CRC-DTRD-179- GS Road- Part 1

Amount

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Finishing walls with water proofing cement paint of required shade Old work (one or more coats applied@ 2.20 kg/10 sqm) over priming coat of primer @ 0.80 litrs/10 sqm complete including cost of Priming coat.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade 13.99.1 One or more coats on old work.

White washing with lime to give and even shade Old work( Two or more coats)

Dismantling of Fencing (Dismantling of barbed wire fencing/ wire mesh fencing including posts, foundation concrete, back filling of pit by manual means including disposal of dismantled material with all lifts and up to a lead of 1000 metres, stacking serviceable materials and unserviceable materials separately.)

Chain link fabric fencing mesh of size 25x25 mm made of G.I. wire of dia 4 mm

Corner Angle 45x45x5 mm 2.50m long

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied lass beads as per IRC:35 MoSrt&H s specifications

Providing reflective pavement marker with Micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRT&H's fixed to the road surface using the adhesives and the procedures recommended by the manufacturers with three months replacement warranty and free maintenance.

Tree reflector made of heigh intensity grade retro-reflectorised sheeting fixed over aluminium sheeting of 2mm/0.28mm thick firml fixed with necessary galvanized nail.

Labour for removal of mud, debris, silt from the road surface/ debries from the road sides drain deposited ot side for removoi after excavation upto 5.00 KM out side the city area etc. by truck carriage including cleaninas , sweeping the road surface as necessary loading , unloading with labour and material etc. as directed by the deptt.

Direction and place identification sign upto 0.9sqm size board. Providing and erecting direction and place identification retro-Reflectrorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3 fixed over aluminium sheeting, 2mm thick with area not exceeding 0.9sqm fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level

Providing ' Spakle Solar Road Studs, manufactured by Tata Solar India Ltd of size ( 125mmx125mm) 90 mm height with detachable battery, m6LEDs- three on each side for Bi-directional studs/3 LED on one side for unidirectional studs, ultra bright LED in amber and red colour, weight per studs 700+25 gms, flash rate of 50-65 times per minutes completely water resitant and weather proof with replacement warranty and free maintenance fro one year from the date of installation of studs on rood (installation should be made using adhesive and procedures recommended by manufacturer under the supervision of their competant technician)

Labour for washing & cleaning Graffity on Crash Barrier on supermarket flyover

By Mecnanical means (wth milling machine) : Cold of Bituminous Pavement surface up to the required depth by mechanical means using milling machine without disturbing the under laying layers to line and level. cleaning surface property after milling and removing the loose matenajs.stacking the milled materials for re use. necessary & lighting.including hirecharge of of fuel and labour and other incidental charges all complete and as per direction on Engineer-in-charge.

Removal of Milling materials

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor, Including cost of testing of materials at site and laboratory as directed by the deptt.)

Bituminous Concrete (Providing and laying bituminous concrete With 100-120 TPH batch type hot mix plant producing bituminous binder @ 5.4 to 5.6 % of mix and filler transporting the hot mix to work site, as MoSRT& H cl. no.509. complete in all respect (including carriage of mixed materials up to 100 Km initial lead from mixing plant )(lncluding cost of testing of matenals at site and laboratory as directed by the deptt.) BC Milling

Providing and laying Interlocking Concrete Block Pavement (ICBP) conforming to IS:15658-2006 including all lead and lift complete as per technical specification as directed.

CHANDAN HALOI