Loading
Loading…
Loading…
Tender Value
₹43.7 L
EMD Value
₹87,300
Closing Date
17 Jul 2026, 1:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TECHNICAL
12 conditions · 1 needing a document upload
Clause Regarding GST: (a) All the Bidders/tenderers should ensure that they are GST Compliant and their quoted tax Structure are as per GST LAW.(b) Tenderer Should Furnish their GSTIN numbers representing the States in Which they are registered GST, along with address of Registered Office.(c)The Contract is under GST Act and rules as applicable time to time.
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
38 conditions · 8 needing a document upload
Check List: The tenderer(s) would fill up the check list, as per Annexure-XXIII to ensure that they are submitting the complete tender offer.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Electrical Works For: (1)At TSK Division- Construction of 50 Bedded RPF Barrack at MXN Station.(2)At TSK Division- Construction of 30 Bedded RPF Barrack at SLGR Station(3)Upgradation of RPF Barrack at TSK Division
LV-T-14-TSK-947~NFR
LV-T-14-TSK-947
Open
Works - General
12 Months
Tinsukia, Assam
₹0
₹87,300
17 Jul 2026
26 Jun 2026
3 Jul 2026
155 items across 3 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 20,12,728.6 | ||
| — | 114.00 | — | — | ||
| Supply, fitting, fixing, testing & commissioning of wiring materials for concealed type wiring of light point from main/sub-main board to the points by 1.5 mm.sq.single core multi-strand FRLS copper cable through heavy duty PVC pipe complete with modular type switch 6 A, ceiling rose, GI box with suitable modules for fixing switches. | — | — | — | 74,556 | |
| — | 48.00 | — | — | ||
| Supply, fitting, fixing, testing & commissioning of wiring materials for concealed type wiring of Fan Point/Exhaust fan point from main/sub-main board to the points by 1.5 mm.sq.single core multi-strand FRLS copper cable through heavy duty PVC pipe complete with modular type switch 6 A, ceiling rose, Modular GI metal box with suitable modules for fixing switches & Regulators and 1.0 sq mm multistrand FRLS copper Cable in green for earth contuinity wire . | — | — | — | 45,360 | |
| — | 83.00 | — | — | ||
| Supply, fitting, fixing, testing & commisioning of wiring materials for concealed type wiring 5 A plug point from main/sub-main board to the points by 1.5 mm. sq. single core multi-strand FRLS copper cable through heavy duty PVC pipe complete with modular type switch & socket 6 A ,GI metal box with Suitable modules for fixing switch/socket with 1.0 mm² unsheathed FRLS copper cable in green colour for earth continuity wire. | — | — | — | 35,524 | |
| — | 25.00 | — | — | ||
| Supply, fitting, fixing, testing & commisioning of wiring materials for concealed type wiring 15 A plug point from main/sub-main board to the points by 4 mm. sq. single core multi-strand FRLS copper cable through heavy duty PVC pipe complete with modular type switch & socket 15 A , GI metal box with Suitable modules for fixing switch/socket with 1.0 mm² unsheathed FRLS copper cable in green colour for earth continuity wire. | — | — | — | 30,750 | |
| — | 5.00 | — | — | ||
| Supply, fitting, fixing of Wiring materials for Geyser point wiring from DB/ sub main board to the points by 4 mm. sq. single core multi-strand FRLS copper cable through heavy duty PVC pipe complete with modular type switch & socket 16 A , 3 Module Plate, GI metal flush box with Suitable modules for fixing switch/socket with 1.0 mm² unsheathed FRLS copper cable in green colour for earth continuity wire. . One 16 Amps DP MCB 'B' series in MCB enclosure to be provided near Geyser as controlling switch. | — | — | — | 6,455 | |
| — | 44.00 | — | — | ||
| Supply, fitting , fixing of Batten Intergated type LED fitting 20W, 4 Ft, ultra slim co- extruded polycarbonate channel with integrated electronic driver should be as per IEC: 62384/IS:16104( SMPS based constant current output, THD<20%), IP20 protection, color temperature=6500K, rated input voltage=230V AC, 50 Hz, power factor=0.9, view angle>=120°, lumens output not less than 100 lm/Watt, operating voltage range: 140-270 V AC. LED Should be as per LM-80/IS:16105. Fixture Size:(LXWxH=1156x25x35 mm +/-1) . | — | — | — | 11,044 | |
| — | 64.00 | — | — | ||
| Supply and fitting , fixing of 18 Watt LED ,Slim, compact, aluminum die cast edge lit panel light , recess mounted square fixture with opal diffuser and separate electronic driver. Ceiling Cut Out (210x210 mm). | — | — | — | 85,120 | |
| — | 9.00 | — | — | ||
| Supply, fitting, fixing of exhaust fan 300 mm sweep metallic type | — | — | — | 13,257 | |
| — | 5.00 | — | — | ||
| Supply , Fixing and testing of vertical type wall mountedstorage Geyser of Capacity 25Ltrs BEE 5 Star rated , 240V,50Hz with Maximum powerconsumption of 2KW. | — | — | — | 60,315 | |
| — | 540.00 | — | — | ||
| Supply, drawing and connection of single core 6.0 sq. mm PVC insulated & unsheathed multistrand FRLSH copper cable conforming to IS: 694 for voltage grade upto 1100 Volts , as per direction of supervisor incharge at site for main incoming from meter to Main DB. | — | — | — | 45,894.6 | |
| — | 720.00 | — | — | ||
| Supply, drawing and connection of single core 4.0 sq. mm PVC insulated & unsheathed multistrand FRLSH copper cable conforming to IS: 694 for voltage grade upto 1100 Volts , as per direction of supervisor incharge at site. | — | — | — | 40,824 | |
| — | 1080.00 | — | — | ||
| Supply, drawing and connection of single core 2.5 sq. mm PVC insulated & unsheathed multistrand FRLSH copper cable conforming to IS: 694 for voltage grade upto 1100 Volts , as per direction of supervisor incharge at site. | — | — | — | 41,904 | |
| — | 10.00 | — | — | ||
| Supply, fitting, fixing, testing and commissioning of 6 way Double Door SPN MCB DB with IP-43 protection, Door earthing,Neutral Bar,earth bar and bus bar provided with the following MCBs:- (i)MCB SP 32 Amps C series 10KA BC= 2 Nos, (ii)MCB SP 16 Amps C series 10KA BC=2 Nos., (iii)MCB SP 10 Amps C series 10KA BC=2 Nos. | — | — | — | 37,500 | |
| — | 2.00 | — | — | ||
| Supply, fitting, fixing of wall mounted VTPN DB, Vertical TP MCCB as incomer 4 way double door , IP: 43 Protection, Shrounded Neutral Bar and pan assembly with flexible connecting link., cement spill protector, door earthing with the following:(i) MCCB 100 Amps, TPN ,25KA BC= 1 No.(ii) MCB SP 63 Amps, C series, Icn =10KA BC= 4 Nos. (iii) MCB SP 32 Amps, C series, Icn =10KA BC= 3 Nos. | — | — | — | 62,000 | |
| — | 5.00 | — | — | ||
| Erection of earth by 50 mm dia 3 Mtrs. long (3.6 mm thickness) GI pipe , 6 SWG GI wire,GI nuts, bolts including masonry materials for earthing pit, salt, charcoal etc. and construction of earth pit covered with RCC cover slab 12.7 mm thickness and watering pipe per Drawing No PCEE/ELG/DRG/2024/1 Dtd 30.09.2024 | — | — | — | 21,770 | |
| — | 1.00 | — | — | ||
| Supply, installation,testing and commissioning of Acrylic LED signage for RPF Barrack, Size 6x4 ft(24 SQ ft) with 4mm ACP sheet background. The Frame of the signage board to be fabricated using 1.5x1 inch, MS square pipe 16 gauge. The letters to be engraved with be 40 mm Acrylic Letters. The Power supply unit will be seperate Replaceable Electronic driver230 V AC/12 V DC to be suitable fixed outside the LED signage board. The Signage board Should have IP 65 Degree of Protection. the caption of the LED signage board will be trilingual : English, Hindi & Assamese with and caption will be provided by Railways as per requirement. | — | — | — | 48,144 | |
| — | 500.00 | — | — | ||
| Supply, laying, connection, testing and commissioning of LT XLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured stranded aluminum conductor cable size 70 sq. mm. 4 core having Galvanized steel Strip, Extruded PVC Type ST2 Sheathed, 650/1100V Grade As Per IS 7098(Part 1) 1988. | — | — | — | 6,24,000 | |
| — | 300.00 | — | — | ||
| Supply, laying, connection, testing and commissioning of LT XLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured stranded aluminum conductor cable size 16 mm.sq. 2 core having Glavanised Wire Solid Aluminum Conductor, Extruded PVC Type ST2 Sheathed, 650/1100V Grade As Per IS 7098(Part 1) 1988. | — | — | — | 90,300 | |
| — | 450.00 | — | — | ||
| Cable laying for 70 SQ MM 4 Core by excavation of earth depth 0.75 Mtrs. into breadth 0.508 Mtrs. below the ground level and a layer of course sand of 7.5 CM thickness shall be spread over the ground before laying the cable and the cable shall be covered with a layer of course sand of 7.5 CM thickness including cable laying clamped on wall/metal hume pipe.The bottom of cable trench shall be leveled and got rid of any sharp material. Above the Layer of Course Sand 3 inch Size Brick is to be provided for protection of cable. Cable route markers to be provided at an interval not less than 50 Mtrs. All conditions to be fulfilled as per DRG No : PCEE/ELG/DRG/2024/2 Dtd 04.10.2024 | — | — | — | 64,350 | |
| — | 280.00 | — | — | ||
| Cable laying for 16 SQ MM 2 Core by excavation of earth depth 0.75 Mtrs. into breadth 0.508 Mtrs. below the ground level and a layer of course sand of 7.5 CM thickness shall be spread over the ground before laying the cable and the cable shall be covered with a layer of course sand of 7.5 CM thickness including cable laying clamped on wall/metal hume pipe.The bottom of cable trench shall be leveled and got rid of any sharp material. Above the Layer of Course Sand 3 inch Size Brick is to be provided for protection of cable. Cable route markers to be provided at an interval not less than 50 Mtrs. All conditions to be fulfilled as per DRG No : PCEE/ELG/DRG/2024/2 Dtd 04.10.2024 | — | — | — | 35,280 | |
