GE 861 EWS-61/2024-25

Amount

Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc. complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete in ground floor and paving n. exe 15 cm thick below or above GL complete all as specified and directed by Engineer-in-Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store/credit to contractor complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhat or frame with shutters (without taking shutter from the frame) exceeding 1.5sqm and not exceeding 4.00 sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) n/exe 1.50 Sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description n.exc 2.00 Sqm each leaf complete all as specified and directed by Engineer-in-Charge.

Demolition of brick or stone masonry built in cement mortar including all necessary arches quoins etc. complete all as specified and directed by Engineer-in-Charge.

Material and labour brick work with sub class ‘B’ brick straight or curved on plan exceeding 6m mean radius in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

All as per item No 8 above but except bricks complete all as specified and directed by Engineer-in-Charge.

M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane complete all as specified and directed by Engineer-in-Charge.

M&L for 4mm thick figured glass pin headed type and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane complete all as specified and directed by Engineer-in-Charge.

M&L 2nd class soft wood, plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge.

S&F 2nd class hard wood 35 mm thick panelled shutter (any number of panels ) with panels of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed by Engineer-in-Charge.

Supply and fixed 35mm thick 2nd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc (internal sash bars) edges of framing plane, chamfered or rounded fitted and mitred beads for securing glass etc size of members as specified in SSR Part-I Section 8 clause 8.24(b) complete all as specified and directed by Engineer-in-Charge.

S&F for 30 mm thick 2nd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc windows/ventilators, devided into square with plain chamferred or rounded, mitred and with edges of sash bars any numbers , provided with stiles and rails as specified in SSR part I section 8 clause 8.24 (b) complete all as specified and directed by Engineer-in-Charge.

S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5 mm single side prelaminated PVC sheet reinforced with MS square tube manufactured as per SSR Part-I specifications and drawings complete all as specified and directed by Engineer-in-Charge.

S&F factory made solid panelled PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and gap insert for top rail and bottom rail panelling of plain colour PVC to sheet to be fitted in the MS frame welded / sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed by Engineer-in-Charge.

S&F aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed by Engineer-in-Charge.

S&F aluminium anodised barrel tower bolts extruded section of size 200 mm complete all as specified and directed by Engineer-in-Charge.

S&F aluminium anodised barrel tower bolts extruded section of size 150 mm long complete all as specified and directed by Engineer-in-Charge.

S&F aluminium handle extruded febricated type anodised of size 150 mm complete all as specified and directed by Engineer-in-Charge.

S&F for butt hinges 100mm medium weight cold rolled mild steel complete all as specified and directed by Engineer-in-Charge.

S&F butt hinges 75 mm medium weight cold rolled mild steel complete all as specified and directed by Engineer-in-Charge.

S&F mils steel ordinary rat tail rod pattern springs including roller and roller plate, 300mm complete all as specified and directed by Engineer-in-Charge.

S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed by Engineer-in-Charge.

S&F vitrified ceramic dark shade/double charged/ultra charged/Granite /Marble /wood textures coloured tiles 10mm thick (square/rectangular) polished, area of each tiles exc 0.36 sqm b n exc 0.42 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

S&F coloured Non skid ceramics tiles 7 to 8mm thick area of each tiles exceeding 0.18 Sqm but n.exc 0.38 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed/bedding layer of 15mm thick in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

M&L for Coloured glazed ceramic tiles in vertical surfaces 450 x 300 x 7 mm thick set over and including 10mm thick backing coat in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks or stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

Dismantling water storage tanks of any description n. exc 500 litres capacity and removing from site complete all as specified and directed by Engineer-in-Charge.

S&F Rotational moulded polyethylene 500 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed by Engineer-in-Charge.

S&F Vitreous china wash down water closet pan (pedestal pattern), white, including 'P' or 'S' trap, seat cover and fixing bolts including connections to flush pipe & making good to floor in cement mortar M-15 (1:2:4) type B-1 (using 20mm graded crushed stone aggregated) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs toilet paper holder of brass fixed to walls with chromium plated (CP) brass screws complete all as specified and directed by Engineer-in-Charge.

S&F in repairs health faucet (ABS Body), chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Chromium plated shower rose with or without swivel joint, 125mm size, including fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Glass shelf assembly 60cm long with CP guide rails complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15 mm bore brass CP wall mixer for mixing hot and cold water screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed by Engineer-in-Charge.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connections of flush pipe to squat pattern closet including lime concrete bedding and all joint making good to the floor complete all as specified and directed by Engineer-in-Charge.

S&F in repairs vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (min), with grating and union for discharge pipe including connections to flushing system, flush pipe & waste pipe) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs stain less steel gratings , 125mm dia complete all as specified and directed by Engineer-in-Charge.

S&F in repairs PVC valve less 10 litre capacity syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed by Engr-in -Charge.

S&F in repairs Vitreous china wash hand basin, white, flat back, size 550 x 400 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand Including S&F of 15mm bore CP pillar tap, waste coupling and 32mm dia PVC waste pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15 mm size PVC connection with PTMT nuts of 600 mm long complete all as specified and directed by Engineer-in-Charge.

S&F in repairs swivel shower rose of PTMT any colour with arm, 195 mm long with bend of 45 degree with flange (both min wt 80 gms ) complete all as specified and directed by Engineer-in-Charge.

S&F 100mm cast iron sanitary connection for WC outlet complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 75 mm dia CI floor trap, with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 complete all as specified and directed by Engineer-in-Charge.

S&F cast iron Nahani trap 75 mm dia including jointing to pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15 mm bore fancy type CP bib taps cast copper alloy with crutch or butterfly handle, screwed down for iron pipe complete all as specified and directed by Engineer-in-Charge.

S&F & repairs, 15 mm bore CP stop/angle valve cast copper alloy screwed down , high pressure with crutch or butterfly handle fancy type complete all as specified and directed by Engineer-in-Charge.

S&F & repairs, 15 mm bore Stop valves, cast copper alloy with long shank and cup (concealed type) cast copper alloy screwed down , high pressure fancy type complete all as specified and directed by Engineer-in-Charge.

Taking up or down 15mm dia GI tubing and connections including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-Charge.

Taking up or down 20 mm d ia GI tubing and connections including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-Charge.

S&F 15 mm bore GI tubing med grade galvanised with all fittings and fixed complete to walls & floors etc complete all as specified and directed by Engineer-in-Charge.

S&F 20 mm bore GI tubing med grade galvanised with all fittings and fixed complete to walls & floors etc complete all as specified and directed by Engineer-in-Charge.

Fixing only GI tubing in any grade to walls or floors 15 mm complete all as specified and directed by Engineer-in-Charge.

Fixing only GI tubing in any grade to walls or floors 20 mm complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floor complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floor complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge.

S&F 110mm PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge.

S&F 75mm PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge.

M&L for 75 mm thick PCC (1:3:6) type C-2 using 40mm garded crushed stone aggregate as in plinth protection etc finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

S&F glass dividing strips, 38x3mm thick as in floors complete all as specified and directed by Engineer-in-Charge.

S&F in repairs aluminium anodised tubular towel rail, 20mm dia D type, 60cm long between flanges complete all as specified and directed by Engineer-in-Charge.

S&F brackets for towel rails complete all as specified and directed by Engineer-in-Charge.

Dismantling of timber scantling 40sq cm and over in sec in any position in unframed work complete all as specified and directed by Engineer-in-Charge.

M&L timber fixed in clean sawn second class hard wood as in scantling etc. complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15mm thick on fair face of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth .without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 10 mm thick in cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces finished even & smooth without using extra cement as in ceiling complete all as specified and directed by Engineer-in-Charge.

M &L for preparing plastered or unplastered new surfaces of walls and applying three coats of white wash on walls complete all as specified and directed by Engineer-in-Charge.

M &L for preparing plastered or unplastered new surface of walls and applying two coats of Cement base paint over a coat of alkali resistant primer on walls (Externally) complete all as specified and directed by Engineer-in-Charge.

M &L for preparing plastered or unplastered new surface of ceiling and applying three coats of white wash on ceiling complete all as specified and directed by Engineer-in-Charge.

M&L for applying 3 mm thick wall care putty on new surfaces of wall and applying two coats of oil bound distemper over a coat of primer on wall complete all as specified and directed by Engineer-in-Charge.

M&L for two coats of synthetic enamel paint on new wooden surfaces over coat of pink primer including preparation of new wooden surfaces over 10cm width or girth complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of OLD wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of OLD steel surface over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

S&F framed mild steel work such as grills, grating etc with end bars forged, framed guard bars, railing, framed work of water tanks and similar work confirming to Fe-290 gde-E165 complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 20 mm bore gun metal globe or gate valve with iron wheel head screwed both sodes for iron pipe & fixed complete all as specified and directed by Engineer-in-Charge.

M&L for 25 mm thick PCC (1:2:4) type B0 using 12.5 mm graded crushed stone aggregate as in floor finishes etc. complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of plastered or plastered old surfaces of walls and applying two coats of cement base paint on walls (externally) including complete removal of existing treatment complete all as specified and directed by Engineer-in-Charge.

M&L for applying 3 mm thick wall care putty on OLD SURFACES of wall and applying two coats of oil bound distemper on wall including complete removal of existing treatment complete all as specified and directed by Engineer-in-Charge.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed by Engineer-in-Charge.

Supply and fixing pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge.

S&F anodised aluminium snap grid frame work for false ceiling size of grid 605x605mm all as specified with hangers 4mm dia GI wire (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm long complete all as specified and directed by Engineer-in-Charge.

S&F for 10 mm thick PVC insulation panels with EPS stuck to 1 mm th plain PVC sheet suitably placed in false ceiling grid made of aluminium GI/MS as per specification and drawing complete all as specified and directed by Engineer-in-Charge.

S&F 40mm thick, 2nd class hardwood planks, planed one side with butt joints and fixed with nails complete all as specified and directed by Engineer-in-Charge.

M&L for weather boarding in 2nd class softwood clean swan, plain, 20 mm thick or feather edeges and fixed with 30 mm laps joints complete all as specified and directed by Engineer-in-Charge.

M&L for 100 mm thick PCC 1:4:8, type D-2 using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed by Engineer-in-Charge.

M&L for chequered cement concrete tiles glossy finished 30cm x30cmx25mm thick with grey cement and pigment , set, jointed and pointed in neat cement slurry in floors laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

Taking down carefully aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in CM 1:3 etc. complete all as specified and directed by Engineer-in-Charge.

M & L for point wiring complete for light/ fan on independent /combine board with cable 1.5 sqmm (Nominal area) FRLS PVC insulated multistranded unsheathed copper conductor, drawn in PVC casing & capping and including pipe hooks , elbows, junction covers and junction boxes , after fixing or cutting on wall chasing for conduits and sinking's for sunken cast iron/ pressed steel terminal boxes 60mm deep ,suitable length and thickness for mounting, switches, sockets, fan regulator with 3 mm thick plastic laminated sheet cover fixed with brass screwed and cup washers, duly fixed on wall or grouting and painted with red oxide metal primer and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and directed by Engineer-in-Charge. for one light or fan point

All as per srl item No-96 here in above but for one 5A socket outlet on the same board controlled by one switch complete all as specified and directed by Engineer-in-Charge.

All as per srl item No-96 here in above but for one 3 pin 5A socket outlet on independent controlled by one switch complete all as specified and directed by Engineer-in-Charge.

Description all as per item No 96 above but for 3 pin socket outlet 15 Amps independent board with 2.5 Sqmm complete all as specified and directed by Engineer-in-Charge.

All as per srl item No-96 here in above but for One light Point controlled by two, two way switches complete all as specified and directed by Engineer-in-Charge.

M&L for submain wiring with two single core PVC insulated unsheathed , FRLS flexible copper conductor cable of size 6 sqmm and one single core PVC insulated unsheathed ,FR flexible copper conductor cable of size 4.0 sqmm as earth leade in & inculding PVC casing / non metallic rigide PVC conduit medium grade, and making good the disturbed portion at site or directed Engr-in-charge. Note. 2 runs of 6sqmm wire and 1 run of 4sqmm wire and one run of conduit/casing capping shall be mesured as one unit length for measurement and payment purpose.

S&F switch piano flush type 5/6 Amps single pole one way complete all as specified and directed by Engr - in - Charge.

S&F switch piano flush type Single pole, two way 6 Amp rating complete all as specified and directed by Engineer-in-Charge.

S&F for Switch Socket combination, 6 pin 5 and 15 amps multi purpose 2 in 01 flush type, 230 volts complete all as specified and directed by Engineer-in-Charge.

S&F for Switch Socket combination 2 in 1, 5 Amps flush type, 230 volts complete all as specified and directed by Engineer-in-Charge.

S&F Socket 2 in 1, 5 Amps flush type, 230 voltscomplete all as specified and directed by Engineer-in-Charge.

S&F bell push flush type 6 Amps 240 Volt complete all as specified and directed by Engineer-in-Charge.

S&F bell/buzzer AC 230 volts single pole complete all as specified and directed by Engineer-in-Charge.

S&F fan regulator Electronic type complete all as specified and directed by Engineer-in-Charge.

S&F in replacement ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with squirrel cage induction motor where required and connecting electrically to ceiling rose or connector block using PVC insulated and overall sheathed 3 core cables of size 0.75sqmm with flexible copper conductor all as required at site and old UNSV ceiling fan from building depositing to MES store yard/credit to contractor complete all as specified and directed by Engr-in-Charge.

S&F in replacement energy saving exhaust fan 300 mm sweep sturdy engineering plastic complete with lovers shutters, voltage 230V, 50Hz, RPM 1200, copper winding making hole in wall as it where required and , connecting electrically to ceiling rose or connector block using PVC insulated and overall sheathed 3 core cable of size 0.75 Sqmm with flexible copper conductor all as required at site and old UNSV Exhaust fan from building depositing to MES store yard/credit to contractor complete all as specified and directed by Engr-in-Charge

S&F ceiling rose surface bakelite three terminals complete all as specified and directed by Engineer - in - Charge.

S&F LED lights fitting 1x20W, 230V, AC decorative box type with drive, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge.

Taking down old Unserviceable Bldg Security light fitting and taken as credit including supply & Fix 25W New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaries with high power LED as light source along with suitable bracket including all accessories complete all as specified and directed by Engineer-in-Charge.

S&F Lamp holder insulated body with back plate for batten fittings complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of LED 9 watt pin type bulb complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.

S&F MCCB Distribution board, TP&N , vertical , double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link,415 Volts 4 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete including 3 Pole V-Tec MCCB of 100 A rating & 16kA breaking capacity, MCCB pre-fitted at factory complete all as specified and directed by Engineer-in-Charge.

Supply and fix MCB Distribution board , 240 volts single pole and neutral, double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of current carrying SPN 40-63 Amps capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amps in the MCB DB Complete with connection testing and commissioning complete all as specified and directed by Engineer-in-Charge.

Supply, laying and fixing testing cable XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volt grade of size 25 Sqmm 3.5 core complete all as specified and directed by Engineer-in-Charge.

Supply and laying and fixing testing cable XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volt grade of size 35 Sqmm 3.5 core complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches n. exc 1.5 mtr vide and 1.5 mtr in depth and getting out in soft/loose soil for laying of U/G cable complete all as specified and directed by Engr in charge

Returning filling in including spreading levelling watering and well ramming in layers complete all as specified and directed by Engineer-in-Charge.

Removing of surplus excavated material to a distance n. exc 50 mtr and deposing where directed at a level n.exc 1.5 mtr from the starting point complete all as specified and directed by Engineer-in-Charge.

M&L for sand cushioning in trenches for cable protection complete all as specified and directed by Engineer-in-Charge.

Supply & laying of bricks common brunt clay locally available best quality laying in trenches across the cable for protection complete all as specified and directed by Engineer-in-Charge.

S&F GI water tubing medium grade (ISI marked) laid in trenches including fittings as required at site and including jointing complete all as specified and directed by Engineer-in-Charge of size :- (a) GI tubing 40 mm dia bore

Material & labour for earthing complete with galvanised cast iron earth plate electrode of size 600x600x6.0mm thick busied directly in ground less than 2.25mtr deep below normal ground level as earth electrode with top edge of the earth plate not less than 1.5mtr below normal ground level, using GI 4 mm dia wire as earth continuity conductor connected to earth plate by means of welding, GI thimbles, nuts, bolts & washers continuity conductor connected to earth plate by means of welding, GI thimbles, nuts, bolts & washers all as directed including providing earth wire protection pipe GI light grade 15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover with handle of angle iron frame of size 40 x 40 x 6mm in PCC 1:3:6 adequate quantity of charcoal dust and salt and kalmi shora all around the earth plate, earth work in any type of soil remaining surplus excavated material all as required at site and specified in EP No 3 of SSR part I 2009 or directed by Engineer-in-charge and including testing on completion. (i) Main earthing lead from earth plate electrode to test point up to length of 7.5 meters length shall be deemed to be included in the unit rate quoted against this item . (ii) GI protection pipe & earthing lead beyond 7.5 meter shall be measured and paid for separately under appropriate item of Sch A part-IV (Sec-I) . (iii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department .

Material & labour for earthing complete with galvanised cast iron earth plate electrode of size 600x600x6.0mm thick busied directly in ground less than 2.25mtr deep below normal ground level as earth electrode with top edge of the earth plate not less than 1.50mtr below ground level using GI strip 32x6 mm as earth continuity conductor connected to earth plate by means of welding, GI thimbles, nuts, bolts & washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover with handle of angle iron frame of size 40 x 40 x 6mm in PCC 1:3:6 adequate quantity of charcoal dust and salt and kalmi shora all around the earth plate, earth work in any type of soil remaining surplus excavated material all as required at site and specified in EP No 3 of SSR part I 2009 or directed by Engineer-in-charge and incl testing on completion. (i) Main earthing lead from earth plate electrode to test point up to length of 7.5 meters length shall deem to be included in the unit rate quoted against this item . (ii) GI protection pipe & earthing lead beyond 7.5 meter shall be measured and paid for separately under appropriate item of Sch A part-IV (Sec-I) . (iii) On testing after completion if the desired resistance is not obtained the contractor shall redo the earthing without any extra cost to the department .

M/S A Q ENTERPRISES (BID ID -3147787)

M/S Hilal Builders (BID ID -3146729)

SAMEER CONSTRUCTIONS (BID ID -3149920)

M/S SHEIKH FEROOZ AHMAD (BID ID -3149798)

BHAT CONSTRUCTIONS AND BUILFERS (BID ID -3149986)

M/S Manzoor and Co (BID ID -3149354)

M/S Sofi Brothers (BID ID -3155075)

M/S Ghulam Hassan Lone (BID ID -3154893)