REPAIR/REPLACEMENT OF CORRODED CI/GI PIPE LINES AT RANGIYA AND CHANGASARI MIL STN UNDER GE RANGIA

Amount

Excavation in trenches not exceeding 1.50 meter wide and not exceeding 1.50 meter in depth for laying pipe etc and getting out in soft/loose soil complete all as specified and directed.

Returning filling in, excavated earth including spreading leveling watering and well ramming in layers not exceeding 25cm in soft/loose soil after the pipes fittings are laid/fixed jointed and tested complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.50 meter above the starting point complete all as specified and directed

Taking out old existing galvanised iron water mains 150 mm bore (including all fittings) with spigot and socket ends and fittings for re-use in the work and removing unserviceable pipes and fittings from site complete all as specified and directed.

All as per serial item No. 04 above but for 100 mm bore

All as per serial item No. 04 above but for 80 mm bore

All as per serial item No. 04 above but for 50 mm bore

All as per serial item No. 04 above but for 40 mm bore.

All as per serial item No. 04 above but for 32 mm bore.

All as per serial item No. 04 above but for 25 mm bore.

All as per serial item No. 04 above but for 20 mm bore

All as per serial item No. 04 above but for 15 mm bore

Laying only old serviceable galvanised iron water pipe 150 mm bore in trenches including cleaning of pipes as required and testing complete all as specified and directed.

All as per serial item No. 13 above but for 100 mm bore

All as per serial item No. 13 above but for 80 mm bore

All as per serial item No. 13 above but for 50 mm bore

All as per serial item No. 13 above but for 40 mm bore.

All as per serial item No. 13 above but for 32 mm bore.

All as per serial item No. 13 above but for 25 mm bore.

All as per serial item No. 13 above but for 20 mm bore

All as per serial item No. 13 above but for 15 mm bore

Supply and laying medium grade galvanised iron water pipe 150 mm bore with all fittings in trenches including testing complete all as specified and directed.

All as per serial item No. 22 above but for 100 mm bore.

All as per serial item No. 22 above but for 32 mm bore.

All as per serial item No. 22 above but for 25 mm bore.

All as per serial item No. 22 above but for 20 mm bore

Supply and laying PP-R Pipes 110 mm dia ( PN 16/ SDR 7.4) with all fittings laid in trenches including testing complete all as specified and directed.

All as per serial item No. 27 above but for 90 mm dia( PN 16/ SDR 11)

All as per serial item No. 27 above but for 63 mm dia( PN 16/ SDR 11)

All as per serial item No. 27 above but for 50 mm dia ( PN 16/ SDR 11)

All as per serial item No. 27 above but for 40 mm dia ( PN 16/ SDR 11)

All as per serial item No. 27 above but for 32 mm dia ( PN 16/ SDR 11)

All as per serial item No. 27 above but for 25 mm dia ( PN 16/ SDR 11)

All as per serial item No. 27 above but for 20 mm dia ( PN 16/ SDR 11)

M&L for construction of valve pit of internal size 120 cm X 120 cm X 90 cm with one brick thick brick masonry wall in cement mortar (1:4), PCC foundation 15cm thick (1:4:8) type D-2 with 15cm offsets, PCC copping 5 cm thick (1:2:4) type B-1, plastering 15mm thick in cement mortar (1:4), 40X40X6mm angle iron frame and 3mm thick MS sheet cover with locking arrangement including painting to steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer and necessary excavation and earth work including dismantling of existing one complete all as specified and directed.

All as per serial item No. 35 above but of 90 cm X 90 cm X 60 cm

S&F gun metal globe or gate valve, with iron wheel head screwed both ends for iron pipe of 50 mm bore including dismantling unserviceable one complete all as specified and directed.

All as per serial item No. 37 above but for 40 mm bore

All as per serial item No. 37 above but for 32 mm bore

All as per serial item No. 37 above but for 25 mm bore

All as per serial item No. 37 above but for 20 mm bore

Supply and laying PP-R gate valve for 50mm bore pipe (brass insert) complete including dismantling unserviceable one all as specified and directed.

All as per serial item No. 42 above but for 40 mm bore

All as per serial item No. 42 above but for 32 mm bore

All as per serial item No. 42 above but for 25 mm bore

S&F cast iron sluice valve for 150 bore pipe heavy duty (PN-1) with brass spindle and iron wheel head flanged both ends and including all jointing materials required viz rubber gasket 3mm thick, bots, nuts and washers including dismantling old unserviceable one complete all as specified and directed.

All as per serial item No. 46 above but for 100 mm bore

All as per serial item No. 46 above but for 80 mm bore

KAKWANI BUILDERS

G.K. TRADERS