount
Taking down chowkats or frames with shutters (without taking off shutters frome the frames) n exc 1.5 but each complete all as specified & directed.
Taking down chowkhat with shutter without taking off shutter from the frame exc 1.5 Sqm and not exc 4 Sqm each.
Taking down shutter of any description exc 01 sqm but n exc 2 sqm each and removing from site complete all as specified and direct
M&L for mild steel framed work as in door frames and gauge shutters made of angle or hallow/square/rectangular/circular section and other covering door to be prepared for handing or sliding with including either hooks , purposely made sliding door bolt , hinges or handles fittings (exclusIve of steel or othr covering, running rails and guides) and hanging also fastening and fixing , necessary arrangements for fixing of wiremesh, necessary bolting including welding comlete conforming to FE-290 Gde E-165. Wire gauge will be measured and paid separately
S&F 35 mm thick Factory made plain panelled shutters (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003(part 1) kitn seasoned and chemically pressure treated.
S&F factory made 30mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
M&L for factory made 2nd class hard wood glazed and skelton door shutter made out of 35mm thick 2nd class hard wood, klin seasoned and chemically pressure treated & open reabted and prepared to receive glass/gauge etc (without sash bars), edges of framing plain,chamfered of rounded, fitted with and mitred beads for securing glass etc compelte, the SIze of members of shutter shall be as per IS-1003. The shutter shall be fitted to the chowkhats as directed by Engr-in-Charge.
S&F factory made Box type steel window 1.25mm thick box type ERW hollow P section of size 60mm x25mm single rebated comprise of gauged skelton shutter ERW size 50mmx20mm and 1.25 mm thick with two openable leaf consisting two Nos sash bars of T- section 20mmx3mm welded to frame with one vertical mullion of ERW box type T- section of size 60mmx25mm and 1.25 mm thick including cutting holes and making good dismantled portion with PCC (1:2:4) type B-1 (four Nos for each window)including following fittings weled to frmae shutter:- (a) Hold fast 150mm long of 12mm x3mm made to shape -04 Nos per window. (b)Handle of z section 20mmx25mm, 100mm long - 01 Nos per leaf. (c) MS Tower bolt 150mm long -02Nos per leaf. (d) Z-section 20mmx25mm 100mm long 01 Nos per leaf.(e) MS pintol hinges of size 75mmx12mm-02 Nos per leaf. Note :(i) Fabrication & fixing shall be as per TD Drawing (ii) Wire mess and painting shall be measured and paid separatly under respective items.
All as per item No 8 above but window with glazed shutter
S&F in repair factory made steel ventilator (Box type) with side hung shutter including hinges, stel peg stay , handle and peg stay complete with glazing bars dovetailed or welded incl fixing of lugs in PCC 1:2:4 type B1 using 20mm graded sone aggregate and making good walls and ceils to match the existing complete all as specified and directed
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples to wooden/steel frames with beading complete all as specified & directed.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane complete all as specified and directed.
S&F 3mm thick sheet glass ordinary quality fixed with oil putty to metal frame including hacking out old broken glass (in any description) from metal frame complete all as specified and directed
S&F frame work such as grills,gratring etc,with ends of bars shouldered &/or riveted or forged into spikes,framed guard bars, barred iron door ladder,frame balusters,walk ways, railing,frame work or water tanks, cooler stand & SImilar work conforming to Fe-290 Gde E-165.
S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a VC sheet strip of 20mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rails & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame weled/ sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification & drawing
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing
S&F 100mm Butt hings of extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed, type C-21.
S&F Aluminum anodised, barrel tower bolts of extruded section and fixed 150 mm long
S&F extruded aluminium alloy handles 125mm size fabricated type anodized ISI marked.
S&F 200 mm aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified.
S&F 150 mm extruded aluminium anodised alloy handle fabricated type complete all as specified.
S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete
S&F mild steel butt hinges medium weight colod rolled of size 100mm, ISI marked complete all as specified and directed.
S&F Aluminium sliding door bolt with hasp,staple (bolt type) 300mm long not less than 12mm dia with and incl minimum of 06 bolt and nuts four on bolt plate and two on staple plate complete all as specified and directed
S&F SS sliding door bolt with hasp,staple (bolt type) 300mm long not less than 12mm dia with and incl minimum of 06 bolt and nuts four on bolt plate and two on staple plate complete all as specified and directed
All as per item No 26 bove but fixing in repair/replacement
S&F in replacment 150mm floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as specified and directed
S&F in repair Aluminium barel tower bolt 300mm long stove enamelled black with bright bolt & fixed.
S&F in replair Aluminium handle of 150m size oval type stove enamelled black all as specified.
S&F in replacment Aluminium sliding door bolt with hasp,staple (bolt type) 300mm long not less than 12mm dia with and incl minimum of 06 bolt and nuts four on bolt plate and two on staple plate complete all as specified and directed
S & F in repairs 125 mm long mild steel, steel window handle incl nuts & bolts ( all as per sample kept in GE office) complete all as specified and directed by Engineer-in-Charge.
S & F in repairs 300 mm long mild steel, steel window peg stay incl nuts & bolts (all as per sample kept in GE office) complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified and directed.
S&F powder coated aluminium door anodised of approved colour( size of frame : 63.5mx38.10mmx2mm thick & size of shutter : door vertical (style ) with gasket of size 46.3mmx45.00mmx 1.50mm thick, top rail of size 47.00mmx45.00mmx1.30mm lock rail/middle rail 83.00mmx44.50mmx1.65mm thick bottom rail 114.3mmx45.00mmx1.50mm thick including S&F of 4.8 mm thick sheet glass with glazing clip, pvc track gasket ,EPDM rubber gasket on glass of weather tightening alongwith recessed type handle, hingees, mortic lock, door closer complete all as specified as per TD -2004/61R sheet No 1/1
S&F powder coated aluminium window having three track section 92mmx31.75m shutter section 40mmx18mm mounted on bearing to slide on track plain anodised of approved colour including S&F of 5 mm thick frosted/plain glass and wire esh with glazing clip, pvc track gasket ,EPDM rubber gasket on glass of weather tightening alongwith recessed type handle and lock including sealing gap with marble /granite surface with silicon sealent aking it water proof in all manner including aluminium grill complete all as specified and directed by Engineer in Charge .
S&F Aluminium windows made of 1.59 thick powder coated (thickness of powder coating not less than 50 micron) as per aluminium section of size given below .Aluminium window will be of double shutter of glass/ wire gauge shutters including 75 mm pitch aluminium grill fixed in frame with Aluminium U channel including all necessary accessories jointing cleats , glazing clips, rubber neoprene packing, for fixing glass/ wire gauge, aluminium handles and tower bolt 2 Nos 100 mm ‘D’ Type in each door, 2 Nos 100 mm aluminium hinges including necessary steel screws complete all as specified and directed by Engr The size of different aluminium section to be used is as under (a) Outer Frame 110X45X1.59 mm thick (b)shutter frame section size 44X44X1.59 mm thick for glass and 44x25x159mm for wire gauge Note: Rates quoted are inclusive all fittings and fixtures. Glass and wire gauge will be paid separately in respective items.
Taking down existing aluminium doors and refixing the same opening after easing, adjusting and resecuring rubber beads, gasket beading including repair to door closer, floor spring and other fittings etc complete all as directed by Engineer-in Charge
S&F in repair stainless steel chromium plated conduit pipe 15mm dia including bracket, stops rollers etc for cup board , Almira complete all as specified and directed
S&F in repair stainless steel drapery rod of 20mm inner dia (in length as directed) of approved colour with & including decorative finial at both ends and pair of stainless steel brackets fixed at both ends with PVC rawal plug & steel screwes on walls/beams complete as specified and directed
S&F in repair PVC conduit curtain rods of 20mm inner dia (in length as directed) of approved colour with & including decorative finial at both ends and pair of MS bracket with PVC rawal plug & steel screwes on walls/beams complete all as specified and directed
Supply and fixing in repair mild steel/stainless steel brackets for Drapery rods fixed on wall with PVC rawal plug and screws complete all as specifed and directed
Supply and fixing rubber door seal 32mm wide wide with aluminium strip of size 19mm wide fixed with machine steel screw with washer fixed in repair complete all as specified and direct
S&F in repair plain fillets of 2nd class hardwood clean sawn square/rectangular or triangular or bullnosed or rounded on one edge area n exc 3 sqcm complete all as specified and directed
S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples to wooden/steel frames with and including wooden beading complete all as specified & directed.
