Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
Closing Date
2 Mar 2026, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
60 days
Expenditure
General
IE
1 condition
As per Tender.
30 conditions
[i] Have you attached the past performance credentials with your offer? [ii] Have you mentioned the complete address of the work premises of the OEM where Third Party Inspection (TPI) inspection will be carried out before dispatch of the material?
Bidders should confirm following certificate for Compliance (a) I have read the clause Sr. No. 32 of Instructions to tenderers and general conditions of tenders for supply contract attached with the tender regarding restrictions on procurement from a bidder of a country which shares a land border with India and on sub-contracting to contractors from such countries. (b) I certify that this bidder is not from such a country and will not subcontract any work to a contractor from such countries unless such contractor is registered with the Competent Authority. I also certify that this bidder will not offer any products/services of entity from such countries unless such entity is registered with the Competent Authority. (c) I hereby certify that this bidder full fills all requirements in this regard and is eligible to be considered. (d) I hereby acknowledge that in the event of acceptance of my bid on above certificate and if the certificate is found to be false at any stage, the false certificate would be a ground for immediate termination of contract and further legal action in accordance with the Law. (Bidders confirming this certificate for Compliance shall select Yes in the Complied column. However, in case you dont confirm above certificate for Compliance, select NO in the complied column. In such cases you are required to submit the certificate for Compliance as per Part B of Annexure- 8 Instructions to tenderers and general conditions of tenders for supply contract along-with their Bid/Offer.)
For destination.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
2 locations across West Bengal · 1,300 Numbers · 80 Set total
Parts for Abrasive Rail Cutter Machine
IE256235A
IE256235A
Limited - Indigenous
Goods
West Bengal
₹0
Exempted
2 Mar 2026
24 Feb 2026
21 items · 1,300 Numbers · 80 Set total
Cam Shaft (Pt.No.14100ZL0000) (Parts for Abrasive Rail Cutter Machine (HONDA GX 200) as per RDSO Specification No. TM/SM/01Rev-2 of 2022) [ Warranty Period: 30 Months after the date of deliv ery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CH MAN ENG. ADA, SER | West Bengal | 20.00 Numbers |
| Total | 20 Numbers | |
Piston Ring (Standrad) Pt.no. 13010Z4K004 (Parts for Abrasive Rail Cutter Machine (HONDA GX 200) as per RDSO Specification No. TM/SM/01Rev-2 of 2022) [ Warranty Period: 30 Months after the d ate of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CH MAN ENG. ADA, SER | West Bengal | 20.00 Numbers |
| Total | 20 Numbers | |
Piston Ring ( 0.50mm) Pt.No.13012ZDB003 (Parts for Abrasive Rail Cutter Machine (HONDA GX 200) as per RDSO Specification No. TM/SM/01Rev-2 of 2022) [ Warranty Period: 30 Months after the d ate of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CH MAN ENG. ADA, SER | West Bengal | 20.00 Numbers |
| Total | 20 Numbers | |
Valve set - (Parts for Abrasive Rail Cutter Machine (HONDA GX 200) as per RDSO Specificatio n No. TM/SM/01Rev-2 of 2022) [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CH MAN ENG. ADA, SER | West Bengal | 20.00 Set |
| Total | 20 Set | |
Tapped (Push Valve) (Parts for Abrasive Rail Cutter Machine (HONDA GX 200) as per RDSO S pecification No. TM/SM/01Rev-2 of 2022) [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CH MAN ENG. ADA, SER | West Bengal | 20.00 Numbers |
| Total | 20 Numbers | |
Bearing (6205) Pt.No.91001Z4X003 (Parts for Abrasive Rail Cutter Machine (HONDA GX 200) as per RDSO Specification No. TM/SM/01Rev-2 of 2022) [ Warranty Period: 30 Months after the date of de livery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CH MAN ENG. ADA, SER | West Bengal | 160.00 Numbers |
| Total | 160 Numbers | |
Silencer (Parts for Abrasive Rail Cutter Machine (HONDA GX 200) as per RDSO Specification No. TM/SM/01Rev-2 of 2022) [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CH MAN ENG. ADA, SER | West Bengal | 40.00 Numbers |
| Total | 40 Numbers | |
