REPAIR/MAINTENANCE OF CENTRAL/ PACKAGE AC PLANTS AT VARIOUS CENTRES AT NAVAL DOCKYARD MUMBAI

Ditto as per item no 1 but for AC PLANT CAP - 5 TR (C NO 20/DDHP)

Ditto as per item no 1 but for 30 TR AC PLANT (C NO 29)

Ditto as per item no 1 but for 15 TR AC PLANT (C No-33,48)

Ditto as per item no 1 but for 25.5 TR AC Plant (C No-43,Wecors)

Ditto as per item no 1 but for 7.5 TR AC PLANT (C No-48,75)

Ditto as per item no 1 but for 16.5 TR AC PLANT (C No Wecors)

Ditto as per item no 1 but for 02 X 80 TR AC PLANT (C No-51)

Ditto as per item no 1 but for 120 TR AC plant (Wecors C No 51)

Ditto as per item no 1 but for 100 TR AC plant (water chiller Plant) (Wecors C No 54)

Ditto as per item no 1 but for AC PLANT CAP 12.5 TR CHILLER PLANT (C No 85/Wecors)

Ditto as per item no 1 but for CENTRAL COOLING UNIT PACKAGE TYPE 8 TR AIR COOLED (Ductable type) (C No 74)

Ditto as per item no 2.00 but for above but 200 capacity motor

Ditto as per item no 2.00 but for above but 45 HP capacity motor

Ditto as per item no 2.00 but for above but 25 HP capacity motor

Ditto as per item no 2.00 but for above but 15 HP capacity motor.

Ditto as per item no 2.00 but for above but 7.5 HP capacity Motor.

Ditto as per item no 2.00 but for above but 5 HP capacity Motor.

Ditto as per item no 2.00 but for above but 3 HP capacity Motor.

Ditto as per item no 2.00 but for above but 2 HP capacity Motor.