S&F fixed in repair retractable door hinge including all necessary screws and welding for fixing and including all the activities to ake the door workable complete all as specified and directed by Enginner-in Charge
S&F in repair Mortice lock of brasss body vertical type, size 100 mm
S&F in repair aluminium U Chanel 12mm wide as in kitchen cup board, book shelf etc
Supply and fixing mild steel cupboard shutter with frame, Godrej Pattern, made out of 22 guage mild steel sheet including chromium plated MS handle with proper locking arrangement (brass mortice lock, vertical type, size 65mm, 4 Levers with escutcheon plates & two keys) with & including two coats of spray painting with synthetic enamel paint of approved tint over a coat of red oxide primer including fixing with 6 Nos 12mm dia bolt 150 mm long grouted in brick wall/concrete including making good the disturbed surfaces as original complete all as specified and as directed. Note :- The measurement shall be taken of front elevation and not girthwise.
S&F in repair Alumninium (extruded ) body Door closer hydraulically regulated, designation No. 2,universal type, suitable for door shutters of 701 o 850 mm in width and of weight between 36 to 60 kg and fixed fixed in repair.
S & F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed
S&F in repapir 18-19mm Prelaminated particle board, exterior grade put together prelaminated both sides with decorative chice lamination fixed with screws to timber frame work work/hinges as in cupboard shutters for book shelf showcase etc & including necessary fittings and fixtures like Aluminium 19mm wide & 6mm thick Teak wood beading / edging / lipping fixed with nails to particle board fixed complete all as specified & as directed.
Supplying and fixing in repair kitchen cabinets made of 18 mm thick consisting of panel of 18 mm thick celluca ply of density 600 Kg.cbm density with prelaminated sheet on one side cut in desired size of shutter and fixed with frame as in cabinet boxes with shelf and shutter full size fitted above the kitchen cooking platform and/or other platform including all necessary fittings and fixtures like nickle plated clip hinges, ball catches, knobs, channels etc including dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. Note : Items like cupboard knobs, stainless steel channel, CP plate clip hinges are included in the mentioned rates and as per manufacturesrs specification and drawing.
M & L for machine cut Kota stone slab 25mm thick as in shelves & similar works in single piece not exc. 1.50m in length, both side polished and front edge to be half moulded complete, fixed & jointed with grey cement set and pointed in cement mortar 1:4 including rubbing and mirror polishing (top side only and bottom side shall be self finished only), including cutting chases as required and making good to filling as original in cement mortar 1:4 for inserting stone slab shelves in stone/brick walls complete all as specified and directed.
M&L for cutting holes in stone walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3, not exc. half brick thick (Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall)
Supply and fixing 5.5mm thick sheet glass ordinary quality and glazing with beading and rubber gasket in square exc 0.5 sqm in each pane complete all as specified.
Taking down cement plaster on any type of surface finshes(including tiles) racking out joints hacking for key scrubbing down with water in any description in any position commplete all as specified and directed.
M&L glazed ceramic colour tiles 250x350mm /350x450mm x 7 to 8mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado over cement mortar rendering 10mm thick 1:4 complete all as specified and as directed
M&L rendering 15 mm thick in CM 1:6 on stone masonry surfaces or on other than fair faces of brick masonry finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
M&L for preparing newly plastered surfaces and applying two coats of Oil Bound Distemper (OBD) of approved shade/tint on walls complete all as specified and directed by Engineer-in-Charge.
M&L for preperation of old painted surface of wood or wood based materials description not other size dexcribed over 10cm girth or width & applying one coat of synthetic enamel paint Ist quality all as specified.
GAR CONSTRUCTIONS
VIJAY KUMAR GUPTA
M/S JINDAL ENTERPRISES
AARSINFRATECH
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .