PROVN OF SHEDS FOR VEHICLES AT JHANSI

Amount

Excavation in trenches n.exc 1.5m deep and n.exc 1.5Mt wide and getting out in soft/loose soil complete all as specified and directed.

M&L for cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

S&F of Structural steel for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, Fe-410-W(Gde-E-250) quality-B, complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over and incl one coat of red oxide primer with and incl preparation of new surface of steel not exc 10 cm in width or girth, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for mild steel TMT bars 6mm to 8mm dia cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for RCC M-20 type (using 20mm graded stone aggregate) as in foundations, incl rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

M&L for mild steel work as in wind ties for roof including securing bolts necessary drilling, bolting etc, complete all as specified and directed.

M&L for MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment incl fabrication, Fe-410-W (Gde-E-250) quality-B, complete all as specified and directed.

M&L for Mild steel screw bolts (machine made), 8mm dia of neck, with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but n exc 10 cm long, complete all as specified and directed.

M&L for pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based corrugated / semi corrugated / trapezoidal steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and directed.

M&L for pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and directed.

M&L for old size brick work with sub-class B bricks straight or curved on plan exc 6 Mtr mean radius built in CM (1:6) complete all as specified and directed.

Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preperation of new plastered surface and applying three coats of white wash on newly plastered surfaces of wall, complete all as specified and directed.

Returning filling in trenches including spreading leveling and well ramming with water complete n.exc 25 cm thick in each layer in soft/loose soil complete all as specified and directed.

M&L Hardcore (Broken stone or boulders) of guage exc 63mm but n exc.100mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L for moorum/red bajri in floors or paving laid in layers n exc 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for PCC 1:5:10 type E-2 using 40mm graded stone aggregate as in sub-base, floors paving etc complete all as specified and directed.

M&L for 55 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in sub-base, floors paving etc complete all as specified and directed.

M&L for Granolithic concrete 1:1:2 floor topping 30mm thick; laid over cement concrete subfloors etc. incl over brushing neat cement slurry @ 3.00 Kg/Sqm and finished to an even and fair surface complete all as specified and directed.

S&F 28 mm glass dividing strips, 3mm thick, inserted in position and conform to design, complete all as specified and directed.

M&L for cement concrete type B-1, 1:2:4 using 20 mm graded stone aggregate as in coping complete all as specified and directed.

S&F 110 mm PVC SWR pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Shree Jee Associates

FTH Traders

M/sDaljeet singh keer

Khushi Muskan Engineer & Developer

HARNAM SINGH ANIL SINGH

M/S Kesav Dev Agarwal

sachinder singh

M/s JS Constructions

M/S NASIM AND CO.

M/S BABA CONSTRUCTION

M/S ARVIND SINGH THEKEDAR

PARAS BROTHERS

M/s R.V. Constructions