Pump set of capacity 20 to 25 HP Capacity

Pump set of capacity 10 to 15HP Capacity

Pump set of capacity 5.0 to 7.5 HP Capacity

Pump set of capacity 2.0 to 3.5 HP Capacity

Crankshaft – Cat Part No. 20-F

Piston – Cat Part No. 20-H

Oil Rings – Cat Part No. 20-H/1

Shaft Seal Assembly – Cat Part No. 21

Liner Assembly – Cat Part No. 20-A to J

Oil Pump Assembly – Cat Part No. 23

Rocker Arm – Cat Part No. 24

Loader/Unloader Spring – Cat Part No. K-58

Piston Rings – Cat Part No. U-10

Suction Valve Reeds – Cat Part No. 25-A to X

Discharge Valve Reeds – Cat Part No. 17-B

Oil Filter – Cat Part No. 17-C

Suction Strainer – Cat Part No. 17-D

Oil Pressure Regulating Valve – Cat Part No. 20-F

Connecting Rod – Cat Part No. 18-A to F

Gasket Set – Cat Part No. 18-B

Compressor Safety Valve – Cat Part No. 18-D

Crankshaft – Cat Part No. 20-F

Piston – Cat Part No. 20-H

Oil Rings – Cat Part No. 20-H/1

Shaft Seal Assembly – Cat Part No. 21

Liner Assembly – Cat Part No. 20-A to J

Oil Pump Assembly – Cat Part No. 23

Rocker Arm – Cat Part No. 24

Loader/Unloader Spring – Cat Part No. K-58

Piston Rings – Cat Part No. U-10

Suction Valve Reeds – Cat Part No. 25-A to X

Discharge Valve Reeds – Cat Part No. 17-B

Oil Filter – Cat Part No. 17-C

Suction Strainer – Cat Part No. 17-D

Oil Pressure Regulating Valve – Cat Part No. 20-F

Connecting Rod – Cat Part No. 18-A to F

Gasket Set – Cat Part No. 18-B

Compressor Safety Valve – Cat Part No. 18-D

Crankshaft – Cat Part No. JS-647216

Piston – Cat Part No. 6446538

Piston Rings – Cat Part No. 2915177000

Main Sealing Bearing (Set of Two) – Cat Part No. 2911097

Liner Assembly – Cat Part No. 6642166700

Oil Pump Assembly – Cat Part No. 2635003000

Loader/Unloader Spring – Cat Part No. 22913487

Piston Pin – Cat Part No. 22919841

Suction Valve Reeds – Cat Part No. 6421898

Discharge Valve Reeds – Cat Part No. 2291324100

Oil Filter – Cat Part No. 364452700

Connecting Rod – Cat Part No. 364-49012000

Gasket Set – Cat Part No. 36447453000

Compressor Safety Valve – Cat Part No. 6446538

Returning Plate

Compressor Coil Winding

Mother Board Circuit

Crankshaft – Cat No. 6301000

Piston Rings – Cat No. 6100022

Piston – Cat No. 6100010

Piston Pin – Cat No. 6100016

Oil Scraper Rings – Cat No. 6100030

Center Bearing – Cat No. 5H-120

Connecting Rod – Cat No. 6101200

Main Sealing Bearing (Set of Two) – Cat No. 6100008

Liner Assembly – Cat No. 6101300

Oil Pump Assembly – Cat No. 6303900

Suction Valve Spring – Cat No. 6100068

Capacity Control Valve – Cat No. 61202700

Suction Valve Reeds – Cat No. 6100040

Discharge Valve Reeds – Cat No. 6101302

Oil Filter – Cat No. 6300124

Valve Plate

Gasket Set – Cat No. 201408 (Neoprene or equivalent as approved by GE)

Compressor Safety Valve – Cat No. 6302500

Shaft Seal Assembly – Cat No. 6301500

M&L for repair/rectification of refrigerant leakage in AC plant system of 7.5 TR capacity, including pumping down of existing refrigerant, leak testing by charging with dry nitrogen gas under pressure and monitoring for 24 hours to locate leakages. The work shall include rectification of leaks by brazing, replacement of gaskets wherever required, replacement of Teflon sealing of refrigerant line control valves (liquid line valves, suction valves, discharge valves), renewal of gland packing of angle valves, flaring of all connections, welding/brazing works, etc., complete. The plant shall then be vacuumized using vacuum pump and vacuum hold maintained up to 24 hours for testing and ensuring leak-free condition. Finally, recharging of recovered refrigerant gas into the plant and topping up with additional refrigerant, if required, to maintain standard operating pressure, including testing of the plant for smooth and satisfactory functioning, complete all as specified and as directed by Engineer-in-Charge. Location: C. No. 75.

Ditto, all as per Item No. 8, but for 80 TR capacity – Location: C. No. 51 / WECORS

Ditto, all as per Item No. 8, but for 40 TR capacity – Location: C. No. 51 / WECORS, Main Slog, Ground Floor

Ditto, all as per Item No. 8, but for 12.5 TR capacity – Location: C. No. 85 / WECORS, Phase-IV, 1st Floor

Ditto, all as per Item No. 8, but for 30 TR capacity – Location: C. No. 29 / MAST, 3rd Floor

Ditto, all as per Item No. 8, but for 2 × 40 TR capacity – Location: C. No. 25

Ditto, all as per Item No. 8, but for 18 TR capacity – Location: C. No. 43 / MECI Plant No. 1, 2nd Floor (Near Auto Control Bay)

Ditto, all as per Item No. 8, but for 20 TR capacity – Location: C. No. 43 / MECI Plant No. 2, 2nd Floor (Near Electric Bay / Instrumentation Bay)

Ditto, all as per Item No. 8, but for 20 TR capacity – Location: C. No. 70 / MMER, 2nd Floor

For 240 TR cooling tower – Location: WECORS

For 80 TR cooling tower – Location: C. No. 51 / WECORS, ARF Building

For 30 TR cooling tower – Location: C. No. 29 / MAST, 3rd Floor

For 18 TR cooling tower – Location: C. No. 43 / MECI Plant No. 1, 2nd Floor (Near Auto Control Bay)

For 20 TR cooling tower – Location: C. No. 43 / MECI Plant No. 2, 2nd Floor (Near Electric Bay / Instrumentation Bay)

"Supply only" PVC fills of suitable size for existing cooling tower complete all as specified and directed.

"Supply only" PVC spray Nozzels of suitable size for existing cooling tower as mentioned in complete all as specified and directed.

Supply, fixing, installation and replacement of FRP induced draft rectangular counter-flow type cooling tower of 50 TR capacity, complete with FRP basin, squirrel cage fan arrangement, vertical flange mounted extended thread type, induction motor with totally enclosed weatherproof enclosure, PVC fills, eliminator, FRP fan deck, hardware, supports and accessories, complete. The work shall include dismantling/removal of existing old cooling tower, shifting, placing and installation on the existing platform, connecting inlet and outlet condenser water pipelines, alignment, commissioning and testing, complete as per OEM manual and as directed by Engineer-in-Charge. Locations: C. No. 36 / MRAC, Ground Floor C. No. 70 / MMER, 1st Floor Make: Advance or equivalent approved.

M&L for replacement of unserviceable heavy grade MS condenser water piping of required sizes from cooling tower area, including all fittings, flanges, welding, jointing, supports and connected works, complete for smooth functioning of AC plant system, complete all as specified and as directed by Engineer-in-Charge.

150mm bore

100mm bore

80 mm bore

65 mm bore

S&F in replacement/repair of unserviceable sluice valves, flanged end type, with cast iron body, flanged and drilled ends, non-rising stainless steel spindle with hand wheel, T-head bolts and nuts, long body, pressure rating PN 1.6, conforming to IS 14846:2000, complete for the following sizes. The item shall include all necessary flange joints with rubber gasket/fibre board, bolts, nuts, washers and all accessories, complete all as specified and as directed by Engineer-in-Charge.

50 mm bore

65 mm bore

80 mm bore

100 mm bore

150 mm bore

S&F in replacement/repair of unserviceable cast iron body Y-type strainers, flanged end type, conforming to BS 10 Table F, complete with perforated stainless steel screen having 3 mm dia holes, stainless steel body and cover, with large screening area to ensure efficient performance and minimum pressure drop. The strainer shall be provided with carbon steel studs and nuts, cast iron body conforming to IS:210 Gr FG 200, including all flange joints with rubber gasket/fibre board, bolts, nuts, washers and all accessories, complete all as specified and as directed by Engineer-in-Charge.

65 mm bore

80 mm bore

100 mm bore

150 mm bore

S&F in replacement/repair in existing line of gun metal gate valves, screwed both ends, complete with iron wheel head, suitable for GI/iron pipe line, including necessary fittings such as union, socket, etc., for the following sizes complete all as specified and as directed by Engineer-in-Charge.

40 mm bore

25 mm bore

20 mm bore

S&F in replacement/repair in existing line of butterfly valves, gear operated type, with cast iron body (without lugs) conforming to IS:210 Gr FG-200, complete with CF8 stainless steel (SS-304) disc, nitrile/EPDM rubber lining, suitable for testing pressure PN-16, including all fittings, accessories, jointing materials, nuts, bolts, washers, etc., for the following sizes complete all as specified and as directed by Engineer-in-Charge.

50 mm bore

65 mm bore

80 mm bore

100 mm bore

150 mm bore

Supply/Fixing in repair/replacement of corroded steel water tubing, galvanised, Medium grade with all fittings in such as nipple, union, socket, elbow, bends &,laid in trenches, with all fitting including taking down existing rusted pipes for the following sizes all as directed and specified

25 mm bore

40 mm bore

50 mm bore

M&L for painting of central AC plant equipment by applying one coat of synthetic enamel paint (spray painting) as per approved colour code on electric panels, compressors, electric motors, pumps, pipelines and connected surfaces, including surface preparation, cleaning, filling of cavities/imperfections with suitable filler, and providing necessary identification markings, complete all as specified and as directed by Engineer-in-Charge.

AC Plant 2 × 80 TR – WECORS

AC Plant 3 × 20 TR – MECL, C. No. 43

AC Plant 3 × 30 TR – MAST, C. No. 29

AC Plant 2 × 40 TR – MOUT, C. No. 25

AC Plant 2 × 18 TR – MECL, C. No. 43

AC Plant 2 × 30 TR – MMER, C. No. 70

AC Plant 2 × 40 TR – C. No. 19

AC Plant 2 × 7.5 TR – C. No. 75

AC Plant 1 × 120 TR – WECORS

Taking down old u/s scroll compressor type of Voltas make and supply in fixing new sealed compressor 20 TR for 407(a) gas, including necessary conecting copper pipe brazing/welding work for suction line and discharge line including cabling work complete all as specified and directed

Taking down old u/s scroll compressor type of Voltas make and supply in fixing new sealed compressor 15 TR for 407(a) gas, including necessary conecting copper pipe brazing/welding work for suction line and discharge line including cabling work complete all as specified and directed

Taking down old u/s scroll compressor type of Voltas make and supply in fixing new sealed compressor 7.5TR for 407(a) gas, including necessary conecting copper pipe brazing/welding work for suction line and discharge line including cabling work complete all as specified and directed

Taking down old u/s scroll compressor type of Voltas make and supply in fixing new sealed compressor 5 TR for 407(a) gas, including necessary conecting copper pipe brazing/welding work for suction line and discharge line including cabling work complete all as specified and directed

S&F new thermometer after removing old unserviceable thermometer, complete all as specified and as directed by Engineer-in-Charge.

S&F filter drier core after removing old unserviceable filter drier core, complete all as specified. Make: Danfoss / Sporlan or equivalent approved.

S&F in replacement of unserviceable MKC-2 solenoid coil, complete all as specified and as directed. Make: Danfoss / Sporlan or equivalent approved.

Supply & fix in repair/replacement of unserviceable accessories of following all as specified and directed

Water flow switch with necessary flare fittings

Moisture liquid indicators

Pressure gauge 0-300PSI

Pressure gauge 0-150PSI

S&F water pressure gauge of approved make, any size, range up to 0–100 PSI (0–7 kg/cm²), including removing old unserviceable gauge, providing necessary fittings, fixing, testing and commissioning, complete all as specified and as directed by Engineer-in-Charge.

S&F water gauge syphon (pigtail type) with control valve, suitable for pressure gauge connection, including necessary fittings, jointing materials and accessories, complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of unserviceable LP/HP cutout pressure switch sensor, suitable for refrigeration/AC system safety control, including removal of old sensor, fixing, wiring/termination if required, testing and commissioning, complete all as specified and directed by Engineer-in-Charge.

S&F V-belts of required sizes suitable for motors, blowers, pumps or cooling tower fan drives, including removal of old worn-out belts, fixing, alignment and testing, complete all as specified and directed by Engineer-in-Charge.

S&F brass angle valve of size 1/4" × 3/8", suitable for pressure gauge/instrument line connection, including necessary fittings, jointing materials and accessories, complete all as specified and as directed by Engineer-in-Charge.

S&F replacement of unserviceable thermostatic expansion valve for 63 TR capacity, Model No. 63MVE-42-CP-100, complete.

Ditto, all as per Serial No. 33, but for 65 TR capacity, Model No. MVE-42-CP-100, complete.

Ditto, all as per Serial No. 34, but for 40 TR capacity, Model No. MVE-42-CP-100, complete.

Ditto, all as per Serial No. 35, but for 30 TR capacity, Model No. MVE-34-CP-100, complete.

Ditto, all as per Serial No. 36, but for 7.5 TR capacity, Model No. SVE-CP-100, complete.

Taking down old unserviceable aluminium rectangular supply/return air grills and S&F new aluminium rectangular grills complete with wooden frame (2nd class hardwood), volume control damper, gasket and accessories, complete.

Removing old unserviceable condenser coil fan motor with blade assembly and S&F new condenser fan motor with blade suitable for outdoor unit, complete.

M&L for framed work with structural steel sections including nuts, bolts, washers, welding, bending and drilling holes, including one coat red oxide zinc chromate primer and two coats synthetic enamel paint, complete.

Repair/replacement of high velocity commercial air curtain unit, single phase 220V, 50Hz, made of MS/CRCA sheet (18 gauge) with suction grills, aluminium fans, motor, nozzle, fittings, suitable for door opening 28"×78", complete. Make: Technocraft or equivalent.

S&F blower set including drum and shaft with anti-vibration spring isolators, blow/draw through type, suitable for existing AHU capacity/CFM, complete.

S&F volume control damper made of GI/anodized aluminium with overlapping blades to prevent leakage, as per existing size at site, complete.

S&F in repair/replacement of split type air conditioner unit of capacity 1.0/1.5 TR, anti-bacteria type, complete.

S&F leather type canvas flexible connection in AHU duct of any size as per existing at site, complete.

Taking out old unserviceable AHU body and S&F factory fabricated double skin powder coated AHU panels with 25 mm PUF insulation including door handles, supports, cutting, bending, welding/brazing and structural work, complete.

S&F in repair/replacement of AHU cooling coil of any size and number of rows as per existing, complete.