| — | 6.00 | — | — | ||
| a) Supply and erection of single arm type Hot Dip Galvanized in single deep to average 65 micron DFT 7 mtr. long octagonal pole similar to NEZONE cat. No. NZOP7 with sectional dia 130x70 mm, overall sectional thickness 3 mm complete with base plate size 220x220x12 mm, 4 Nos. 700 mm long foundation bolt of 20 mm dia with all other accessories as per direction of Engineer in charge at site. b) Supply and erection of PCC/RCC/shallow foundation of size and depth as per recommendation and drawing of the manufacturer (approx. 1.6 mtr.x 0.6 mtr.x0.6 mtr.) with excavation of earth for foundation of all depth and all places, nature and condition of soil including de-watering, shoring, shuttering, batching, mixing, placing, leveling, carrying etc and re-filling the pit after completion of foundation work from excavated earth or borrowed pit by contractor's own arrangement for octagonal poles. Drawing of foundation details, loading, sectional plan bar bonding schedule etc. should be submitted before execution to get the approval from Rly. competent authority. c) Supply and erection of suitable size galvanized single arm bracket 1.5 mtr. long along with spigot for holding/supporting one no. street light fitting. | — | — | — | 95,994 | |
| — | 10.00 | — | — | ||
| Supply and installation of Desert cooler 55 Ltrs tank capacity having coverage area of 1200 sq feet and air delivery rate of 12000 meter cube per hour with cooling pads of honeycomb type and fan size 16 inch with motor capacity of 650watt(having copper windings) and speed of 2600rpm with air throw distance of 100 feet with features of inverter compatibility,ice chamber,auto fill and drain,castor wheel,auto louver movement with thermal overhead protection,water level indicator having body of high grade,rust-resistant plastic for durability and lightweight design | — | — | — | 1,80,900 | |
| — | 39.00 | — | — | ||
| Supply, Installation of Energy Efficient BLDC (Brushless DC), 28 Watt 1200 mm sweep ceiling fan | — | — | — | 1,18,482 | |
| — | 6.00 | — | — | ||
| Supply, fitting, fixing of LED Street Light 45 W to be fixed on octagonal pole. Specification of 45 W Street light : Housing: Pressure die-cast aluminium alloy for housing (heat sink) for effective thermal management, sturdiness & excellent corrosion resistance. Cable gland is used for maintaining ingress protection, Finish: Epoxy powder coated siemens grey after phosphochromate treatment,Light source :High efficiency long life LED chip in modules with lumen efficacy of 110 lm/W with PC lens to ensure better uniformity of light distribution. Cover: Tempered protective toughened glass, thermal, shock and impact-resistant, fixed to the housing with SS screws. Electronic Driver: Built-in potted electronic LED driver with APFC (SMPS based constant current supply), lower THD, Open Circuit protection, Phase to Phase protection, Over Voltage protection, Surge Voltage protection & other safety tests as per IS 15885 Part-2/Sec 13. | — | — | — | 28,320 | |
| — | 1.00 | — | — | ||
| "Supply, installation, testing and commissioning of Water cooler storage capacity 80 Ltrs, cooling capacity : 40 ltrs/hr with RO commercial water purifier. Specification of water cooler: (i) Dimension: Width: 640 mm, Depth: 450 mm Height:1350 mm (ii) Weight without water: 85Kg (iii)Maximum Current(Amps)=5Amps (iv) Cooling capacity Ltrs/Hour=40 (v) Storage capacity= 80 Ltrs (vi) No of Cold water Taps= 1 No(vii) Refrigerant: R-134A (viii) Compressor: Hermatically Sealed with suction gas cooled motor equipped with overload protection.(ix) Condenser Fan: Propeller Type (x) Thermostats: Automatically controls temperature,(xi) Power Supply: 230 V AC+/- 10% , 50 Hz, Single phase, (xii) Water Supply: 3 M to 12 M head(xiii) Power Supply: 5 Amps , 3 pin plug with proper earth connection. Specification of Commercial RO water purifier: 1. Capacity: 50±10 ltrs/hr. 2. Compact Instituiotional RO System with Automatic Flushing. 3. Consist with 2 nos. of booster pump and 4 nos .of RO Membranes. 4. Duty cycle: 500 ltrs/day i.e. 8 10 hrs/day. 5. TDS Rejection: 90±5% 6. Dimensions: W 485 x D 300 x H 840." | — | — | — | 69,990 | |
| — | 5.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderDocumentTSK947.pdf
ATTACHMENT
AnexxuresSectionVIINew.pdf
ATTACHMENT
GCCCorrectionslipACS11.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .