Repair and Renovation of store room proposed to be converted into hitech computer lab at Bhaderwah Campus of Jammu University Bhaderwah CIVIL AND SANITARY WORKS

Amount

Taking out door window & clerestory window shutters (steel or wood) including stacking at site. Area exceeding 3 sqm.

Demolishing brick work manually or by mechanical means including stacking serviceable material and disposal of Un-serviceable material within the Campus as per the direction of Engineer- in-charge in cement mortar.

Removing dry or oil bound distemper ,water proofing cement paint and like by scrapping and sand papering and preparing the surface smooth including necessary repair to scratches etc complete.

Brick work with with common burnt clay F.P.S bricks of class designation 75 in foundation, plinth and in superstructure with cement mortar 1:6 ( 1 cement : 6 sand). All work upto floor V level.

Dismantling tile works in floor/roofs laid in cement mortar including stacking of serviceable material at site and disposal of rubbish within the Campus as directed by the Engineer-in-charge.

Fixing Chowkhat in existing opening in brick /RCC wall with dash fastener /chemical fasters of appropriate size ( 3 Nos.on each vertical number of doors and 2 Nos.on vertical number of window chowkhats including cost of dash fasteners /chemical fasteners.

Half brick masonry with 2nd class common burnt clay bricks in cement motar 1:4 mix (1 cement : 4 coarse sand) in foudation, plinth and superstructure. All work upto floor V level.

Extra for providing and placing 02 Nos. 6mm dia M.S bar at every 3rd course of half bricks masonry.

15mm thick cement plaster on single/half brick wall with cement mortar 1:6 ( 1 cement : 6 sand). All work upto floor V level.

Reinforced cement concrete work in beams suspended floors roofs housing slopes upto 15 degree landings,balconia ,shelves, chajjas , linter bands ,plan window sills ,staircase and spiral staircase upto v-level including curing,centering, shuttering and finishing with 1:1.5:3 mix .(1cement :1.5 coarse sand : 3 graded stone aggregate 12.5/20mm nominal size). All work upto floor V level.

Steel reinforcement for RCC work including straightening cutting ,bending and placing in position and binding complete TMT Bars. All work upto floor V level.

Providing and applying white based cement putty of average thickness 1.0 mm of approved brand and manufacture over the complete plastered surface to prepare surface smooth and even complete

Distempering with oil bound washable distemper of approved brand to give and even shade on old work (One or more coat).

Painting with synthetic enamel paint of approved brand and manufacture of rqd color to give an even shade (One or more coat) on old work (Make Asian/Nerolac).

Providing and fixing PVC Wall panelling of approved design, quality and colour (heavy duty) (as approved by the Engineers incharge) and make including labour for fixing of panelling etc complete.

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion Powder coated aluminum (minimum thickness of powder coated 50 microns)

------------do------------For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns)

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineerin- plate etc. complete as per the direction of Engineer-in-charge. With brass cover plate minimum 1.25 mm thickness

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. Complete