Repairing and Aluminum work in Circle office and Division office, Havlock Road, Lucknow (Lot-54)

Amount

Brick work with common burnt clay non modular bricks of class 150 in foundation and plinth Cement mortar 1:6 (1 cement : 6 coarse sand)

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Mild Steel or Iron in plain work such as reinforced concrete or reinforced brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage & over lapping & hooks.

Providing and laying Reinforced cement concrete work in beam suspended floor, roofs having slope , landings, balconies, shalve, chhajjas, lintels, bands, plain window sills, staircases fillets, up to floor five level, excluding the cost of centering, shuttering and reinforcement with:1: 1.5 : 3 ( 1 cement 1.50 coarse sand 3 graded stone aggregate 20 mm nominal size )

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Supplying and fixing of Roller Blind curtains

Supply & fixing of anodised/aluminium portion having 2 mm thick aluminium section excluding coating & an average coating of 20 micron fully glazed made of aluminium door tube size 83.5x44.65 mm as vertical member & 114.00 x 44.45 mm size tube in bottom and horizontal members door chaukhat should be of aluminium tublar vertical with two openable shutters. The rate will include cost of material fixtures, 5 mm glass handles, locks, screw necessary beading & excluding cost of floor spring if required for proper completion of work as per direction of Engineer-in-charge.

SS Bolt with washer of different sizes for structural glazing / ACP Cladding each 37.00

6 mm thick clear heat strengthened glass

M/S Divyansh Traders