AIRFILTER Set Part No. 17403ZE1810 (Parts for Abrasive Rail Cutter Machine (HONDA GX 200 ) as per RDSO Specification No. TM/SM/01Rev-2 of 2022) [ Warranty Period: 30 Months after the date of d elivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CH MAN ENG. ADA, SER | West Bengal | 40.00 Set |
| Total | 40 Set | |
A type double groove pulley (3 inch, aluminium) (Parts for Abrasive Rail Cutter Machine (HON DA GX 200) as per RDSO Specification No. TM/SM/01Rev-2 of 2022) [ Warranty Period: 30 Months after t he date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CH MAN ENG. ADA, SER | West Bengal | 80.00 Numbers |
| Total | 80 Numbers | |
A type double groove pulley (3.5 inch, aluminium) (Parts for Abrasive Rail Cutter Machine (H ONDA GX 200) as per RDSO Specification No. TM/SM/01Rev-2 of 2022) [ Warranty Period: 30 Months afte r the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CH MAN ENG. ADA, SER | West Bengal | 80.00 Numbers |
| Total | 80 Numbers | |
SPARK PLUG -Pt.No.9807956846MC (Parts for Abrasive Rail Cutter Machine (HONDA GX 200) as per RDSO Specification No. TM/SM/01Rev-2 of 2022) [ Warranty Period: 30 Months after the date of de livery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CH MAN ENG. ADA, SER | West Bengal | 120.00 Numbers |
| Total | 120 Numbers | |
CARBURATOR (Pt.No.16100Z0T712) (Parts for Abrasive Rail Cutter Machine (HONDA GX 200) as per RDSO Specification No. TM/SM/01Rev-2 of 2022) [ Warranty Period: 30 Months after the date of de livery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CH MAN ENG. ADA, SER | West Bengal | 40.00 Numbers |
| Total | 40 Numbers | |
ON OFF Switch (Parts for Abrasive Rail Cutter Machine (HONDA GX 200) as per RDSO Specific ation No. TM/SM/01Rev-2 of 2022) [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CH MAN ENG. ADA, SER | West Bengal | 120.00 Numbers |
| Total | 120 Numbers | |
PISTON (standard size) Pt.No. 13101Z4V800 (Parts for Abrasive Rail Cutter Machine (HONDA GX 200) as per RDSO Specification No. TM/SM/01Rev-2 of 2022) [ Warranty Period: 30 Months after the d ate of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CH MAN ENG. ADA, SER | West Bengal | 20.00 Numbers |
| Total | 20 Numbers | |
VBELT (A32) (Parts for Abrasive Rail Cutter Machine (HONDA GX 200) as per RDSO Specificat ion No. TM/SM/01Rev-2 of 2022) [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CH MAN ENG. ADA, SER | West Bengal | 80.00 Numbers |
| Total | 80 Numbers | |
VBELT (A31) (Parts for Abrasive Rail Cutter Machine (HONDA GX 200) as per RDSO Specificat ion No. TM/SM/01Rev-2 of 2022) [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CH MAN ENG. ADA, SER | West Bengal | 120.00 Numbers |
| Total | 120 Numbers | |
PLUG CAP Part No. 30700ZDAD01(Parts for Abrasive Rail Cutter Machine (HONDA GX 200) as per RDSO Specification No. TM/SM/01Rev-2 of 2022) [ Warranty Period: 30 Months after the date of deliv ery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CH MAN ENG. ADA, SER | West Bengal | 80.00 Numbers |
| Total | 80 Numbers | |
oil seal (25x41.25x7) (Parts for Abrasive Rail Cutter Machine (HONDA GX 200) as per RDSO S pecification No. TM/SM/01Rev-2 of 2022) [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CH MAN ENG. ADA, SER | West Bengal | 240.00 Numbers |
| Total | 240 Numbers | |
Crank Shaft (Standard) Pt.No. 13310ZL0020 (Parts for Abrasive Rail Cutter Machine (HONDA GX 200) as per RDSO Specification No. TM/SM/01Rev-2 of 2022) [ Warranty Period: 30 Months after the d ate of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CH MAN ENG. ADA, SER | West Bengal | 20.00 Numbers |
| Total | 20 Numbers | |
PISTON 0.50 mm (Pt.No.13102ZDB000) (Parts for Abrasive Rail Cutter Machine (HONDA GX 2 00) as per RDSO Specification No. TM/SM/01Rev-2 of 2022) [ Warranty Period: 30 Months after the date o f delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CH MAN ENG. ADA, SER | West Bengal | 20.00 Numbers |
| Total | 20 Numbers | |
Recoil stater Set (Parts for Abrasive Rail Cutter Machine (HONDA GX 200) as per RDSO Specif ication No. TM/SM/01Rev-2 of 2022) [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CH MAN ENG. ADA, SER | West Bengal | 20.00 Set |
| Total | 20 Set | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5573728.pdf
ATTACHMENT
5587399.pdf
ATTACHMENT
5573730.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .