MAINTENANCE TO SEWAGE LINE SEPTIC TANK ALONGWITH CLEANING OF SEWAGE LINE MANHOLES AND PATH COMPOUND WALL HARD STANDING AND FENCING ETC AT 7AFH KANPUR CANTT

Amount

Demolition and breaking up 300mm bore dia drain pipe (salt glazed ware, AC or reinforced cement concrete) set in cement mortar complete all as specified and directed.

Demolition and breaking up 200mm bore dia drain pipe (salt glazed ware, AC or reinforced cement concrete) set in cement mortar complete all as specified and directed.

Demolition and breaking up 150mm bore dia and below drain pipe (salt glazed ware, AC or reinforced cement concrete) set in cement mortar complete all as specified and directed.

Excavation in trenches n. exc 1.5 m wide & n.exc 1.5 m in depth and getting out in soft / loose soil complete all as specified and directed.

All as per item No. 4.00 above but exc 1.5 mtr and not exc 3.0 mtr in depth complete all as specified and directed.

Excavation over area n.exc 1.5m deep and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed.

Removing excavated material exc. 1.5 K.M.but n exc.5 K.M. and depositing where directed complete all as specified and directed

M&L for 150mm dia bore RCC pipe class NP-2 laid and jointed in cement mortar with collars and tested complete all as specified and directed.

M&L for 200mm dia bore RCC pipe class NP-2 laid and jointed in cement mortar with collars and tested complete all as specified and directed.

M&L for 300mm dia bore RCC pipe class NP-2 laid and jointed in cement mortar with collars and tested complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 as in concrete bed to drain pipes of 150mm dia bore including packing under and haunching against the sides of pipe after they are laid complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 as in concrete bed to drain pipes of 200mm dia bore including packing under and haunching against the sides of pipe after they are laid complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 as in concrete bed to drain pipes of 300mm dia bore including packing under and haunching against the sides of pipe after they are laid complete all as specified and directed.

Taking down cement plaster including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

S & F in repairs (SWR) gulley trap 125/110mm setting and jointing with solent cement complete all as specified and directed.

Demolition of brick masonry built in cement mortar including all quoins, arches, pillars etc and clearing off the premises complete all as specified and directed.

M&L for Brick work with sub class‘B’ bricks, using old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Brick work (Except bricks) straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. Note:- Old bricks obtained from item No 17.00 shall be reused after cleaning.

M&L for rendering 15mm thick in CM (1:4) on fair faces of concrete surfaces or brick work, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over and including a coat or primer complete all as specified and directed.

M&L for preparation of new surface of walls and applying three coats of white wash complete all as specified and directed.

Demolition of PCC n. exc 15 cm thickness in floors, roofs or pavings and throwing debris at low lying area at a distance not exc 1 km complete all as specified and directed

M&L for glazed chequered cement concrete tiles 20 cmX20 cmX22 mm / 30 cmX30cmx20 mm with with grey cement and pigments set , jointed and pointed in neat cement slurry over and including 15 mm thick 1:6 screed bed complete all as specified and directed.

M&L for cement concrete type C-2, 1:3:6 (using 40mm Graded Stone Aggregate), as in Surface Channels and Drains, etc, including use and waste of necessary form work complete all as specified and as directed.

M&L for cement concrete 1:2:4 mix type B-1 (using 20 mm graded stone aggregate) as in coping/benching of man hole etc including necessary form work complete all as specified and as directed.

M&L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in foundation filling and mass concrete complete all as specified and as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and as directed.

M & L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection laid to slope of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm thick joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 type B-2 (40mm graded stone aggregate) as in base course/hardstanding finish even and smooth without using extra cement with construction joints complete all as specified and as directed.

S&F in repairs 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors, on walls complete all as specified and as directed.

S&F in repairs 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors, walls complete all as specified and as directed.

S&F in repairs PVC (SWR) bends of any radius of 110mm dia complete all as specified and as directed.

S&F in repairs PVC (SWR) bends of any radius of 75mm dia complete all as specified and as directed.

S&F in repair for PVC (SWR) junction (single ‘T’) with / without access door for 110mm dia pipe complete all as specified and as directed.

S&F in repair for PVC (SWR) junction (single ‘T’) with / without access door for 75mm dia pipe complete all as specified and as directed.

S&F in repair for PVC (SWR) vent cowl suitable for 75mm dia PVC pipe complete all as specified and as directed.

Opening & cleaning of blockage of WC, nahani trap/ gully trap of bathroom, kitchen and messes etc any pattern by rodding or manually upto 1st manhole without damaging any sanitary fitting etc including taking down and refixing of manhole covers in original position complete all as directed.

Cleaning of chocked/blocked sewage lines of any dia & upto 5 meter depth by collecting loose sedimented sand, frill, ash, sludge water, rags, fibers or vegetation in nearest manholes for disposal including taking down cover slab of any type, thickness and size carefully and refixing in same position after necessary cleaning and removing the cleaned sludge out side the MOD land in sealed containers all as specified and directed by Engr In Charge. NOTE :- Length of sewer line Manhole to manhole measured for payment purpose

M&L for cleaning of chocked sewer line of any Dia upto 5 metre depth by hydraulic operative high pressure suction pump jetting sewer cleaning machine including skilled operator and supervisor for cleaning chocked sewer line including water for jetting and removal of sludge/silt/ liquid/ mud and sand (in foul position) etc, out side MOD premises complete all as specified and directed NOTE :-1.Length of sewer line between Manhole to manhole shall be measured for payment purpose. 2. A panel recovery of Rs 500.00 per complaint per day shall be imposed on contractor for not cleaning of sewer line by mechanical operated high pressure sewage cleaning machine within 48 hrs of intimating the complaint to the contractor by JE -in -charge.

Cleaning of manholes of any size & upto 5 meter depth manually by taking off sludge waste soil and silted soil from the existing manhole of any size including taking down cover slab of any type, thickness and size carefully and refixing in same position after necessary cleaning and removing the cleaned sludge out side the MOD land in sealed containers all as specified and directed by Engr In Charge.

M&L for dewatering and desludging of septic tanks/ manholes/soakage wells mechanically by opening the covers, removing liquid/ sludge mixed liquid under any position including foul conditions and cleaning the inlets and outlets etc with water, placing the covers back in position and disposing off the same out side of MD land complete all as specified and directed. Note:- The liquid (sludge mixed) to be disposed off in sealed tins or sludge removal tankers and the same is deemed to be included in the quoted rate.

Pumping out sewage water from the man holes /Septic taank/soakage well at different locations by means of sewage tanker fitted with pump (5000 Ltr capacity) and disposing out off MD land as directed by Engineer-in-charge.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching and forming branch channel 1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required in 150mm dia rendering, cutting out branch channel and making good in PCC (1:2:4) complete all as specified and as directed.

M&L for repairing of damaged portion of mouth at tarrace/roof surface of rain water pipe by cleaning and repairing to mouth of RWP by using CM (1:3) with and including mixing of 3% WPC & sealed with 85/25 hot blown grade bitumen complete to make joint of rain water pipe and roof surface fully leak proof complete all as directed by Eng-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified and as directed.

Dismantling of barbed wire, any type complete all as specified and as directed.

S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixed to any type of standerd rails straining bolts including securing or tying and binding at crossing with and galvanised mild steel wire staple etc complete all as specified and as directed.

All as per item No 49 above but restraining and re securing only including making good staple complete all as specified and as directed.

M&L for providing precast RCC Jali 40 mm thick made out of PCC (1:2:4) B-0 (using 12.50 mm graded stone aggregates including reinforcement) complete all as specified and as directed.

M&L for coloured machine pressed precast concrete interlocking paver block 80 mm thick having laquer finish any shape and size confirming to IS 15658-2006, M-40 with grey cement and pigment over and including 25 mm thick Ganga sand including dismantling old interlicking paver block complete all as specified and as directed.

M&L for hard core of gauge not exceeding 63 mm of broken granite stone deposited spread and levelled in layers not exceeding 15 cm watered and rammed to a true surface complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as directed.

M&L for 16-18 mm thick granite (of any type) work (table rubbed and polished) in steps jambs, pillers, window -cills cooking platforms and like in cement mortal (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L machine cut kota stone slab flooring 18-20mm thick over and including 15 mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L machine cut kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over and including 10 mm thick cement plaster in cm (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and as directed.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), and removing rubbish off the Premises, complete all as specified and as directed.

M & L for industrial , heavey duty vitrified tiles, scratch, strain & chemical resistant, 600mmx600 mmx15-16 mm thick, MOH not less than 6, water absorption less than 0.5%, laid and jointed with adhesive, with 3mm spacer as in floors, all as per manufacturer instruction over and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed

M&L for glazed coloured ceremic joint free tiles in vertical surface 600X300 /450x300 mm size 7-8 mm thick or as required, set over and cncluding 10 mm thick backing coat in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement tomatch shade of tiles complete all as specified and directed

M&L for non skid ceramic coloured tiles 7 to 8 mm thick square or rectangular area of each tile exc 0.11sqm but n exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified over and including15 mm screed bed in CM 1:6 complete all as specified and directed

S&F 15mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length including taking down old steel tubing and removal from site, complete all as specified and as directed

S&F 20mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length including taking down old steel tubing and removal from site, complete all as specified and directed

S&F in repair vitreous china squatting pan Orissa Pattern, size 580 x 440mm white with integral foot rest including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and as directed

S&F in repair Vitreous China Wash down Water Closet Pan (Pedestal Pattern) White including fixing Bolts (excluding Flushing Cistern and Flushing Pipe) with Plastic Water Closet Seat, Black, Closed Pattern with Recessed Bottom and Cover including including Making Good disturbed Surfaces with Cement Mortar 1:3, complete all as specified and as directed.

S&F in repair padestal for Wash basin, vitreous China requisite size complete all as specified and directed by Engr- in charge .

S&F in repair 550x400mm Wash basin, vitreous China (Flat back) including fixing and pinning in ends of brackets including brass waste coupling of requisite size and waste pipe complete all as specified and directed

S&F in repair 550x400mm Wash basin, vitreous China counter top including fixing and pinning in ends of brackets including brass waste coupling of requisite size and waste pipe complete all as specified and directed

S&F in repair 100 mm bore dia cast iron bends (any radius) with duck's foot rest & oval access doors with cement joint, fixed on walls complete all as specified and directed

S&F in repair 75 mm bore dia cast iron bends (any radius) with duck's foot rest & oval access doors, with cement joint, fixed on walls complete all as specified and directed

S & F in repair PVC (SWR) floor trap of 75 mm outlet plain with grating including jointing with solvent cement complete all as specified and directed

S&F 100 mm bore dia cast iron pipes and vent pipes(sand cast), any length with or without ears with cement joint, fixed on walls including dismantling old CI pipes and removed from site,complete all as specified.

S&F 75 mm bore dia cast iron pipes and vent pipes (sand cast), any length with or without ears with cement joint, fixed on walls including dismantling old CI pipes and removed from site,complete all as specified.

Dismantling of RCC posts or struts any description, any section including taking out embedded portion in concrete, brick masonary etc and making good disturbed ground.

S&F mild steel work as in gate,post and struts in fencing incl cutting top to shape as directed, drilling holes, notching of wire etc complete all as specified and directed

Dismantling fencing wire mesh, any type.

Supply only chain link MS galvanised fencing,any type and size complete all as complete all as specified and directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed

M & L rendering 15mm thick on brick/stone or concrete surfaces in cement Mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M & L preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

Construction of soakage well, excavation in any type of soil, foundation PCC 1:3:6, wall of honey combed , Brick masonry in CM 1:6, RCC cover slab size of well 1.80 dia and 3.00m depth , including demolition of existing old unserviceable soakage well and filling soil to match surface with existing ground surface complete all as specified, shown on drawing and directed.(ref TD of CENZ for detail specification) Note:- the rate of soil for filling in old U/S soakage well is included in quoted rate of this item.

S&F in repair Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, incl nut and bolts and securing ends of stay to wall or roof for 75/100 mm bore CI pipe grouted in PCC 1:2:4 complete all as specified and directed.

Demolition of RCC of any discription in any position not otherwise described including cutting reinforcement as required and removing the debries out of MD land complete all as specified.

M&L for precast RCC (1:2:4) type B1 using 20 mm graded stone aggregate as in man hole cover slabs, set in cement mortar 1:6 (reinforcement shall be measured and paid separately) complete all as specified and directed.

M&L for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending hooking etc & binding with mild steel binding steel wire (annealed) not less than 0.9mm dia conforming to Fe-410-S or Fe – 410-O complete all as specified and directed.

S&F factory made precast M-30 grade RCC drain of dimension 1000mmx450mmx500mm depth of concrete rienforced with 8 mm dia TMT bar of Fe-500 grade at 150 mm c/c spacing both way with strong vibrating compaction by vibratory table including jointing & finishing complete all as specified and directed. Make:- Tulip/NTC

S&F factory made precast M-30 grade RCC drain of dimension 1000mmx300mmx300 mm depth of concrete rienforced with 8 mm dia TMT bar of Fe-500 grade at 150 mm c/c spacing both way with strong vibrating compaction by vibratory table including jointing & finishing complete all as specified and directed. Make:- Tulip/NTC

S&F factory made precast M-30 grade RCC plain/perforated drain covers having dimension 900mmx450mmx50mm of concrete rienforced with 8 mm dia TMT bar of Fe-500 grade at 150 mm c/c spacing both way with strong vibrating compaction by vibratory table complete all as specified and directed. Make:- Tulip/NTC

S&F factory made medium duty precast M-30 grade RCC manholes frame with cover confirming to IS 12592 having dimention 600mmx600mmx60mm of concrete rienforced with strong vibrating compaction by vibratory table complete all as specified and directed. Make:- Tulip/NTC

S&F factory made medium duty precast M-30 grade RCC manholes frame with cover confirming to IS 12592 having dia 500mm and 70mm thick of concrete rienforced with strong vibrating compaction by vibratory table complete all as specified and directed. Make:- Tulip/NTC

Dismantling of concertina coil 600mm dia any shape including razor wire of six line etc all as specified and directed.Note :- Concertina coil and six link razor wire shall be measured as one Rm, complete all as specified and directed.

S&F 600 mm dia punched tape concertina coil with two handle and spikes at both end of coil with dovetail clips [18 SWG], incl razor wire [7 No], 6m length of each wire medium size, barbed length 20mm width 14mm, incl 51 pins, 128 Nos of clips in each coil incl 230gm/ Sqm Zinc coating on core wire, complete all as specified and directed.

Re Fixing only existing serviceable concertina coil and razor blade including necessary fittings complete all as specified and directed.

S & F in repair 10 litre capacity PVC low level cistern ‘ white with inlet, float valve including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified and directed.

S&F in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair brass chromium plated ovehead shower with shower arm complete all as specified and directed.

S&F in repair 15 mm bore concealed type stop valves, cast copper alloy, screwed down, high pressure, with capstan head, fancy type, chromium plated, with long shank and cup, screwed both ends for iron pipe or for unions and fixed complete.

S&F in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15mm bore Bib taps long body, cast copper alloy fancy type chromium plated with hand elbow operated handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair soap dish, brass, chromium plated, fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thicksheet glassshelf with chromium plated guard and railing complete all as specified and directed.

S & F in repair stainless steel grating square 100 mm size complete all as specified and directed.

S&F in repairs brass chromium plated towel rail 600 mm long between flanges complete all as specified and directed.

S&F in repair 15 mm bore two way Angle cock, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F Vitreous China Urinals, half stall type white (back or corner wall type), complete including providing and fixing plugs, bedding urinals against wall in CM 1:2, securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, CP waste coupling, waste pipe, automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete. complete all as specified and as directed by Engr-in-Charge.

Removal of waste material/ debris/ soil/garbage etc from hospital premises to outside of MOD land including lifting arrangement & making good of disturbed surfaces complete all as directed. Note:-repair/replacement for any damage of existing cable/pipe lines/ sewage lines/hard standing etc will be done by contractor without any extra cost to the Govt. Note:- (1.) A panel recovery of Rs. 500/- per complaint per day shall be imposed on contractor if complaint will not be done within 48 hrs of intimation by JE In charge. (2) 2x sweeper for attending daily basis complaints will be provided by contractor everyday upto completion of contract excluding sunday/holidays from 0830 hrs to 1700 hrs without fail for smooth funtioning of hospital & avoid unhygenic atmosphere near patients. A panel recovery of Rs. 500/- per sweeper per day shall be imposed on contractor on absence of sweepers. (3) One serviceable water pumping set of 1 HP with 5 mtr hose pipe of suitable dia will be provided to sweepers by contractor for emergency dewatering of sewage lines/ manholes/soakage wells during whole period of contract agreement..A panel recovery of RS. 500/- per day shall be imposed on contractor if found unserviceable. (4) measurement will be done after complete removal of debris of connected items .

m/s sahu enterprises

M.M.V. CONSTRUCTIONS

M/S K.P. ENTERPRISES