Supply, erection and fabrication of rectangular/square ducting made of 24 gauge GI sheet with stiffeners, corners, hangers, gaskets and sealing joints with approved sealant, complete.

M&L for duct insulation with nitrile rubber (Armaflex) 19/25 mm thick including surface cleaning, aluminium paint, adhesive fixing and aluminium foil laminated finish, complete.

M&L for pipe insulation by cleaning surface, applying zinc chromate primer, fixing expanded nitrile insulation 50 mm thick with adhesive and wrapping with 26 gauge aluminium cladding, suitable for pipes up to 250 mm dia, complete.

Ditto- all as per item No 49 above but 200 mm dia.

Ditto- all as per item No 49 above but 150 mm dia.

Ditto- all as per item No 49 above but 125 mm dia.

Ditto- all as per item No 49 above but 100 mm dia.

Ditto- all as per item No 49 above but 80 mm dia.

Ditto- all as per item No 49 above but 65 mm dia.

Ditto- all as per item No 49 above but 50 mm dia.

Ditto- all as per item No 49 above but 40 mm dia.

Ditto- all as per item No 49 above but 32 mm dia.

M & L for removing top and side cover panel of AHU for servicing and cleaning the cooling coil fins with nylon wire brush using chemical MAIC solution and fresh water including cleaning surfaces of the AHUs, repairing the base plate of AHU, Dampers, Blowers, blower drums including greasing of pedstal bearings, tightening of belts, blower motor electric connections, connection terminal and repairs of AHU inside insulations with fiber glass of 24kg/cum density insulation sheet and also cover with aluminium cladding of 0.71 mm thick fabricated with screws at edges, cross ribbed of insulated surface, painting the outer surface of AHU with aluminium paint of following location AC Plants complete all as specified.

AC Plant of 2 × 80 TR Capacity – C. No. 51 / WECORS, ARF Building

AC Plant of 2 × 40 TR Capacity – C. No. 51 / WECORS, Main Slog, Ground Floor

AC Plant of 1 × 12.5 TR Capacity – C. No. 85 / WECORS, Phase-IV, 1st Floor

AC Plant of 3 × 30 TR Capacity – C. No. 29 / MAST, 3rd Floor

AC Plant of 2 × 18 TR Capacity – C. No. 43 / MECI Plant No. 1, 2nd Floor (Near Auto Control Bay / Instrumentation Bay)

AC Plant of 3 × 20 TR Capacity – C. No. 43 / MECI Plant No. 2, 2nd Floor (Near Electric Bay / Instrumentation Bay)

Supply & charging of refrigerant gas R-22 as per requirement, complete. Make: Mafron/Floron/Refron/Freon or equivalent.

Supply & charging of refrigerant gas R-407A as per requirement, complete. Make: Mafron/Floron/Refron/Freon or equivalent.

Supply only compressor oil and filling/charging in compressor including topping up or replacement, complete. Make: Servo/HP/BP/Sheetal MK-04GS (York plants) or equivalent.

Supply only compressor oil and filling/charging in compressor including topping up or replacement, complete. Make: Servo/HP/BP/Sheetal N-68/Freezol 36 or equivalent.

S&F replacement of unserviceable AHU pre-filters 10 micron, size 630×500×50 mm, for AC Plant 240 TR at C. No. 51/WECORS, 3rd & 4th Floor, Main Building, complete all as specfied.

S&F replacement of unserviceable AHU pre-filters 10 micron, size 610×610×50 mm, for AC Plants 40 TR & 2×30 TR at C. No. 51/WECORS, 2nd & 3rd Floor, Main Building, complete all as specfied.

S&F replacement of unserviceable 3-phase electronic voltmeter, Class 1 accuracy, complete all as specfied.

S&F replacement of unserviceable 3-phase electronic ammeter, Class 1 accuracy, complete all as specfied.

S&F replacement of unserviceable overload relay suitable for any capacity of electric motor starter panel, complete all as specfied.

S&F single phase preventer suitable for any capacity of electric starter panel, complete all as specfied.

S&F replacement of unserviceable electronic timer type ET100, adjustable range 9–30 seconds, complete all as specfied.

S&F replacement of unserviceable 3 TF50 switchgear conforming to VDE-0660, 3-phase, 380V, 50kA breaking capacity complete all as specfied.

S&F replacement of unserviceable star-delta starter contactor AC1 type ML-1.5 with auxiliary contacts 2NO+2NC and 220V coil, complete all as specfied.

S&F replacement of unserviceable star-delta starter contactor AC1 type ML-2 with auxiliary contacts 2NO+2NC and 220V coil, complete.

S&F replacement of unserviceable star-delta starter contactor type ML-4 with auxiliary contacts 2NO+2NC and 220V coil, complete.

S&F replacement of unserviceable star-delta starter contactor type ML-6 with auxiliary contacts 2NO+2NC and 220V coil, complete.

S&F replacement of unserviceable star-delta starter contactor AC1 rating 25A type ML-12 with auxiliary contacts 2NO+2NC and 220V coil, complete all as specfied.

S&F replacement of unserviceable MCCB 200 Amp, 4 Pole, 36kA, thermal magnetic protection OL/SC, conforming to IS/IEC 60947-2, including spreader terminals and accessories, complete all as specfied.

S&F replacement of unserviceable MCCB 160 Amp, 4 Pole, 36kA, thermal magnetic protection OL/SC, conforming to IS/IEC 60947-2, including spreader terminals and accessories, complete.

S&F replacement of unserviceable MCCB 125 Amp, 3 Pole, 25kA, thermal magnetic protection OL/SC, conforming to IS/IEC 60947-2, including spreader terminals and accessories, complete all as specfied.

S&F replacement of unserviceable MCCB 100 Amp, 4 Pole, 25kA, thermal magnetic protection OL/SC, conforming to IS/IEC 60947-2, including spreader terminals and accessories, complete all as specfied.

S&F replacement of unserviceable MCCB 63 Amp, 4 Pole, 16kA, thermal magnetic protection OL/SC, conforming to IS/IEC 60947-2, including spreader terminals and accessories, complete all as specfied.

Supply, fabrication, installation, testing & commissioning of LT Panel Board / Feeder Pillar Box, indoor type, dust and vermin proof, made out of 2.0 mm thick CRCA sheet with front & back openable doors, complete with vertical aluminium busbar of capacity 500 Amps for phases and neutral, powder coated Siemens grey finish, internal wiring with suitable size stranded copper conductor cables, iron stand (minimum 2 feet height), supporting channels, cable termination, glands, accessories, etc. The work shall include dismantling/taking down of old existing panel and installation of new panel complete, suitable to accommodate the following switchgears and meters, complete all as specified and directed by Engineer-in-Charge. Location: C. No. 36. INCOMER: (i)MCCB 250A, 4 Pole, 36kA, Thermal Magnetic – 1 No OUTGOING: (i) MCCB 40A, 3 Pole, 16kA – 3 Nos (ii) MCCB 100A, 4 Pole, 16kA – 1 No (iii) MCB 4D, 13A – As required (iv) Star Delta Starter 12.5 HP (Compressor) – 3 Nos (v) Star Delta Starter 7.5 HP (AHU) – 1 No (vi) DOL Starter 5 HP – 2 Nos (vii) DOL Starter 2 HP – 1 No (viii)VAF Meter Class 1 with CTs – 1 No (ix)Indication Lamps (R-Y-B) LED – 1 Set

Supply, fabrication, installation, testing & commissioning of LT Panel Board / Feeder Pillar Box, indoor type, dust and vermin proof, made out of 2.0 mm thick CRCA sheet with front & back openable doors, complete with vertical aluminium busbar of capacity 1500 Amps for phases and neutral, powder coated Siemens grey finish, internal wiring with suitable stranded copper cables, iron stand (minimum 2 feet height), supporting channels, cable termination, glands, accessories, etc. The work shall include dismantling/taking down of old existing panel and installation of new panel complete, suitable to accommodate the following switchgears and meters, complete all as specified and directed. Location: C. No. 67. INCOMER: MCCB 630A, 4 Pole, 36kA, Thermal Magnetic – 1 No OUTGOING: (i)Panel Mounting Socket 63A, 3P+N+E (5 Pin) – 16 Nos (ii)Straight Plug/Top 63A, 3P+N+E (5 Pin) – 16 Nos (iii)VAF Meter Class 1 with CTs – 1 No (iv) Indication Lamps (R-Y-B) LED – 1 Set

Please Enable Macros to View BoQ information